Kapna žaga

Stromab TR 500 MATRIX

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: MR006589, Visokokakovostni, hitri čelilni žagalni stroj z avtomatskim potisnim sistemom in programsko opremo za optimizacijo. Stroj je opremljen s funkcijo zaznavanja napak v materialu z uporabo krednih črt in vključuje naslednje opcije: - Pnevmatski pritisni cilinder na desni strani žage Njdpoy I N Aksfx Abijwl - Pnevmatski pritisni cilinder na levi strani žage - Paket 'OPTI' z zaznavanjem dolžine materiala in dodatnimi optimizacijskimi kriteriji - Paket 'OPTI PLUS' s fotocelico za prepoznavanje napak v materialu - Stroj z izhodno mizo (na meter) - Tiskalnik etiket - MO9416XLTD Tehnične specifikacije: - Kot reza: 90 ° - Največja dolžina reza: 360 mm - Največja višina reza: 135 mm - Največja potisna dolžina: 6000 mm - Uvoz seznama rezov: Da - Senzor krednih črt: Da - Največji premer žaginega lista: 500 mm - Moč motorja: 10 KM - Serijska številka: 10561

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 1.234 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 7.000 mm, dolžina pomika po osi Y: 600 mm, dolžina podajanja os Z: 250 mm, hitrost pomika os X: 80 m/min, skupna dolžina: 8.000 mm, skupna višina: 1.800 mm, skupna masa: 2.000 kg, premer žaginega lista: 500 mm, premer diska: 500 mm, dolžina mize: 7.000 mm, Oprema: USB priključek, Na prodajo ponujam optimirko STROMAB MATRIX TR 500 v zelo dobrem tehničnem stanju, uporabljeno v manjši proizvodni delavnici, predvsem za razrez konstrukcijskega lesa. Uporabljena za izdelavo montažnih hiš. Stroj je popolnoma delujoč in redno servisiran. Pripravljen za uporabo brez dodatnih investicij. Prodaja na račun z DDV. MOŽNOST PREIZKUSA NA LOKACIJI CENA po dogovoru. Nwodpfx Abswp Rvhjiel

Stanje: novo, Leto izdelave: 2026, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Worktable inclined by 8° Technical features of the cutting unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400 V / 50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE ON LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful feed motor for package weights up to 80 kg Maximum feed system speed: 90 m/min Pneumatic pusher lift at end of cutting cycle and overhead return. Data input management: 12” TOUCH-SCREEN controller (800x600 pixels) Nwjdpfx Abohw Ng Isiol USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit cutting cycles (patterns) and input them directly on the controller Transfer cutting lists created on a PC via USB or Ethernet port Operating software: Manual input of loading board length Partial optimization without reading finished lengths Cutting cycle with 3 optimization options (maximum length, sequence, board sequence) Up to 1,000 cutting lists with 11 dimensions each, or a single list with 10,000 consecutive dimensions "OPTI" package: automatic board length detection and full optimization. Piece length detection by photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board sequence, volume, minimal waste, and priority length) "OPTI PLUS" package: complete optimization including knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during wood mapping Marking with fluorescent crayons/pencils (Note – Only orderable in combination with ZA250) Pneumatic side clamping device Software for creating lists on PC in XML format

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully Automatic Optimizing Cross-Cut Saw with Full Optimization TR-500 MATRIX-6000 - Main motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm Nsdpfx Abov A Htdjiswl - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 s - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE compliant - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction outlets: 4 x Ø 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air velocity at the nozzle center: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and servomotor-based measurement - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell workpiece length measurement - Photocell defect detection - Fluorescent chalk marking - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12” touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization modes (maximum length, sequence, and workpiece sequence) - 3 optimization modes (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing variable length material with single or bundle feeding - 6 optimization modes (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for detecting markings, thereby enabling full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m