Kappsage Stromab TR500+Matrix 6000

Stromab TR500+Matrix 6000

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully Automatic Optimizing Cross-Cut Saw with Full Optimization TR-500 MATRIX-6000 - Main motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 s - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE compliant - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction outlets: 4 x Ø 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl Itodpfxov A Htde Al Nsf - Extraction air velocity at the nozzle center: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and servomotor-based measurement - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell workpiece length measurement - Photocell defect detection - Fluorescent chalk marking - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12” touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization modes (maximum length, sequence, and workpiece sequence) - 3 optimization modes (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing variable length material with single or bundle feeding - 6 optimization modes (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for detecting markings, thereby enabling full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Stanje: zelo dobro (rabljeno), Kataloška številka 6726 TEHNIČNI PODATKI - Vhod lijaka za polnjenje: 280x300mm - Izhod za zdrobljen les: premer 310mm - Delovna širina rotorja: 340mm - Glavni motor: 22kW - Število nožev: 6 kosov - Dimenzije (d/š/v): 1300x1150x1680mm - Teža: 720kg PREDNOSTI Isdpfx Aloignt Ue Njtf – Zelo dobro stanje – Rabljen sekalnik Neto cena: 19.900 PLN Neto cena: 4.740 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (pri večjih valutnih nihanjih se cena lahko spremeni)

Stanje: novo, Bester Preis: 4499 EUR (EXW Jonava, Litauen) Abmessungen des Schiebeschlittens: 2200 x 375 mm Max. Schnittlänge: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl Hauptsäge: 4.500 / 6.000 min⁻¹ Hauptsägewelle Durchmesser: 30 mm Sägeblatt schwenkbar: 0–45° Sägenhub, Heben und Senken mit elektrischer Steuerung Hauptmotor: 5,5 kW Vorschnittsägeblatt Durchmesser: 120 mm Itsdpednxydofx Al Nsf Drehzahl Vorschnittsäge: 7.000–8.000 min⁻¹ Vorschnittsägewelle Durchmesser: 20 mm Vorschnittmotor: 1,1 kW Gewicht: 700 kg * Beim Einsatz eines 400-mm-Sägeblatts muss das kleinere Blatt entfernt werden. * Reduzierte Sägeblätter dürfen nur mit maximal 350 mm Hauptschutz verwendet werden.

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 265864, premer struženja: 350 mm, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 35 obr/min, potovalna razdalja osi X: 195 mm, pomik po osi Z: 560 mm, moč vretenovega motorja: 15 W, hitrost pomika os X: 30 m/min, hitrost podajanja os Z: 33 m/min, vrtilni moment: 233 Nm, razdalja od središča mize do nosu vretena: 687 mm, Oprema: dokumentacija / priročnik, Mazatrol Smart krmilnik. Itjdpevfm H Aofx Al Njf Hitrost vretena: 5000 vrtljajev na minuto. Pomik X/Z: 195 mm/560 mm. Opremljen s premerom 215 mm. 3-čeljustna pogonska vpenjalna glava. 12-postajni revolver. Konjiček. Merilna sonda za orodje. Lovilec obdelovancev.

Stanje: rabljeno, Leto izdelave: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of Manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with corner transfer Iedpfxju Afu Rs Al Netf Consisting of: 1. Infeed conveyor, length 3,050 mm 2. Open space for sanding machine (optional) 3. Automatic spray machine VEN SPRAY PERFECT, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. Jet dryer VEN DRY AIR JET, length 4,160 mm 6. 180-degree corner transfer with jet dryer 7. Supply air system for corner transfer, 25,000 m³/h 8. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 9. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 10. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 11. 3D-UV Dryer, VEN DRY UV, GA + HG 12. Discharge area, belt of UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Finger Jointing Line for Cross-Sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL – Tilt Destacking Station - SH/4t - 1.75x1.75x6.00 m - 4 t – minimum length 2.50 m, semi-automatic singling of the package. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions: 1.75 x 1.75 x 6.00 m. Maximum stack load: 4 t Minimum wood length: 2.5 m 2. HOWIAL – Lamella Singling Unit VE 1 to cross-cut saw. With pneumatically controlled tongues for sorting material marked for defects, placing it onto the underlying roller conveyor. 3. HOWIAL – Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and recording system for automatic moisture detection and monitoring using the resistance method in cycle measurement mode. 4. Gann DMT-8 Digital wood moisture measurement, control, and recording system for automatic moisture detection and monitoring using the electrical resistance principle in cycle mode. Installed in a large control cabinet with inkjet printer. 5. HOWIAL – Cross-Cut Saw AS-30 B Pneumatically operated under-table cross-cut saw with two automatic feed units and automatic cross-cutting. Control by special photo cell for detecting fluorescent line marks. Automated waste removal possible. Saw motor power: 7.5 kW Saw blade diameter: 700 mm Feed drive: approx. 2 x 1.5 kW Air pressure: 8 bar Max. feed speed: approx. 60 m/min 6. HOWIAL – Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width: 350 mm Belt length: 2000 mm Belt speed: 0.4 m/s 7. HOWIAL – Double Roller Conveyor RO-2, 6.00 m long Isdpfx Aji Ezx Del Netf Incl. cross transport. Finger jointing automation feeding. Driven by round belt, all rollers are powered. Cross transfer via chain conveyor. Eject ± moisture to the right. Adjustable transport speed up to 100 m/min. Length: approx. 6.00 m Roller width: approx. 400 mm Diameter: 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Feed-in lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Press force: 5 - 22 t Spindle diameter: 50 mm Finger profile: 15/15 Spindle speed: approx. 6000 rpm Total electrical connected load: approx. 62 kW Machine weight: approx. 9 t Gluing system: OEST comb application system for PU Modern Telemechanique PLC (SPS) Control 9. HOWIAL – Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical data: Height: 920 mm Length: approx. 12,000 mm 10. Safety Guarding Fences including safety switch 11. Finger Joint Test Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Adjustable support distances, built-in measuring scale, automatic calculation of support distances in software. Fully automatic test process triggered by mouse click on PC (not included). Alternatively, test process can be triggered by push-button on front panel. Connection to any standard PC or laptop (Win 2000/XP) via included RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. compression force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISMANTLING

Stanje: rabljeno, Skupna višina 6500 mm, tloris 2000 x 2000 mm, postavitev na prostem. Kompaktna filtrirna serija, model PKFP – 1 element – 1,92 x 1,92. Filtrirni sistem z stresanjem, nadtlakovno delovanje. Dolžina filtrirne vreče 2500 mm, premer 180 mm, filtrirna površina 105 m². 2 ventilatorja za surovi zrak, 2 cevi (premer 300 mm). 1 x ventilator KT 300, moč 15 kW, zmogljivost 6361 m³/h, letnik 1999. 1 x ventilator S 25 / 300, moč 7,5 kW, zmogljivost 7400 m³/h, letnik 1993. 1 x transportni ventilator 6,1 kW, zmogljivost 57 m³/min, letnik 1996. Skupen volumenski pretok cca 14.000 m³/h. Briketirni stroj Höcker Polytechnik tip BrikStar C 3 - 12.1225, motor 3,0 kW, premer briket 65 mm okrogle, kapaciteta cca 40-45 kg/h, odvisno od specifične teže materiala. Lokacija skladišča: Nattheim. Itjdpfevviytjx Al Nef

Leto izdelave: 2023, stanje: novo, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel + aluminum Overall dimensions: 3350 x 2200 x 1300 mm Working area: 3100 x 1520 x 140 mm XY Axis Drive, dual-sided gantry: 4 Nm stepper motors with gear ratios, precision class 8 rack and pinion Z Axis Drive: stepper motor with ball screw Travel speed: up to 25 m/min Z-Axis Control System: THC MyPlasm system Collision system protecting the torch from damage Linear guides: TBI Automatic material detection system Power supply: 240V Permissible load: 1700 kg Net weight: 1200 kg INCLUDED IN THE PACKAGE: - Control panel - Water table - Replaceable grate - Control software (available in German, English, and Polish) - CE declaration of conformity - Technical Documentation (DTR) - Warranty Optional: Selection of a suitable Hypertherm plasma source tailored to individual company requirements. Iodpfsh Rabnsx Al Netf

Leto izdelave: 1988, stanje: potreben popravila (rabljeno), Mehanizacija pred skobeljni stroj za KVH/BSH – za dolžine do približno 13 m. Idealna KVH+BSH linija pred skobeljni stroj. Vzdolžno razstavljanje - enojno sortiranje. 4 krožne žage za prečno razrezovanje, nastavljive po širini. Prečni razrez: 180 x 220 mm, 150 x 300 mm. Zadostuje ena upravljalna oseba. Isdsvbtpjpfx Al Notf

Stanje: rabljeno, SPE Renergi nizkotemperaturni sušilnik. Renergi sušilnik se uporablja za sušenje žagovine in drugih materialov za proizvodnjo biogoriv. Sušilnik lahko suši žagovino, lubje ali lesne sekance, zmanjšujoč vsebnost vlage približno s 50 % na približno 10 %. Ta nizkotemperaturni sušilnik uporablja toplo (ali vročo) vodo s priporočeno temperaturo od 65 °C naprej. Najvišja temperatura vode: 110 °C. Varnost napajanja: Sušilnik sme biti priključen izključno na trifazno omrežje 3x400 V AC (630 A), 50/60 Hz, z ločenim zaščitnim ozemljitvenim vodnikom. Podatki o napajanju: • Napetost: 400 V AC, trifazno • Priporočene varovalke: največ 3x630 A • Tipična poraba energije: 200 kW Dimenzije sušilnika so cca 17,4 x 5,7 m, višina 10,7 m. Potrebna talna površina znaša približno 21,4 x 8,0 m. Višina stropa naj bo vsaj 15 m (oziroma 4 m nad vrhom dovoda materiala). Dovod zraka: Za obratovanje naprave je potreben dovod vsaj 24 kg/s svežega zraka (kar ustreza 20 nm3/s ali 72.000 nm3/h). Pretok zraka: največ 200 l/min Tlak zraka: najmanj 4,5 bar, priporočljivo 6,0–8,0 bar Vodni dovod: topla voda, pretok 32 dm3/s Tlak vode: najmanj 1,5 bar, največ 6,0 bar Obratovalno temperaturno območje: • Temperatura dovedenega zraka: -20 °C do +50 °C • Relativna vlažnost: 0 % do 60 % Surovina/material: • Relativna vlažnost: 45–55 % (teža) • Zahtevana vlažnost po sušenju: 8–15 % Zmogljivost: • Dvo-celični sušilnik širine 4 m lahko praviloma obdela 2.400 kg materiala z vsebnostjo vlage 55 % v vsaki seriji • Sušilnik lahko posuši 6.000 kg surovine (od 55 % na 10 % vode) v eni uri SRE sušilnik je izdelan skladno z evropskimi direktivami in ustreza zahtevam: Ijdpewp Rqfsfx Al Nstf • Direktiva o strojih 2006/42/ES • LVD 2006/95/ES • EMC 2004/108/ES Sušilnik se nahaja v občini Straupe, okrožje Cēsis, LV-4152, Latvija. Ogled je možen ob delavnikih od 8.00 do 17.00, predhodno po dogovoru. Sušilnik je že demontiran. Na voljo so vsi električni shematski prikazi, navodila za uporabo in servisna dokumentacija. Po dogovoru zagotovimo kontakt z uporabnikom tovrstnega sušilnika za strokovno svetovanje. Cena: 20.000,00 EUR (DDV ni vključen)