Stromab Tr 350 nakup rabljenega (57)

Stanje: rabljeno, Stromab TR350 prečna žaga IDC000098 - kompletna s filtrom - z valjčnimi transporterji Dcedpfx Aeu Dhzijpljg

Stanje: dober (rabljeno), Leto izdelave: 2003, premer žaginega lista: 450 mm, Nice under-table mitre saw with two-hand operation and foot switch Saw blade diameter: 450 mm Max. cutting height: 16 cm Dcedjwx R Ivopfx Apleg With 2 roller conveyors

Stanje: rabljeno, Leto izdelave: 2016, skupna višina: 1.600 mm, skupna dolžina: 14.100 mm, skupna širina: 1.600 mm, Barva: Siva Teža: 2.500 kg - Letnik: 2016 - Dokumentacija na voljo: Da - CE-oznaka prisotna: Da - CE-potrdilo na voljo: Ne - Serijska številka: 6237 - Napetost [V]: 415 - Poraba toka [A]: 20 - Transportne mere: 14100 mm x 1600 mm x 1600 mm (d x š x v) - Transportna teža [kg]: 2500 kg - Število transportnih paketov [kos]: 4 Djdpfswnh N Nox Aplscg Finančne informacije DDV: Navedena cena je brez DDV DDV/obdavčitev po razliki: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vso industrijsko opremo. Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2022, skupna višina: 1.700 mm, skupna dolžina: 10.000 mm, skupna širina: 1.800 mm, Barva: Siva Teža: 1.100 kg Cena: Na zahtevo - Leto izdelave: 2022 - Dokumentacija na voljo: Ne - CE-oznaka prisotna: Da - CE-certifikat prisoten: Ne - Serijska številka: 8737 - Maks. dolžina žaginega lista [mm]: 6.000 - Maks. širina žage [mm]: 300 - Min. premer žaginega lista [mm]: 490 - Maks. premer žaginega lista [mm]: 500 Dcedpfjyna Ensx Apleg - Premer lista na osi [mm]: 30 - Dolžina dovajalne mize [mm]: 7.000 - Dolžina izhodne mize [mm]: 2.000 - Opcije: Avtomatski podajalni sistem - Napetost [V]: 400 - Poraba toka [A]: 20 - Varovalka [A]: 32 - Transportne mere: 10.000 mm x 1.800 mm x 1.700 mm (d x š x v) - Transportna teža [kg]: 1.100 kg - Število transportnih paketov: 3 Finančne informacije DDV: Navedena cena je brez DDV DDV/obračun na razliko: DDV je odbiten za podjetja Dostava in menjava sta možni kadarkoli za vse iz industrijskega sektorja Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2005, skupna višina: 1.750 mm, skupna dolžina: 1.350 mm, skupna širina: 1.350 mm, Barva: Siva Optimirna čelilna žaga Stromab TR 500 Matrix 4 4000 Leto izdelave: 2005 Moč motorja: 10 KM Dcsdpfxswq U Dxo Aplsg Avtomatski potisni sistem Inkjet tiskalnik - Leto izdelave: 2005 - Dokumentacija na voljo: Ne - CE certifikat: Ne - Serijska številka: 250143 - Glavna moč motorja [kW]: 7,5 - Najv. širina reza [mm]: 375 - Premer žaginega lista na osi [mm]: 30 - Dolžina dovajalne mize [mm]: 4300 - Dolžina izhodne mize [mm]: 2000 - Transportne mere: 1350mm x 1350mm x 1750mm (d x š x v) - Število transportnih paketov: 3 Finančne informacije Davek na dodano vrednost: Cena je navedena brez DDV DDV/obdavčitev: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijskega področja Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2013, Barva: Siva Dodpfjyvf Epsx Aplocg Teža: 2.000 kg Cena: Na zahtevo - Posebnosti: - Opis: Naprava trenutno ne deluje, morda programska težava - Leto izdelave: 2013 - Dokumentacija na voljo: Ne - CE oznaka prisotna: Da - CE certifikat prisoten: Ne - Serijska številka: 4919 - Min. premer žaginega lista [mm]: 440 - Max. premer žaginega lista [mm]: 450 - Dovodni dolžina mize [mm]: 4700 - Odtok dolžina mize [mm]: 2000 - Opcije: Avtomatski podajalni sistem - Hitrost podajanja: Avtomatska - Napetost [V]: 400 - Poraba toka [A]: 13 - Varovalka [A]: 20 - Transportna teža [kg]: 2000 kg - Transportni paketi [kos]: 3 Finančne informacije DDV: Cena je navedena brez DDV DDV/obračun po razliki: DDV je odbiten za podjetja Dostava in odkup sta možna kadarkoli za vso industrijsko opremo Yorick Diebels

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 241306, premer žaginega lista: 500 mm, največja višina reza: 170 mm, največja širina rezanja: 395 mm, moč: 7,5 kW (10,20 KM), premer vrtine: 30 mm, TEHNIČNI PODATKI Maks. širina reza: 395 mm Maks. višina reza: 170 mm Min. premer žaginega lista: 490 mm Maks. premer žaginega lista: 500 mm Premer izvrtine žaginega lista: 30 mm Dolžina dovajalne mize: 5.640 mm Dolžina izhodne mize: 1.180 mm Hitrost podajanja: Avtomatska PODROBNOSTI STROJA Napetost: 400 V Poraba toka: 16,5 A Dcedpfjy Akvnsx Apljg Varovalka: 32 A Moč: 7,5 kW Transportna teža: 800 kg Število transportnih paketov: 3 OPREMA Avtomatski podajalni sistem

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 1377, STROMAB TR 500 PNEUMATIC CROSSCUT SAW – CE STANDARD – USED Dsdpfx Apet U Izpjlecg - Equipped with TIGERSTOP electronic positioning stop, 4000mm - Infeed roller table, 4500mm - Outfeed roller table, 4500mm - Blade diameter: 500 mm - Maximum cutting capacity: 360 mm (width) x 60 mm (height), 135 mm (height) x 280 mm (width) - Motor: 10 hp - 415 volt - Serial no.: 1377 - Year: 2007

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, maksimalna višina reza 160 mm maksimalna širina reza 600 mm diameter lista 600 mm minimalni premer lista 590 mm hitrost vrtenja lista 2800 obr./min moč motorja 9,2 kW leto izdelave 2006 CE oznaka Dcodpfx Ajyu Shnopljg

Stanje: rabljeno, Leto izdelave: 2020, premer žaginega lista: 600 mm, največja višina reza: 200 mm, skupna dolžina: 8.000 mm, skupna širina: 2.000 mm, Prečna žaga s potiskačem, opremljena s potiskačem dolžine 4 metre, višina reza: od 30 do 200 mm, širina reza: od 300 do 580 mm, zmogljivost potiskača: 350 kg. Dcjdpoyzrb Aefx Apljg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, največja višina reza: 160 mm, maksimalna višina reza 160 mm maksimalna širina reza 610 mm premer žagnega lista 600 mm minimalni premer žagnega lista 590 mm hitrost vrtenja žage 2800 obr./min moč motorja 7,5 kW 2 prisloni leto izdelave 2001 Dedpeymnvlsfx Apljcg teža pribl. 700 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Total power requirement 10.2 kW Fully-automated optimizing cross-cut saw with full optimization TR-600 MATRIX-6000 - Motor drive power 9.2 kW - Saw blade diameter 600 x 30 mm Z=60 - Cutting capacity according to cutting diagram - Cutting capacity 150 x 365 mm - Cutting capacity 130 x 440 mm - Cutting capacity 100 x 530 mm - Cutting capacity 60 x 580 mm - Cutting capacity 30 x 610 mm - Cutting cycle 6 seconds - Hydraulic cross-cut unit - Work table inclined by 8° - Minimum workpiece thickness 10 mm - Safety cover over cross-cutting unit - CE standard - Weight 1500 kg Electrical specifications: Djdpfxev A Htkj Aplocg - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Extraction ports 4 x diameter 100 mm - Extraction capacity 2400 m³/h - Air speed at center of extraction port approx. 25–35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Max. pusher speed 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, length measurement via servomotor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination 8° - Positioning tolerance +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 px) - Create cutting lists directly on the machine control - Up to 1,000 cutting lists with 10 dimensions each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard with USB and Ethernet interface - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing variable-length material, for single or bundle feeding. - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creating cutting lists on PC €360.00 - Outfeed table €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully Automatic Optimizing Cross-Cut Saw with Full Optimization TR-500 MATRIX-6000 - Main motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 s - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE compliant - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction outlets: 4 x Ø 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air velocity at the nozzle center: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and servomotor-based measurement - Pneumatic lifting of the pusher at cycle end and overhead return Dcedpfsv A Htdjx Apljg - Photocell workpiece length measurement - Photocell defect detection - Fluorescent chalk marking - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12” touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization modes (maximum length, sequence, and workpiece sequence) - 3 optimization modes (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing variable length material with single or bundle feeding - 6 optimization modes (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for detecting markings, thereby enabling full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 900 kg Total power requirement: 5 kW Fully optimizing automatic crosscut saw TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle: 4 seconds - Pneumatic crosscutting unit - Inclined worktable at 8° - Minimum workpiece thickness: 10 mm - Safety cover over crosscutting unit - CE compliant - Weight: 900 kg Electrical connection: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air velocity at extraction port center: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and mass measuring via servo motor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - Three optimization options (maximum length, sequence, part sequence) - Three optimization options (volume, minimal waste, priority) - USB and Ethernet ports as standard - Includes OPTI function for automatic measurement of the workpiece to be cut. Ideal solution for processing material with varying lengths, with single or bundle feeding. Six optimization options (maximum length, sequence, part sequence, volume, minimal waste, priority). - Includes OPTI PLUS function for detection of markings, ensuring full optimization and removal of knots and defects. - Marking with chalk Dsdpfev A Hr Tsx Aplecg Options: - Pneumatic side clamp: €850.00 - Creating cutting lists via PC: €360.00 - Outfeed table: €360.00/m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, največja višina reza: 160 mm, največja širina rezanja: 600 mm, premer žaginega lista: 600 mm, skupna masa: 550 kg, premer diska: 600 mm, premer odprtine diska: 30 mm, Prečna žaga - HIDRAVLIČNA STROMAB TR 600 Motor 7,5 kW, 380 V, 16,5 A Teža: 550 kg Dedpfoxz S Dnjx Aplocg V dobrem delovnem stanju, pripravljena za proizvodnjo

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, največja širina rezanja: 610 mm, premer žaginega lista: 600 mm, - leto izdelave 1997 - dve pnevmatski zapahi TEHNIČNI PARAMETRI: - premer žaginega lista: 600 mm - maks. širina reza: 610 mm (pri višini elementa 30 mm) - maks. višina reza: 160 mm (pri širini elementa 380 mm) - moč motorja: 7,5 kW - izhod za odvod žagovine: 2 x 100 mm - dve pnevmatski zapahi za rezanje na določeno dolžino - hidravlično vpenjanje elementa in pomik žaginega lista - brezstopenjska regulacija hitrosti rezanja - dovajalna miza: 1000 mm / 470 mm D-90 mm - odjemalna miza: 1500 mm / 500 mm D-60 mm - premer vretena: 30 mm - hitrost vrtenja lista: 2800 obr/min Djdpox Ekmrofx Aplscg Transportne dimenzije - 280x165x140 cm - teža 600 kg

Stanje: rabljeno, STROMAB TR 500 – Under-table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideally suited for precise and efficient cutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 — Technical Specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic Dedpfx Aoxiza Ueplocg • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & Delivery The machine is in excellent technical condition and ready for immediate use. • Inspection possible at any time • Secure palletised shipping by freight carrier available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to changes and errors.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 1.234 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 7.000 mm, dolžina pomika po osi Y: 600 mm, dolžina podajanja os Z: 250 mm, hitrost pomika os X: 80 m/min, skupna dolžina: 8.000 mm, skupna višina: 1.800 mm, skupna masa: 2.000 kg, premer žaginega lista: 500 mm, premer diska: 500 mm, dolžina mize: 7.000 mm, Oprema: USB priključek, Na prodajo ponujam optimirko STROMAB MATRIX TR 500 v zelo dobrem tehničnem stanju, uporabljeno v manjši proizvodni delavnici, predvsem za razrez konstrukcijskega lesa. Uporabljena za izdelavo montažnih hiš. Stroj je popolnoma delujoč in redno servisiran. Pripravljen za uporabo brez dodatnih investicij. Prodaja na račun z DDV. MOŽNOST PREIZKUSA NA LOKACIJI Dcedpfswp Rvhex Aplsg CENA po dogovoru.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: MR006589, Visokokakovostni, hitri čelilni žagalni stroj z avtomatskim potisnim sistemom in programsko opremo za optimizacijo. Stroj je opremljen s funkcijo zaznavanja napak v materialu z uporabo krednih črt in vključuje naslednje opcije: - Pnevmatski pritisni cilinder na desni strani žage - Pnevmatski pritisni cilinder na levi strani žage Dsdpfsy I N Akex Aplocg - Paket 'OPTI' z zaznavanjem dolžine materiala in dodatnimi optimizacijskimi kriteriji - Paket 'OPTI PLUS' s fotocelico za prepoznavanje napak v materialu - Stroj z izhodno mizo (na meter) - Tiskalnik etiket - MO9416XLTD Tehnične specifikacije: - Kot reza: 90 ° - Največja dolžina reza: 360 mm - Največja višina reza: 135 mm - Največja potisna dolžina: 6000 mm - Uvoz seznama rezov: Da - Senzor krednih črt: Da - Največji premer žaginega lista: 500 mm - Moč motorja: 10 KM - Serijska številka: 10561

Stanje: novo, Leto izdelave: 2026, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Worktable inclined by 8° Technical features of the cutting unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400 V / 50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE ON LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful feed motor for package weights up to 80 kg Maximum feed system speed: 90 m/min Pneumatic pusher lift at end of cutting cycle and overhead return. Data input management: 12” TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Dsdpfxshw Ng Ie Apljcg Edit cutting cycles (patterns) and input them directly on the controller Transfer cutting lists created on a PC via USB or Ethernet port Operating software: Manual input of loading board length Partial optimization without reading finished lengths Cutting cycle with 3 optimization options (maximum length, sequence, board sequence) Up to 1,000 cutting lists with 11 dimensions each, or a single list with 10,000 consecutive dimensions "OPTI" package: automatic board length detection and full optimization. Piece length detection by photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board sequence, volume, minimal waste, and priority length) "OPTI PLUS" package: complete optimization including knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during wood mapping Marking with fluorescent crayons/pencils (Note – Only orderable in combination with ZA250) Pneumatic side clamping device Software for creating lists on PC in XML format

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, AVTOMATSKA KROJILNICA ZA DESKE STROMAB MOD. TR600 – V SKLADU S CE NORMAMI - Vhodni valji 2 metra Dcodpfx Apex Rrp Selsg - Izhodni valji 2 metra - Št. 3 omejevalniki dolžine 250 mm - CE norme - Leto 2004 - Z navodili za uporabo in vzdrževanje + CE certifikat

Stanje: novo, Leto izdelave: 2023, največja višina reza: 200 mm, skupna masa: 700 kg, največja širina rezanja: 660 mm, premer diska: 600 mm,

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, Žaga je še vedno v uporabi, po dogovoru jo je mogoče kadar koli preizkusiti. Podatki na tipski tablici. Dodpoyaangjfx Aplscg

Stanje: novo, Leto izdelave: 2024, Système automatique de mesure de longueur et de positionnement pour toutes les scies à tronçonner STROMAB ainsi que pour toutes les machines similaires d’autres fabricants. Il sert à la fois de butée et au positionnement des pièces. Composé de: Profilé en aluminium 105 x 90 mm, anodisé Entraînement par courroie crantée 32 mm, renforcée avec fil d’acier Moteur pas à pas 6 Nm, multi-tension 115-230 V – 50/60 Hz Précision de répétition +/- 0,1 mm Vitesse de positionnement 60 m/min. Commande Type SMART 7 avec écran tactile 7 pouces Mode d’usinage absolu et incrémental 8 valeurs standards préréglées 2 versions logicielles avec différents niveaux d’optimisation optionnellement disponibles. ZM 415 – Longueur de travail utile 4.500 mm ZA333 – Table à rouleaux 4.500 x 280 mm, diamètre rouleaux 32 mm ZA341 – Support frontal 4.500 x 260 mm ZA373 – Câble de verrouillage pour scie à tronçonner existante Dcodjxraucepfx Apleg

Stanje: dober (rabljeno), Leto izdelave: 1999, Maximum working area 3000 x 1600mm Djdpsg Np Raofx Apljcg Minimum working area 390 x 420mm Motor power 2.2kW Weight 1500kg