Kotna žaga z Beck ES-F3

Graule ZS 170 N

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Krožna žaga z radialno roko, model ZS 170N Ijdpfez Nk Elox Aqujbc Za rezanje aluminija, PVC-ja in lesa - krožne žage za prečno rezanje in poševno rezanje za ravna prečna rezanja in poševna rezanja na levo in desno - stabilna konstrukcija iz sivega litega železa - natančna vodila z jeklenimi kroglicami za drsno ploščo orodja na kaljenih in brušenih jeklenih gredih - ročno podajanje žage - hitra nastavitev za poševno rezanje do 25° - ponovno nastavljivi fiksni opori pri 90° in 45° - spodnji zaščitni pokrov žaginega lista lahko priključimo na sistem za odsesavanje Motor: 400 V / 3,0 kW Dolžina reza: 410 mm Globina reza: 170 mm Premer žaginega lista: 420 mm Žaga je opremljena s pnevmatično objemko, enoto za mazanje in hidravlično zavoro za podajanje žage. Stroj je pripravljen za uporabo, žagin list pa je nabrušen. Stroj lahko dostavimo na vaš naslov prek spletne službe DSV (na zahtevo).

Stanje: novo, as well as other types, as a package Iedjf Ddzqspfx Aquebc

Stanje: novo, Saw blade diameter: 420 x Ø 40 mm Cutting diameter: 170 mm Cutting length: 410 mm Saw blade dimensions: 420x3.2/2.4x40 mm Speed: 3500 rpm Extraction port diameter: 100 mm Total power requirement: 3.0 kW Machine weight: approx. 120 kg Space requirement: approx. 1300 x 800 x 1600 mm - Crosscut and miter circular saws for cutoff cuts * Drive motor 3.0 kW - 400 Volt - Dual-sided miter adjustment (60° / 45°) with fixed stops - Compound cut 45° on both sides with fixed stops - Robust grey cast iron construction - Precision linear ball bearing guide for tool carriage on hardened and ground steel shafts - Manual saw feed - Infinitely variable saw blade height adjustment - Connection stub for optional dust extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Special accessories included: - Compound cut setting via hand crank, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative for aluminum and plastic Isdpfxsxabztj Aqujbc - Infinitely adjustable hydraulic feed brake - Pneumatic material clamping from above, consisting of: * 2 adjustable vertical clamping cylinders with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, HM-krožno žago za aluminij in plastiko, 420 x 3,2 x 40 mm, 108 zob, negativen kot Hidravlična zavora za nadzor napredovanja Pnevmatska napenjalna naprava za material, dvostranska, od zgoraj Pnevmatska naprava za brizganje hladilnega sredstva na žago Pnevmatska servisna enota, sestavljena iz ločnika za vodo, ventila za zmanjševanje tlaka z manometrom in dozirnika za olje Prečna vodila za rezanje pod ostrimi koti Stojalo za stroj Iodjzu Azdjpfx Aquobc

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Natančno kotalno vodenje po kaljeno brušenih vodilih. Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Motor z močjo 3 kW. Iodpfjdy Hm Dsx Aqujbc Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Največja globina utora/izreza 60 mm. Širina utora/izreza: 60 mm v enem prehodu. Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Stroj je opremljen s podstavkom.

Stanje: novo, Crosscut and Mitre Circular Saw GRAULE ZS 170 N - tiltable - Ibodpfx Aou R Sypoquec Included: - Crosscut and Mitre Circular Saw GRAULE ZS 170 N - tiltable - - without machine stand and saw blade - Included: - Machine Stand GRAULE for type ZS 135 N and ZS 170 N Included: - Infeed Roller Conveyor GRAULE type RO complete with support legs and connecting angle Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for roller conveyor height 885 +/- 10 mm Included: - Roller Conveyor/Length Stop GRAULE type RLK with scale and material stop foldable to the rear. Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for roller conveyor height 885 +/- 10 mm - new showroom machine -

Stanje: rabljeno, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Ijdpfx Aqeiixxneusbc Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with hand crank: yes Roller conveyor / support table: no Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: Ibsdoh Ek Daopfx Aquoc - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 2024/121/47, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 420 mm, GRAULE crosscut and mitre circular saw Type ZS 170 N (tiltable) Isdpfx Aqjtwz Tlsujbc 400 Volt three-phase brake motor 2.2 kW Saw blade diameter: 420 mm Blade bore: 40 mm Cutting height: 170 mm Blade tilted at 45°: cutting height 115 mm, cutting length 410 mm Including the following accessories: 1 pc. machine tiltable from behind on both sides by hand crank: from 90° to the left up to 45° and to the right up to approx. 30°, up to approx. 60° 1 pc. TCT (carbide-tipped) circular saw blade 420x3.4/2.4x30 mm, 48 teeth, negative hook angle for wood 1 pc. machine stand

Stanje: novo, Description: - Crosscut and mitre circular saw with a maximum cutting height of 170 mm - Saw head manually adjustable for mitre cuts on two planes - Robust grey cast iron construction - Precision linear ball bearing guide for the saw head on hardened and ground steel shafts - Manual saw feed - Rapid mitre adjustment up to 25° horizontally and up to 45° vertically - Adjustable positive stops at 90° and 45° - Lower blade guard can be connected to an extraction system Scope of delivery: 1 x Graule crosscut and mitre circular saw type ZS 170 N Isdpsvwf N Tefx Aquebc incl. surcharge for 3 kW 400 Volt motor Technical data: - Motor: 400 V / 3.0 kW - Speed: 3,500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Mitre range vertical: 90°-45° (tilts left) - Saw blade diameter: 420 mm - Extraction connection diameter: 100 mm - Weight: 120 kg

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package Ibjdeiu Smbjpfx Aqusc

Stanje: novo, Description: - Crosscut and mitre circular saw with a maximum cutting height of 170 mm - Saw head adjustable in two planes for mitre cuts - Sturdy cast iron construction - Precision ball bushing guide for tool carriage on hardened and ground steel shafts - Manual saw feed - Quick mitre adjustment up to 25° horizontally and up to 45° vertically - Adjustable fixed stops at 90° and 45° Isdjvwf Rdspfx Aquobc - Lower blade guard connectable to extraction system Scope of delivery: 1 x Graule crosscut and mitre circular saw, Type ZS 170 N incl. surcharge for 3 kW 400 Volt motor 1 x machine stand for types ZS 135 N and ZS 170 N Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Mitre range vertical: 90°-45° (tilted to the left) - Saw blade diameter: 420 mm - Extraction connection diameter: 100 mm - Weight: 120 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina žagine plošče: 40 mm, Oprema: dokumentacija / priročnik, Krožna žaga za vzdolžne in poševne reze Tip: ZS 170N Motor: 400 V / 2,0 kW Hitrost vrtenja: 3500 obr/min Dolžina reza: 410 mm (pri 90°) Višina reza: 170 mm (pri 90°) Ijdpfxjypwhpe Aqusbc Območje poševnih rezov - horizontalno: 45°-90°-25° Območje poševnih rezov - vertikalno: 90°-45° (levo) Premer žaginega lista: 420 mm Premer odsesovalnega nastavka: 100 mm Teža: 120 kg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Polavtomatski horizontalni stroj za spiralno ovijanje, zasnovan za ovijanje dolgih izdelkov, kot so les, aluminijasti profili, plastični ekstrudati, cevi, tekstil in podobni materiali. Opremljen s dovodi in odvodnimi valjčnimi transporterji za enostavno rokovanje z izdelki. Model: Robopac Compacta 12 Letnik proizvodnje: 2024 Priključna moč: 1,5 kW Premer: 1200 mm Dovodni valj: Da Odvodni valj: Da Isdpfxezkf Sko Aquebc Stanje: Novo (nerabljeno) Transportni trakovi, 2 kosa: VKLJUČENO