Stromab Tr 450 nakup rabljenega (60)

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 900 kg Total power requirement: 5 kW Fully optimizing automatic crosscut saw TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle: 4 seconds - Pneumatic crosscutting unit - Inclined worktable at 8° - Minimum workpiece thickness: 10 mm - Safety cover over crosscutting unit - CE compliant - Weight: 900 kg Electrical connection: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air velocity at extraction port center: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and mass measuring via servo motor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - Three optimization options (maximum length, sequence, part sequence) - Three optimization options (volume, minimal waste, priority) - USB and Ethernet ports as standard - Includes OPTI function for automatic measurement of the workpiece to be cut. Ideal solution for processing material with varying lengths, with single or bundle feeding. Six optimization options (maximum length, sequence, part sequence, volume, minimal waste, priority). Cedpfx Aov A Hr Tjfxspu - Includes OPTI PLUS function for detection of markings, ensuring full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creating cutting lists via PC: €360.00 - Outfeed table: €360.00/m

Stanje: dober (rabljeno), Leto izdelave: 2003, premer žaginega lista: 450 mm, Nice under-table mitre saw with two-hand operation and foot switch Cedpfxjwx R Ivj Afxspu Saw blade diameter: 450 mm Max. cutting height: 16 cm With 2 roller conveyors

Stanje: novo, Leto izdelave: 2024, Système automatique de mesure de longueur et de positionnement pour toutes les scies à tronçonner STROMAB ainsi que pour toutes les machines similaires d’autres fabricants. Il sert à la fois de butée et au positionnement des pièces. Composé de: Profilé en aluminium 105 x 90 mm, anodisé Entraînement par courroie crantée 32 mm, renforcée avec fil d’acier Cedpfxjxrauce Afxspu Moteur pas à pas 6 Nm, multi-tension 115-230 V – 50/60 Hz Précision de répétition +/- 0,1 mm Vitesse de positionnement 60 m/min. Commande Type SMART 7 avec écran tactile 7 pouces Mode d’usinage absolu et incrémental 8 valeurs standards préréglées 2 versions logicielles avec différents niveaux d’optimisation optionnellement disponibles. ZM 415 – Longueur de travail utile 4.500 mm ZA333 – Table à rouleaux 4.500 x 280 mm, diamètre rouleaux 32 mm ZA341 – Support frontal 4.500 x 260 mm ZA373 – Câble de verrouillage pour scie à tronçonner existante

Stanje: pripravljen za uporabo (rabljen), Tehnične karakteristike premer rezila Ø 450 mm, 4 kW Zmogljivost 25 x 330 mm, 50 x 300 mm, 100 x 250 mm Uporabna dolžina reza 6000 mm, 90 m/min Dvižna ograja z detekcijsko enoto MATRIX 3 PLUS Krmiljenje POWER 1000 Cpsdsraduaepfx Afxsu Upravljanje podatkov in USB vmesnik za uvoz seznamov rezov Iztočna miza 3 m Rezanje lesenih ploščic, embalaže, palet, špirovcev, žaganega lesa Moč in motorji Skupne dimenzije

Stanje: pripravljen za uporabo (rabljen), Technische Eigenschaften Max. Sägeblatt-Ø: 450 mm, Bohrung: 30 mm Motorleistung: 4 kW Drehzahl: 2800 U/Min Schnittkapazität (Höhe x Breite Holz): 25 x 330 mm, 50 x 300 mm, 100 x 250 mm Einlauftisch: Auslauftisch: Tigerstop-Längenanschlag im Lieferumfang 2 Absaugstutzen Ø 100 mm Ideal zum Zuschneiden von: Holzfliesen, Verpackungen, Paletten, Sparren, Schnittholz Stromversorgung und Motoren Spannung: 380 V Anschluss: Drehstrom Leistung: 5,5 kW Motor: 7,5 PS Abmessungen gesamte Länge: 2100 mm Breite: 1010 mm Höhe: 1210 mm Cpjdpfx Aferadt Djxou Gewicht: 310 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 724, premer žaginega lista: 600 mm, višina mize: 850 mm, natančnost pozicioniranja: 0,4 mm, največja hitrost vrtenja: 3.000 obr/min, delovna dolžina: 8.000 mm, TECHNICAL DETAILS Saw Blade Diameter: 600 mm Motor Power: 12.5 HP Saw Blade Speed: 3,000 rpm Working Table Height: 850 mm Extraction Nozzles: 3 units, diameter: 100 mm Maximum Working Length: 8,000 mm Positioning Accuracy: +/- 0.4 mm Cutting Capacities Width 610 mm, Height: 30 mm Width 580 mm, Height: 60 mm Width 530 mm, Height: 100 mm Width 490 mm, Height: 120 mm Width 450 mm, Height: 140 mm Width 380 mm, Height: 160 mm MACHINE DETAILS Saw Unit Drive: hydraulic Discharge Area: 4,000 x 600 mm Compressed Air Requirement: 7 bar Cpsdpfsyf Evyjx Afxju Dimensions & Weight Total Dimensions of Assembled Machine (L x W x H): 13,000 x 2,000 x 1,600 mm Transport Dimensions (L x W x H): Machine 1,200 x 1,700 x 1,600 mm Transport Dimensions (L x W x H): MATRIX Pusher 8,800 x 1,500 x 1,500 mm Weight: 1,600 kg EQUIPMENT Infeed system with precision rack and pinion and brushless motor Position measurement via magnetic tape Pneumatic lifting of the pusher with workpiece measuring probe Cutting cycle control via keyboard or remote PC Operator software with 99 programmable cutting cycles Operator software with 1 cutting cycle for 100 programmable dimensions Protective enclosure for the cutting area Two-hand operation safety feature Flat discharge table

Stanje: rabljeno, Leto izdelave: 2005, skupna višina: 1.750 mm, skupna dolžina: 1.350 mm, skupna širina: 1.350 mm, Optimirna čelilna žaga Stromab TR 500 Matrix 4 4000 Letnik proizvodnje: 2005 Moč motorja: 10 KM Auto-Push-Up sistem Inkjet tiskalnik - Leto izdelave: 2005 - Dokumentacija na voljo: Ne - CE certifikat: Ne - Serijska številka: 250143 - Moč glavnega motorja [kW]: 7.5 - Največja širina reza [mm]: 375 - Premer gredi žaginega lista [mm]: 30 - Dolžina dovajalne mize [mm]: 4300 - Dolžina izhodne mize [mm]: 2000 - Transportne mere: 1350mm x 1350mm x 1750mm (d x š x v) - Število transportnih paketov [kos]: 3 Finančne informacije DDV: Navedena cena je brez DDV DDV/Obdavčitev po diferenčni shemi: DDV odbiten za podjetja Csdpowq U Dxefx Afxepu Dostava in odkup možna kadarkoli za vso industrijsko opremo.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Total power requirement 10.2 kW Fully-automated optimizing cross-cut saw with full optimization TR-600 MATRIX-6000 - Motor drive power 9.2 kW - Saw blade diameter 600 x 30 mm Z=60 - Cutting capacity according to cutting diagram - Cutting capacity 150 x 365 mm - Cutting capacity 130 x 440 mm - Cutting capacity 100 x 530 mm - Cutting capacity 60 x 580 mm - Cutting capacity 30 x 610 mm - Cutting cycle 6 seconds - Hydraulic cross-cut unit - Work table inclined by 8° - Minimum workpiece thickness 10 mm - Safety cover over cross-cutting unit - CE standard - Weight 1500 kg Electrical specifications: - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Extraction ports 4 x diameter 100 mm - Extraction capacity 2400 m³/h - Air speed at center of extraction port approx. 25–35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Max. pusher speed 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, length measurement via servomotor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination 8° - Positioning tolerance +/- 0.4 mm Control system: Cjdpjv A Htkofx Afxopu - High-resolution 12" touchscreen monitor (800 x 600 px) - Create cutting lists directly on the machine control - Up to 1,000 cutting lists with 10 dimensions each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard with USB and Ethernet interface - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing variable-length material, for single or bundle feeding. - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creating cutting lists on PC €360.00 - Outfeed table €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully Automatic Optimizing Cross-Cut Saw with Full Optimization TR-500 MATRIX-6000 - Main motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm Cjdpev A Htdjfx Afxjpu - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 s - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE compliant - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction outlets: 4 x Ø 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air velocity at the nozzle center: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and servomotor-based measurement - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell workpiece length measurement - Photocell defect detection - Fluorescent chalk marking - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12” touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization modes (maximum length, sequence, and workpiece sequence) - 3 optimization modes (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing variable length material with single or bundle feeding - 6 optimization modes (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for detecting markings, thereby enabling full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 160 mm, največja širina rezanja: 600 mm, skupna masa: 550 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, premer žaginega lista: 600 mm, premer odprtine diska: 30 mm, premer diska: 600 mm, Prečna žaga - HIDRAVLIČNA STROMAB TR 600 Motor 7,5 kW, 380 V, 16,5 A Cpodpfsxz S Dnsx Afxou Teža: 550 kg V dobrem delovnem stanju, pripravljena za proizvodnjo

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 610 mm, premer žaginega lista: 600 mm, vrsta vhodnega toka: trifazni, - leto izdelave 1997 - dve pnevmatski zapahi TEHNIČNI PARAMETRI: - premer žaginega lista: 600 mm - maks. širina reza: 610 mm (pri višini elementa 30 mm) - maks. višina reza: 160 mm (pri širini elementa 380 mm) - moč motorja: 7,5 kW - izhod za odvod žagovine: 2 x 100 mm - dve pnevmatski zapahi za rezanje na določeno dolžino - hidravlično vpenjanje elementa in pomik žaginega lista - brezstopenjska regulacija hitrosti rezanja - dovajalna miza: 1000 mm / 470 mm D-90 mm Cpjdpfx Ajx Ekmrjfxsu - odjemalna miza: 1500 mm / 500 mm D-60 mm - premer vretena: 30 mm - hitrost vrtenja lista: 2800 obr/min Transportne dimenzije - 280x165x140 cm - teža 600 kg

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 1377, STROMAB TR 500 PNEUMATIC CROSSCUT SAW – CE STANDARD – USED - Equipped with TIGERSTOP electronic positioning stop, 4000mm - Infeed roller table, 4500mm - Outfeed roller table, 4500mm - Blade diameter: 500 mm - Maximum cutting capacity: 360 mm (width) x 60 mm (height), 135 mm (height) x 280 mm (width) - Motor: 10 hp - 415 volt - Serial no.: 1377 Cpjdpfet U Izpex Afxou - Year: 2007

Stanje: rabljeno, Leto izdelave: 2016, skupna višina: 1.600 mm, skupna dolžina: 14.100 mm, skupna širina: 1.600 mm, Teža: 2.500 kg - Leto izdelave: 2016 Cjdownh N Nepfx Afxjpu - Dokumentacija na voljo: Da - CE označba prisotna: Da - CE certifikat na voljo: Ne - Serijska številka: 6237 - Napetost [V]: 415 - Poraba toka [A]: 20 - Transportne mere: 14100mm x 1600mm x 1600mm (D x Š x V) - Transportna teža [kg]: 2500kg - Transportni paketi [kos]: 4 Finančne informacije DDV: Prikazana cena ne vključuje DDV DDV/obdavčitev razlike: DDV je odbitno za podjetja Dostava in odkup so možni kadarkoli za vse iz industrijskega področja Yorick Diebels

Stanje: rabljeno, STROMAB TR 500 – Under-table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideally suited for precise and efficient cutting of workpieces in workshop environments. Year of manufacture: 2009 Codpfsxiza Ujx Afxopu Machine number: 3229 — Technical Specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & Delivery The machine is in excellent technical condition and ready for immediate use. • Inspection possible at any time • Secure palletised shipping by freight carrier available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to changes and errors.

Stanje: pripravljen za uporabo (rabljen), Tehnične značilnosti Hidravlični podajalnik rezila Premer rezila: 600 mm Motor: 12 kW, 3000 vrt/min Dvoročno upravljanje Uporabne zmogljivosti: Širina 610 x višina 30 mm do Širina 420 x višina 160 mm Zaščitna mreža pritiskača Cpjdpet E Efgsfx Afxsu MATRIX 2 Uporabna dolžina: 6000 mm Optimizacija dolžine, avtomatski cikli 99 programabilnih rezalnih ciklov 15 programabilnih meritev na cikel 3 sesalne šobe Ø 100 mm Električna moč in motorji Napetost: 400 V Priklop: trifazni Motor: 16 KM Skupne mere

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, Žaga je še vedno v uporabi, po dogovoru jo je mogoče kadar koli preizkusiti. Podatki na tipski tablici. Csdpfx Ajyaangefxjpu

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, AVTOMATSKA KROJILNICA ZA DESKE STROMAB MOD. TR600 – V SKLADU S CE NORMAMI - Vhodni valji 2 metra - Izhodni valji 2 metra - Št. 3 omejevalniki dolžine 250 mm - CE norme - Leto 2004 Cedox Rrp Sopfx Afxepu - Z navodili za uporabo in vzdrževanje + CE certifikat

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, Prečna žaga STROMAB TR600 Specifikacija: • stanje – rabljeno, po servisu • proizvajalec – STROMAB • model – TR600 • skupna moč – 9,2 kW • premer lista – 600 mm • premer osi motorja – 30 mm • vrtljaji motorja – 3.000 min⁻¹ • hidravlični pritisk in pomik lista • regulacija hitrosti reza • maks. širina reza – 610 mm (pri višini 30 mm) • maks. višina reza – 160 mm (do širine 380 mm) • dodatna miza – 1 x 2,0 m • masa ohišja – 570 kg • leto izdelave – 2001 • odsesovalni priključek – 3 x 100 mm • stroj izpolnjuje CE standarde, ima zaščite, varnostne gumbe in dokumentacijo v italijanščini • mere ohišja – 130 x 145 x 135 cm (d x š x v) Csdex Ezmcspfx Afxepu Dodatne informacije: • zelo dobro, originalno tehnično in vizualno stanje • priložene slike prikazujejo dejansko stanje predmeta prodaje • možnost zagona in preverjanja stroja na mestu

Stanje: novo, Leto izdelave: 2023, največja višina reza: 200 mm, skupna masa: 700 kg, največja širina rezanja: 660 mm, premer diska: 600 mm,

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, I am selling a Stromab TR350 pneumatic crosscut saw, year of manufacture 2016. Motor power: 4.0 kW Saw blade diameter: 350 x 30 mm Cpsderzu Ugjpfx Afxsu Cutting capacity version 1: max. 210 x 30 mm Cutting capacity version 2: max. 150 x 80 mm Infeed table: 1.00 m (extendable) Outfeed table: 1.00 m (extendable) Aluminium profile for stop system: total length 2.00 m Available immediately. Condition: as new. Weight: 150 kg.

Stanje: dober (rabljeno), Leto izdelave: 1999, Maximum working area 3000 x 1600mm Minimum working area 390 x 420mm Motor power 2.2kW Cjdeg Np Raspfx Afxopu Weight 1500kg

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Cjdpehw Ng Iofx Afxepu Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Stanje: pripravljen za uporabo (rabljen), Tehnične značilnosti Csdpfx Aor A Ulksfxspu Moč in motorji Napetost: 400 V Priklop: Trifazni Skupne dimenzije

Stanje: rabljeno, Stromab TR350 prečna žaga IDC000098 - kompletna s filtrom - z valjčnimi transporterji Codpfxju Dhzio Afxopu

Stanje: novo, Erhältlich in Arbeitslängen von 3000, 4500, 6000 und 7000 mm Rechts- oder linkslaufend umkehrbar Eloxiertes Aluminiumprofil 105 x 90 mm Verstärkter Zahnriemen 32 mm Einphasenmotor 6 Nm, 115 - 230 V Positioniergeschwindigkeit 60 m/min Wiederholgenauigkeit +/- 0,1 mm Smart 7 Touchscreen-Farbsteuerungseinheit, 7" Display 3 Betriebsarten: Manuell für absoluten oder inkrementellen Betrieb, Voreinstellung mit 8 vorprogrammierten Positionen und automatischer Zuschnittlistenmodus Cjdpfx Ajn Nv Ugsfxepu USB-Anschluss zum Importieren von Zuschnittlisten