Stegherr Ksf nakup rabljenega (10)

Stanje: pripravljen za uporabo (rabljen), Križni rezkar Proizvajalec: Stegherr Tip: KSF Primeren za rezkanje križnih povezav npr. pri oknih, vratih in pohištvu Opremljen s 3 rezkalnimi agregati: Zgornji in spodnji rezkalni agregat istočasno obdelujeta dve mitrasto podobni izsekanini, tretji agregat pa hkrati izvede ploskovno zarezo. Strojna miza se pomika pnevmatsko-hidravlično. Hitrost pomika naprej in nazaj je nastavljiva. S stopalko Iedpfx Ajw Imhcjh Ajtr 2 motorja, vsak cca. 2,2 kW Priključna moč cca. 4,5 kW Tlak zraka: 6 bar Napetost: 380 V 50 Hz Premer odsesovalnega priključka: 180 mm Vključno s 3 kosi rezkalnih orodij

Stanje: rabljeno, Leto izdelave: 1996, End stop yes yes /no Machine dimensions 1000x1000x1300 mm Weight 800 kg Cross Mullion Router STEGHERR KSF-2 / E-4 - Year of manufacture: 1996 - Serial No.: 57/9961 - Function-tested - Including milling tools: 1. Upper milling unit for 90° slotting 2. Lower milling unit for 90° slotting 3. Rear milling unit for flattening 4. Milling unit for processing the counterpart without turning - Length stop with electronic measuring system up to approx. 2500 mm - Tool diameter 2 x 130 mm / 2 x 160 mm - Motors: 3 x 1.1 kW - Voltage: 400 V, 50 Hz - Workpiece max. 56 x 80 mm – min. 8 x 6 mm - Extraction nozzle D = 150 mm Iedpfx Ahjxq Hiqs Ajtr - Machine dimensions L=1000 mm, W=1000 mm, H=1300 mm - Length stop dimensions L=3000 mm, W=1000 mm, H=2000 mm - Total weight approx. 800 kg The KSF-2/4 cross mullion router is successfully used worldwide. Our customers appreciate the precision, robustness, and versatility of this proven machine. The notches for the cross mullion are made in one operation by an upper and a lower milling unit, and the flattening is done by a third milling unit. Once the workpiece is inserted and the button is pressed, clamping and cross mullion routing is automatic. The additional front grooving unit (the fourth unit) enables chip-free, perfectly machined muntin crosses on the visible side even for pre-profiled bars. This ensures the high fitting accuracy of all cross mullions produced with our KSF-2/4 cross mullion router.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, KSF-2E je vodilni svetovni specializirani CNC rezkalni stroj za popolnoma avtomatizirano proizvodnjo in celovito obdelavo visokokakovostnih prečnih povezav in mrež pri serijski izdelavi križev za okna in vrata. Zahvaljujoč agregatom stroj proizvaja prečne spoje iz lesa, aluminija, MDF ali PVC v odlični kakovosti in popolno obdeluje vse elemente mreže križa. OPERACIJE • Prečne povezave v različnih izvedbah in dimenzijah • Obdelava koncev križev • Rezanje okvirnih profilov po meri. Stroj je dodatno opremljen s prečnim podajalnikom / skladiščem elementov. Itjdpfxsxl Dnaj Ah Aer

Stanje: rabljeno, Number of milling spindles: 2 pcs. Stop: 1 pc. Tool included: yes Itsdpfxowi Upfe Ah Asr Cross rail milling machine STEGHERR, model KSF-mini ----- Including stop rail with measuring scale and sliding stop. Including tools. Special milling machine for efficient production of cross muntin joints. The cross rail milling machine KSF-mini is the result of STEGHERR's extensive experience in the construction of these specialized machines for cross muntin joinery. With the KSF-mini, all types of cross muntin joints commonly found in practice can be produced quickly and with a precise fit. Pre-profiled muntins can also be processed on the KSF-mini. Precise recessing is achieved as the workpiece is processed on three sides in a single clamping operation. The tool drive is provided by two three-phase motors; workpiece clamping is pneumatic. The profile cutter is designed for the bar width. The saw blades used for notching can be adjusted to the dimensions of the profile cutter using spacers. The machine is suitable for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V, 50 Hz Pneumatic pressure: 6 bar Included: ----- Table stand Foot switch Tools as shown in the pictures: 1 profile cutter 3 saw blades (for bar width 10 mm) Stop rail with measuring scale and sliding stop as shown in the photos. Installation dimensions (approx. LxWxH): 1,330 x 570 x 1,430 mm Weight: approx. 150 kg (All technical data as per manufacturer, without guarantee!)

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Profile cutting saw Stegherr GLS(S) For aluminium, plastic, and wood With automatic infeed and outfeed for bars up to 6000 mm in length Saw angle horizontal steplessly adjustable from 45–135° Saw angle vertical steplessly adjustable from 70–110° Saw blade diameter 330 mm Drilling units from left, right, and above 4-spindle drilling unit from the left Central extraction controlled via slide gate Online control Isdowq Sk Aspfx Ah Astr Year of manufacture: 2012

Stanje: dober (rabljeno), Leto izdelave: 2003, Processing of posts, boards, and battens at the ends for tear-free machining. Iedpfxegmt Ers Ah Astr With a magazine that operates automatically. 2 milling spindles move independently from the outside toward the center to prevent tear-out.

Stanje: rabljeno, Leto izdelave: 1999, No. 3076 STEGHERR NFT Cross Bar Groove Milling Machine Used, year of manufacture: 1999 Specialized milling machine for cutting a groove on the top side of pre-milled glazing bars. Automatic workflow: The pre-milled glazing bar is positioned against the stop and centered. The milling process starts automatically when the profile is pressed against the stop. The milling unit moves upward and then automatically returns to its starting position after the operation is complete. Milling motor: 400 V; 1.1 kW; 2.5 A Compressed air connection: 6 bar Machine is ready to connect. Includes mobile base frame. All technical details are subject to change and provided as per manufacturer’s brochure, without guarantee. Private sale; VAT cannot be shown. Collection in 73430 Aalen. Transport dimensions approx. 600 x 400 x 1500 mm (L x W x H) Weight approx. 60 kg Iodpfeiyp D Dox Ah Astr To avoid misunderstandings, it is possible and recommended to inspect the machine on site by appointment. Sale as-is. Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded. Sold as inspected. Pictures and videos are for reference only and do not represent the actual scope of delivery. Payment terms: Payment before collection or shipping. Delivery terms: Ex works location.

Stanje: zelo dobro (rabljeno), Cross-milling machine. Ijdpfxjv U D Aae Ah Aetr

Stanje: rabljeno, used, good condition Manufacturer: Stegherr Model: BV Speeds: stepless, 3 - 18 m/min. Location: 97447 Gerolzhofen, free loaded, unpacked Iodpfsvwfn Aex Ah Astr Transfer in as-is condition, as inspected, without warranty or guarantee

Stanje: zelo dobro (rabljeno), Curved Sheet Feeder BV Material Clearance 120/100 Ijdpfx Ahorbk E He Aetr Feed Speed 2-13 m/min Three-phase Motor Feed Rollers 90 mm The feed rollers have been replaced