Struženje Stružnica Db 450 nakup rabljenega (10.398)

Stanje: rabljeno, številka stroja/vozila: 2004.682, Ponujamo v prodajo tračno žago tipa BAS 450 DB, proizvajalca ELEKTRA BECKUM. Todpfx Asz S Ndrsnped Če imate dodatna vprašanja o izdelku ali ste zainteresirani za nakup, nas prosimo kontaktirajte.

Stanje: kot nova (razstavni stroj), RAZSTAVNI STROJ Na prodaj je skoraj nov stroj HAGER HDE 300 za struženje, z močjo motorja 3 KM. Razstavni stroj je v originalnem stanju, zato imate polno garancijo. Tehnični podatki: - Višina med centroma 300 mm - Razdalja med centroma 1.000 mm (razširljivo*) - Elektronsko upravljanje hitrosti (100-450 / 300-1.100 / 750-2.700 vrt/min) - Votla vretena D = 20 mm z notranjim stožcem MK3 - Hod vretena 150 mm - Motor 3 KM / 400 V - Teža 276 kg Tsdpotpnu Rsfx Anpjd Stroj se nahaja v A-5431 Kuchl in si ga lahko ogledate kadar koli med našimi odprtimi urami. Pridržujemo si pravico do prodaje medtem. Če ste zainteresirani za ta stroj, vas prosimo, da v kontaktni obrazec vnesete svoje popolne podatke o naslovu, da bomo lahko obravnavali vašo zahtevo. Hvala vam, vaše NEUREITER Team Povezani izrazi: stroj za struženje, stružnica, vrtalni stroj, stružni stroj, struženje, stružni nož, obdelava lesa, strojno obdelovanje, stroj, Hager Referenca: R-A0117

Stanje: kot nova (razstavni stroj), RAZSTAVNI STROJ Naprodaj je skoraj nov stroj HAGER HDG 250, stroj za struženje z razdaljo med centri 1.000 mm. Razstavni stroj je v originalnem stanju, zato imate polno garancijo. Tehnični podatki - Višina med centri 250 mm - Razdalja med centri 1.000 mm - Priključek vretena M33 x 3,5 s koničnim vretenom MK3 in utorom za varnostno zaščito ASR (Euro) Tedpfx Anetpnykeped - Premer vretena 20 mm - Gibljiva glava 150 mm / MK3 - Ročna opora, zgornji del 300 mm - Teža 270 kg - Dolžina x širina 1.800 x 640 mm - Motor 2,2 kW / 3 KM Stroj se nahaja v A-5431 Kuchl in si ga lahko ogledate kadar koli v času našega delovnega časa. Pridržujemo si pravico do vmesne prodaje! Povezani izrazi: stroj za struženje, stružnica, stružni stroj, struženje, orodje za struženje, obdelava lesa, struženje, stroj, Hager Referenca: R-A0117

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, COURSE ROOM MACHINE For sale is a used Hager HDG 250 woodturning lathe with a center height of 250 mm. The machine was in use in our in-house turning courses, is in very good condition, and has been refurbished and inspected by our qualified personnel. (Fully operational) Technical data: - Center height: 250 mm - Distance between centers: 1,000 mm Todpfxortqi Io Anpsd - Spindle thread: M33 x 3.5 with MK3 taper and ASR (Euro) anti-rotation groove - Spindle bore (diameter): 20 mm - Tailstock quill: 150 mm / MK3 - Tool rest (top): 300 mm - Weight: 270 kg - Dimensions (L x W): 1,800 x 640 mm - Motor: 2.2 kW (3 HP) - Speed range: 150 - 2,700 rpm The lathe is located in A-5431 Kuchl and can be inspected during our opening hours at any time. Subject to prior sale! If you are interested in this machine, please include your complete address details in the contact form so that we can process your inquiry seriously. Thank you! Best regards, your NEUREITER Team Related terms: woodturning lathe, lathe, turning machine, woodturning, turning, turning tools, wood turning, machine Reference: DH25500-K

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE For sale is an as-new Drechselmeister TWISTER XL wood lathe, turning machine with a centre distance of 800 mm. The exhibition machine is in its original condition, so you receive the full warranty. Technical Data - Centre height: 250 mm - Swing over bed: 490 mm (up to 900 mm with optional outboard turning attachment!) - Centre distance: approx. 800 mm (extendable!) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Frequency inverter (2 belt speeds): - 60 – 1,350 rpm and 150 – 3,600 rpm - Tailstock quill travel: 150 mm (with scale) and trapezoidal thread spindle - Motor: 2 HP - Weight: approx. 290 kg The machine is located in A-5431 Kuchl and can be inspected during our opening hours at any time. Subject to prior sale! Freight dispatch: Austria: € 125.00 incl. VAT Germany: € 150.00 incl. VAT South Tyrol: € 180.00 incl. VAT Related terms: wood turning lathe, lathe, turning machine, wood lathe, turning, turning tools, woodturning, machine Reference: R-A0117 Tedpfxotpxx Ij Anped

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Stratos FU 230 LV (Long Version) woodturning lathe with a centre distance of approx. 1,000 mm (1 meter). This exhibition machine is in its original condition, so you benefit from the full warranty. Technical specifications: - Centre height: 230 mm - Swing over bed: 455 mm (up to 800 mm with the optional outboard turning attachment!) - Centre distance: approx. 955 mm on SPECIAL MODEL STRATOS FU-230 LV (further extendable with optional bed extension!) - Spindle thread: M33 x 3.5 (hardened), with ASR (Euro) anti-rotation safety groove* - Headstock and tailstock Morse taper: MK2 - Speed range (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (graduated scale and trapezoidal thread) - Motor: 1.5 kW / 2 HP (230 V connection) - Weight SPECIAL MODEL LV: 195 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight forwarding: Austria: €105.00 incl. VAT Germany: €125.00 incl. VAT South Tyrol: €150.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your enquiry professionally. Thank you, your NEUREITER Team Todpfxotpxw Aj Anped Related terms: woodturning lathe, lathe, turning lathe, woodturning machine, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Stanje: kot nova (razstavni stroj), SHOWROOM MACHINE For sale is an as-new Drechselmeister STRATOS XL woodturning lathe with a 3 HP motor! The showroom machine is in its original condition, so you receive the full warranty. Technical Specifications - Center height: 280 mm - Swing over bed: 550 mm (with optional bed extension/outboard turning attachment up to 1,000 mm) - Distance between centers: approx. 780 mm (extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock: Morse taper MK2 - Frequency converter (3 belt stages): - Stage 1: 60 – 1,200 rpm - Stage 2: 100 – 2,200 rpm - Stage 3: 150 – 3,700 rpm - Tailstock quill travel: 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick change system (for ER25 drill quill) - Motor: 3 HP - Weight: approx. 320 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping: Austria: €125.00 incl. VAT Germany: €150.00 incl. VAT South Tyrol: €180.00 incl. VAT Tedpfx Astpplnjnpsd If you are interested in this machine, please provide your full address details in the contact form so we can process your inquiry professionally. Thank you, your NEUREITER Team Related terms: woodturning lathe, lathe, bench lathe, turning bench, turning, turning tools, woodturning, machining, machine Reference: R-A0117

Stanje: kot nova (razstavni stroj), EXHIBITION MACHINE For sale is an almost new Drechselmeister Twister FU 200 woodturning lathe with a center distance of 715 mm. This exhibition machine is in its original condition and comes with the full warranty. Technical specifications - Center height: 200 mm - Swing over bed: 395 mm (up to 700 mm with optional outboard turning device) - Center distance: approx. 715 mm (optionally extendable) - Spindle mount: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed ranges (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill stroke: 100 mm (with trapezoidal thread), prepared for ER-25 drill adapter - Motor: 1.5 kW / 2 HP (230 V connection) Todpstpnawjfx Anpod - 2-stage brake switch - Weight (floor-standing version): 166 kg The machine is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight forwarder: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, turning lathe, woodturning lathe, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Stanje: kot nova (razstavni stroj), DISPLAY MACHINE For sale is an as-new Drechselmeister MIDI PRO benchtop wood lathe with a center distance of 450 mm. The display machine is in its original condition, therefore you receive the full warranty. Technical Data Todpfxotpn Tls Anped - Center height: approx. 178 mm (turning diameter 355 mm over the bed) - Center distance: approx. 450 mm (expandable!) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread: M33 x 3.5 (MT2 taper) with ASR (Euro) anti-release slot* - Tailstock with interchangeable barrel MT2, 100 mm - Motor: 0.7 kW / 1 HP (230 V) - Forward/reverse operation - Four-prong drive center and live center MT2 - Tool rest 250 mm (shank 25.4 mm) - Faceplate 95 mm - Machine weight assembled: approx. 67 kg - Weight of individual components (for easy transport, e.g., to markets): - Headstock 27 kg - Bed 26.4 kg - Tailstock 7.5 kg - Complete tool rest 6.2 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight: Austria: € 60.00 incl. VAT Germany: € 70.00 incl. VAT South Tyrol: € 95.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER team Related terms: woodturning lathe, metal lathe, lathe, wood lathe, woodturning, turning tools, woodturning, turning, machine Reference: R-A0117

Stanje: kot nova (razstavni stroj), DISPLAY MACHINE For sale is an as-new Drechselmeister MIDI 2 PLUS woodturning lathe with a maximum turning diameter of 355 mm. The display machine is in original condition and therefore comes with the full warranty. Technical Specifications - Centre height approx. 178 mm / turning diameter 355 mm - Centre distance approx. 400 mm (extendable with optionally available bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (Morse taper MK2) with ASR (Euro) anti-rotation safety groove* - Tailstock with interchangeable quill 100 mm MK2, trapezoidal thread and scale! - (Optional: Interchangeable quill with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Tjdjtpn Sropfx Anped Austria: €50.00 incl. VAT Germany: €60.00 incl. VAT South Tyrol: €80.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so we can process your enquiry professionally. Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, turning machine, woodturning lathe, woodturning tools, woodturning, turning, machine Reference: R-A0117

Stanje: kot nova (razstavni stroj), DISPLAY MACHINE For sale is a near-mint Drechselmeister STRATOS ECO wood lathe with a center distance of 680 mm. The display machine is in its original condition, so you receive the full warranty. Technical Specifications - Center height: approx. 230 mm - Turning diameter: approx. 455 mm (up to 800 mm with optional external turning device!) - Center distance: approx. 680 mm (extendable!) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MT2 - Speeds (2 belt stages): 60 – 1,350 RPM and 180 – 3,750 RPM - Quill travel: 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (230 V connection) - Weight: 177 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Related terms: wood lathe, lathe, turning bench, woodturning lathe, turning, turning tools, wood turning, lathe machine, machinery Tjdpfstpxt Rox Anpsd Reference: R-A0117

Stanje: skoraj kot novo (rabljeno), DEMONSTRATION MACHINE For sale: Demonstration unit MIDI2 Plus wood lathe with a center height of 178 mm, including machine base PRO DDMIDI-105! This lathe was only briefly used for demonstration purposes at Hödnerhof. Therefore, it can be described as like new and comes with full warranty / guarantee. Technical data: - Center height approx. 178 mm / Swing over bed 355 mm - Distance between centers approx. 400 mm (extendable with optional bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) safety groove* - Tailstock with interchangeable quill 100 mm MK2, trapezoidal thread, and measuring scale! (Optionally: Interchangeable quill with ER25 collet system for drilling) - Motor 1 hp (230 V) with high-quality frequency inverter - Weight approx. 53 kg Tsdpfx Aju Szlzsnped The machine is located in Kuchl, A-5431. Subject to prior sale! (No shipping possible) Related terms: woodturning machine, lathe, turning machine, wood lathe, woodturning, turning tools, woodturning, turning, machine Reference: DDMIDI2-PLUS-VH

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 112902, Naslov: Stružnica s CNC krmiljenjem Intorex CNI 1500 – letnik 2015 Opis: Doživite vrhunsko natančnost s stružnico Intorex CNI 1500 s CNC krmiljenjem, ki zagotavlja izredno zanesljivost, natančnost in učinkovitost – odlična izbira za vsako delavnico ali proizvodni obrat. Izdelana leta 2015, ta stroj je sinonim za kakovostno obdelavo. Ključne lastnosti: • Letnik izdelave: 2015 • Proizvajalec: Intorex • Model: CNI 1500 • Krmiljenje: CNC • Maks. premer struženja: 300 mm • Maks. dolžina struženja: 1500 mm • Vključuje risalni in programski paket IntorEDIT (enostaven za uporabo) Tsdpfxor Tiuko Anpsd Dodatna oprema: • Nastavljiv konjiček (12 & 18 mm) • Okrogla luneta (premer 90 mm in 140 mm) • 2 pnevmatska centrirnika za lažje natovarjanje obdelovancev Uporaba: Idealno za natančne stružne operacije v mizarstvu in lesnoobdelovalni industriji. Razlog za prodajo: Nadgradnja opreme. Vključuje premični zaboj za dodatke in orodje.

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Twister FU 180 woodturning lathe with a centre distance of 560 mm. The exhibition machine is in original condition, so you receive the full warranty. Technical Data - Centre height: 180 mm - Swing over bed: 358 mm (even higher with optional outboard turning device – depending on the workpiece!) - Centre distance: approx. 560 mm (extendable!) - Spindle thread: M33 x 3.5 with ASR (Euro) anti-release groove* - Spindle and tailstock taper: MK2 - Speed range (2 belt stages): 50 – 1,230 rpm and 150 – 3,700 rpm - Quill travel: 100 mm (with scale), with trapezoidal leadscrew - Motor: 1.1 kW / 1.5 HP (230 V) - Overall length: 1,345 mm - Weight, stand version: 144 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight carrier: Tedpfx Astphy Aonpod Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your full address details in the contact form so we can process your enquiry professionally. Thank you, your NEUREITER Team Related keywords: woodturning lathe, lathe, turning machine, woodturning, turning, woodturning tools, lathes, machine Reference: R-A0117

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE We are selling our as-new Drechselmeister MIDI 1 woodturning lathe with a centre distance of 400 mm. The ex-demonstration machine is in its original condition, therefore you receive the full warranty. Technical Data - Centre height approx. 178 mm / Swing over bed 355 mm - Centre distance approx. 400 mm (extendable with optional bed extensions) - 3 belt stages / Infinitely variable speeds: 80 – 800 / 170 – 1,700 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (Morse taper MK2) with ASR (Euro) safety groove* - Tailstock with MK2 quill (50 mm travel with graduated scale!) - Motor 0.7 kW / 1 hp (230 V) with frequency inverter Tsdpotpn Nlsfx Anpod - Weight approx. 43 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping rates: Austria: €50.00 incl. VAT Germany: €60.00 incl. VAT South Tyrol: €80.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your enquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, wood lathe, turning lathe, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE For sale is an as-new HAGER HDE-59 BIG woodturning lathe with a centre distance of 1,000 mm. The exhibition machine is in original condition and therefore comes with the full warranty. Technical data - Motor: 2.2 kW / 3 HP / 400 V - Speed ranges: 100–450 rpm 300–1,100 rpm 750–2,700 rpm - Centre height: 250 mm - Centre distance: 1,000 mm - Tool rest: 350 mm - Rotation direction switch - Spindle M33 x 3.5 mm with ASR (Euro) safety groove - Spindle and tailstock taper: MK3 - Hollow spindle diameter: 20 mm - Main spindle: 4-fold bearing - Tailstock quill travel: 150 mm (with scale) - Total length: 1,780 mm - Weight: 235 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Tedpfstpnddex Anpod If you are interested in this machine, please provide your full address in the contact form so that we can process your enquiry professionally. Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, turning lathe, woodturning lathe, woodturning, turning tool, wood turning, lathes, machine, Hager Reference: R-A0117

Stanje: kot nova (razstavni stroj), DISPLAY MACHINE For sale is an as-new TEKNATOOL Nova Nebula 230 DVR wood lathe with a direct drive ranging from 50 to 4,000 rpm. The display machine is in its original condition, so you receive the full warranty. Technical Data - Center height approx. 230 mm - Distance between centers max. 680 mm - Spindle thread M33 x 3.5 with ASR (Euro) anti-drop groove - Spindle and tailstock taper: MK2 - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-position indexing - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with scale and trapezoidal thread) - Weight: 204 kg Tjdpotpph Sofx Anpsd - Shipping weight approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: €105.00 incl. VAT Germany: €125.00 incl. VAT South Tyrol: €150.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: wood lathe, lathe, turning machine, woodturning lathe, turning, turning tools, wood turning, machine Reference: R-A0117

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Tračna žaga Elektra Beckum BAS 450 DB Leto izdelave: 1989 Višina reza: 300 mm Dolžina tračnega lista: 3.380 mm Moč motorja: 1,5 kW Teža cca: 120 kg Todpfx Anjyy U Txepod Lokacija: na zalogi 54634 Bitburg - takoj na voljo - Predhodna prodaja pridržana.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Največji premer obdelovanca: 285 mm, Največja dolžina obdelovanca: 280 mm, Prehod skozi vreteno: 38 mm, Hod osi X: 480 mm, Tjdpswb A Hcsfx Anpjd Hod osi Z: 285 mm, Hitrost vretena: 6.000 min⁻¹, Moč: 5,5 kW, Transportni trak za odrezke.

Leto izdelave: 2026, obratovalne ure: 1.130 h, stanje: skoraj kot novo (rabljeno), premer struženja: 400 mm, prehod palice: 65 mm, nos vretena: HSK-T 63, stružna dolžina: 1.100 mm, CNC stružnica in frezalni center Proizvajalec: DMG MORI Tip: CLX 450 TC s sistemom Robo2Go Letnik: 2026 Nadzor: Celos X s sistemom Siemens Sinumerik One Tsdpfe Agr Ivjx Anped Tehnični podatki: Maks. premer obdelovanca pri struženju: 400 mm Dolžina struženja: 1100 mm Premer vretena: maks. 65 mm Hodi: x-hod: 276 mm z1-hod: 755 mm z3-hod: 775 mm y-hod: +/- 100 mm b-hod: +/- 120 ° Glavna vretena: Število vrtljajev: 5.000 vrt/min Moč pogona: 14/17 kW Maks. navor: 275/345 Nm Protivretena: Število vrtljajev: 5.000 vrt/min Moč pogona: 14/17 kW Maks. navor: 275/345 Nm Frezalna vretena: Število vrtljajev: 0 – 12.000 vrt/min Moč pogona: 8,8/10,5 kW Nosilec orodja: HSK-T 63 Menjalnik orodja: 60 položajev Maks. navor: 73/90 Nm Notranja vpenjalna naprava: Ø 67 mm Delovne ure: približno 1.130 ur Ure delovanja vretena: približno 280 ur Tehnične lastnosti in dodatna oprema: - Absolutni, neposredni sistemi za merjenje hoda v osi x in y - Dvojni filter - Protivretena ISM 65, A2-8, os c in hidravlična zavora vretena - Tračni transporter za odvoz strune, vključno s rezervoarjem za hladilno tekočino - Sistem za izpiranje vpenjalne glave zunaj, za glavno in protivreteno - Dovod hladilne tekočine skozi protivreteno - Pralna pištola za hladilno tekočino - Čiščenje stekla varnostnega zaščitnega stekla - Elektronsko ročno kolo (če je na voljo) - Izmenično število vrtljajev - Signalna luč, 4-barvna - Avtomatska vrata delovnega prostora, električna - Električni vmesnik Robo2Go - Tipalo za merjenje obdelovanca, proizvajalec Renishaw RMP40 (če je na voljo) - Naprava za merjenje orodja, proizvajalec Renishaw RP1 (če je na voljo) - Funkcija zaznavanja zloma svedra za Renishaw RP1 - Sistem za merjenje hoda za os z1 - Diferenčni tlak 2,0 na glavni in protivreteni - Funkcija podpirala za protivreteno, vključno s pedalnim stikalom - Sistem za hlajenje 8 / 40 bar, sestavljen iz: - Rezervoar za hladilno tekočino 600 l - Variabilni pritisk črpalke 8 – 40 bar - Sistem filtracije s trakom - Črpalka za dvigovanje z nadzorom nivoja - Mehanski separator za oljne pare - Paket za zaščito - Tehnološki cikel z interaktivno programiranjem - Tehnološki cikel za odrezovanje obdelovanca - 2x tričeljustna vpenjalna glava, proizvajalec Schunk ROTA THW3 265-81 - Sistem za nalaganje in razkladanje Robo2Go, sestavljen iz: - Modul 35 kg - Predalnik, vključno z dodatnim predalom - Dodatna oprema na zahtevo Dodatna oprema, prikazana orodja in vpenjalna orodja so vključena v obseg dobave samo, če je to navedeno v dodatnih informacijah. Če ni drugače dogovorjeno, velja za prodajo strankam B&B, da je brez garancije.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1994, obratovalne ure: 8.000 h, Funkcionalnost: nepreverjeno, Machine in good condition Tedpfsv Im Sdsx Anpsd

Stanje: zelo dobro (rabljeno), Model: 4M/65E Stanje: Zelo dobro Dimenzije: 80,00 (V) x 60,00 (Š) x 120,00 (D) palcev Dodatni opis: - Avtomatski kopirni stružnica Tedoxz Tfaspfx Anpod - Za izdelavo lopat, motik, držal, opor za puške, sekir, nog, kriket palic ipd. - Obdeluje 4 kose hkrati. - Rezkar (brez priključka za brušenje) - Regulacija hitrosti na vozičku. - Deluje odlično

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 14.022 h, številka stroja/vozila: 2621150, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: VARIOBEND / ASCO, model krmilnika: VARIOBEND Touch Control, delovna širina: 6.400 mm, najv. debelina pločevine: 1 mm, najv. debelina jeklene pločevine: 1 mm, maks. debelina pločevine iz nerjavečega jekla: 1 mm, maks. debelina aluminijaste pločevine: 2 mm, nastavitev zadnjega prislona: CNC krmiljen, zadnji prislon: 1.300 mm, skupna masa: 8.800 kg, skupna dolžina: 7.200 mm, skupna širina: 2.150 mm, skupna višina: 1.600 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, leto zadnje generalne obnove: 2025, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, kotni ventil, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, Ponujamo v prodajo strojno opremo VARIOBEND, CNC stroj za upogibanje pločevin, proizvedeno podjetje ASCO GmbH, Nemčija. Stroj je trenutno v lasti podjetja DIMING d.o.o., ki ima sedež v Sloveniji in je specializirano za gradbena in pločevinarska dela. Stroj je zasnovan za natančno in učinkovito upogibanje pločevin in je še posebej primeren za izdelavo strešnih konstrukcij, fasad in arhitekturnih elementov iz pločevine. Njegova robustna konstrukcija in CNC-nadzorovana uporaba zagotavljajo natančne, dosledne in ponovljive rezultate upogibanja, zaradi česar je primeren za profesionalno obdelavo pločevine. Todpfx Aez Sz Txonpod Nadgrajujemo našo strojno opremo in investiramo v novejšo generacijo strojev za upogibanje. Stroj je na voljo za pregled v Sloveniji po predhodnem dogovoru.

Stanje: dober (rabljeno), Lathe Length: 1750 mm Motor power: 3 kW Tjdpfx Aji Akv Ssnpod Voltage: 380 Volt Location: available from stock in 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, premer struženja nad prečnim suportom: 250 mm, stružna dolžina: 730 mm, premer struženja: 500 mm, največja hitrost vretena: 1.800 obr/min, CNC stružnica CK 6150 s plosko posteljo Ponujamo novo CNC stružnico, model CK6150. Ta stroj uporabljamo tudi v lastni proizvodnji, zato si ga lahko pred naročilom ogledate v delovanju. Stružnica CK 6150 ima plosko posteljo in kaljene vodila, kar zagotavlja dolgo življenjsko dobo stroja. Stroj je standardno opremljen s CNC krmilnim sistemom GSK. Po želji lahko namestimo tudi Fanuc ali Siemens CNC sistem. Glede na zahteve kupca je možno montirati revolversko glavo za 4, 6 ali 8 orodij. Stroj je možno opremiti s hidravličnim vpenjalom, kar bistveno poenostavi nameščanje obdelovancev, ter z hidravličnim konjičkom. CK 6150 je lahko dodatno opremljen z nosilnim ogrodjem za natančnejšo obdelavo dolgih kosov. Tehnične specifikacije: Model: CK 6150 x 1000 Največji premer obdelovanca nad posteljo: 500 mm Največji premer obdelovanca nad suportom: 250 mm Največja dolžina obdelovanca: 1000 mm Največja dolžina struženja: 730 mm Premer vretena: 82 mm Hitrost vretena: 150–1800 min⁻¹ Moč glavnega motorja: 7,5 kW Mehanska glava (hidravlična opcijsko) Premer vpenjala: 250 mm Tjdpfx Anoxdmgvjpjd 4-pozicijska orodna glava (6 ali 8 pozicij opcijsko) Največja velikost orodja: 25x25 mm Teža stroja: 2700 kg Dimenzije stroja: 2650 × 1700 × 1820 mm Dobavimo lahko tudi druge modele stružnic serije CK: CK 6140 – delovna dolžina: 550/750 mm CK 6150 – delovna dolžina: 1000/1500/2000 mm CK 6160 – delovna dolžina: 1000/1500/2000 mm CK 6152E – delovna dolžina: 1000/1500/2000/3000 mm CK 6165E – delovna dolžina: 1000/1500/2000/3000 mm CK 6185E – delovna dolžina: 1000/1500/2000/3000/4000 mm CK 61100E – delovna dolžina: 1000/1500/2000/3000 mm CK 61125E – delovna dolžina: 1000/1500/2000/3000 mm