GRAULE ZS 170 N žaga za prečni in poševni rez - nagibna -

GRAULE Abläng- und Gehrungskreissäge ZS 170 N

Stanje: novo, Naprava za pritrditev steklenih letvic "2 P Jumbo automatic E.C." - nova - Vaše prednosti: - Kotni spoje je mogoče zapreti - Ni odprtih razpok na steklenih letvicah - Med lakiranjem ni barvnih razlik - Okvire steklenih letvic je enostavno razporediti Stroj za kotne spoje s sponkami 2P Jumbo Automatic E.C. za pritrditev okvirjev steklenih letvic s sponkami. Možnost izbire med avtomatskim in ročnim načinom delovanja; Z nastavljivim kotom, pritrdilno napravo od zgoraj in spredaj Pritisk je mogoče ločeno nastaviti. Možnost uporabe vzporednih in prekritih sponk s pomočjo elektronske programirljive krmilne enote. Napravo za sponke je mogoče namestiti na primerno delovno mizo, upravljanje s pomočjo nožnega pedala. ----- Cena za to izvedbo na zahtevo! Dodatno se zaračunava zakonski davek na dodano vrednost ter embalaža/stroški pošiljanja. ----- Slike prikazujejo stroj za kotne spoje s sponkami 2P z možnostjo nastavljive delovne mize (glejte podrobnosti v razdelku "Dodatna cena"). Dodatne cene: ----- Nastavljiva delovna miza višinsko nastavljiva od 700 do 1000 mm, 2 podstavka, ki ju je mogoče vstaviti dolžina 1000 mm, 2 podstavka, ki ju je mogoče vrteti in premikati dolžina 1000 mm, podstavki oblazinjeni s filcem, 4 kolesa, od tega 2 s zavoro. ----- Dodatna cena: 1.311,00 EUR neto Sponke: paketi 15 mm sponke (paket s 2000 kosi): cena 22,00 EUR 12 mm sponke (paket s 3000 kosi): cena 32,00 EUR 10 mm sponke (paket s 3000 kosi): cena 32,00 EUR Dimenzije in teže Csdjvnh T Nopfx Aahehb ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Delovna miza 32 kg Vse cene so neto. Dodaten davek na dodano vrednost se obračunava posebej. Dobava iz tovarne, dodatno se zaračunavajo embalaža in stroški pošiljanja. (tehnični podatki po podatkih proizvajalca – brez jamstva!)

Stanje: novo, Leto izdelave: 2025, Modern, high-performance and universal double mitre saw for wood, aluminium and PVC profiles. Stock machine: Subject to prior sale Cedpfexta Tusx Aahohb - Large cutting capacity (165 mm cutting depth at the table) - Double cuts possible - Intermediate angles can be steplessly fixed - Pneumatic tilting as standard - Hydropneumatic saw feed, infinitely adjustable - Torsion-resistant machine bed - Tilting range for both units: 22.5° inwards, 90°, 135° outwards - Precision-ground saw table / saw bed plate - Direct position measurement system (magnetic sensor) in all models - JETTER drives and control systems - 15" industrial touch panel (IP65)

Stanje: novo, as well as other types, as a package Cedpfx Aof Ddzqjahshb

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, največja višina reza: 145 mm, največja širina rezanja: 510 mm, skupna masa: 400 kg, premer ekstrakcijske šobe: 150 mm, vrtljajska hitrost (min.): 2.800 obr/min, moč: 5,5 kW (7,48 KM), STROMAB PS 50/F Crosscut Swing Saw - Brand NEW Specification: • Condition: New • Motor power: 5.5 kW • Blade diameter: 500 mm • Motor shaft diameter: 30 mm • Motor speed: 2,800 rpm Coderdwm Tspfx Aahehb • Max. cutting width: 510 mm • Max. cutting height: 145 mm • Additional extension tables: 2 x 2 m • Weight: 400 kg • Year of manufacture: 2024/2025 • Noise emission: 85.5 dB(A) • CE compliant Additional information: • The tables shown in the pictures are included with the machine (2 x 2.0 m) • Available within 7–10 working days • Price does not include VAT or transport costs

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Natančno kotalno vodenje po kaljeno brušenih vodilih. Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Motor z močjo 3 kW. Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Največja globina utora/izreza 60 mm. Chsdpfxedy Hm Do Aahsb Širina utora/izreza: 60 mm v enem prehodu. Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Stroj je opremljen s podstavkom.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control Csdpfx Aeuiy Ngjahehb - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training

Stanje: novo, Leto izdelave: 2024, Système automatique de mesure de longueur et de positionnement pour toutes les scies à tronçonner STROMAB ainsi que pour toutes les machines similaires d’autres fabricants. Il sert à la fois de butée et au positionnement des pièces. Composé de: Profilé en aluminium 105 x 90 mm, anodisé Cedpjxraucsfx Aahjhb Entraînement par courroie crantée 32 mm, renforcée avec fil d’acier Moteur pas à pas 6 Nm, multi-tension 115-230 V – 50/60 Hz Précision de répétition +/- 0,1 mm Vitesse de positionnement 60 m/min. Commande Type SMART 7 avec écran tactile 7 pouces Mode d’usinage absolu et incrémental 8 valeurs standards préréglées 2 versions logicielles avec différents niveaux d’optimisation optionnellement disponibles. ZM 415 – Longueur de travail utile 4.500 mm ZA333 – Table à rouleaux 4.500 x 280 mm, diamètre rouleaux 32 mm ZA341 – Support frontal 4.500 x 260 mm ZA373 – Câble de verrouillage pour scie à tronçonner existante

Stanje: rabljeno, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with hand crank: yes Roller conveyor / support table: no Chodpfx Aoiixxnoahjb Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Chsdoi Dfidepfx Aahob Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation Csdpfx Aash Ek Daohehb - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.