PNEVMATSKI STROJ ZA REZANJE

Stromab TR 500

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 220992, STROMAB TR 500 MATRIX CROSSCUT SAW WITH ELECTRONIC PUSHER – CE STANDARDS – USED - Infeed table with rollers and MATRIX electronic pusher, 6000mm - Outfeed table, 1500mm - Motor: 10 HP - Blade diameter: 500mm - Blade rotation speed: 3500 rpm - Maximum cutting capacity: 360 mm (W) x 55 mm (H); 200 mm (W) x 135 mm (H) - Minimum cutting section: 20 mm (W) x 10 mm (H) - ELCO CNC control Lsdpfx Aaot U I A Hjysai - 415 volts - Serial no. 220992 - Year: 2002

Stanje: rabljeno, STROMAB TR 500 – Under-table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideally suited for precise and efficient cutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 — Technical Specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & Delivery Ljdoxiza Uopfx Aayjai The machine is in excellent technical condition and ready for immediate use. • Inspection possible at any time • Secure palletised shipping by freight carrier available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to changes and errors.

Stanje: rabljeno, Leto izdelave: 2005, skupna višina: 1.750 mm, skupna dolžina: 1.350 mm, skupna širina: 1.350 mm, Cena: Po dogovoru Optimirna čelilna žaga Stromab TR 500 Matrix 4 4000 Leto izdelave: 2005 Moč motorja: 10 KM Avtomatski potisni sistem Inkjet tiskalnik - Leto izdelave: 2005 - Dokumentacija na voljo: Ne - Serijska številka: 250143 - Glavna moč motorja [kW]: 7,5 - Najv. širina reza [mm]: 375 - Premer gredi žaginega lista [mm]: 30 Lsdewq U Dxepfx Aayeai - Dolžina podajalne mize [mm]: 4300 - Dolžina izhodne mize [mm]: 2000 - Transportne dimenzije: 1350mm x 1350mm x 1750mm (d x š x v) - Transportni paketi [kos]: 3 Finančne informacije DDV: Oglašena cena je brez DDV DDV/obrnjena davčna obveznost: DDV je odbiten za podjetja Dostava in možnost odkupa možno kadarkoli za vso industrijsko opremo Yorick Diebels

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Laodshw Ng Ispfx Aayoi Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimizing automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity according to cutting diagram - Cutting capacities: - 135 x 280 mm - 125 x 295 mm - 95 x 325 mm - 80 x 340 mm - 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cut unit - 8° inclined work table - Minimum workpiece thickness: 10 mm - Safety cover over cross-cut unit - CE standard - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction performance: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air speed at port center: approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and mass measurement via servo motor - Pneumatic pusher lift at end of cycle and overhead return - Photocell for workpiece length measurement - Photocell for defect reading – marking with fluorescent chalk - Working surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimal waste, and priority) - Standard USB and Ethernet ports - Includes "OPTI" Automatic measuring function for the workpiece to be cut. Optimal solution for processing material with variable lengths, with single or pack feeding Laodpsv A Htdjfx Aayji - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes "OPTI PLUS" Function for reading markings to ensure full optimization and removal of knots and defects. - Markings with chalk Option: - Pneumatic side clamp €850.00 - Cutting list creation via PC €360.00 - Outfeed table €360.00/m

Stanje: rabljeno, Leto izdelave: 2016, skupna višina: 1.600 mm, skupna dolžina: 14.100 mm, skupna širina: 1.600 mm, Teža: 2.500 kg - Leto izdelave: 2016 - Dokumentacija na voljo: Da - CE oznaka prisotna: Da - Serijska številka: 6237 - Napetost [V]: 415 - Poraba toka [A]: 20 - Transportne mere: 14.100 mm x 1.600 mm x 1.600 mm (d x š x v) Lasdpfx Aaownh N Njyji - Transportna teža [kg]: 2.500 kg - Transportni paketi [kos]: 4 Finančne informacije DDV: Navedena cena je brez DDV DDV/Obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkupi so možni kadarkoli za vse iz industrijskega področja Yorick Diebels