Optimizacija žage za prečni razrez

Dimter OptiCut 350-4 R

Wood processing dimensions:

Infeed lengths min/max: 500 - 6500 mm
Full optimization up to max: 1500 mm
Infeed widths min/max: 40 - 300 mm
Infeed thicknesses min/max: 15 - 120 mm
Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm
Fixed lengths after saw min: 510 – 2800 mm

Special application:
Cutting blocks, min/max length: 100 – 200 mm
(Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes)

Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m).
Thickness tolerance: +/- 3 mm
Wood curvature in all directions: max. 10 mm per meter length

Wood species: Softwood or hardwood

System performance:
Feed speed, steplessly adjustable up to max. 230 m/min
Cutting cycle: 0.6 – 1 s
To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied.

Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base)
Sorting working height: 2000 mm

Connection data:
Total electrical connection load: approx. 18 kW
Fedsw Sy T Hspfx Afljft
Operating voltage: 380 Volt / 50 Hz
Voltage fluctuations max. 5 %
Air consumption: approx. 1200 NL/min
Operating pressure: approx. 8 bar
Extraction speed: approx. 30 m/s

Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B

POSITION OVERVIEW:

Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge
Pos. 2: Support roller without drive, front-facing sheets table for easier loading
Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings
Pos. 4: Automatic, contactless width measurement
Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections
Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control
Available for processing:
- max. 16 product groups
- max. 8 grades per product group
- max. 200 fixed lengths per product group
Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm
Pos. 7: 2 ejectors mounted on outfeed conveyor

Location: Nattheim

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.