Termoformiranje nakup rabljenega (49)

Stanje: delavnici obnovljeno (rabljeno), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual loading): 12 mm Max. sheet thickness (automatic loading): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical Features: - Control: Siemens Simatic S7-300, OP 37 panel - Climate-controlled control cabinet - Top heater: 5 temperature control circuits via pilot radiators - Bottom heater: 5 temperature control circuits via pilot radiators Hfodpfx Afjwf Dvao Tsb - Individual emitter control for both top and bottom heaters - Parallel clamping frame - Pneumatically actuated locking of upper reduction frame - Locking of lower reduction frame via cylinder - 4 cooling fans - Adjustable vacuum under the table via cascade control - Adjustable pre-blow/demould function via cascade control - Large front opening for tool change - Film sag control using photocell with support air - Automatic tool change system Under-table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Top punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change tool clamping system Sheet feeding: - Automatic raising of the film transport chain by motor - Pneumatic quick-change system for suction plates - Motorized centering of plastic sheets - Separate vacuum pump for embossed material Optional retrofit: Preheating unit - Top heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Bottom heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Temperature control for top and bottom heaters via separate controllers in the BE control cabinet (temperature setting not via UA operator panel) Optional retrofit: Roll processing - Cross cutter and feeder rollers in loader - Roll stand RO 800

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, For sale: VIRO TNG-4 Vertical Block Moulding Machine Specification: • Year of manufacture: 2016 • Block dimensions: - Height: 4100 mm - Depth: 1300 mm - Width: 1040 mm - Total volume: 5.5 m³ • Cycle times: - Density 12-16 g/l: 20-22 blocks/hour - Density 17-19 g/l: 18-20 blocks/hour - Density 20-23 g/l: 16-18 blocks/hour - Density 24-28 g/l: 14-15 blocks/hour - Density 29-35 g/l: 12-14 blocks/hour • Filling system: - Silo capacity: 10 m³ - High-pressure suction blower: 11 kW - Filling diameter: 300 mm - Drive: hydraulic • Mechanics: - Hydraulic system: 15 kW - Mould extraction: hydraulic - Door movement: hydraulic • Electrical equipment: - Servo amplifiers: Mitsubishi - Frequency inverters: Mitsubishi - PLC: Siemens Simatic - HMI panels: Siemens Simatic Hfedpfx Afopwbmbj Teb - PC computer: Axiomtek The machine is manufactured in accordance with European standards; body annealed, mechanically machined and pressure-tested. Equipped with a maintenance platform with access aid and fall protection. In excellent condition. It is also possible to offer a complete production line (including installation, commissioning, and employee training). TAG: block mould, block-mould, blockmould, EPS, expandable polystyrene

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Konvekcijska toplotna omara / grelna peč / sušilna omara / sušilna peč Alltherm WS 3750 - 1.5 - E- 24l Toplotna omara ima dve ločeno nastavljivi komori. Maks. temperatura na komoro: 250 °C Približne mere: Leva komora: višina 167 cm x širina 131 cm x globina 91 cm Desna komora: višina 167 cm x širina 145 cm x globina 96 cm Približne zunanje mere celotne peči: dolžina 380 cm x višina 250 cm x globina 128 cm Leva komora je dodatno opremljena z opazovalnim oknom. Lokacija: Siegen _____ Veljajo naši splošni pogoji poslovanja; prodajalec ne odgovarja za napake pri pisanju ali prenosu podatkov. Hfsdpfx Afjwuqvrs Tob Podatke in fotografije nam je posredoval lastnik in jih odobril za objavo. Videz ponujenih artiklov ustreza starosti in prikazanim slikam. Tehnično stanje in obraba ustrezajo starosti ponujenih artiklov. Rabljeni stroji se prodajajo izključno pravnim osebam in brez garancije.

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), HEK GmbH VGO 200 S warming cabinet Dimensions (approx.): Width: 1035 mm Hfodpfx Afsg Hzqbo Teb Depth: 800 mm + 210 mm piping Height: 820 mm

Stanje: zelo dobro (rabljeno), Mobile plastifying unit for the press processing of thermoplastics Manufacturer: KMH Model: 60 S Hydraulics max. pressure: 150 bar Motor power: 16.5 kW Heating power: 8 kW 400 V Hfodpfx Asg H I Nxsf Teb Single STW 150/1-3-10-K Temperature control unit 3.9 kVA Heating capacity: 3 kW 380 V Hydraulic pump Complete factory closure, large selection of mezzanine floors, pallet racks, shelving racks, paternoster systems. High-quality industrial machinery, lathes, grinding machines, hand tools. More items – new and used – can be found in our shop! International shipping costs on request!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, širina folije: 1.640 mm, pritisk: 6 letvica, skupna širina: 5.406 mm, skupna dolžina: 6.840 mm, skupna višina: 3.808 mm, ogrevalna zmogljivost: 9 kW (12,24 KM), zmogljivost črpalke: 60 l/min, + 2x naprava za tlačno vodo do 95°C, za namizna orodja; 60 l/min zmogljivost črpalke, 6,3 kW hladilna moč, 9 kW grelna moč + Avtomatska regulacija ogrevanja + Popolnoma avtomatsko centralno mazanje + Polnilni stroj, standardno desno + Naprava za potiskanje oblikovanih delov Hodpfxoxmwl Ie Af Tjfb + Popolnoma avtomatsko centralno mazanje BSM + 2 nabiralnika za polnjenje + Hlajenje s stoječim centralnim ventilatorjem in 6 nastavljivimi izpusti + Strojni vmesnik za zunanjo napravo

Stanje: delavnici obnovljeno (rabljeno), Sheet size: 1000 x 1500 mm Hjdpfx Afswf D R Re Tsfb Forming area: 960 x 1460 mm Drawing depth: 600 mm If you would like more details or a quote, please feel free to contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: omejena funkcionalnost, Manufacturer: Breyer Extrusion Item: Die, 3-layer die 2300 mm 3-layer flat sheet die, 2,300 mm wide (die opening) Deckling device for one die (max. 500 mm) Feed-block / distribution block Year of manufacture: 2023 Original purchase price: EUR 365,500 Total original price: EUR 444,200 Main technical data of the die: Total throughput: approx. 700 kg/h Hfjdpfx Ajx A D Emof Tjb Designed for HDPE material Gross outlet width: 2,300 mm, adjustable via deckling Lip opening: 16 – max. 26 mm Heating: electric via heating cartridges 400 V / 50 Hz Die heating power: 137 kW Co-extrusion adapter heating power: 7.5 kW Comprises: - Die (main die body) with 3 channels - Co-extrusion adapter - Die body - Die lip body - Accessories / screws - Accessories for deckling and parts for co-extrusion adapter - Adjustment device accessories (Note: Photographs are from 2023) The die now shows signs of use and is stored dismantled. Heating system is included, but not installed. The die is located at 78224 Singen (Hohentwiel), Germany, with the manufacturer. Inspection is possible on site by appointment. Additional photos available on request. You are welcome to send us your price offer. Reasonable offers will be considered. For inquiries, please include your full contact details! Delivery may be possible for a fee. You are welcome to come and inspect the item on site. To do so, simply call and we will arrange an appointment. Small tip in advance: Become a 'FOLLOWER' of us here in the classifieds, so you will always see our current offers or new listings. The item originates from insolvency proceedings and therefore shows signs of use. Maintenance and professional cleaning are the responsibility of the buyer. The sale is made without any warranty. Liability, reduction, or withdrawal from sale are expressly excluded. Prior inspection is recommended, as the item is sold as inspected. All information and details are provided without guarantee. Errors and changes reserved. The item is sold as viewed on site, in used condition, with retention of title and excluding liability for visible and hidden defects, especially technical, quality-related or performance-related defects and usability. Due to time constraints, we will only respond to serious inquiries and price offers! This is an advertisement for information purposes only. Inspection only by appointment! Kind regards, Leipziger Sicherstellungs- und Verwertungs GmbH R. Raum, Tel. +49 152 31381635

Stanje: dober (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Oven for Plastics Processing The oven is capable of processing thermoplastics. Hodpowp Em Uefx Af Tjfb Manufacturer: Reinhardt Model: VL Year of manufacture: 1991 No.: 8182 Connected load: 50.2 kW Voltage: 380 Volt Operating temperature: 50 – 200 °C Trolley approx.: 2000 x 1200 mm (W x D) x 500 mm opening

Stanje: dober (rabljeno), Leto izdelave: 2011, Proizvajalec: WM Model: FC 780E Leto: 2011 Stanje: Odlično Približno delovnih ur: 25.390 Postaje: oblikovanje, rezanje in zlaganje Največja velikost orodja: 780 x 570 mm Globina vleka: 130 / 130 mm Največja širina materiala: 810 mm Največja debelina plošče: 1,8 mm Največja sila zapiranja orodja: 20.000 daN Hjdpfxjttlzfs Af Tsfb Maksimalni cikli na minuto: 45 Tlačni tlak: 7 bar Vse podrobnosti se lahko spremenijo in/ali vsebujejo napake. Vsa oprema je na voljo in/ali podvržena predhodni prodaji.

Stanje: zelo dobro (rabljeno), COTEC Type: HCS 100 P-UH COTEC HCS 100 P-UH – Hydrophobic Coating System / PVD System For sale is a COTEC HCS 100 P-UH, a fully automatic hydrophobic coating system for industrial applications. The unit is ideal for the production of high-quality, abrasion-resistant, and transparent hydrophobic and oleophobic coatings on glass, plastic, or metal. Areas of application: - Optics (e.g., eyeglass lenses, precision optics) - Display and electronics industry - Medical technology - Automotive and supplier industry - Consumer goods and decorative surfaces Technical data & features: - Model: COTEC HCS 100 P-UH - Process time: approx. 12 minutes per batch - Capacity: up to 110 substrates Ø 70 mm (2 racks) - Internal chamber: Ø 600 × 540 mm - Heated chamber up to 65 °C Hfsdpfxjw Tbvre Af Tsb - Fully automatic process control (PLC) with 19″ operation unit - Vacuum system with integrated evaporator for DURALON materials - Uniform coating even for complex 3D geometries - No post-treatment required - Weight: approx. 300 kg - Condition: used Scope of delivery: (see picture) (Technical data, descriptions, and specifications subject to change and errors!) For further questions, please contact us by phone.

Leto izdelave: 2019, Stanje: novo, številka stroja/vozila: BI3, Tempering oven for stress-relieving annealing and forming of acrylic glass Hfjdpfx Afeb Nzyco Teb The oven features two doors on one side and two narrow doors at the rear, equipped with a rail system. Panels are suspended in the oven and clamped or released pneumatically via a foot pedal. - The oven offers a maximum temperature of 230°C and maintains a consistent deviation from the setpoint temperature of +/-3°C at 75°C. - Internal dimensions: approx. width 1600 x depth 2000 mm. The rail system allows for free-hanging panels with a height of up to 1800 mm. - The rail system can be seen in the attached images and may also be installed on the front side. It accommodates panel thicknesses from 1.5 to 25 mm and supports a maximum panel weight of 150 kg. - Heating power is adjustable in multiple stages. - Air circulation approx. 3,000 m³/h - Doors can also be opened from the inside for safety reasons - Safety device shuts down the heater in case of fan failure.

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, širina folije: 1.500 mm, Technical specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum draw depth: 700 mm - Maximum material thickness: 12 mm Features: Forming station - Siemens S7 control system - Fully automatic setup function - Top heating with 7 pilot emitters, adjustable via S7 touchscreen & joystick (motorized travel) - Bottom heating with 7 pilot emitters, adjustable via S7 touchscreen & joystick (motorized travel) - Contactless emitter control (solid state relay) - Synchronous upper platen system (hydraulic adjustment) - Clamping frame (hydraulic adjustment) - Tooling table (hydraulic adjustment) - Central cooling via fresh air supply - Triple film sag detection with automatic air support function - Triple tool monitoring - Automatic air box evacuation - Quick-change system for mold, clamping frame, and pre-stretch plug, with fully and semi-automatic sequence - Mold tool extendable on front flap - Forming vacuum monitoring - Pre-blow automation via pre-blow time - Automatic basic setting with self-optimization of emitter temperatures - Heating, cooling, and cycle times - Cycle time calculation for all expansion stages - Position measuring system for table location - Clamping frame, upper platen, and tool temperature control - Storage of programs and heating settings - Lower clamping frame for frame installation from below, central clamping via electric motor - Cascade for vacuum, pre-blow, demolding, tooling table, upper platen - Adjustable speeds for tooling table, upper platen, and clamping frame - Pneumatically lockable front door - Main switch cabinet climate control Automatic sheet and roll feeding - Film unwind stand including loading aid and pneumatic brake - Automatic sheet magazine centering (motorized adjustment) - Top heating usable as preheating or final heating (motorized travel) - Bottom heating usable as preheating or final heating (motorized travel) - Motorized sheet lifter - Vacuum pump for textured material - Material transport via transport chain and roller rail for improved handling, even with thin materials Options available on request. Hsdpfxjft S Eae Af Tsfb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Profilna krivilka model 17-PB-00 znamke FUX, Avstrija, v odličnem stanju. Hfedpfx Afjx Dq T Hj Tsb Suha obdelava (brez olja), z ogrevanjem na vroč zrak, primerna za krožne in ločne PVC profile za okna, vrata ter fasadne elemente. Stroj je sestavljen iz treh delovnih enot, kot je prikazano na fotografijah, ki skupaj tvorijo popolno linijo za krivljenje PVC profilov v krožne in ločne oblike. Uporaba: krivljenje krožnih/ločnih PVC profilov Postopek: suha obdelava z vročim zrakom (olja ni potrebno) Tri integrirane delovne enote za segrevanje profila, oblikovanje in manipulacijo V zelo dobrem delovnem stanju, takoj pripravljena za uporabo v proizvodnji Prevoz / dostava: Stroške prevoza nosi kupec. Pošiljka bo urejena po dogovoru, da se izbere najprimernejši način transporta in odprem. Za dodatne tehnične podatke, fotografije ali za dogovor o ogledu nas kontaktirajte preko elektronske pošte.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 589-0263, Proizvajalec: Illig Model: VHW 60/2 Leto: 2001 Hjdpfxouzi I Ee Af Tjfb Stanje: Dobro Število grelnih valjev: 2 Največja širina materiala: 610 mm Največja debelina materiala: 1,8 mm Najvišja temperatura grelnih valjev: 140 °C Ovitje materiala: 563° Skupna priključna moč: 36,0 kW Dimenzije: 2300 x 1400 x 2400 mm (D x Š x V), teža: 300 kg Vse informacije so informativne in se lahko spremenijo. Vsa oprema je na voljo do prodaje oziroma predhodne prodaje.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Plate size: 2000 x 1000 mm Forming area: 1960 x 960 mm Draw depth: 600 mm Hedpfxewf Ebwj Af Tefb If you would like more details or a quotation, please feel free to contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Proizvajalec: Gabler Model: M92 L Leto izdelave: 2006 Stanje: Zelo dobro Inventarna številka: 00006 Maksimalna oblikovalna površina: 750 x 436 mm Globina vleka: 150 mm Hfodpfx Asw Rpzqjf Teb Maksimalna širina materiala: 835 mm Maksimalno število ciklov/min: 44 Maksimalna sila zapiranja orodja: 350 kN Maksimalna moč zgornjega grelca: 81,90 kW Maksimalna moč spodnjega grelca: 54,60 kW Obratovalni zračni tlak: 8 bar Priključna napetost: 230V 50Hz Skupna priključna moč: 138,66 kW Približne dimenzije: 7.925 x 5.320 x 3.900 mm (D x Š x V) Približna teža: 10.400 kg Opomba: Vse podrobnosti so lahko predmet sprememb in/ali napak. Vsa oprema je na voljo po razpoložljivosti in/ali predhodni prodaji.

Stanje: delavnici obnovljeno (rabljeno), Top heating with small individual radiant heater controlled by toggle switch Bottom heating with large radiant heater Hsdpfefug Anjx Af Tefb Upper punch system Protective grid 4 cooling fans type D05 Pre-blow and automatic demoulding system

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Znamka Illig Model RV 74 Leto 1999 Ure Približno TBC Dobava Takoj Postaje Oblikovanje, rezanje in zlaganje Največje območje oblikovanja 700 x 500 mm Najmanjše območje oblikovanja 400 x 250 mm Globina vleka zgoraj/spodaj 120 / 40 mm Največja debelina materiala 2,0 mm Največja delovna hitrost 20 / min Skupna teža 6.600 kg Hedpfx Aoxp H Nuef Tjfb Vsi podatki so predmet sprememb in/ali napak. Vsa oprema je na voljo do razprodaje.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Max. forming area: 960 x 660 mm Min. forming area: 269 x 444 mm Max. sheet thickness manual loading: 12 mm Max. sheet thickness automatic loading: 10 mm Max. tool height: 450 mm Year of manufacture: 2000 Hjdpewf Dtxsfx Af Tsfb Technical equipment forming station UA 101 L: - Siemens control system with swiveling operator panel - Powered movement of top and bottom heaters via swing arm - Top heater with 5 temperature control circuits using pilot burners - Bottom heater with 3 temperature control circuits using pilot burners - Height-adjustable top heater - Upper punch unit - Parallel clamping frame - Automatic window plate adjustment lower frame - Automatic window plate adjustment upper frame - Under-table vacuum adjustable via cascading control - Pre-blow/demoulding adjustable via cascading control - 4 cooling fans - Front opening for tool change, pneumatically locked - Sag control for film - Pre-blow control for film - Vacuum preparation at top punch - Temperature control connection - Automatic tool changing system, major tooling change - Vacuum pump Technical equipment feed system BE 101 L: - Upper and lower pre-heating - Powered movement of top and bottom heaters via swing arm - Top heater with 5 temperature control circuits using pilot burners - Bottom heater with 3 temperature control circuits using pilot burners - Height-adjustable top heater - Powered, parallel lifting film transport - Film transport via pin chain - Film guidance via rollers - Automatic transport width adjustment - Powered sheet lifter with automatic tool clamping - Mobile sheet loading trolley Options (price on request): - Pyrometer in top heater for measuring foil temperature - Retrofit for roll material processing

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Blagovna znamka: Kiefel Natureformer Model: KFT 90 Speed Leto izdelave: 2022 Stanje: Novo – Stroji so neodprti in še vedno v originalni embalaži proizvajalca Kiefel. Območje oblikovanja: 900 x 600 mm (35,5 x 23,5 inča) Maksimalna višina oblikovanega izdelka: 120 mm (4,75 inča) Hodswkkpqepfx Af Tefb Prebijalna sila: 600 kN Maksimalna masa odmerka: 300 g (10,5 oz) Ciklus: 15 sekund +/- Prikazana slika stroja je simbolična. Stroj ni bil nameščen.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Plate size: 1250 x 1500 mm Forming area: 1200 x 1460 mm Draw depth: 700 mm Hsdpjwf Ea Tjfx Af Tjfb If you would like further details or a quotation, please feel free to contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 1.615 h, Funkcionalnost: popolnoma funkcionalen, Proizvajalec Kiefel Model KMD 78.1 PR Leto 2022 Stanje Odlično Rok dobave Takoj Približno število ur 1615 Postaje Štiri Največje dimenzije orodja 780 x 600 mm Največje oblikovalno območje 760 x 580 mm Hfedoxwwf Nspfx Af Tsb Minimalno oblikovalno območje 375 x 350 mm Debelina plošče 0,2 - 1,8 mm Globina vleka 150 mm +/- Maks. širina folije 810 mm Sila rezalne postaje 500 kN Sila postaje za izsekavanje 300 kN Obratovalni tlak 6 bar Maks. suhi cikli / min 40 Vse informacije so lahko predmet sprememb in/ali napak. Vsa oprema je na voljo do razprodaje ali predhodne prodaje.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Technical specifications: - Maximum material size: 2500 x 1500 mm Hsdpewf Eb Rsfx Af Tofb - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Equipment: Forming Station - Schleicher P03 control system - Automatic setup function - Upper ceramic heater (500 W) with 4-zone control - Individually selectable upper heating elements, including lowering function - Lower ceramic heater (300 W) with 4-zone control - Individually selectable lower heating elements, including lowering function - Program and heating setting storage capability - Clamping frame with quick-change system - Upper frame parallel, longitudinal beams for use with fixed-format frames - Lower clamping frame for bottom frame insertion, central clamping via electric motor - Lower table pneumatically operated, rapid/creep speed adjustable in 15 steps via control panel - Upper plunger rapid/creep speed adjustable in 7 steps - Vacuum pump with cascade control, adjustable in 15 steps via control panel - Pre-blow function adjustable as a percentage - Pre-suction function adjustable as a percentage - Automatic demolding function adjustable as a percentage - Plate sag control via light barrier with supporting air - 8-fold cooling fan with spray nozzle cooling - Large front opening for easy tool change Feeding - Automatic sheet feeding device - Centering table for precise positioning of sheets in the feed system - Motorized sheet lifter - Motorized sheet positioning adjustment - Motorized transport lifter - Motorized transport width adjustment

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Plate size: 1000 x 1500 mm Moulding area: 960 x 1460 mm Draw depth: 600 mm Hfodpfowf D S Uox Af Tob If you would like further details or a quotation, please feel free to contact us.