Stroj za struženje lesa / stružnica

MIDI 1

Stanje: rabljeno, Leto izdelave: 1981, Razdalja med konicama: 1300 mm Dolžina kopiranja: 1250 mm Višina stroja do konice: 250 mm Višina konice nad suportom: 160 mm Podajalna hitrost sani: 3 m/min Teža: 630 kg Hitrosti vrtenja: 500-1000-1500-3000-2100-4200 min⁻¹ Hidravličen Lokacija skladišča: Nattheim Fpjdpfx Afjvvkt Ijlsb

Leto izdelave: 2022, Stanje: novo, Thickness Planer KD410 Weight: 205 kg Voltage: 400 V – 3 phase, Power (S6) 4.4 kW / 6.6 HP Chip and dust extraction diameter: 100 mm Planer table dimensions: 600 x 410 mm Maximum planing height: 230 mm Cutterblock diameter: 70 mm Number of knives: 3 Maximum thickness per pass: 4 mm Speed: 5500 rpm Feed speed: 6 m/min Accessories: - Handwheel with readout for thickness adjustment - Tersa cutterhead Fpsdpegx T Hhofx Afleb Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, širina na sredini: 390 mm, višina središča: 310 mm, skupna masa: 61 kg, vhodna napetost: 230 V, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 3.500 obr/min, nosilec vretena: MK 2, moč: 0,75 kW (1,02 KM), • Solid cast construction of the headstock, tailstock, and support ensures smooth operation. • User-friendly operation of the cast tool rest. • Induction motor delivers high torque even at low speeds. • Digital speed display. • Edge of the tool rest made from hardened steel. • 24-position indexing for locking the workpiece. • Storage compartment keeps your centers always within reach. • Ejection pin and key for securing the faceplate. • Pre-drilled holes for headstock lighting. • Simple assembly of accessories: stand, extension, lighting, and mobile base. • Machine bed width is 160 mm! The mid-size LAGUNA 1216 wood lathe is distinguished by its robust components: cast-iron headstock, tailstock, precisely ground bed, and tool rest with a hardened steel edge for increased durability. Another highlight: ergonomic control panel made of anodized aluminum with a Duralumin speed control knob. Working speeds: 50–525, 325–1750, 650–3500 rpm. Infinitely variable speed control via the Duralumin dial, and switching between three gearing ranges using a simple lever mechanism. The advanced motor technology ensures high torque, even at low speeds. Tailstock locking at the rear: unobtrusive during operation but always within easy reach. Ergonomic handles with eccentric locking for secure holding. • Model: REVO 1216 • Recommended use: Professional production • Power (230 V): 750 W • Speed: 50–525, 325–1750, 650–3500 rpm • Max. working diameter over bed: 310 mm • Distance between centers: 390 mm • Spindle thread: M33 × 3.5 mm • Headstock / tailstock taper: MT2 / MT2 • Tool rest / tailstock bore: 17 / 17 mm • Quill travel: 63 mm • Tool rest post diameter: 25.4 mm (1") • Dimensions (L × W × H): 750 × 226 × 442 mm • Weight: 56.3 kg • Dimensions including packaging: 750 × 226 × 442 mm • Shipping weight: 61 kg Fedpfxetuuv No Aflepb • Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: • Drive center • Live center • Faceplate • Tool rest • Ejection pin with brass tip • Spindle locking key

Stanje: novo, The Servoturn 500/1000 is a state-of-the-art universal lathe classified among conventional lathes and a member of the servo lathe product group. This machine combines advanced feed technology with proven mechanical engineering, making the transition to servo-conventional lathes both more attractive and economical. Equipped with powerful servo motors and high-quality ball screw drives, the Servoturn allows for precise control of all axes via electronic handwheels and infinitely variable feeds. It also features an intuitively operated interface, where feed rates and thread pitches can be conveniently selected using rotary switches. The robust drive system ensures consistently high surface finish and precision, comparable to CNC lathes. With a swing over bed of 500 mm and a centre distance of 950 mm, the Servoturn 500/1000 is ideal for demanding turning tasks. It is equipped as standard with a quick-change toolpost and a central lubrication system for low-maintenance operation. Purchase the Servoturn 500/1000 now and experience the precision and robustness that KNUTH offers. Fedpfx Asl Iy Sieflopb

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available - Fodpfx Aoi Dfidoflspb

Stanje: novo, Leto izdelave: 2025, Universal Lathe CORMAK 310 x 900 (TU3109V), VARIO version with stepless spindle speed control. Machining parameters 310 x 900 mm, modern DC motor 1.5kW/230V, equipped with cooling system and digital readout. Recommended for machining hard steels, internal and external surface turning, taper turning, polishing, threading (metric and imperial), drilling, and broaching. Semi-professional model, designed for single-piece and small batch production. Machine version with base. The CORMAK 310 x 900 (TU3109V) 230V universal lathe, thanks to stepless spindle speed adjustment, is an ergonomic machine that meets user requirements. Reduced setup time when working on a wide range of part sizes translates into increased productivity and ease of operation. VARIO version – electronic, stepless spindle speed adjustment via direct current motor and voltage regulator, providing the highest spindle rotational accuracy and improved machining quality of finished parts. Modern DC motor with stepless spindle speed regulation ensures user convenience and shorter setup times. Smooth, efficient drive with excellent speed and torque control characteristics. LCD screen with spindle speed display allows easy monitoring and quick adjustment of spindle speed while setting cutting and threading modes. Two spindle speed ranges: low (80–1000 rpm) for machining hard steels, high (160–2000 rpm) for precision high-speed turning. Easy adjustment of spindle speed and automatic feed from the ergonomic control panel on the gearbox. Bed with induction-hardened, ground guideways. The suitable bed width of 180 mm ensures stable and precise operation. Wide threading range (right- and left-hand threading): metric – (18) 0.2–3.5 mm, imperial – (18) 8–48 TPI. Automatic longitudinal feed 0.085–1.832 (9) mm/rev and cross feed 0.010–0.100 (9) mm/rev – reduces machining time and improves quality when turning long workpieces. Spindle bore 38 mm provides optimal working results, allowing the machining of large-diameter shafts. Fjdsric Idopfx Afljpb Compound slide with graduation, swivel ±45°, and tailstock with ±10 mm offset for taper turning. Hardened and ground gears in the spindle gearbox. Leadscrew and feed rod for threading and automatic longitudinal and cross feed. Cooling system and 2-axis digital readout included as standard. Machine is fully compliant with EU directives (CE) as well as Polish and DIN regulations and standards.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, hitrost vretena (min.): 18.000 obr/min, največja hitrost vretena: 2.800 obr/min, montažni premer: 300 mm, dolžina pomika po osi Y: 1.800 mm, CNC lathe with two stations – Efficiency, precision, and productivity in cylindrical workpiece machining The CNC lathe with 2 working units and numerical control is a modern solution for machining cylindrical wooden components—such as columns, table legs, or decorative elements—providing accuracy, repeatability, and efficiency in any workshop or manufacturing environment. Double performance with independent units Fpjdpfewhbguox Afljb Equipped with two working units that can operate simultaneously or independently, the lathe enables rapid machining of workpieces up to 1200 mm in length. It is ideal for serial production of furniture components, ecclesiastical elements, or artistic objects. Robust construction for durability The welded bed from rectangular profiles, thermally treated, provides stability and resistance to torsion. Linear guides on the X, Y, and Z axes ensure precise, vibration-free movement. Precision through numerical control Hybrid servomotors, together with the rack-and-pinion system, guarantee exact positioning and efficient control on all axes. The manually adjustable tailstock with four fixing points stabilizes workpieces during complex operations. Advanced motors and cooling Water-cooled motors allow operation at speeds up to 18,000 rpm without overheating, ensuring constant workflow and extended service life. Smart DSP control The DSP control unit with internal memory enables fast file import, project resume from the stopping point, and real-time parameter adjustment—ideal for a continuous and efficient production flow. Auxiliary precision and maintenance systems Self-centering chucks hold workpieces securely, while optical sensors and automatic lubrication systems ensure precision and low maintenance. Key advantages - Perfect repeatability, even for high-volume production - Operational flexibility with independent working units - Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality, and adaptability in wood machining, making it the ideal choice for modern workshops or furniture factories aiming to optimize their production processes. Maximum working length: 1200 mm Maximum working diameter (Ø): 300 mm Number of working units: 2 Control: DSP Workpiece rotational speed: 0–2800 rpm Motor power: 4.5 kW Spindle speed: 18,000 rpm Inverter: “BEST” inverter Drive motors: Hybrid servomotors Maximum feed rate: 50 mm/s Accuracy: 0.0125 mm

Stanje: novo, Technical data: Minimum cutting width: 300 mm Maximum cutting width: 400 mm Maximum cutting height with standard blade guide: 350 mm Fjdpomiiktofx Aflopb Maximum cutting height with special blade guide: 410 mm Blade length: 2720 mm Motor power: 1.1 kW Advantages: - Safe and easy to use machines, manually operated by the user. - Designed and built for cutting materials such as solid wood, panels, plywood boards, including those laminated or with edge banding. - Suitable for small-scale work as well as serial production. - The main advantage distinguishing MD Dario band saws from conventional models is the articulated arm with a special joint system, allowing free rotation of the machine in all directions and angles, enabling the user to perform precise cuts. - The saws feature three flywheels covered with rubber, which ensure perfect blade guidance and allow the use of band saw blades of various sizes, depending on the type of cut. The set includes a worktable and tilt adjustment.

Stanje: rabljeno, Felder Format 4 Kappa 450 panel saw Heavy-duty precision sliding table saw Scoring unit Motor power: 5.5 kW Saw blade tiltable 90 - 46° Electric angle and height adjustment Saw blade diameter up to 450 mm Fpjdpfxex H Nkle Afleb Cutting length: 3200 mm Rip capacity with parallel fence: 1200 mm Year of manufacture: 2005 CE-certified version Machine from a joinery closure/retirement – in VERY GOOD CONDITION Available directly from the joinery

Stanje: dober (rabljeno), Tailstock Quill size: MT 2 Fjdpfxedlp Txs Afljpb Quill stroke: 30 mm Height adjustable Centre height: 250 – 285 mm Adjustable tilt: -5° to +15° Base dimensions: 230 x 155 mm Weight: 27 kg