Stružnica Za Les nakup rabljenega (139.306)

Stanje: novo, The new heavy-duty professional woodturning lathe from Holzprofi. Body and bed made of solid cast iron, removable bridge, robust bearing system, quick-adjust hand rest, 24-position dividing plate with indexing, tailstock with centre point. Longitudinal and cross support. 100% Made in EU (developed, built, quality-tested) Technical specifications: Centre distance: 1270 mm Centre height: 305 mm or 600 mm Spindle thread: M 45 (M 33) Spindle taper: MK 3 Dksdpfxjwzzdas Ag Nou Tailstock taper: MK 3 Quill travel: 140 mm Spindle speeds: 375/1000/2350/3250 rpm Motor output: 3 kW S6 (2.2 kW S1) Weight: 560 kg Standard equipment: - Hollow spindle - 24-position dividing plate with index - 254 mm hand rest - Hand rest for discs up to ø1200 mm - Live centre - Four-prong drive centre - Faceplate ø254 mm - Ejector Optional special equipment: - Variable speed drive - Bed extensions (1270 mm each) - Knurling attachment - Copying device - Steady rests, travelling steady rests

Stanje: dober (rabljeno), Podajalna hitrost 10-40 m/min Razdalja: valjčna ograja do linije žage 230 mm Razdalja: podajalni valji do linije žage 159 mm Dodpexhfx Sefx Ag Nsku Razdalja med žagami 5 mm do 180 mm Dimenzije žaginega lista 6050 x 100 x 1,06 mm do največ 1,24 mm Hitrost žaginega lista 35 m/sek Premer kolesa žage 915 mm Moč motorja žage 2 x 15 kW Moč motorja za podajanje 1,1 kW z inverterjem Rezervoar za mazanje žaginega lista 2 x 6 l Napetost 400 V 50 Hz Teža cca. 6000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Through-feed lathe Intorex TRD-45 in excellent condition Maximum raw material length: 700 mm Maximum product length: 120 mm Maximum product diameter: 45 mm Dodpfowmptgsx Ag Noku Three spindle speeds: 3000/4500 RPM Spindle motor power: 5 kW Hydraulic pump motor power: 2.2 kW Input collet chucks: Ø12 – Ø45 mm Production capacity: 1200 pcs/h Machine weight: 1510 kg

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom Dkedpfxjhuthys Ag Nsu constant table height (consistent infeed height) maximum planing width: 600 mm maximum planing height: 280 mm planerheads with strip knives immediately ready for operation

Stanje: zelo dobro (rabljeno), Genini Junior Through-feed Lathe Minimum diameter: 10 mm Maximum diameter: 30 mm Spindle length: 800 mm Maximum turning length: 60 mm Turning diameter: 30 mm Dedpfxov U Uh Ts Ag Nsku Spindle motor power: 4 kW Set of collets included (diameters: 14, 17, 24, 28, 30 mm)

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Dksdpfxsv Eh Rpo Ag Nsu Teža stroja: 3200 kg Stroj WEINIG Unimat 23 E je bil izdelan leta 1999 in je zasnovan za učinkovito skobljanje lesa. Idealna izbira za strokovnjake v lesnopredelovalni industriji, ki želijo povečati svoje proizvodne zmogljivosti. Za več informacij nas kontaktirajte. Področje uporabe Skobljanje

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, hitrost vretena (min.): 18.000 obr/min, največja hitrost vretena: 2.800 obr/min, montažni premer: 300 mm, dolžina pomika po osi Y: 1.800 mm, CNC lathe with two stations – Efficiency, precision, and productivity in cylindrical workpiece machining The CNC lathe with 2 working units and numerical control is a modern solution for machining cylindrical wooden components—such as columns, table legs, or decorative elements—providing accuracy, repeatability, and efficiency in any workshop or manufacturing environment. Double performance with independent units Equipped with two working units that can operate simultaneously or independently, the lathe enables rapid machining of workpieces up to 1200 mm in length. It is ideal for serial production of furniture components, ecclesiastical elements, or artistic objects. Robust construction for durability The welded bed from rectangular profiles, thermally treated, provides stability and resistance to torsion. Linear guides on the X, Y, and Z axes ensure precise, vibration-free movement. Precision through numerical control Hybrid servomotors, together with the rack-and-pinion system, guarantee exact positioning and efficient control on all axes. The manually adjustable tailstock with four fixing points stabilizes workpieces during complex operations. Advanced motors and cooling Water-cooled motors allow operation at speeds up to 18,000 rpm without overheating, ensuring constant workflow and extended service life. Smart DSP control The DSP control unit with internal memory enables fast file import, project resume from the stopping point, and real-time parameter adjustment—ideal for a continuous and efficient production flow. Auxiliary precision and maintenance systems Self-centering chucks hold workpieces securely, while optical sensors and automatic lubrication systems ensure precision and low maintenance. Key advantages - Perfect repeatability, even for high-volume production - Operational flexibility with independent working units - Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality, and adaptability in wood machining, making it the ideal choice for modern workshops or furniture factories aiming to optimize their production processes. Maximum working length: 1200 mm Maximum working diameter (Ø): 300 mm Number of working units: 2 Control: DSP Workpiece rotational speed: 0–2800 rpm Motor power: 4.5 kW Spindle speed: 18,000 rpm Inverter: “BEST” inverter Dkjdewhbguopfx Ag Nsu Drive motors: Hybrid servomotors Maximum feed rate: 50 mm/s Accuracy: 0.0125 mm

Stanje: dober (rabljeno), Semi-automatic wood lathe Maximum working length: 1200 mm Dkedpfx Aotttp Reg Neu Maximum working diameter: 180 mm

Stanje: dober (rabljeno), wood lathe with loader, BRAND HEMPEL, available in our facility: 4 units in total—2 of 50, 1 of 90, and 1 of 120. Djdpfx Agevx Tp Rj Noku The price indicated below IS PER UNIT.

Stanje: zelo dobro (rabljeno), Genini Miniautomat Through-Feed Lathe Automatic lathe for machining squared timber Main spindle with dual-speed motor, power 4.9/5.9 kW Hydraulic pump motor power: 1.5 kW Maximum timber length: 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Two carriages with profiling tools 1 face spindle for drilling or face profiling Dksdpfxsv Hgcto Ag Nsu 1 rough turning tool Machine weight: approx. 1800 kg

Stanje: zelo dobro (rabljeno), Intorex TZ 1300 automatic lathe with grinder Dkjdpfov E Nzvox Ag Nsu Working length: 1300 mm Machine available on order

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Locatelli Ariete 3 Automatic Lathe Max/min billet length: 1000/200 mm Max/min billet dimensions: 85×85/20×20 mm Maximum workpiece length: 120 mm (with through-hole), 150 mm (without through-hole) Automatic material feeder Dsdpfx Aou Rqkmsg Njku Complete DTR technical documentation included Main motor power: 3/4 kW Two spindle speeds: 2500/3600 rpm Oil pump motor: 2.2 kW Working pressure: 6–8 bar

Stanje: rabljeno, Turning length 1,500 mm Connected load 108 kVA Total weight 19 t Rated voltage AC 400 V Rated current 156 A In our estimation, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Dksdpoxl E Tqofx Ag Nju Subject to changes and errors in the technical data and information as well as prior sale!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1971, Swing diameter over bed: 800 mm Swing diameter over cross slide: 480 mm Turning length: 3000 mm Swing diameter in gap: 850 mm Centre height over bed: 380 mm Bed width: 550 mm Spindle head: DIN 55022/8 Spindle bore: 73 mm Speeds: 18 - 900 rpm Feeds: 224 / 0.018–10 mm/rev Thread pitches – metric: approx. 84: 0.2 – 224 mm Total power requirement: 17.5 kW Machine weight approx.: 8.6 t Space requirements approx.: 5.5 x 1.8 x 1.72 m Solid universal lathe with longitudinal and facing automatic feed, pole-changeable spindle motor (i.e. two spindle speeds by increasing the motor speed), single-lever operation for all slide movements, feed preselection switch, hardened bedways, double-walled bed for high rigidity, front guideway raised and rear guideway set deep in the V-prism for high accuracy, triple bearing spindle, threads in mm, inch and diametral pitch. Year of manufacture is estimated. Extensive accessories! This is a used machine, therefore we sell under exclusion of any warranty. Dkodpfowwatrox Ag Nju STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM

Stanje: rabljeno, Leto izdelave: 1952, Technical Details: Swing diameter over bed: 1000 mm Swing diameter over slide: 520 mm Turning length: 2500 mm Slide travel Z-axis, saddle: approx. 500 mm Slide travel Z-axis, top slide: approx. 300 mm Center height: 300 mm Spindle bore: 90 mm Speed range: 3.2 - 382 / 22 steps rpm Feed range X-direction, longitudinal: 0.213 - 2.67 / 36 steps m/min Feed range Y-direction, cross: 0.070 - 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Machine weight approx.: 8.2 t Machine dimensions approx. LxWxH: 5.3 x 1.6 x 1.6 m Transport dimensions approx.: 5.5 x 1.7 x 1.6 m Dkedeu Tq U Ispfx Ag Neu Equipment: Face plate Ø 1000 mm 4-position tool post Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Stanje: rabljeno, Leto izdelave: 2013, In our estimation, the machine is in good used condition and can be demonstrated under power by appointment. Two machines are available. Dksdsv N Razspfx Ag Nsu Accessories, pictured tools, and clamping devices are only included in the scope of delivery if explicitly stated in the additional information. Technical data and specifications are subject to change or error. Prior sale reserved.

Stanje: rabljeno, Leto izdelave: 1963, Technical details: Swing diameter over bed: 1000 mm Swing diameter over saddle: 620 mm Turning length: 3150 mm Centre distance: 3150 mm Swing diameter in gap: 1200 mm Length of gap: 800 mm Dkodpfxju Ix Are Ag Neu Machine weight approx.: 11.5 t Machine dimensions approx. LxWxH: 7.5 x 1.5 x 1.7 m Including 2 steadies and various centres

Stanje: rabljeno, Leto izdelave: 1998, Control: Siemens 840 D Swing diameter over cross slide: 650 mm Main spindle: - Max. speed: 3800 rpm - Spindle diameter at front bearing: 150 mm - Spindle bore: 92 mm - Spindle nose: A8 DIN 55026 Tool turret: - Number of tool stations: 2 x 12 positions - Tool holder: VDI 40 Machine weight: approx. 7.0 t In our assessment, the machines are in good used condition and can be inspected under power by appointment. Technical Features: - Nominal length: 1500 mm Accessories: Dodpfx Agevdt H Hj Nsku - Chip conveyor - Felsomat loading system - Power chuck - Milling body Two identical machines are available. Accessories, depicted tooling, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and information. Prior sale reserved!

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Swing diameter over bed: 630 mm Swing diameter over saddle: 320 mm Turning length: 2,800 mm Distance between centers: 2,800 mm Swing diameter in gap: 700 mm Gap length: 450 mm Spindle bore: 70 mm Dedpfxou Ix A Es Ag Neku Machine weight approx.: 4.4 t Machine dimensions approx. LxWxH: 4.7 x 1.5 x 1.5 m Thread cutting capability Accessories: 4-jaw chuck Various centers Gears Jaws and small parts Steady rest *

Stanje: dober (rabljeno), Koda: 0112 Znamka: CENTAURO Model: T3-130 Dkedpfswhyu Dsx Ag Nju Hidravlični kopirni stružnica za les, stopnice, okvirje, stole, mize itd. Samodejni sistem struženja s kopirnim programom za eno ali dve prehodni operaciji Hidravlična kopirna enota z otipno sondo Maksimalna razdalja med konicama: 1300 mm Višina konic nad paleto: 226 mm Največji premer: 250 mm Premer tulec vpetja zadnjega konika: 60 mm Hod tulec zadnjega konika: 100 mm Hitrost pomika vozička: 0–6 m/min Hitrost povratka vozička: 7,33 m/min Število vrtljajev vretena: 900/1500/1800/2250/3000/4500 min⁻¹ Moč motorja vretena: 5 KM Vgrajena moč: 4,8 kW Skupne dimenzije: 3520 x 1190 x 1680 mm (VxŠxG) Teža: 1000 kg

Stanje: rabljeno, Leto izdelave: 1985, širina tira: od 1430 mm do 1520 mm Dkjdpfjwzg Tgsx Ag Nsu razpon premera: ø700 do ø1120 mm

Stanje: novo, Centre height: 250 mm Swing diameter over cross slide: 350 mm Swing diameter in gap: 695 mm Distance between centers: 1,500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide travel: 272 mm Top slide travel: 155 mm Spindle bore: 80 mm Speed range, stepless: (3) 30 - 2,200 rpm Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14 mm Diametral pitch threads: (21) 8 - 44 D.P.I Module threads: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/rev Cross feeds: 0.02 - 0.50 mm/rev Motor power: 5.5 kW Dimensions (LxWxH), approx.: 2,900 x 1,175 x 2,040 mm Weight, approx.: 2,200 kg Features: - Toolmaker’s accuracy - Stepless speed control (3 headstock ranges) - Dynamically balanced main spindle - Rigid machine bed with hardened and ground guideways - One-piece cast iron base - Adjustable precision tapered roller bearings in main spindle - Easy-to-operate feed gearbox with wide feed range in fully enclosed oil bath - Low-maintenance central lubrication - Removable gap bridge - CE certified Equipment: - 3-axis digital readout (resolution 0.005 mm) - Frequency inverter - Machine stand with high splash guard and integrated lighting - Front pull-out chip tray - 3-jaw chuck - Fixed steady rest - Travelling steady rest - Micrometer bed stop - Oil cooler - Two emergency stop buttons and foot pedal with electric braking system - Safety interlocked chuck guard, tool post guard, and lead & feed screw covers compliant with CE European safety standards - Coolant system - Fixed centre - Reducing sleeve for main spindle Dkjdpfxogt E Ilo Ag Nsu - Operating tools in toolbox

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7753 TEHNIČNI PODATKI - maks. premer obdelovanih zatičev: 130 mm - nameščena tulec: 110 mm - maks. premer vhodnega materiala: 160 mm - min. dolžina vhodnega materiala: 800 mm - maks. dodatek za obdelavo na stran: 15 mm - motor pogona nožne glave: 15 kW - 3 vrste podajalnih hitrosti + naprej/nazaj - podajalni motor: 1,1 kW Zaporedje: - 3 zobati pogonski valji - 3-nožna glava - 3 gladki izhodni pogonski valji - dimenzije d/š/v: 3100x1400x1500 mm - teža: 2100 kg PREDNOSTI – poljska proizvodnja – 3-nožna glava – uporabljena stružnica, zelo dobro stanje Cena brez DDV: 36.900 PLN Cena brez DDV: 8.680 EUR glede na tečaj 4,25 EUR (Cene se lahko spreminjajo glede na večja nihanja) Dkodpsxhddgefx Ag Nju

Leto izdelave: 1980, Stanje: zelo dobro (rabljeno), Širina: 1000–1676 mm Dolžina osi: 1327–2700 mm Premer koles: 460–1120 mm Premer osi: 70–200 mm XAD 112, dodatne informacije na zahtevo Dksdpfx Aenbfcrjg Nou

Stanje: novo, TC 205 x 1000 Centre height: 205 mm Swing diameter over bed: 410 mm Distance between centres: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Cross slide travel: 220 mm Top slide travel: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 rpm Dksdpfxoir If De Ag Neu Speed control: Infinitely variable Mechanical speed ranges: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Cross feeds X: 0.025 - 0.85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametral pitch threads: (21) 8 - 44 DP Module threads: (18) 0.3 - 3.5 MP Tailstock quill diameter: 52 mm Tailstock taper: MT 4 Tailstock quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control (2 mechanical speed ranges) - Precision-balanced main spindle - Rigid machine bed with hardened and ground guideways - Monolithic cast-iron base - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gearbox with a wide feed range running in an enclosed oil bath - Low-maintenance central lubrication - Removable gap bridge Scope of delivery: - 3-axis digital readout (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool post with four tool holders - High splash guard with integrated LED trough light - Pull-out chip tray at the front - Overload clutch - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine pads (1 set of 6 pieces) - Two emergency stop buttons - Foot pedal with dual brake system (mechanical and electrical) - Chuck guard, tool post guard and leadscrew cover with limit switch protection in accordance with European CE safety standards - Coolant system - 2 fixed centres - Reducing sleeve for main spindle - Operating tools - Operating tools in toolbox - Operating manual with spare parts list