Illig nakup rabljenega (44)

Stanje: rabljeno, Leto izdelave: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Pgjdpfx Agsxlzrcjwju Technical Data: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station: - Schleicher P03 control system - Automatic loading and unloading function - Top heating system with ceramic emitters and 5-zone control - Bottom heating system with ceramic emitters and 3-zone control - Program and heating settings storage - Clamping frame with quick-change system - Parallel top frame, longitudinal rails for use with fixed format frames - Bottom clamping frame for frame installation from below, central clamping via electric motor - Lower table pneumatically operated, rapid/slow speed adjustable in percentage - Top plug assist with rapid/slow speed adjustable in percentage - Pre-blow automatic, percentage adjustable - Pre-vacuum function, percentage adjustable - Demolding automatic, percentage adjustable - Sheet sag control via light barrier with support air - 6-fold cooling fan system - Large front opening for easy tool change - Vacuum pump Sheet Feeding: - Automatic sheet feeding device - Preheating system in feeding for complete or preheating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustment of transport width

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Production: Illig Type: HSA 50C The machine is incomplete and not operational! Pedpfsuk Dwfox Agwegu For spare parts only!!

Stanje: rabljeno, Leto izdelave: 1990, Oznaka stroja: Rabljeni stroj za pakiranje (termoformirna linija) Pedpfjxm Sa Hox Agwegu Proizvajalec: Adolf Illig Tip: SB 53C - DIN Leto izdelave: 1990 Pogon motorja: 1,24 kW Dimenzije: D 1.600 x Š 1.135 x V 2.710 mm Lastna teža: 500 kg Tehnična dokumentacija: Da Opomba: Ogrevalna moč: 4,5 kW (15 keramičnih ploščatih grelcev) Vakuumska enota: največja stopnja vakuuma 0,95 kp/cm² Formati: Oblikovalna površina: 405×500 mm Velikost kartona: 400×495 mm Širina folije: 445 mm Pozitivna globina vleka: 150 mm Negativna globina vleka: 150 mm Višina pakiranja: 150 mm Premer folijskega valja (blister): 400 mm Premer folijskega valja (skin): 350 mm Notranji premer valja: 70 mm Stanje: Rabljeno Cena: Na zahtevo

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, obratovalne ure: 80.188 h, številka stroja/vozila: 322, Max. film width 700-800 mm Equipment / further details: - GREINER STACKING / Transfer unit R3 (Ref. No.: 95002.24) // M. No.: 00020 // Year: 1998 Top and bottom heating Materials processed: PS and PP Pgedpfx Agsq Nn Hcjweu 450 cycles PS // 350 cycles PP The following tools have been used on the machine: 8-cavity tool, Ø95 mm; 15-cavity tool, Ø73 mm; and 15-cavity tool, Ø86 mm The machine has mainly been used for manufacturing packaging for the dairy industry. Cycle speed is 18-25 cycles, depending on cup weight.

Stanje: dober (rabljeno), Leto izdelave: 1990, obratovalne ure: 45.350 h, številka stroja/vozila: 1537, Hybrid machine capable of thermoforming sheets or rolls. Machine equipped with a BE-type sheet loader without preheating. Equipped with a PR-type roll unwinder. Fitted with both upper and lower tables. Controlled by a Schleicher PDPF controller. Quick clamping system for reduction frames and tooling. Maximum width: 700 mm. Psdpotv Ivzefx Agwogu Maximum sheet size: 1000 x 700 mm. Maximum sheet thickness: 10 mm. We will handle disassembly and loading onto your truck, which you must make available for collection.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Znamka Illig Model RV 74 Psdpjxp H Nuofx Agwjgu Leto 1999 Ure Približno TBC Dobava Takoj Postaje Oblikovanje, rezanje in zlaganje Največje območje oblikovanja 700 x 500 mm Najmanjše območje oblikovanja 400 x 250 mm Globina vleka zgoraj/spodaj 120 / 40 mm Največja debelina materiala 2,0 mm Največja delovna hitrost 20 / min Skupna teža 6.600 kg Vsi podatki so predmet sprememb in/ali napak. Vsa oprema je na voljo do razprodaje.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, ILLIG univerzalni termoformirni stroj tip UA 155 4g solo Tehnični podatki - Siemens upravljanje - Največja velikost materiala: 1500 x 1250 mm - Največja površina oblikovanja: 1450 x 1200 mm - Največja višina orodja: 700 mm - Največja debelina materiala: 12 mm - Ogrevalna moč: 96 kW - Skupna moč: 105 kW - Električni varovalni tok: 160 A - Zmogljivost vakuumske črpalke: 250 m³/h - Potreba po stisnjenem zraku: 6 bar Oprema - Gornje gretje s 5-conskim HTS krmiljenjem (700ºC) - Spodnje gretje s 5-conskim HTS krmiljenjem (500ºC) - Hladilni ventilator D06 - Miza kaskada Pedpfx Aoxlzqfsgwegu - Vakuumska kaskada - Zgornji bat - Vključno z ILLIG hladilno enoto in ILLIG temperirno enoto

Leto izdelave: 1998, Stanje: rabljeno, ILLIG UA 225 ED vakuumski termoformirni stroj, avtomat za plošče, stroj za oblikovanje plošč Vakuumski termoformirni stroj / stroj za oblikovanje plošč Proizvajalec: ILLIG Tip: UA 225 ED Leto izdelave: 1998 Delovne ure: 40.191 Pjdpexg I Dusfx Agwsgu Delovno območje: 2.200 x 1.200 mm Stanje: Stroj je še vedno priključen na elektriko in je bil v uporabi do junija 2024. Prodaja zaradi insolventnosti.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1975, A Thermoforming machine from Illig is available. Forming dimensions X/Y: 500mm/380mm, max. film width: 540mm, forming depth range: -120mm/+120mm, max. advance length: 360mm, cycle rate: 30 cycles/min, punching area X/Y: 500mm/390mm, punching force: 50,000 daN, machine dimensions X/Y/Z: approx. 4,500mm/2,200mm/2,200mm, weight: approx. 4,500kg. Documentation available. On-site inspection is possible. Pgjdpfx Aswixynegweu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, obratovalne ure: 41.685 h, Technical data: Rated power, kW: 11.3 Forming area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. draw depth (negative), mm: 100 Cycles/min (min.-max.): 48 Air consumption/cycle at 6 bar: 100 Nl (compressed air) Discharged thermal energy: With top heating approx.: 10,260 KJ/h Pgedpfx Agoq A Um Roweu With top and bottom heating approx.: 17,715 KJ/h Special equipment: Hollow floor device available Control cabinet: included

Stanje: dober (rabljeno), Leto izdelave: 1990, obratovalne ure: 11.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1531, širina folije: 700 mm, vrsta vhodnega toka: Klimatska naprava, skupna širina: 700 mm, skupna dolžina: 3.500 mm, skupna višina: 3.500 mm, vhodna napetost: 400 V, moč vakuumske črpalke: 3.000 W, priključek za stisnjen zrak: 6 letvica, delovna širina: 700 mm, zmogljivost črpalke: 100 l/min, minimalna višina orodja: 300 mm, širina krmilne omare: 1.000 mm, obratovalna temperatura: 650 °C, UA 100 1 g thermoforming machine, year 1990, in good working condition. Maximum sheet dimensions: 1000x700x10 mm Upper heating: 3 pilot emitters, lower heating: 1 pilot emitter Counter-mould height with motorized adjustment Quick clamping system for upper and lower frames Quick clamping of tooling on the lower table Quick clamping of tooling on the upper table Film sag control (lower film) Pedjt Iracspfx Agwjgu Bubble forming with photoelectric cell Adjustable and memorisable bubble intensity and demoulding (cascaded pneumatic valves) BUSCH vacuum pump 100 m³/h Machine has been stopped and stored after being replaced by a new ILLIG UA 4 g automatic machine Price is for the machine disassembled and loaded onto your truck It can be restarted for demonstration if you wish to inspect it

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1506, širina folije: 1.000 mm, vrsta vhodnega toka: trifazni, pritisk: 6 letvica, skupna širina: 700 mm, skupna dolžina: 1.000 mm, skupna višina: 350 mm, vhodna napetost: 400 V, najv. debelina pločevine: 10 mm, ogrevalna zmogljivost: 30 kW (40,79 KM), skupna masa: 1.500 kg, višina orodja: 490 mm, Tip stroja: ILLIG UA 100 G Številka stroja: 1506 Leto izdelave: 1988 Skupna teža: pribl. 1,5 t Napajanje: 3x400V Skupna poraba energije: 35 kWh Skupna moč ogrevanja (zgoraj in spodaj): 30 kWh Tip grelne plošče: keramična Največja velikost plošče: 1000x700 mm Najmanjša velikost plošče: 310x210 mm Največja debelina plošče (ročno nalaganje): 12 mm Največja površina oblikovanja: 960x660 mm Najmanjša površina oblikovanja: 270x170 mm Pjdjwfdd Dopfx Agwjgu Višina pozitivno oblikovanega izdelka: 350 mm Višina negativno oblikovanega izdelka: 350 mm Največja višina orodja: 490 mm Stroj je bil približno leta 2020 obnovljen. Vgrajen je bil nov krmilni sistem Omron, ki je zamenjal originalni Schleicher, prav tako pa smo obnovili ožičenje in električno omarico.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Technical specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Equipment: Forming Station - Schleicher P03 control system - Automatic setup function - Upper ceramic heater (500 W) with 4-zone control - Individually selectable upper heating elements, including lowering function - Lower ceramic heater (300 W) with 4-zone control - Individually selectable lower heating elements, including lowering function - Program and heating setting storage capability - Clamping frame with quick-change system - Upper frame parallel, longitudinal beams for use with fixed-format frames - Lower clamping frame for bottom frame insertion, central clamping via electric motor - Lower table pneumatically operated, rapid/creep speed adjustable in 15 steps via control panel - Upper plunger rapid/creep speed adjustable in 7 steps - Vacuum pump with cascade control, adjustable in 15 steps via control panel - Pre-blow function adjustable as a percentage Pgedpfxowf Eb Ro Agwju - Pre-suction function adjustable as a percentage - Automatic demolding function adjustable as a percentage - Plate sag control via light barrier with supporting air - 8-fold cooling fan with spray nozzle cooling - Large front opening for easy tool change Feeding - Automatic sheet feeding device - Centering table for precise positioning of sheets in the feed system - Motorized sheet lifter - Motorized sheet positioning adjustment - Motorized transport lifter - Motorized transport width adjustment

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1965, Form dimensions X/Y: 475mm/250mm, max. material width: 495mm, max. feed length: 280mm, max. negative forming depth: 100mm, max. roll diameter: 1200mm, max. material thickness: 2.3mm, max. cycle rate: 48 cycles/min, forming output: approx. 6,500 cups/min, machine dimensions X/Y/Z: approx. 5,500mm/2,200mm/2,100mm, weight: approx. 2,000kg. Documentation available. An on-site inspection is possible. Psdewixyzepfx Agwsgu

Stanje: delavnici obnovljeno (rabljeno), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Psdpfx Agjwf Dvaowjgu Max. sheet thickness (manual loading): 12 mm Max. sheet thickness (automatic loading): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical Features: - Control: Siemens Simatic S7-300, OP 37 panel - Climate-controlled control cabinet - Top heater: 5 temperature control circuits via pilot radiators - Bottom heater: 5 temperature control circuits via pilot radiators - Individual emitter control for both top and bottom heaters - Parallel clamping frame - Pneumatically actuated locking of upper reduction frame - Locking of lower reduction frame via cylinder - 4 cooling fans - Adjustable vacuum under the table via cascade control - Adjustable pre-blow/demould function via cascade control - Large front opening for tool change - Film sag control using photocell with support air - Automatic tool change system Under-table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Top punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change tool clamping system Sheet feeding: - Automatic raising of the film transport chain by motor - Pneumatic quick-change system for suction plates - Motorized centering of plastic sheets - Separate vacuum pump for embossed material Optional retrofit: Preheating unit - Top heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Bottom heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Temperature control for top and bottom heaters via separate controllers in the BE control cabinet (temperature setting not via UA operator panel) Optional retrofit: Roll processing - Cross cutter and feeder rollers in loader - Roll stand RO 800

Leto izdelave: 1976, Stanje: pripravljen za uporabo (rabljen), Three Illig punching machines are available for precise punching of thermoformed plastic parts made from film material. Working width: approx. 900 mm, working height: approx. 120 mm, roller diameter: approx. 196 mm, machine dimensions (L/W/H): approx. 2500 mm / 1300 mm / 1600 mm, weight: approx. 750 kg. Includes two Wolf EHPT 6E hydraulic presses and two manual swing-arm die cutters. An on-site inspection is possible. Pgedpfx Ajwixybogwju

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tehnični podatki: • 4-postajna rotacijska miza • Največja zvarilna površina: 350 x 250 mm • Največja globina blistra: 70–100 mm glede na vrsto izdelka • Sila varjenja: 12.800 N • Moč grelca za varjenje: 1,75 kW • Podajalec kartonske embalaže Pgsdpefua Dcjfx Agwou • Izmetalec embalaže • Enota za oblikovanje kartona • Kabel s CEE 16A vtikačem • Teža cca 750 kg Stroj je na voljo v vseh izvedbah: b, b-2, b-3, b-4.

Leto izdelave: 1971, Stanje: pripravljen za uporabo (rabljen), A universal double-stroke thermoforming machine by Illig is available. Forming dimensions X/Y: 960mm/560mm, maximum draw depth: 280mm, maximum sheet dimensions X/Y: 960mm/560mm, motor power: 1.5 kW, heating power: 16.3 kW, heating zones: top and bottom. An on-site inspection is possible. Pgjdpfx Aowixyhjgwju

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Max. forming area: 960 x 660 mm Min. forming area: 269 x 444 mm Max. sheet thickness manual loading: 12 mm Max. sheet thickness automatic loading: 10 mm Max. tool height: 450 mm Year of manufacture: 2000 Technical equipment forming station UA 101 L: - Siemens control system with swiveling operator panel - Powered movement of top and bottom heaters via swing arm - Top heater with 5 temperature control circuits using pilot burners - Bottom heater with 3 temperature control circuits using pilot burners - Height-adjustable top heater - Upper punch unit - Parallel clamping frame - Automatic window plate adjustment lower frame - Automatic window plate adjustment upper frame - Under-table vacuum adjustable via cascading control - Pre-blow/demoulding adjustable via cascading control - 4 cooling fans - Front opening for tool change, pneumatically locked - Sag control for film - Pre-blow control for film - Vacuum preparation at top punch - Temperature control connection - Automatic tool changing system, major tooling change Pgjdjwf Dtxopfx Agwju - Vacuum pump Technical equipment feed system BE 101 L: - Upper and lower pre-heating - Powered movement of top and bottom heaters via swing arm - Top heater with 5 temperature control circuits using pilot burners - Bottom heater with 3 temperature control circuits using pilot burners - Height-adjustable top heater - Powered, parallel lifting film transport - Film transport via pin chain - Film guidance via rollers - Automatic transport width adjustment - Powered sheet lifter with automatic tool clamping - Mobile sheet loading trolley Options (price on request): - Pyrometer in top heater for measuring foil temperature - Retrofit for roll material processing

Leto izdelave: 1996, Stanje: pripravljen za uporabo (rabljen), Heating capacity: 22.15 kW, motor power: 2.5 kW, max. compressed air connection: 10 bar, including spare parts. Pgsdpfjglvdyex Agwsu

Stanje: delavnici obnovljeno (rabljeno), Top heating with small individual radiant heater controlled by toggle switch Bottom heating with large radiant heater Upper punch system Protective grid 4 cooling fans type D05 Pgjdpfxefug Ano Agwou Pre-blow and automatic demoulding system

Leto izdelave: 1969, Stanje: pripravljen za uporabo (rabljen), A cylinder die-cutting machine by Adolf Illig is available. Feed width: approx. 850 mm, feed height: approx. 120 mm, roller diameter: approx. 190 mm. Table dimensions X/Y/Z: 2x approx. 1200 mm/1200 mm, working height: approx. 800 mm. Machine dimensions X/Y/Z: approx. 2700 mm/1350 mm/1550 mm. Weight: approx. 900 kg. An on-site inspection is possible. Pedpfx Ajw D Euhjgwjgu

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, širina folije: 1.500 mm, Technical specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum draw depth: 700 mm - Maximum material thickness: 12 mm Features: Forming station - Siemens S7 control system - Fully automatic setup function Pgodpfjft S Eajx Agwju - Top heating with 7 pilot emitters, adjustable via S7 touchscreen & joystick (motorized travel) - Bottom heating with 7 pilot emitters, adjustable via S7 touchscreen & joystick (motorized travel) - Contactless emitter control (solid state relay) - Synchronous upper platen system (hydraulic adjustment) - Clamping frame (hydraulic adjustment) - Tooling table (hydraulic adjustment) - Central cooling via fresh air supply - Triple film sag detection with automatic air support function - Triple tool monitoring - Automatic air box evacuation - Quick-change system for mold, clamping frame, and pre-stretch plug, with fully and semi-automatic sequence - Mold tool extendable on front flap - Forming vacuum monitoring - Pre-blow automation via pre-blow time - Automatic basic setting with self-optimization of emitter temperatures - Heating, cooling, and cycle times - Cycle time calculation for all expansion stages - Position measuring system for table location - Clamping frame, upper platen, and tool temperature control - Storage of programs and heating settings - Lower clamping frame for frame installation from below, central clamping via electric motor - Cascade for vacuum, pre-blow, demolding, tooling table, upper platen - Adjustable speeds for tooling table, upper platen, and clamping frame - Pneumatically lockable front door - Main switch cabinet climate control Automatic sheet and roll feeding - Film unwind stand including loading aid and pneumatic brake - Automatic sheet magazine centering (motorized adjustment) - Top heating usable as preheating or final heating (motorized travel) - Bottom heating usable as preheating or final heating (motorized travel) - Motorized sheet lifter - Vacuum pump for textured material - Material transport via transport chain and roller rail for improved handling, even with thin materials Options available on request.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Plate size: 1250 x 1500 mm Pgjdpfx Aswf Ea Tegweu Forming area: 1200 x 1460 mm Draw depth: 700 mm If you would like further details or a quotation, please feel free to contact us.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, For sale here is an Illig SB 74 D, suitable for skin packaging, blister packaging is not possible. Pedpewpvbpofx Agwogu Technical data available upon request.