DVOJNI PROFILNI STROJ - SCM

CELASCHI (SCM Group) Celaschi P 30

Stanje: novo, Table length 2000 mm Table width 1000 mm Lifting height 400 - 1010 mm Iijdov Htkdspfx Amuog Load capacity 300 kg Machine weight approx. 220 kg Description: - Sturdy support frame for worktops - Easy, back-friendly operation thanks to height adjustment via foot pedal - Optimum maneuverability with 4 swivel castors – 2 with locking brakes - Beech multiplex board 2,000 x 1,000 x 30 mm - 5-year warranty

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line For all inquiries, please contact 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Iijdpfx Asilqvromusg Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Max. working width: 1000 mm, feed rate: 5–20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, complete with documentation, regularly maintained. Iiedpfx Aei E Trpsmusg

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Isdpfx Aefi Tg Hemujig Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: rabljeno, Stroj za izdelavo pelet Münch, tip RMP 660, za proizvodnjo lesenih pelet in pelet iz biomase iz žagovine, lesnih sekancev in drugih organskih ostankov. Stroj je primeren za industrijsko proizvodnjo pelet z visoko tlačilno močjo in konstantno kakovostjo pelet. Idealno za podjetja za obdelavo lesa, žage in obrate za predelavo biomase. Tehnični podatki: - Premer sita: 6 mm - Motor: 2 x 90 kW - Notranji premer matrice: približno 660 mm - Število tlačnih valjev: 2 Iodpfx Amszryyrjusig - Tlačilna moč: do približno 3–5 t/h

Stanje: novo, Abmessungen: B2500 / L5250 / H2100 Iodpfeu E Ezpex Amusig

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Iijdsvwbp Aepfx Amujg

Stanje: rabljeno, Leto izdelave: 1997, Linija 3 stroji Stenner MHS9 iz leta 1997 Isdpfx Ajw Nrhkjmuoig

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 114550, delovna širina: 230 mm, višina skobljanja: 120 mm, število vreten: 6, Planing and Moulding Machine Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control as well as the proven PowerLock quick-change system, and additionally features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment: - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm Iodpox Sxfvofx Amusig 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock - Working width: 20 – 230 mm - Working height: 8 – 120 mm - Worktable: 2.5 m (including jointer fence) - Top pressure rollers, spring-loaded - Side pressure pneumatically actuated - Frequency-controlled feed unit with brake, feed speed: 5 – 30 m/min - Reduced distance between feed rollers at feed section (400 mm) - Additional feed rollers and reduced roller spacing - Durofer steel roller, self-cleaning - Infeed roller before the 1st bottom tool, pneumatically actuated - Siemens/ Powercom control system The machine is in very good, well-maintained condition. It has been professionally operated, serviced regularly, and will remain in operation until 17 December 2026. Inspection of the running machine is possible at any time by appointment. The tools for the 6 spindles are included in the price. Dismantling and loading will be invoiced separately to the buyer. The technical description and layout of the machine can be found in the documents.

Stanje: zelo dobro (rabljeno), Štiristranska skobeljna Weinig Hydromat 23C Delovna širina: 230 mm Delovna višina: 160 mm Število vreten: 7 Razporeditev vreten: 1. Spodaj 15 kW 2. Desno 7,5 kW 3. Levo 7,5 kW 4. Zgoraj 15 kW 5. Spodaj 30 kW (večlistna žaga) 6. Spodaj 7,5 kW (hidro podpora) 7. Zgoraj 7,5 kW (hidro podpora) Hitrost vrtenja vreten: 6000 o./min Premer vretena: 50 mm 4 pogonski valji v delovni mizi Hitrost pomika nastavljiva s frekvenčnikom do 36 m/min Iodjxlcufepfx Amueig Pomik poganja kardanska gred Pnevmatski pritisni elementi Tehnična dokumentacija