Fp1 nakup rabljenega (152)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Krmiljenje 3 osi, aktivno krmiljenje poti Heidenhain TNC 123 Število obratov 40 - 2000 min⁻¹, geometrijsko stopnjeni direktni pogon s 16 prestavami za največji navor / rezkalno moč Pomik 5 do 500 mm/min, brezstopenjsko nastavljiv Ncodpfxjyg I Nfj Afmju Hitri pomik 1,2 m/min Izvlečna puša, vertikalni hod 60 mm, SK40, privijalni navoj M16 Osi X/Y/Z: 300/160/340 mm Nagibna miza 600 x 210 mm, največja obremenitev 200 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed As-New CONDITION Technical Data: >> Year of manufacture: 1987 Machine no. 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Automatic central lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalogue Ncodpfxsu R D I Se Afmeu About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in an as-new, original condition. The machine has very minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be infinitely adjusted on all three axes, and the machine also features rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can enter dimensions which the machine then approaches automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically inspected. Thanks to the Heidenhain digital readout, working with the machine is easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Nsdpfx Aju T D Nrjfmocu Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Technical Specifications: Nedpfxju Nvwvo Afmocu - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: - 3-axis digital readout Heidenhain TNC111 - Coolant system - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed, in Excellent Condition, CE Compliant Technical Data: >> Year of manufacture: 1992, Machine No. 2102-6209 >> Fixed angle table (freshly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes Nedpfxsxdi Ivj Afmscu >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle slide, adjustable by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, CE compliant, in very good condition. The machine exhibits minimal backlash and all spindles move smoothly. The milling machine operates very quietly even at maximum speeds. A special feature is that the electrical cabinet is connected to the machine via a plug, which makes transportation easier. In this newer FP1 model, the feed on all three axes is infinitely variable, and there is also rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain positioning control, you can enter the dimensions and the machine will automatically approach them. This FP1 was used in a training workshop and was only occasionally operated. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout facilitates your work and delivers even higher accuracy. Take advantage of the opportunity to view and test this machine on site under power.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis Heidenhain ND 780 digital readout - Excellent Condition! Technical Data: >> Machine No.: 55249/08, Year: 2010 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm Nedpfxexu Hbhe Afmjcu >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar thread S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic machine vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the Machine: Offered is a Deckel FP1 universal milling machine, professionally repowered by FPS and in like-new condition. The accessories include a hydraulic machine vice with swivel base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout enables easier and more precise work. Take the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis K&C Digital Readout (new) and stepless feed on 3 axes – Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine No.: 2102-2444 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout (K+C) newly installed, manufacturer’s warranty and manual included. Display features: set reference points, zero points, enter coordinates, mm/inch conversion, absolute/incremental coordinates, circle functions, hole array, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts list Ncedpjtwlwzsfx Afmou About the Machine: Offered is a universal milling machine Deckel FP1, built in 1983, in excellent condition. The machine has very little backlash, and all leadscrews move smoothly. Even at maximum speed, the milling machine runs quietly. On this newer FP1 model, the feed is continuously variable on all three axes, plus rapid traverse is available in all axes. The FP1 was located in a training workshop and used only occasionally. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 Njdovb Ud Uspfx Afmocu >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: Ncedpfeu Racrex Afmou >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C (new) and 3 stepless feed drives – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2867 >> Swivel-tilt rotary table (newly planed) >> Speed range: 40 – 2000 rpm >> Stepless feed drive in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW Ncodpfst Aarpsx Afmou >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quills – SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Readout features: setting reference points, zero points, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole arrays, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1985, in outstanding condition. The machine has minimal handwheel backlash and all spindles move smoothly. Even at maximum spindle speeds, the machine runs very quietly. On this newer FP1 model, feed drive is steplessly adjustable on all three axes, and rapid traverse is also available. The oil has been changed. Machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power onsite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Digital Readout K&C, infinitely variable feed, painted in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable 100 mm on column >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 Njdpst Aav Iofx Afmecu >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout K&C newly installed with manufacturer's warranty and operating manual. Display unit: Reference points, zero setting, coordinate input, mm/inch switch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP1 in very good condition. The machine has very little backlash and all spindles move smoothly. All bellows have been replaced. On this newer FP1 model, feed is infinitely variable on two axes; the machine is also equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically inspected. The new K&C digital readout makes working easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout, Original Condition!!! Ncjdpju Nvxmofx Afmeu Technical Data: >> Machine No. 56560/08, year of manufacture approx. 1975 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: Offered here is a universal milling machine Deckel FP1 in very good original condition. The Deckel has minimal backlash in the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.

Stanje: generalkompletno obnovljen (rabljeno), Št. E1053167 D-motor: OR19-2 Hitrotekač za Deckel FP1 2770 vrt/min Popolna generalna obnova in novo prebarvano. Nsdpfx Asylcumsfmjcu Varnostno stikalo ter odstranljiv in nastavljiv zaščitni pokrov skrbita za varnost.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, Nsdpfxopy Elde Afmecu We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: rabljeno, Protinastavek in adapter za rezkalni stroj za horizontalno rezkanje Protinastavek in adapter (kontradržalo) za rezkalni stroj DECKEL Ncjdpoxcbl Dsfx Afmeu (Nosilni blok z lastovičjim vpenjalnim adapterjem DECEL FP1 + FP2) Tip 9570 Širina ozkega lastovičjega repa: ca. 72 mm Širina širokega lastovičjega repa: ca. 88 mm Višina lastovičjega repa: ca. 15 mm Dolžina (nosilni blok): 133 mm Širina (nosilni blok): 50 mm Skupna višina (nosilni blok): 105 mm Ležajna izvrtina: Ø 17 mm (z bronasto ležajno pušo) Razdalja osi izvrtine do nosilne površine lastovičjega repa: ca. 82,5 mm (višina konice) - Adapter, primeren za lastovičji rep in vpenjalno površino, povečanje za 22,5 mm na višino konice 105 mm Skupna dolžina (lastovičja letev): 635 mm Teža: 3,8 kg zelo dobro stanje

Leto izdelave: 1980, stanje: zelo dobro (rabljeno),

Stanje: dober (rabljeno), Offertă o mașină de frezat universală DECKEL FP1 aktiv, parțial recondiționată, cu afișaj digital Heidenhain pe 3 axe TNC 113 și masă rotativă divizor cu mandrină cu trei bacuri. Construcția compactă o face ideală pentru ateliere hobby mai mici sau garaje. Producător: DECKEL Tip: FP1 Nr. de serie: 2102-3314 - Cursă de lucru X/Y/Z: 300x160x340 mm - Turație arbore principal: 40–2000 rpm - Avans continuu pe toate cele trei axe - Avans rapid pe toate cele trei axe - Cap de frezat vertical - Reglare verticală 100 mm - Dispozitiv de frezare orizontală - Afișaj digital Heidenhain 3 axe TNC113 - Sistem de răcire - Masă rotativă divizor cu mandrină 3 bacuri Putere totală instalată: 1,9 kW Ncodpfexmgguex Afmeu Dimensiunile utilajului L x l x h: 1,30 x 1,10 x 1,60 m Greutate: aprox. 850 kg Prețul este net, ex works, încărcare inclusă. Stare: folosită.

Stanje: pripravljen za uporabo (rabljen), Max. speed: 2000 rpm, with operating manual. Ncsdpfxelbmtge Afmeu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Zelo lep Deckel Maho FP1 Iz zadnjega modela! Iz instrumentne delavnice. Nedpfx Afjywlaksmjcu Unikatni STROJ Z pomikom po Y-osi

Stanje: dober (rabljeno), Deckel FP1 frezarka, wyprodukowana w Niemczech przez Friedrich Deckel AG, Monachium. Maszyna jest sprawna i w pełni operacyjna. W celu uzyskania dodatkowych informacji prosimy o kontakt. Ncsdpfx Afow Amaismeu

Stanje: novo, Leto izdelave: 2026, Stanje: novo Leto izdelave: 2026 Številka skladišča: 070223 Dobavni rok: september 2026, vmesna prodaja pridržana Država izvora: Turčija Cena: 20.100 € Leasing mesečna rata: 385,92 € Tlačna moč: 10 t Nazivna tlačna moč pri 1,4 mm Dolžina mize: 270 mm Širina mize: 370 mm Prehodna odprtina na mizi: 100 mm Hod: 1–40 mm Število hodov: 200 /min Vodila bata: 4 Nastavljivost bata: 35 mm Luknja za zatič v batu: 25 mm Izvap: 160 mm Višina vgradnje: 180 mm Motor: 0,75 kW Dolžina: 1170 mm Širina: 1180 mm Višina: 1700 mm Teža: 590 kg Ncsdpfx Aewirqgefmeu Varjena jeklena okvirna konstrukcija 4-kratno vodenje bata Pnevmatska kombinacija sklopke in zavore Zaščitno ohišje s svetlobno zaveso in stranskimi vrati Dvoročno in nožno pedalno upravljanje Ročna nastavitev hoda Ročna nastavitev bata Spremenljivo število hodov preko frekvenčnega pretvornika Načini delovanja: * Nastavitveni način * Aktivacija z dvema rokama * Aktivacija z nožnim pedalom * 2-taktno delovanje preko svetlobne zavese * Neprekinjeno delovanje Zaslon na dotik za: * Števec hodov s predizbiro za neprekinjeno delovanje * Nastavitev števila hodov * Intervali in trajanje mazanja * Alarmna sporočila * Smer vrtenja motorja * Nadzor vhodov in izhodov 2 prosti preklopniki za priključitev perifernih naprav Samodejno centralno mazanje Oprema skladno s CE predpisi Opcije: Vzmetne podloge € 132,- Prilagoditvena plošča € 220,- Simbolne fotografije, prikazana vključuje opcijsko dobavljivo prilagoditveno ploščo

Stanje: novo, Leto izdelave: 2026, Stanje novo Leto izdelave 2026 Številka zaloge 070224 Dobavni rok september 2026, vmesna prodaja pridržana Država izvora Turčija Cena 25.700 € Leasing obrok 490,87 € Pritisna sila 15 t Nazivna pritisk pri 1,4 mm Dolžina mize 320 mm Širina mize 490 mm Prehodna odprtina v mizi 130 mm Hod 1–40 mm Število hodov 200 1/min Vodila bata 4 Nastavitev bata 40 mm Luknja za čep v batu 30 mm Izrast 210 mm Vgradna višina 215 mm Motor 1,5 kW Dolžina 1160 mm Širina 1180 mm Njdpfxjwirlds Afmecu Višina 1730 mm Teža 922 kg Varjena jeklena okvirna konstrukcija 4-kratno vodilo bata Pnevmatska sklopka-zavorna kombinacija Zaščitno ohišje z varnostnimi svetlobnimi zavesami in stranskimi vrati Upravljanje z dvema rokama in stopalko Ročna nastavitev hoda Ročna nastavitev bata Spremenljivo število hodov preko frekvenčnega pretvornika Načini delovanja: * Nastavitveni način * Dvoročni zagon * Zagon s stopalko * 2-taktno delovanje preko svetlobnih zaves * Neprekinjeno delovanje Zaslon na dotik za: * Števec hodov s prednastavitvijo za neprekinjeno delovanje * Nastavitev števila hodov * Intervali in trajanje mazanja * Alarmna sporočila * Smer vrtenja motorja * Nadzor vhodov in izhodov 2 prosti krivulji za povezavo periferne opreme Avtomatsko centralno mazanje Oprema v skladu z zahtevami CE Ilustrativne fotografije, prikazana tudi opcijsko dobavljiva pritrdilna plošča

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks after order Country of origin: Turkey Price: €92,600 Leasing rate: €1,750.14 Pressing force: 160 t Nominal pressing force at 6 mm Table length: 750 mm Table width: 1100 mm Drop-through hole in table: 230 mm Stroke: 1 - 172 mm Strokes per minute: 45 1/min Ram guides: 6 Ram adjustment: 100 mm Pin hole in ram: 80 mm Throat depth: 375 mm Installation height: 540 mm Motor: 11 kW Length: 1,890 mm Width: 1,950 mm Height: 3,650 mm Weight: 15,500 kg Welded steel frame construction 6-way ram guidance Pneumatic clutch-brake combination Safety enclosure with light barrier and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable strokes per minute via frequency inverter Operating modes: • Setup mode • Two-hand operation • Foot operation • 2-cycle operation via light barriers • Continuous operation Touchscreen for: • Stroke counter with preselection for continuous operation • Stroke rate adjustment • Lubrication intervals and runtime Njdpfxewiqu Rj Afmocu • Alarm messages • Motor rotation direction • Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipped in accordance with CE regulations Sample photos, illustration incl. optionally available clamping plate OPTIONS: • Vibration pads €192.00 • Clamping plate on request • Hydraulic overload protection on request etc.

Stanje: novo, Condition new Delivery time approx. 14 - 16 weeks from order Country of origin: Turkey Price: €83,200 Leasing rate: €1,572.48 Press force: 130 t Nominal press force at 4.5 mm Table length: 650 mm Table width: 950 mm Table through-hole: 220 mm Stroke: 1 - 132 mm Ncedpfowiqn Rox Afmou Strokes per minute: 50 Ram guides: 6 Ram adjustment: 95 mm Ram bore: 70 mm Throat depth: 325 mm Installation height: 500 mm Motor: 11 kW Length: 1,800 mm Width: 1,725 mm Height: 3,020 mm Weight: 8,000 kg Welded steel frame construction 6-fold ram guide Pneumatic clutch-brake combination Safety enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency inverter Operating modes: * Setting mode * Two-hand activation * Foot pedal activation * 2-cycle operation via light barriers * Continuous operation Touchscreen for: * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor rotation direction * Monitoring of inputs and outputs 2 free cams for peripheral device integration Automatic central lubrication Equipped according to CE regulations Sample images, shown with optionally available clamping plate OPTIONS: Vibration pads €192.00 Clamping plate on request Hydraulic overload protection on request etc.

Stanje: dober (rabljeno), Leto izdelave: 1982, x-premik 300 mm y-premik 160 mm z-premik 340 mm Nedpfx Ajzfql Sjfmecu Nosilec orodja SK40 Število vrtljajev 40–2000 1/min Krmiljenje Aktiv HEIDENHAIN Velikost mize 600 x 210 mm Skupna potrebna moč 2 kW Teža stroja pribl. 0,73 t Potreben prostor pribl. D׊×V 1,20x1,10x1,60 m Iz tehnične šole - Avtomatski podajalnik v oseh X in Z, os Y - Naprava za hlajenje - Primež - Delovna svetilka