Karuselni stružnici – Dvojni nosilci – 2000–2999 mm premer mize nakup rabljenega (9)

Stanje: rabljeno, Leto izdelave: 1961, Največji premer struženja: 4200 mm Premer planske plošče: 3700 mm Največja višina struženja: 2600 mm Največja teža obdelovanca: 35 t Moč: 80 KM DIGITALNI PRIKAZ KRMILJENJA Itsdpfx Afsuddnvs Tjb Največji premer s prečnimi suporti: 4200 mm Največji premer struženja s stranskim suportom: 3900 mm Največja višina struženja nad plansko ploščo: 2500 mm Stranski suport 1 vertikalni brusilni drsnik: 1200 mm hoda (izven obratovanja) 1 stružni drsnik: 1400 mm hoda Samo za natančne aplikacije, ni primerno za težja groba stružna dela.

Stanje: rabljeno, Leto izdelave: 2000, Faceplate diameter: 3200 mm Swing diameter: 3500 mm Turning height: 2200 mm Dimensions (L x W x H): 7730 x 6240 x 6700 mm Control type: 840 D sl Voltage: 3 x 400 V Frequency: 50 Hz Rotational speed: 0.8 - 40 rpm Max. turning diameter: 3500 mm Total power requirement: 51 kW Machine weight approx.: 86 t Technical Data Machine type: CNC Vertical Lathe Manufacturer: Rafamet Year of manufacture: 1973, conventional Completely overhauled with control retrofit in 2010 Control system upgrade in 2016 Control: Siemens 840 D Sl Condition: Very good Faceplate Faceplate turning diameter: 3,200 mm Number of speed ranges of faceplate: 3 (infinitely variable) Speed ranges of faceplate: 0.8 - 40 rpm Range I: 0.8 – 3 rpm Range II: 0.8 – 11 rpm Range III: 0.8 – 40 rpm Workpiece Machining Max. turning diameter: 3,500 mm Max. turning height of workpieces above the faceplate: 2,200 mm Vertical Slides Minimum axis distance between the vertical slides: 470 mm Maximum ram travel of left vertical slide: 985 mm Maximum ram travel of right vertical slide: 985 mm Axis feeds – stepless feed max.: X1,2 3 m/min max.: Z1,2 2.5 m/min Ram not swiveling Itsdpfsuddcgex Af Tob Cross Rail – Slide Rapid traverse of cross rail: 600 mm/min Maximum distance between cross rail and faceplate: 2,300 mm Load Capacities + Permissible turning force when machining workpieces with a turning diameter of 2,000 mm and a rotational speed of 20 m/min: 8,000 kg + Maximum chip cross-section for steel workpieces Fz = 50 kg/mm² at a cutting speed of 20 m/min for all slides: 45 mm² + Maximum chip cross-section for steel workpieces Fz = 50 kg/mm² at a cutting speed of 20 m/min for one vertical slide at max. ram length 985 mm: 2.5 mm² + Maximum chip cross-section for cast iron workpieces HB = 160 kg/mm² at a cutting speed of 20 m/min for all slides: 120 mm² + Maximum chip cross-section for cast iron workpieces HB = 160 kg/mm² at a cutting speed of 20 m/min for one vertical slide at max. ram length 985 mm: 22.5 mm² + Maximum allowable workpiece weight at 0.8 – 3.15 rpm: 17,500 kg + Maximum allowable workpiece weight at 4 – 40 rpm: 7,500 kg Electric Motors Power and speed of main drive motor: 51 kW Feed motor power of: - Vertical slide beam (2 units): 16 Nm (gear ratio 1:10) - Ram (2 units): 16 Nm (gear ratio 1:12) Power and speed of hydraulic pump drive motors (2 units): 3 kW – 1,500 rpm Power and speed of clamping hydraulic motor for vertical slide beam: 1.5 kW – 1,500 rpm Power and speed for cross rail adjustment: 15 kW – 1,500 rpm 3.5 Specifications for compressed air supply and other consumables Compressed air connection: 6 bar, oil- and water-free 3.6 Energy consumption, conditions Voltage: 3 x 400 V Control voltage: 24 V Frequency: 50 Hz Protection: 315 A Main dimensions and weight of the machine Length: 7,730 mm Width: 6,240 mm Height: 6,700 mm Weight: 85,750 kg Tooling: Capto 60 interface Non-driven Front plate Front plate turning diameter: 3,200 mm Chuck plate diameter: 3,400 mm Number of rotational steps of the front plate: 3 (infinitely adjustable) Speed ranges of the front plate...

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 17051, višina struženja: 1.600 mm, teža obdelovanca (maks.): 10.000 kg, premer struženja: 2.500 mm, dolžina podajanja os X: 1.395 mm, dolžina podajanja os Z: 1.165 mm, premer čelne plošče: 2.260 mm, največja hitrost vrtenja: 150 obr/min, GORBREX TKV 525 CNC (Base Machine: SEDIN 1525 CNC) Year of Manufacture / General Overhaul: 2021 Serial Number: 17051 Manufacturer / History This machine is structurally based on the SEDIN 1525 CNC and was technically overhauled, modernized, and equipped with new electrical systems and CE documentation by GORBREX Machinery Trade Sp. z o.o. (Poland) in 2021. According to the documentation, delivery and commissioning at the customer’s site also took place in 2021. — Machine Type Double-column vertical turning lathe (vertical turning machine) Suitable for heavy turning operations, drilling, facing, boring, internal and external machining of large workpieces. — Key Technical Data (from documentation) • Table diameter: 2,260 mm • Max. machining diameter: 2,500 mm • Max. workpiece height: 1,600 mm • Max. workpiece weight: • up to 10,000 kg at 1–25 rpm • up to 5,000 kg at 25–100 rpm • Table speed range: 1 – 150 rpm Itjdex U Trcopfx Af Tsb • Feed range: 1 – 5,000 mm/min • Rapid traverse: up to 5,000 mm/min • Slide travel: • Horizontal (X): 1,395 mm • Vertical (Z): 1,165 mm • Number of supports: 2 (left / right) • CNC-controlled axes: X and Z • CNC control: Siemens Sinumerik 840D SL • Main drive power: 75 kW • Machine weight: approx. 35,500 kg • Connection: 3 × 380 V / 50 Hz — Equipment (according to documentation) • 2 vertical tool supports (left / right) • Automatic central lubrication • Ball screws on feed axes • Rigid cast construction for heavy-duty machining • CE Declaration of Conformity • Complete technical documentation (German) • Sinumerik programming manual • Electrical diagrams and installation documents • Operator panel with CNC monitor • Foundation wedges and setup accessories — Condition • Technically overhauled and modernized in 2021 • Well-maintained, both visually and technically • Machine is assembled and generally ready for demonstration Dismantling, loading and transport of the machine are entirely the responsibility and at the expense and risk of the buyer. The seller accepts no liability for any damage arising in connection with disassembly, loading or transport.

Stanje: novo, Leto izdelave: 2026, Machine in AS-NEW condition! Geometry acceptance as per DIN8609 12-month warranty covering all damages Control: conventional/PLC Siemens faceplate control 4-axis digital display: Fagor/ACU-RITE or Heidenhain Iedpfx Afocht Tne Tstb Complete electrical equipment 230/400V, 50Hz, German make, CE compliant Technical data: Max. workpiece dimensions: - Diameter (mm): 3,200 - Height (mm): 1,600 (up to 2,600 possible*) Max. workpiece weight (kg): 16,000 Faceplate diameter (mm): 2,800 Max. stroke length: - Horizontal (mm): 1,720 - Vertical (mm): 1,200 Number of faceplate speed stages: 18 Faceplate rotational speeds PLC Siemens or stepless (2 stages) Lenze control (rpm): 1.6–63 / 0–80 Cross slide feed range: 18 stages Crossrail traverse speed (mm/min): 360 Max. rapid traverse of support (mm/min): 2,000 Max. faceplate torque (kN/m): 67 Main drive power (kW): 55/75 Dimensions (LxWxH, mm): 5,490 x 7,075 x 5,100 Weight (kg): 43,000

Stanje: novo, Leto izdelave: 2026, TECHNICAL DATA: Machining diameter: 2,500 mm Itedpfocxlylsx Af Tjb Max. workpiece height: 1,600 mm Max. workpiece weight: 16,000 kg Chuck diameter: 2,240 mm Chuck speed range: 0–100 rpm Max. chuck torque: 50,000 Nm Main drive power: 75 kW EQUIPMENT: - 1–2 slide versions - Capto quick-change system / triple tool holder - Telescopic covers - Centralized lubrication system SKF/VOGEL - 12-month warranty - Complete electrical equipment 230/400V, 50Hz, Made in Germany, CE-compliant OPTIONS: - Machine enclosure - Chip conveyor - Coolant preparation - Turret head - Driven tools - ... CONTROL: FAGOR or SIEMENS Delivery time: approx. 7–9 months OTHER: Geometry acceptance according to DIN 8609

Leto izdelave: 1989, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Swing diameter: up to 2800 mm Faceplate diameter: 2500 mm Height under crossrail: max. 2200 mm Itjdpfx Aemxkzajf Tsb Workpiece weight: max. 15,000 kg Slides: 2 x vertical, 1 x horizontal MACHINE DETAILS Main drive: approx. 55 kW Total weight: approx. 56 t

Stanje: novo, Leto izdelave: 2025, višina struženja: 2.400 mm, premer vrtljive mize: 2.500 mm, obremenitev mize: 30.000 kg, premer mize: 2.500 mm, trajanje garancije: 12 meseci, hitrost mize: 112 mm/min, REM Vertikalni stružni stroj (Vertikalni stružni stroj - VTL) Itjdsv Hngtjpfx Af Tsb PREMER STRUŽENJA SCR SCR 27 ROČNI Posebej izdelan pri REM za: - SREDNJO IN VZHODNO EVROPO - BLIŽNJI VZHOD - LATINSKO AMERIKO - RAZVOJNE DELAVNICE IZPOSTAVLJENO: - NEPREMAGLJIVA CENA - ZELO UČINKOVIT STROJ - PRIMEREN ZA DELAVNICE Z MANJŠO IN SREDNJO SERIJSKO PROIZVODNJO - BREZ MENJALNIKOV - BREZ CNC KRMLJENJA - BREZ DRAGIH TEHNOLOGOV IN OPERATERJEV - ENOSTAVNO VZDRŽEVANJE - ENOSTAVNO UPRAVLJANJE - HITRO UČENJE UPORABE Tehnične podrobnosti: Premer čelne plošče (mm): 2500 mm Maksimalni premer struženja (mm): 2500+ do 3000 mm Višina obdelave: 2400 mm Največja teža obdelovanca: 30 ton Upravljanje: klasično (ročno) DIGITALNI PRIKAZ položaja za vsako os Opomba: Stroj izdelamo po naročilu in ga lahko prilagodimo vašim specifičnim zahtevam.

Stanje: novo, Leto izdelave: 2025, višina struženja: 2.800 mm, teža obdelovanca (maks.): 30.000 kg, premer struženja: 3.300 mm, dolžina pomika po osi Y: 2.500 mm, dolžina podajanja os Z: 1.500 mm, premer čelne plošče: 3.000 mm, hitrost pomika os X: 4 m/min, hitrost podajanja osi Y: 4 m/min, hitrost podajanja os Z: 4 m/min, premer vrtljive mize: 3.000 mm, hitro pomikanje X-os: 6 m/min, hitri pomik os Y: 6 m/min, hitri pomik na osi Z: 6 m/min, največja hitrost vrtenja: 92 obr/min, vrtljajska hitrost (min.): 1 obr/min, obremenitev mize: 30.000 kg, premer mize: 3.000 mm, REM Vertikalni stružni stroj (Vertikalni stružni stroj na stružnicu) Obseg struženja SCR 33 ROČNI s sistemom za digitalni prikaz (DRO) Posebej izdelano pri REM za: - Srednjo in vzhodno Evropo - Bližnji vzhod - Latinsko Ameriko - Delavnice v razvoju POUDARKI - NEPREMAGLJIVA CENA - ZELO UČINKOVIT STROJ - PRIMEREN ZA DELAVNICE Z MAJHNIM ALI SREDNJIM OBSEGOM PROIZVODNJE - BREZ MENJALNIKOV - BREZ CNC KRMILJENJA - NI POTREBNA DRAGA TEHNOLOGIJA ALI STROKOVNJAKI - ENOSTAVNO VZDRŽEVANJE Isdpfx Asv Ilg Hsf Tetb - ENOSTAVNO UPRAVLJANJE - ENOSTAVNO ZA UČENJE Tehnični podatki: Premer planske plošče (mm): 3000 Maks. premer struženja (mm): +300 Višina obdelave: 2800 mm Maks. teža obdelovanca: 30 ton Klasično upravljanje DIGITALNI PRIKAZ ZA VSE OSI

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1978, CNC Vertical Lathe Brand: BERTHIEZ Model: TFM 200 Year: 1978/1995 CNC: NUM 1062T / SOMAB PL+S3 (Teaching, ISO, and Conversational modes) Specifications: Table diameter: 2,000 mm Max swing: 2,300 mm Machinable height: 2,000 mm Table load capacity: 20 t Table rotation speeds: 1.6 to 200 rpm Table motor power: 55 kW Ram cross-section: 200 x 200 mm Standard table height from floor: 731 mm Vertical travel of crossrail: 1,300 mm Crossrail traverse speed: 400 mm/min Vertical ram travel: 1,600 mm Carriage travel right of spindle: 1,280 mm Carriage travel left of spindle: 400 mm Continuous feed range: 0.05 to 24 mm/rev In CNC-controlled mode: 0.2 to 360 mm/min Rapid traverse speed: 6,000 mm/min Isdpfxew Adpbe Af Tjtb Equipped with: 12-position tool changer Chip conveyor