Prečna žaga pod mizo

SALVAMAC Legend 500

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Semi-automatic under-table crosscut saw, including: 2-meter roller conveyor to the left of the saw with 1 manual folding stop and 1 pneumatic folding stop 2-meter roller conveyor to the right of the saw General Technical Data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm (Z = 108) Nodpfx Aasw Rcibececn Rotational speed: 2,800 rpm Compressed air: max. 8 bar Extraction connection: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Standard Equipment: Automatic safety and hold-down device Two-hand control and safety shield Carbide-tipped saw blade SAFE The ergonomically positioned two-hand control and the safety guard around the saw blade ensure absolutely safe operation. Safe, protected, and reliable! SOLID Legend saws are designed and built to operate under tough conditions and with hardwood. The structure consists of thick-walled, reinforced, fully painted steel. Solid, compact, and resistant. FAST Compared to a pull or radial arm saw, the LEGEND guides the saw blade pneumatically and extremely quickly through the workpiece. The physical strain on the operator is therefore significantly reduced.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 620 h, Funkcionalnost: popolnoma funkcionalen, Kaeser Aircenter SM13-11 Screw Compressor (2021) Manufacturer: Kaeser Model: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Operating hours: 1,356 h Load hours: 606 h Next service at: 2,825 h Technical specifications Pressure: 11 bar Effective delivery rate: 1.08 m³/min Rated motor power: 7.5 kW Motor protection class: IP 54 Power supply: 400 V / 3 phase / 50 Hz Dimensions (W x D x H): 630 x 1200 x 1716 mm Weight: 400 kg Compressed air receiver: 270 l Compressed air connection: G 3/4 Sound pressure level: 64 dB(A) Refrigeration dryer Power consumption: 0.26 kW Pressure dew point: 3 °C Pressure drop: 0.2 bar Refrigerant: R 134a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) Ncedpfx Aoxnnd Reacjn – 5 m power cable with 32A plug

Stanje: novo, Semi-automatic crosscut saw SALVAMAC LEGEND 500 Max. cutting height: 125 mm Introductory special price Includes: - Semi-automatic crosscut saw SALVAMAC LEGEND 500 Max. cutting height: 125 mm SAFE - SOLID - FAST The compact, simple, robust, and innovative machine ensures maximum safety, flexibility, and reliability. Standard equipment: - Automatic protection and clamping device - Ergonomically positioned two-hand controls - Fixed safety guard - Incl. carbide-tipped saw blade 500 mm, Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction port: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between two stops (optional): 60 mm Note: Base price without roller conveyors. When installing the saw, at least 1 m on the left and 1 m on the right of the saw must be equipped with a support table or roller conveyor. Includes: - Roller conveyor without scale, right side, per meter: Roller conveyor, 320 mm width, with 100 mm stop fence and galvanized rollers, Load capacity: 230 kg, Roller diameter: 60 mm, spacing: 250 mm, Right side of the saw. Price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Includes: - Roller conveyor with stop fence and scale, left side, per meter: Roller conveyor, 320 mm width, with 100 mm stop fence and galvanized rollers, Load capacity: 230 kg, Roller diameter: 60 mm, spacing: 250 mm, Left side of the saw. Price per meter Note: The stop fence must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Includes: - Pneumatically swiveling stop, 200 mm length Nodevtrkispfx Aacscn - new display/exhibition machine -

Stanje: novo, Leto izdelave: 2025, The most valued solution. Ncedeuii Rgopfx Aacjn The Legend_500 features a fully painted, heavy-duty reinforced steel construction. With a 500 mm diameter saw blade, a 5.5 kW motor, and a speed of 2800 RPM, it is the ideal machine for users processing wood up to 125 mm thick and 310 mm wide (optionally up to 375 mm).

Stanje: rabljeno, Leto izdelave: 2000, Število vreten: 5 kos Delovna širina: 230 mm Višina obdelave: 160 mm Pogonski motor podajalnika: 4 kW Podajalna hitrost: 5–24 m/min. Stružnica in profilirka Weinig Unimat 23E za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom za samodejno nastavitev in utornim ležiščem (opcijsko brez utornega ležišča) za kratke in ukrivljene obdelovance ter z dolgim vijačnim vodilom. Opcijsko: Predelava na klasično gladko mizo, na zahtevo. Vreteno 1: Spodaj / 40 mm / 5,5 kW Vreteno 2: Desno / 40 mm / 7,5 kW Vreteno 3: Levo / 40 mm / Skupni motor z vretenom 2 Njdpfx Aewztw Sjacjcn Vreteno 4: Zgoraj / 40 mm / 7,5 kW Vreteno 5: Spodaj / 40 mm / 5,5 kW

Stanje: rabljeno, Leto izdelave: 2025, New display machine! Partnership Edition, incl.: - 1 meter roller conveyor to the right of the saw, with galvanized rollers. - 1 meter roller conveyor to the left of the saw, with galvanized rollers. Nedow Tfzlopfx Aacecn - 1 pneumatically swiveling stop, 200 mm long, with control switch on the saw frame. SAFE - SOLID - FAST The compact, simple, robust, and innovative machine guarantees maximum safety, flexibility, and reliability. Standard equipment: - Automatic guard and pressure device - Ergonomically positioned two-hand control - Fixed protective shield Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 350 mm. Includes rear 100 mm high stop ruler with scale. - 1 carbide tipped saw blade, 500 mm, Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Speed: 2,800 rpm Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction ports: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3-phase Table height: 900 mm +/- 20 mm Minimum distance between stop and saw blade: 70 mm Minimum distance between two stops: 60 mm Location:

Stanje: novo, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW Speed: 2,800 rpm Compressed air connection: 6-8 bar Working height: 900 +/- 20 mm Dimensions (L/W/H): 10,645 x 1,000 x 1,300 mm SALVAMAC COMBO 500 – the semi-automatic crosscut saw with SALVASTOP 100 - electronic length stop/pusher ----- Item 1: Legend 500 Under-table Crosscut Saw ----- Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, h max. 100 mm. The structure is built entirely from thick-walled, fully reinforced and painted steel. Solid floor mounting system with flanged steel feet for mounting holes. Ncsdpfxovu Hd Tj Aacen Two-hand safety control for cutting, ergonomically positioned. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic regulator. Maximum balance and durability system. Shock-absorbing system. Independent pneumatic adjustment options to suit different types of processing. Durable and easy-to-replace saw blade positioning bar. HM carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electropneumatic control. Clamping movement system using innovative double dust-protected ball bearings and automatic lubrication system. CE-compliant electrical system. CE versions must be standard equipped with infeed and outfeed support tables at least 1 meter long. Technical data: ----- Max. saw cross-section mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade speed: 2,800 rpm Air consumption per cycle: 7 Nl Extraction connection: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400 V / 50 Hz, 3-phase Table height: 900 mm ± 20 mm Color: RAL 7035 - RAL 1007 Item 2: Salvastop 100 electronic length stop ----- - Working modes: 2 modes 1 x Stop (length stop moves to set length) 1 x Pusher (sequential processing of multiple lengths at the press of a button) - With servo drive - Pusher speed: up to 60 m/min - Pusher length: 600 mm - With 7'' touch display - Maximum workpiece weight for pushing: up to 100 kg - USB port COMBO_500 - 6400/7000 - Roller conveyor with guide, right side of the saw. Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, roller spacing 250 mm, width 320 mm, 3 m long. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demo machine additionally equipped with: UP & DOWN FRONT GUARD Movable, not fixed, front guard. The guard lifts during cutting to ensure safe working conditions. Loading and unloading wood is simplified by the lowered guard. The system features a specially secured pneumatic linear guide system using top-quality cutting-edge technology. SOFTWARE INTEGRATION FILES Preparation f...

Stanje: zelo dobro (rabljeno), Stehle S820 (avtomatski brusilnik za ravne rezila). Prosimo, preverite tudi v vsiljeni pošti (junk mail), če v roku 24 ur po oddanem povpraševanju ne prejmete odgovora!!! Specifikacije: • Največja širina orodja: 330 mm • Premer orodja – glave za skobljanje (min-max noževne glave): 120 - 230 mm • Hitrost brusilnega kamna: 2850 / 5750 obratov/min • Možno brušenje od 2 do 12 nožev na glavo z indeksnim kolescem • Priložene indeksne plošče za brušenje 4, 6, 8, 10 in 12 nožev • Pogon brusilnega kamna: 1,3 kW Ncodpfx Aasq Dzkuscen • Kot odmika: 10 - 35° • Rezervoar za hladilno tekočino: 125 L • Motor črpalke za hladilno tekočino: 0,28 kW • Priključna moč, skupno: 2 kW Prosimo, preverite tudi v vsiljeni pošti (junk mail), če v roku 24 ur po oddanem povpraševanju ne prejmete odgovora!!!

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60° - 90° - 30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Ncsdpoizkhvefx Aacen Extraction port: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Stanje: novo, Popolnoma avtomatski vgradni stroj za stabilno in natančno zlaganje palet. PSR je uporabniku prijazen in ga je mogoče enostavno nastaviti za različne dimenzije palet. Stroj varno in natančno zloži palete v stabilne sklade, pripravljene za nakladanje ali skladiščenje. PSR se uporablja na koncu proizvodne linije. Kako deluje? PSR dvigne sklad s pomočjo dveh dvižnih rok, medtem ko verižni transporter pripelje novo paleto ali deščico pod sklad. Nastavitve dimenzij palet lahko enostavno prilagajate s pritiskom na gumb. Mychrome ponuja različno dodatno opremo, ki jo je mogoče enostavno priklopiti na obstoječe stroje, da ustvarite daljšo linijo z več avtomatiziranimi fazami. Možnost prilagoditve zasnove in dimenzij palet ostaja tudi z dodatno opremo. Dimenzije deščic / palet: Ncjdpjwduv Iefx Aacon Min / max dolžina: 600 mm - 1 600 mm Min / max širina: 600 mm - 1 600 mm Tehnične specifikacije: Število operaterjev | 0 Dolžina | 3,3 m Širina | 2,5 m (brez dostopne lestve) Višina | 2,3 m Moč | 3 kW, 3x400 V+N Pnevmatski sistem | 7 bar, suh zrak: 200 l/min Kapaciteta stroja | 4 palete ali deščice / min Standardna oprema | Motorizirane nastavitve