Optimizacija žage za prečni razrez

STROMAB TR-450 MATRIX-6000

Dimensions (L x W x H): 0 x 0 x 0 mm
Weight: 900 kg
Total power requirement: 5 kW
Fully optimizing automatic crosscut saw TR-450 MATRIX-6000

- Drive motor power: 4.0 kW
- Saw blade diameter: 450 x 30 mm Z=72
- Cutting capacity according to cutting diagram
- Cutting capacity: 95 x 265 mm
- Cutting capacity: 85 x 277 mm
- Cutting capacity: 60 x 290 mm
- Cutting capacity: 40 x 310 mm
- Cutting capacity: 25 x 330 mm
- Cutting cycle: 4 seconds
- Pneumatic crosscutting unit
- Inclined worktable at 8°
- Minimum workpiece thickness: 10 mm
- Safety cover over crosscutting unit
- CE compliant
- Weight: 900 kg

Electrical connection:
- Supply voltage: 400 V / 50 Hz
- Control voltage: 24 V
- Extraction ports: 2 x 100 mm diameter
- Extraction performance: 2400 m³/h
- Air consumption per cycle: 6 Nl
- Air velocity at extraction port center: approx. 25–35 m/s

Electronically controlled pusher:
- Feed length: 6000 mm
- Pusher speed: 90 m/min
- Driven by brushless servo motor
- Feed system with precision rack and mass measuring via servo motor
- Pneumatic pusher lift at cycle end and overhead return
- Photocell for workpiece length measurement
- Photocell for defect detection
- Marking with fluorescent chalk
- Work surface inclination: 8°
- Positioning tolerance: +/- 0.4 mm

Control system:
- High-resolution 12" touchscreen monitor (800 x 600 pixels)
- Creation of cutting lists directly on machine control
- Up to 1000 cutting lists with 10 dimensions each
- Single list with up to 10,000 dimensions in sequence
- Three optimization options (maximum length, sequence, part sequence)
- Three optimization options (volume, minimal waste, priority)
- USB and Ethernet ports as standard
- Includes OPTI function for automatic measurement of the workpiece to be cut. Ideal solution for processing material with varying lengths, with single or bundle feeding. Six optimization options (maximum length, sequence, part sequence, volume, minimal waste, priority).
- Includes OPTI PLUS function for detection of markings, ensuring full optimization and removal of knots and defects.
- Marking with chalk

Options:
Bwjdpfx Aov A Hr Togtsl
- Pneumatic side clamp: €850.00
- Creating cutting lists via PC: €360.00
- Outfeed table: €360.00/m

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.