Graule nakup rabljenega (72)

Stanje: dober (rabljeno), Leto izdelave: 1982, Krožilna in kotna žaga, vlečna žaga, kap žaga, panelna žaga, kap in kotna žaga, radialna žaga, krožna žaga za dolžinsko kapiranje in kotiranje, radialna ročna žaga -Proizvajalec: Graule Krožilna in kotna žaga tip ZS135 Kedpfx Afeyam Uao Tjdg -Moč motorja: 2,2 kW -Hitrost vrtenja: vrt./min -Žagin list: Ø 420 mm, z možnostjo nagiba -Območje reza: 90° ravno 375 x V170 mm -Območje reza: 45° 260 x 170 mm / 365 x 120 mm -Transportne mere: 1060/835/V1530 mm -Teža: 185 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, Žaga Graule ZS 170, letnik 1996, 2200 EUR Kdjdpjwp Stzjfx Af Teg Rezkar Graule 6/250 - 160, letnik 2008, 2900 EUR Vrtljivi zalogovnik za krila in okvirje, 500 EUR Valjčna proga 7,5 m kot zalogovnik za okna pred postajo za zastekljevanje, 600 EUR

Stanje: rabljeno, Višina reza pri 90°: 135 mm Dolžina reza: mm Območje zamika horizontalno: - Območje zamika vertikalno: -60° do +60° Valjčna proga / odlagalna miza: ne Premer žaginega lista: Število obratov: 2800 obr/min Moč motorja: 2 kW Motorna zavora: da Prisledek: da Razpršilna naprava: da Kjdpfsx I Ai Djx Af Tjdg Priključek za odsesavanje: 100 mm Dolžina stroja: Širina stroja: Teža: 110 kg

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ZS 200 N / 2014/53/40, premer žaginega lista: 520 mm, največja višina reza: 200 mm, vrtljajska hitrost (min.): 2.800 obr/min, dolžina rezanja (maks.): 420 mm, dolžinski omejevalnik: 7.000 mm, Prodajam GRAULE ZS 200 N, krožno žago za prečno in poševno žaganje, z upravljalno ploščo, motornim nastavljanjem vrtenja in nagiba, vključno z valjčnim transporterjem dolžine 7000 mm in 4000 mm z ročnim omejevalnikom s kukalom ter napravo za odsesavanje ostružkov. Stroj je bil redno servisiran pri specializiranem podjetju in je v odličnem stanju. Kdsdpfxeyannze Af Tjg

Stanje: novo, Saw blade diameter: 520 x Ø 50 mm Cutting diameter: 200 mm Cutting length: 420 mm Cutting height at 45°: 140 mm Saw blade specifications: 520x3.6/3.0x50 mm Speed: 2,800 rpm Extraction port diameter: 100 mm Total power requirement: 3.0 kW Machine weight approx.: 310 kg Dimensions (L x W x H): 1,400 x 900 x 1,650 mm - Cross-cut and mitre circular saw for cross cuts - Dual-sided mitre adjustment (60°/45°) with fixed stops - Dual-sided bevel cutting (60°/45°) with fixed stops - Robust cast iron construction - Precise linear guide of the tool carriage with ball bushings on hardened and ground steel shafts - Manual saw feed - Infinitely adjustable blade height - Connection for optional extraction unit Equipment: - 3.0 kW motor for aluminium cutting - Blade tilting via handwheel and worm gear (for bevel cuts) - Saw blade diameter: 520 mm - Saw blade bore: 50 mm - Saw blade speed: 2,800 rpm - 400 V / 3 kW (S6/40%) motor with brake and automatic star-delta starter - Machine weight approx.: 250 kg Cutting Data: Kodpfx Aoxaaxdsf Tedg - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Included Special Accessories: - HM saw blade 520x3.6/3.0x50 mm - Hydraulically adjustable feed brake - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable with lever valve - Pneumatic saw blade spray system - Machine tiltable from the front to both sides via hand crank - Machine base - Powerful drive motor (3.0 kW)

Stanje: novo, Saw blade diameter 350 x Ø 30/40 mm Cutting diameter 135 mm Cutting length 430 mm Saw blade dimensions 350x3.0/2.4x40 mm Speed 3800 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 100 kg Space requirement approx. 1300 x 800 x 1600 mm - Cross-cut and mitre circular saw for cross-cutting operations - Double-sided mitre adjustment (60° / 45°) with fixed stops - One-sided compound cut up to 45°, with fixed stop - Robust cast iron construction - Precision linear ball bearing guide for the tool carriage on hardened and ground steel shafts - Manual saw feed - Saw blade height infinitely adjustable - Port for optional dust extraction Cutting data: - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Kdjdexabqzopfx Af Tsg Special accessories included: - 1x TCT circular saw blade 350 x 3.0/2.4 x 40 mm * Z = 108 FTZ negative for aluminium and plastic - Hydraulic feed brake, infinitely adjustable - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Stanje: novo, Saw blade diameter: 420 x Ø 40 mm Cutting diameter: 170 mm Cutting length: 410 mm Saw blade dimensions: 420x3.2/2.4x40 mm Speed: 3500 rpm Extraction port diameter: 100 mm Total power requirement: 3.0 kW Machine weight: approx. 120 kg Space requirement: approx. 1300 x 800 x 1600 mm - Crosscut and miter circular saws for cutoff cuts * Drive motor 3.0 kW - 400 Volt - Dual-sided miter adjustment (60° / 45°) with fixed stops - Compound cut 45° on both sides with fixed stops - Robust grey cast iron construction - Precision linear ball bearing guide for tool carriage on hardened and ground steel shafts - Manual saw feed - Infinitely variable saw blade height adjustment - Connection stub for optional dust extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Kdjdjxabztjpfx Af Teg Special accessories included: - Compound cut setting via hand crank, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative for aluminum and plastic - Infinitely adjustable hydraulic feed brake - Pneumatic material clamping from above, consisting of: * 2 adjustable vertical clamping cylinders with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Kdsdpfx Afei Dfidj Teg Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N - 5 kW Motor with machine stand, Tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade arbor hole: 50 mm Saw blade speed: 2,800 rpm 400 V / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to approx. 25° for acute angles on one side, and tilted flat to the left up to 30°. TCT circular saw blade 520 x 4.0/2.8 x 50 mm 60 WZ, negative rake, for wood RLH-ST60 measuring stop and roller conveyor, 6.0 m measuring length, mounting side: left Heavy-duty design, length stop carriage adjustable from operator side via handwheel, electronic digital display, stop carriage pneumatically clamping, flip-away stop flap towards the rear, with steel rollers, 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 4 support feet and adapter piece, total length: 6.7 m Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60 infeed roller conveyor, 4.0 m long, mounting side: right Heavy-duty design, steel rollers 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 3 support feet and adapter piece Kodsk H Ic Uopfx Af Todg Location: Ex stock, 54634 Bitburg - Immediately available - Image: similar. Machine is still in original packaging.

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Circular Saws Model ZS 200NF Kedpfxjw Hl Aqj Af Tsdg Crosscut and mitre circular saw featuring a maximum cutting height of 200 mm Robust grey cast iron construction Precision ball bushing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Re-adjustable fixed stops Lower saw blade guard can be connected to extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and adjustable stop Technical Data Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm (at 90°) Cutting height: 200 mm (at 90°) Mitre range - horizontal: 45°- 90°- 25° Mitre range - vertical: 60°- 90°- 30° Saw blade diameter: 520 mm (not included as standard) Extraction port: 100 mm Weight: 490 kg Location: From stock 54634 Bitburg - Immediately available - On request, we are happy to offer you the saw blade as well.

Stanje: novo, Leto izdelave: 2026, Mitre and crosscut circular saw with a maximum cutting height of 170 mm robust cast iron construction precise linear ball bearing guide for the tool carriage on hardened and ground steel shafts manual feed rapid mitre adjustment up to 65° horizontal adjustable limit stops lower blade guard can be connected to an extraction system Model-----Motor-----Speed-----Cutting length ZS 170: 400 V / 2.0 kW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Mitre range horizontal ZS 170 -----170 mm-----45 degrees - 90 degrees Model----- Saw blade-----Extraction port-----Weight ZS 170 -----420 mm-----100 mm -----120 kg Accessories on request: Roller conveyor / length stop types RO, RL, RLK, RLH and RLHK for processing aluminium and PVC profiles as well as wood profile boards. The modular roller conveyor system can be supplied as follows: 3 m Type RO: infeed roller conveyor with at least 2 support legs 3 m Type RLK: roller conveyor with length stop with rear-folding adjustable stop carriage - Machine stand Kdsdpfxecnz N Hj Af Tjg - Main switch lockable - Infeed roller conveyor Ro-St60, 3 meters, right side - Roller conveyor RLK-ST60 L, 3.0 meters measuring length Heavy-duty length stop/roller conveyor version mm scale on rear rail, measuring caliper with magnifier and stop flap - Saw blade 420 x 3.5 x 40, 84 teeth, negative rake Location: Ex stock 54634 Bitburg - loaded free of charge - - immediately available -

Stanje: novo, Leto izdelave: 2026, Product Details Crosscut and Mitre Circular Saws Model ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precision linear ball bearing guide of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable end stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and stop slider Kdsdpjcnz Rvsfx Af Tog Technical Data Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm (at 90°) Cutting height: 200 mm (at 90°) Mitre range, horizontal: 45°-90°-25° Mitre range, vertical: 60°-90°-30° Saw blade Ø: 520 mm (not included as standard) Extraction port: 100 mm Weight: 490 kg Location: Ex stock 54634 Bitburg - Immediately available - We can also supply the saw blade on request.

Stanje: rabljeno, Premer rezkarja: 250 mm Največja globina rezkanja: 80 mm Širina rezkanja: 330 mm Pnevmatska vpenjalna naprava za obdelovanec Ksdpfsx Rbz Dex Af Tjdg Ročni podaj Teža: cca 160 kg

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: diverse, The Professional for Cross-Cutting, Mitre, and Compound Cuts The ZS 200 N is optimally suited for cross-cutting, mitre, and compound cuts. Materials such as wood, PVC, and aluminium profiles can be machined cleanly and precisely. The saw unit runs on a hardened guide arm and can be swung horizontally to mitre on both sides. The 'N' stands for inclination, indicating that the saw unit can also be tilted vertically to the side — allowing for easy compound cuts. ZS 200 N Fact Check - Crosscut and mitre circular saw with a maximum cutting height of 200 mm - Robust grey cast iron construction - Precision ball bearing guidance of the tool carriage on hardened and ground steel shafts - Manual saw feed - Rapid mitre adjustment up to 65° horizontally and up to 60° vertically - Re-adjustable fixed stops, lower saw blade guard - Can be connected to an extraction system - Machine can be tilted to both sides from the front - Hydraulic feed brake Technical Specifications: - Motor: 400 V / 5.0 kW - Speed: 2800 rpm - Cutting length: 420 mm (at 90°) - Cutting height: 200 mm (at 90°) - Mitre range horizontal: 45°-90°-25° - Mitre range vertical: 60°-90°-30° - Saw blade diameter: 520 mm - Weight: 310 kg Scope of Delivery: - Crosscut and compound saw ZS 200 N - Machine stand - Machine tiltable to both sides from the front - Hydraulic feed brake - Circular saw blade HM Z 60 neg. - Operating tools and hand crank Kdodpfeh Nu Iujx Af Tsg

Stanje: novo, Leto izdelave: 2026, Mobile crosscut station with an extremely robust chassis, fully assembled and ready for operation. Included special equipment: - Machine tiltable on both sides from the front - Hydraulic feed brake - Circular saw blade HM 520x50 Z60 W neg. - Mobile underframe, particularly stable Machine specifications: - Constant zero point: particularly suitable when using measuring devices and stop systems (for miter and tilt!) - Powerful three-phase motor, 5 kW, with automatic star-delta start - Sturdy guide arm with 4 linear ball bearings for precise and safe feed-out - Swivels left 45° (miter) - Swivels right 65° (miter) - Tilts left 60°, right 30° - Cutting width at 90°: 420 mm - Cutting width at 45° miter: 295 mm - Cutting height vertical: 200 mm - Cutting height at 45° tilt: 140 mm - Cutting height at 60° tilt: 80 mm - For saw blade 520x50 mm - Extraction nozzle 100 mm - Weight with stand: 300 kg - CE and GS certified, dust-tested Kdsdpfx Asb Nrg Usf Teg - Made in Germany, quality product Chassis specifications: Extremely stable frame construction made of large-dimension profiles, powder-coated, robust steel support rollers with high wall thickness, galvanised and ball-bearing mounted, heavy-duty double-stop swivel castors with PU running surface, very easy to move Roller width: 450 mm Supports adjustable via threaded spindles Roller track 1500 mm per side Stop length 2750 mm per side Overall length: 5990 mm Stop profile heavily ribbed, 100x50 mm, anodised aluminium (extendable as an option) 1 folding stop right and left Measuring tape right and left Shipping available at extra cost. We only ship within the EU. No shipping outside the EU.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 520 mm, vrsta vhodnega toka: trifazni, skupna dolžina: 1.750 mm, skupna višina: 1.800 mm, skupna širina: 1.030 mm, izvrtina žagine plošče: 50 mm, vhodna napetost: 400 V, ❇️ Graule ZS 200 N – Crosscut & Mitre Saw | Excellent Condition | Fully Operational | UVV Safety Tested For sale on behalf of a customer: a high-quality Graule ZS 200 N crosscut and mitre saw from a window manufacturing facility. The machine is in excellent, well-maintained, and fully functional condition, and was in regular use until recently. UVV/Safety inspection has been carried out (see photos). Inspection and functional testing on site are possible at any time. ⸻ ❇️ Technical Data: • Manufacturer: Graule Maschinenbau GmbH, Aalen • Model: ZS 200 N • Machine type: Crosscut & Mitre Saw (for aluminium, wood, plastics) • Saw blade Ø: 520 mm • Bore: 50 mm • Swivel range: large mitre range (fine scale) • Drive: 400 V • Application area: Primarily for aluminium and profile machining • Design: Heavy-duty industrial standard version ⸻ ❇️ Features & Highlights • Very robust machine stand • Large work table on both sides (laminated multiplex) • Pneumatic hold-down clamps • Extraction hood / extraction nozzle • Digital measuring/stop system (display mounted above) • Precise swivel mechanism with angle scale • Ideal for aluminium profiles in window construction • Ready for immediate use • Only original Graule circular saw blades permitted (manufacturer’s note) ⸻ ❇️ Condition • Excellent, well-maintained, immediately operational • Fully functional • Clean appearance • Still in use • UVV safety tested ⸻ ❇️ Sales & Processing • Invoice with VAT shown possible • Delivery or transport available at extra cost • Location: 72229 Rohrdorf Kodpfx Afox N Hxxs Tedg • Loading facility with overhead crane on site ⸻ ❇️ Price: Offer price (net): €8,990 plus VAT ⸻ ❇️ Dimensions: • approx. D 175 cm x W 103 cm x H 180 cm ⸻ ⚠️ I am offering further workshop and metalworking accessories in my other listings. ‼️ Please also have a look at my other items—it’s worth it!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, 5 kW, 7,5 KM, przejezdna na solidnych kołach skrętnych Wysokość cięcia 200 mm Wysokość cięcia przy 45°: 140 mm Odchylana w lewo do 60° Kdjdpfodxxadex Af Teg Odchylana w prawo do 45° Długość cięcia przy 90°: 420 mm Długość cięcia przy 45°: 300 mm Odchylanie w lewo 60°, w prawo 30°, regulacja korbą ręczną od tyłu (na życzenie również od przodu) 1 tarcza pilarska 520 x 4,4 x 50 mm, 60 zębów naprzemian skośnych, negatywny kąt Lewa prowadnica rolkowa ze skalą i ogranicznikiem, długość 2000 mm do tarczy pilarskiej Długość maszyny 4000 mm 1 przedłużenie prowadnicy rolkowej ze skalą i drugim ogranicznikiem Mocowana z lewej, długość 4000 mm. To przedłużenie prowadnicy posiada wysuwaną miarkę z ogranicznikiem, co umożliwia precyzyjne przycinanie drewna po lewej stronie do 7500 mm. 1 podajnik rolkowy, mocowanie z prawej strony, długość do tarczy pilarskiej 2000 mm Opcje: pneumatyczny docisk materiału, wskaźnik linii cięcia laserowego

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, nazivna moč: 5 kW (6,80 KM), 5 kW / 7.5 HP Cutting height: 200 mm Tiltable up to 60° to the left, up to 30° to the right (adjustable from the front via handwheel) Cutting height when tilted at 45°: 140 mm Cutting width: 420 mm; cutting width when swiveled at 45°: 290 mm Swivels up to 60° to the left, up to 45° to the right Includes saw blade for wood 6,000 mm heavy-duty outfeed roller conveyor, mountable on the left side, stop slide adjustable from the machine using a handwheel, pneumatically lockable, length digitally readable, digital display with 230V power supply Kdjdpedxw U Ijfx Af Teg 4,000 mm heavy-duty infeed roller conveyor, mountable on the right side Machine can be tilted on both sides from the front by handwheel and worm gear Optional extras available upon request, e.g., increased cutting height, material clamping, and laser cutting indicator

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Données techniques : Hauteur de coupe : 200 mm Hauteur de coupe à 45° incliné : 140 mm Pivotant à gauche jusqu’à 67° Pivotant à droite jusqu’à 45° 5 kW 1 frein d’avance hydraulique (en option) Longueur de coupe : 420 mm en position à 90° Longueur de coupe à 45° pivoté : 295 mm Inclinable à gauche : 60°, à droite : 30° Le réglage de l’inclinaison se fait à l’avant par manivelle. 1 lame de scie pour bois, diamètre 520 mm 1 convoyeur à rouleaux d’arrêt, lourd, longueur 6 000 mm, côté de montage gauche. La butée se règle par volant à main à l’avant. La longueur est lisible au millimètre près sur afficheur digital. La butée est verrouillée pneumatiquement. Kdedpen R A Ewefx Af Tjg 1 afficheur digital, version 230 volts 1 convoyeur à rouleaux d’alimentation lourd, côté de montage droit, longueur 4 000 mm Longueur de la machine : 11 700 mm Entièrement mobile Machine emballée sur chevrons Les photos montrent la machine d’un client. Disponible sur demande aussi avec hauteur de coupe de 215 mm ou 240 mm.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, 3 kW motor nagib v levo 45°, v desno do 25° prek ročnega ročaja zadaj, na željo proti doplačilu tudi spredaj levo vrtljiv do 60° desno vrtljiv do 45°, širina reza 300 mm pri nagibu Višina reza 170 mm, širina reza 430 mm pri 90 stopinjah 6 m izhodni valjčni transporter z merilno lestvico in omejevalnikom na levi (stran montaže valjčnih trakov je mogoče zamenjati) Kodpfecyd N Hex Af Tsdg 4 m dovajalni valjčni transporter desno 1 kos stojalo za stroj 1 kos žaginega lista za les ali aluminij

Stanje: rabljeno, Combined pull and table saw Graule AGT. The pull saw is tiltable and swiveling. Kdedowqphlspfx Af Tsg The machine can also be used as a pull saw only by removing the table. Cutting height: 85/40 mm Cutting length: max. 380 mm

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Sale of a complete production line for aluminium frames & insect screens Ideal for window manufacturers, craft businesses & producers For sale is a comprehensive, coordinated set of machinery and workshop equipment for the production of: - Aluminium frames for wood-aluminium windows - Renovation aluminium frames - Insect screen tension frames The equipment is suitable both for established businesses seeking to expand their range of manufacturing capabilities and for start-ups or newcomers wishing to take over a ready-to-use production line. Ksdpfx Afex Nbnho Todg Key features: - Preferably sold as a complete package - Partial sale of individual machines possible - Field-tested, functionally coordinated machines - Independent in-house manufacturing possible - Significant cost savings compared to new procurement Commissioning, training & know-how transfer: On request, I offer the buyer personal training and a thorough induction. The goal is to transfer specialist knowledge acquired over decades. The induction can include: - Introduction to the complete production process - Optimal machine settings - Efficient manufacturing - Avoidance of common mistakes - Support during commissioning Advantages for the buyer: - Immediate start of production - Reduced dependence on suppliers - Diversification of the product portfolio - High added value - Know-how transfer included Reason for sale: The sale is due to retirement and a career change. Further information: - Machine list and further details available on request - Scope of training to be arranged - Collection by appointment If interested, please get in touch. I am open to all options and arrangements.

Stanje: novo, Crosscut and Mitre Circular Saw GRAULE ZS 170 N - tiltable - Included: - Crosscut and Mitre Circular Saw GRAULE ZS 170 N - tiltable - - without machine stand and saw blade - Kdedpeu R Sypefx Af Teg Included: - Machine Stand GRAULE for type ZS 135 N and ZS 170 N Included: - Infeed Roller Conveyor GRAULE type RO complete with support legs and connecting angle Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for roller conveyor height 885 +/- 10 mm Included: - Roller Conveyor/Length Stop GRAULE type RLK with scale and material stop foldable to the rear. Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for roller conveyor height 885 +/- 10 mm - new showroom machine -

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer orodja: 450 mm, vrtljajska hitrost (min.): 2.800 obr/min, največja hitrost vrtenja: 2.800 obr/min, skupna masa: 400 kg, največja višina reza: 153 mm, hitrost žaginega lista: 2.800 obr/min, montažni premer: 40 mm, moč: 0,003 kW (0,00 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Fasadna žaga GRAULE tip AS 450 prevoz 300 EUR Motorji 2x 400 V/3,0 kW Hitrost vrtenja 2800 o/min Premer navpičnega rezila 450 mm Kdsdothdrwepfx Af Tog Premer vodoravnega rezila 400 mm Premer pritrditve rezila 40 mm Višina reza 153 mm Globina reza 110 mm Širina reza 250 mm

Leto izdelave: 1994, Stanje: rabljeno, Premer žaginega lista – vertikalno: 450 mm Premer žaginega lista – horizontalno: 350 mm Višina izreza: 153 mm Globina izreza: 110 mm Širina izreza: 250 mm Pnevmatske vpenjalke za material Mazanje s hladilno tekočino Teža: pribl. 450 kg Kdjdpfjx Ivk Iox Af Tog