Illig Ua 100 nakup rabljenega (30)

Stanje: delavnici obnovljeno (rabljeno), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual loading): 12 mm Max. sheet thickness (automatic loading): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical Features: - Control: Siemens Simatic S7-300, OP 37 panel - Climate-controlled control cabinet - Top heater: 5 temperature control circuits via pilot radiators - Bottom heater: 5 temperature control circuits via pilot radiators - Individual emitter control for both top and bottom heaters - Parallel clamping frame Lredpfswf Dvajx Adkei - Pneumatically actuated locking of upper reduction frame - Locking of lower reduction frame via cylinder - 4 cooling fans - Adjustable vacuum under the table via cascade control - Adjustable pre-blow/demould function via cascade control - Large front opening for tool change - Film sag control using photocell with support air - Automatic tool change system Under-table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Top punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change tool clamping system Sheet feeding: - Automatic raising of the film transport chain by motor - Pneumatic quick-change system for suction plates - Motorized centering of plastic sheets - Separate vacuum pump for embossed material Optional retrofit: Preheating unit - Top heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Bottom heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Temperature control for top and bottom heaters via separate controllers in the BE control cabinet (temperature setting not via UA operator panel) Optional retrofit: Roll processing - Cross cutter and feeder rollers in loader - Roll stand RO 800

Stanje: delavnici obnovljeno (rabljeno), Top heating with small individual radiant heater controlled by toggle switch Bottom heating with large radiant heater Upper punch system Lredpfxefug Ane Adkoi Protective grid 4 cooling fans type D05 Pre-blow and automatic demoulding system

Stanje: dober (rabljeno), Leto izdelave: 1990, obratovalne ure: 45.350 h, številka stroja/vozila: 1537, Hybrid machine capable of thermoforming sheets or rolls. Machine equipped with a BE-type sheet loader without preheating. Equipped with a PR-type roll unwinder. Fitted with both upper and lower tables. Lodpfotv Ivzjx Adkori Controlled by a Schleicher PDPF controller. Quick clamping system for reduction frames and tooling. Maximum width: 700 mm. Maximum sheet size: 1000 x 700 mm. Maximum sheet thickness: 10 mm. We will handle disassembly and loading onto your truck, which you must make available for collection.

Stanje: dober (rabljeno), Leto izdelave: 1990, obratovalne ure: 11.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1531, širina folije: 700 mm, vrsta vhodnega toka: Klimatska naprava, skupna širina: 700 mm, skupna dolžina: 3.500 mm, skupna višina: 3.500 mm, vhodna napetost: 400 V, moč vakuumske črpalke: 3.000 W, priključek za stisnjen zrak: 6 letvica, delovna širina: 700 mm, zmogljivost črpalke: 100 l/min, minimalna višina orodja: 300 mm, širina krmilne omare: 1.000 mm, obratovalna temperatura: 650 °C, UA 100 1 g thermoforming machine, year 1990, in good working condition. Maximum sheet dimensions: 1000x700x10 mm Upper heating: 3 pilot emitters, lower heating: 1 pilot emitter Counter-mould height with motorized adjustment Quick clamping system for upper and lower frames Quick clamping of tooling on the lower table Quick clamping of tooling on the upper table Lrjdpfx Adot Iracskoi Film sag control (lower film) Bubble forming with photoelectric cell Adjustable and memorisable bubble intensity and demoulding (cascaded pneumatic valves) BUSCH vacuum pump 100 m³/h Machine has been stopped and stored after being replaced by a new ILLIG UA 4 g automatic machine Price is for the machine disassembled and loaded onto your truck It can be restarted for demonstration if you wish to inspect it

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, obratovalne ure: 45.353 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1537, višina izdelka (maks.): 10 mm, dolžina plošče: 1.000 mm, širina plošče: 700 mm, Hybrid machine for thermoforming sheets or coils TECHNICAL DETAILS Maximum width: 700 mm Maximum plate size: 1,000 x 700 mm Maximum sheet thickness: 10 mm Heating capacity: 31.1 kW Motor power: 5.59 kW EQUIPMENT - Plate loader type BE without preheating - Coil unwind unit type PR Lrodpfjwr Abzjx Adkei - Upper and lower table - Schleicher PDPF control director - Quick clamping of reduction frames and tools

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1531, obratovalna temperatura: 650 °C, dolžina plošče: 1.000 mm, širina plošče: 700 mm, TECHNICAL DETAILS Film width: 700 mm Input current type: Alternating current (AC) Input voltage: 400 V Sheet thickness: 10 mm Sheet dimensions: 1,000 x 700 mm Operating temperature: 650 °C Pump capacity: 100 l/min Vacuum pump power: 3,000 W Compressed air connection: 6 bar Forming height (min.): 300 mm MACHINE DETAILS Total width: 700 mm Total length: 3,500 mm Total height: 3,500 mm Control cabinet width: 1,000 mm EQUIPMENT Lsdpfjwr Ab Ujx Adksri - Top heater with 3 pilot burners, bottom heater with 1 pilot burner - Counter mold height adjustable by motor - Quick clamping of upper and lower frames - Quick clamping of tools on the lower table - Quick clamping of tools on the upper table - Control of sagging of the bottom film - Bubble formation via electric photo cell - Programmable bubble and demolding intensity, pneumatic valves in cascade - BUSCH vacuum pump 100 m³/h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1594, TECHNICAL DETAILS Machine number: 1594 Year of manufacture: 1993 Voltage: 3~220 V, 50 Hz Motor power: 3.52 kW Heating capacity: 216.0 kW Ljdsww Igyjpfx Adkori Rated operating current: 86.5 A Permissible air pressure: 10 bar

Stanje: delavnici obnovljeno (rabljeno), Sheet size: 1000 x 1500 mm Forming area: 960 x 1460 mm Drawing depth: 600 mm If you would like more details or a quote, please feel free to contact us. Lodpfx Adewf D R Roksri

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, širina folije: 1.500 mm, Technical specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm Ljdpfx Aeft S Eaedksri - Maximum draw depth: 700 mm - Maximum material thickness: 12 mm Features: Forming station - Siemens S7 control system - Fully automatic setup function - Top heating with 7 pilot emitters, adjustable via S7 touchscreen & joystick (motorized travel) - Bottom heating with 7 pilot emitters, adjustable via S7 touchscreen & joystick (motorized travel) - Contactless emitter control (solid state relay) - Synchronous upper platen system (hydraulic adjustment) - Clamping frame (hydraulic adjustment) - Tooling table (hydraulic adjustment) - Central cooling via fresh air supply - Triple film sag detection with automatic air support function - Triple tool monitoring - Automatic air box evacuation - Quick-change system for mold, clamping frame, and pre-stretch plug, with fully and semi-automatic sequence - Mold tool extendable on front flap - Forming vacuum monitoring - Pre-blow automation via pre-blow time - Automatic basic setting with self-optimization of emitter temperatures - Heating, cooling, and cycle times - Cycle time calculation for all expansion stages - Position measuring system for table location - Clamping frame, upper platen, and tool temperature control - Storage of programs and heating settings - Lower clamping frame for frame installation from below, central clamping via electric motor - Cascade for vacuum, pre-blow, demolding, tooling table, upper platen - Adjustable speeds for tooling table, upper platen, and clamping frame - Pneumatically lockable front door - Main switch cabinet climate control Automatic sheet and roll feeding - Film unwind stand including loading aid and pneumatic brake - Automatic sheet magazine centering (motorized adjustment) - Top heating usable as preheating or final heating (motorized travel) - Bottom heating usable as preheating or final heating (motorized travel) - Motorized sheet lifter - Vacuum pump for textured material - Material transport via transport chain and roller rail for improved handling, even with thin materials Options available on request.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, ILLIG univerzalni termoformirni stroj tip UA 155 4g solo Tehnični podatki - Siemens upravljanje - Največja velikost materiala: 1500 x 1250 mm - Največja površina oblikovanja: 1450 x 1200 mm Lredpfsxlzqfsx Adkji - Največja višina orodja: 700 mm - Največja debelina materiala: 12 mm - Ogrevalna moč: 96 kW - Skupna moč: 105 kW - Električni varovalni tok: 160 A - Zmogljivost vakuumske črpalke: 250 m³/h - Potreba po stisnjenem zraku: 6 bar Oprema - Gornje gretje s 5-conskim HTS krmiljenjem (700ºC) - Spodnje gretje s 5-conskim HTS krmiljenjem (500ºC) - Hladilni ventilator D06 - Miza kaskada - Vakuumska kaskada - Zgornji bat - Vključno z ILLIG hladilno enoto in ILLIG temperirno enoto

Stanje: rabljeno, Leto izdelave: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Data: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station: - Schleicher P03 control system - Automatic loading and unloading function - Top heating system with ceramic emitters and 5-zone control - Bottom heating system with ceramic emitters and 3-zone control - Program and heating settings storage - Clamping frame with quick-change system - Parallel top frame, longitudinal rails for use with fixed format frames - Bottom clamping frame for frame installation from below, central clamping via electric motor - Lower table pneumatically operated, rapid/slow speed adjustable in percentage - Top plug assist with rapid/slow speed adjustable in percentage - Pre-blow automatic, percentage adjustable - Pre-vacuum function, percentage adjustable - Demolding automatic, percentage adjustable - Sheet sag control via light barrier with support air - 6-fold cooling fan system - Large front opening for easy tool change - Vacuum pump Lrsdpjxlzrcsfx Adkji Sheet Feeding: - Automatic sheet feeding device - Preheating system in feeding for complete or preheating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustment of transport width

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Plate size: 2000 x 1000 mm Forming area: 1960 x 960 mm Draw depth: 600 mm Ledpewf Ebwjfx Adkjri If you would like more details or a quotation, please feel free to contact us.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Max. forming area: 960 x 660 mm Min. forming area: 269 x 444 mm Max. sheet thickness manual loading: 12 mm Max. sheet thickness automatic loading: 10 mm Max. tool height: 450 mm Year of manufacture: 2000 Technical equipment forming station UA 101 L: - Siemens control system with swiveling operator panel - Powered movement of top and bottom heaters via swing arm - Top heater with 5 temperature control circuits using pilot burners - Bottom heater with 3 temperature control circuits using pilot burners - Height-adjustable top heater - Upper punch unit - Parallel clamping frame - Automatic window plate adjustment lower frame - Automatic window plate adjustment upper frame - Under-table vacuum adjustable via cascading control - Pre-blow/demoulding adjustable via cascading control - 4 cooling fans - Front opening for tool change, pneumatically locked - Sag control for film - Pre-blow control for film - Vacuum preparation at top punch - Temperature control connection - Automatic tool changing system, major tooling change - Vacuum pump Technical equipment feed system BE 101 L: - Upper and lower pre-heating - Powered movement of top and bottom heaters via swing arm - Top heater with 5 temperature control circuits using pilot burners - Bottom heater with 3 temperature control circuits using pilot burners - Height-adjustable top heater - Powered, parallel lifting film transport Lrsdjwf Dtxjpfx Adkoi - Film transport via pin chain - Film guidance via rollers - Automatic transport width adjustment - Powered sheet lifter with automatic tool clamping - Mobile sheet loading trolley Options (price on request): - Pyrometer in top heater for measuring foil temperature - Retrofit for roll material processing

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Plate size: 1250 x 1500 mm Forming area: 1200 x 1460 mm Lredpswf Ea Tofx Adksi Draw depth: 700 mm If you would like further details or a quotation, please feel free to contact us.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Technical specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Equipment: Forming Station - Schleicher P03 control system - Automatic setup function - Upper ceramic heater (500 W) with 4-zone control - Individually selectable upper heating elements, including lowering function - Lower ceramic heater (300 W) with 4-zone control - Individually selectable lower heating elements, including lowering function - Program and heating setting storage capability - Clamping frame with quick-change system - Upper frame parallel, longitudinal beams for use with fixed-format frames - Lower clamping frame for bottom frame insertion, central clamping via electric motor - Lower table pneumatically operated, rapid/creep speed adjustable in 15 steps via control panel - Upper plunger rapid/creep speed adjustable in 7 steps - Vacuum pump with cascade control, adjustable in 15 steps via control panel - Pre-blow function adjustable as a percentage - Pre-suction function adjustable as a percentage - Automatic demolding function adjustable as a percentage - Plate sag control via light barrier with supporting air - 8-fold cooling fan with spray nozzle cooling - Large front opening for easy tool change Lodpfx Aswf Eb Rjdkori Feeding - Automatic sheet feeding device - Centering table for precise positioning of sheets in the feed system - Motorized sheet lifter - Motorized sheet positioning adjustment - Motorized transport lifter - Motorized transport width adjustment

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Plate size: 1000 x 1500 mm Ljdjwf D S Uspfx Adkeri Moulding area: 960 x 1460 mm Draw depth: 600 mm If you would like further details or a quotation, please feel free to contact us.

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 191, vrsta vhodnega toka: trifazni, pritisk: 10 letvica, skupna širina: 3.050 mm, skupna dolžina: 2.400 mm, skupna višina: 3.480 mm, širina krmilne omare: 850 mm, višina krmilne omare: 1.800 mm, dolžina elektro omare: 600 mm, This machine was overhauled, installed at a customer site, and commissioned in 2020, but has seen little to no use. The machine is in excellent condition. It has been professionally disconnected and transported. Lrodpfx Aowpfrkjdkei

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, obratovalne ure: 80.188 h, številka stroja/vozila: 322, Max. film width 700-800 mm Equipment / further details: - GREINER STACKING / Transfer unit R3 (Ref. No.: 95002.24) // M. No.: 00020 // Year: 1998 Top and bottom heating Materials processed: PS and PP 450 cycles PS // 350 cycles PP The following tools have been used on the machine: Ljdpfxoq Nn Hcs Adkori 8-cavity tool, Ø95 mm; 15-cavity tool, Ø73 mm; and 15-cavity tool, Ø86 mm The machine has mainly been used for manufacturing packaging for the dairy industry. Cycle speed is 18-25 cycles, depending on cup weight.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, obratovalne ure: 38.907 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 256, vrsta vhodnega toka: trifazni, Na prodajo je blistrirni stroj ILLIG HSA 50 RD, letnik 1989. Gre za visokozmogljiv pretočni varilni stroj za blistro embalažo s podajalnikom kartonov, debelina folije: 150µm-600µm. Linija se prodaja vključno s termoformirno postajo (trenutno odklopljena, saj je nismo uporabljali). Hitrost 5-18 ciklov/min. Na primer, hitrost blistriranja šmink ~16.000 kosov embalaž/8h. Dimenzije brez formirne postaje: 465x115 cm + 68 cm izložna postaja (trenutno demontirana) Maksimalno varjenje 1 paletke 50x30 cm Maksimalni format paletke 57x35 cm Stroj je v celoti delujoč, ves čas v proizvodnji. Možnost ogleda pred nakupom. POLJSKA Ledoywhxcopfx Adksri

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, obratovalne ure: 41.685 h, Technical data: Rated power, kW: 11.3 Forming area, mm: 475 x 250 Max. film width, mm: 495 Ledpjq A Um Rsfx Adksri Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. draw depth (negative), mm: 100 Cycles/min (min.-max.): 48 Air consumption/cycle at 6 bar: 100 Nl (compressed air) Discharged thermal energy: With top heating approx.: 10,260 KJ/h With top and bottom heating approx.: 17,715 KJ/h Special equipment: Hollow floor device available Control cabinet: included

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Ponujamo ILLIG HSA 30 RD – visokozmogljiv avtomatski stroji za tesnjenje pretisnih omotov: blister folije: PVC, PET APET/PETG, PS, debelina folije: 150µm-600µm, materiali za pokrove: lepilni karton, aluminijaste kompozitne folije, Tyvek, maksimalno področje tesnjenja X/Y približno 500mm/300mm, maksimalna globina vleka približno 100mm, 8-18 ciklov/min. Ogled možen po dogovoru. Lrsdpjylbrkjfx Adkei

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tehnični podatki: • 4-postajna rotacijska miza • Največja zvarilna površina: 350 x 250 mm • Največja globina blistra: 70–100 mm glede na vrsto izdelka Lsdpfjfua Dcjx Adkeri • Sila varjenja: 12.800 N • Moč grelca za varjenje: 1,75 kW • Podajalec kartonske embalaže • Izmetalec embalaže • Enota za oblikovanje kartona • Kabel s CEE 16A vtikačem • Teža cca 750 kg Stroj je na voljo v vseh izvedbah: b, b-2, b-3, b-4.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, For sale here is an Illig SB 74 D, suitable for skin packaging, blister packaging is not possible. Lodpfx Aswpvbpjdkori Technical data available upon request.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Production: Illig Type: HSA 50C Lrsdpfx Ajuk Dwfodkoi The machine is incomplete and not operational! For spare parts only!!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1126, širina folije: 540 mm, vrsta vhodnega toka: trifazni, skupna širina: 1.710 mm, skupna dolžina: 3.070 mm, skupna višina: 2.520 mm, skupna masa: 838 kg, moč: 1,9 kW (2,58 KM), Oprema: Na voljo je tipska ploščica, Skinpack stroj, pakirni stroj, termoformirni stroj, vakuumski termoformirni stroj -Proizvajalec: Illig, skin pack stroj tip SK 74c -Širina folije: 540 mm -Valjčni transporterji: vsak največ 1000 x 560 mm -Delovna miza: dimenzije glej fotografije -Skupna moč motorja: 1,9 kW -Skupna grelna moč: 8,9 kW -Dimenzije: 3070/1710/H2520 mm 838 kg -Dodatna oprema: vključno 8 folij Ø290 x 540 mm 276 kg -Transportne dimenzije: 1710/1070/H2520 mm / 1200/800/H700 mm -Skupna teža: 1114 kg + 500 kg folije Lrjdpfoft Sccox Adksi