Fp1 nakup rabljenega (162)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Digital Readout K&C, infinitely variable feed, painted in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable 100 mm on column >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout K&C newly installed with manufacturer's warranty and operating manual. Display unit: Reference points, zero setting, coordinate input, mm/inch switch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: Predpet Aav Iofx Aafoc For sale is a universal milling machine Deckel FP1 in very good condition. The machine has very little backlash and all spindles move smoothly. All bellows have been replaced. On this newer FP1 model, feed is infinitely variable on two axes; the machine is also equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically inspected. The new K&C digital readout makes working easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Universal milling machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1984 – overhauled, newly painted, Prjdpjchfyfefx Aafec RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2101-1067 Milling head type: 2171 Milling head no.: 1086 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X and Z axes - Fixed table 600 x 200 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant device - Operating manual - used, as seen -

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 2-axis active digital display (Heidenhain) Spindle mounting: SK40 (S20x2) Predpevnr Hyofx Aafjc Travel distances: X 300 / Y 160 / Z 340 mm Spindle speed: 40 - 2000 rpm (2 gearbox stages) Feed infinitely variable adjustable The machine is in well-maintained condition and can be inspected under power on site. Includes extensive accessories: - Machine vise - Operating manual / electrical circuit diagram / spare parts list - Collet set (S20x2) incl. SK40 collet chuck - Additional accessories available on request.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, Dear Sir or Madam, Pedpfxeuw Uu No Aafjrc We are pleased to offer a Deckel FP1 3-axis milling machine, equipped with retrofitted safety features. These newer models come with central lubrication, an electric coolant pump, and a brake motor as standard. Additionally, thanks to the Harting connector, the control cabinet can be disconnected from the machine in no time. The connection of all safety components to the control cabinet is also implemented with this connector type, ensuring that handling remains user-friendly. We provide a 12-month warranty on all retrofitted safety devices, which we can supply for any machine model! The electronic spindle guard is adjustable across multiple axes and is designed to prevent access to the working spindle while also protecting against hazards such as flying chips, coolant, etc. The electronic spindle safety cap is intended to prevent interference with the rotating spindle stub, including the tool clamping area. Delivery time: on request Year of manufacture: 1989-1992 Machine no. 2102-xxxx Table: fixed angle table Travels: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1,200 mm/min Features and accessories: coolant device, central lubrication, manual, machine feet, electronic spindle guard, electronic spindle safety cap Our service promise to you: - We are a certified master engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we will completely or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories, such as additional safety equipment - We are happy to handle shipping and/or installation for you

Leto izdelave: 1990, Stanje: dober (rabljeno), Various collets and holders, approx. 300 pieces. For DECKEL milling machines FP1, FP2, FP3, FP4. Individual sale upon request. Prjdpohvz Iijfx Aafec

Stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, položaj glave za glodanje: SK40, vhodna napetost: 400 V, Deckel FP1 2-axis Active Travels: Pjdpjvuzg Aefx Aafsrc X = 300 mm Y = 160 mm Z = 340 mm Spindle speed 40-2000 rpm Automatic feed and rapid traverse on the X, Y and Z axes. Infinitely variable control. Table size 600 x 260 mm 2-axis Aktiv control, point-to-point operation. 3-axis digital readout by Heidenhain. Spindle taper SK40 Deckel (external thread).

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 3-axis active digital display (Heidenhain TNC113) Spindle taper: SK40 (S20x2) Pjdpovnrz Rofx Aafsrc Travel: X 300 / Y 160 / Z 340 mm Spindle speed: 40 - 2000 rpm (2-speed gearbox) Feed rate steplessly adjustable The machine is in well-maintained condition and can be inspected under power on site. Including extensive accessories: - Machine vice - Operating manual / electrical schematic / spare parts list - Collet chuck set (S20x2) including SK40 collet chuck adapter - Additional accessories available upon request.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly notable for its ease of operation. This newer model from 1989 features, among other things, central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. As part of the partial overhaul, the following work was carried out, among others: Pjdpfx Aspy Eldjafsrc - Spindle bearings in the milling head replaced - Repainted - Various standard parts such as handles, oil sight glasses, switches, etc. replaced - Worn parts such as drive belts replaced - Way covers partially replaced - Gib strips adjusted - And much more... Delivery time: immediate Year of manufacture: 1989 Machine No.: 2102-xxxx Table: rigid angle table Travel: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1,200 mm/min Features & accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and worn parts, if necessary, are replaced in advance - Upon request, we can completely or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange shipping and/or installation

Stanje: novo, Leto izdelave: 2025, Schiatti Angelo BFP12 double-sided straight-line grinding machine with arris Podpfowd Hbisx Aafjrc Max. working width: 1,300 - 4,500 mm Flexible machine configuration: 5 / 6 / 8 / 9 / 10 / 11 spindles - Glass thickness: 3–35 mm - Minimum working width: 160 mm - Max. loading weight: 480 kg - Automatic thickness adjustment via PLC control - Collection tray for process water - Including transfer stations

Stanje: delavnici obnovljeno (rabljeno), Deckel FP1 AKTIV (3-axis Aktiv) Machine no. 2102-5745 Year of manufacture: approx. 1988 Travels: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Features: - Aktiv digital readout for 3 axes (HEIDENHAIN TNC 113) - Infinitely variable feed in X, Y, and Z axes - Quill traverse at vertical milling head: 60 mm - Vertical milling head is swiveling and extendable horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically tested. Upon request, videos of the geometry can be provided. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Deviation parallelism Y-axis: 0.002 mm (measuring length 150 mm) Deviation parallelism X-axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Central lubrication system checked - Heidenhain digital display overhauled - Set of scrapers installed - LEDs in Aktiv display replaced - Oil change Prjdpfxsxpwfgj Aafjc - Vertical milling head re-bedded - Oil sight glass replaced Net price ex works, loaded from stock

Stanje: novo, Leto izdelave: 2024, Condition: new Year of manufacture: 2024 Stock number: 7296 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 In stock: 1 Podpewiqq Sofx Aaferc Press force: 100 t Nominal press force (at 4.5 mm): Table length: 700 mm Table width: 1000 mm Pass-through hole in table: 210 mm Stroke: 1 - 132 mm Strokes per minute: 58 Ram guides: 6 Ram adjustment: 90 mm Ram bore: 60 mm Throat depth: 300 mm Shut height: 445 mm Motor: 7.5 kW Length: 1,650 mm Width: 1,545 mm Height: 3,011 mm Weight: 7,000 kg Welded steel frame construction Crankshaft made of AISI4140 (42CrMo4), ground Bronze bearings, SnBz-12 6-way ram guidance Pneumatic clutch-brake combination 7" touchscreen Pneumatic ram compensation Drive gears running in oil bath PLC for safety functions Work area secured by light curtain Motorized ram adjustment Mechanical overload protection Two-hand and foot pedal operation Adjustable stroke rate (inverter) Automatic central lubrication Machine and equipment in accordance with CE regulations (Sample images) OPTIONS: - Vibration pads: €192.00 - Clamping plate: €2,580.00

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ZD-QFP18, skupna širina: 4.600 mm, skupna dolžina: 16.000 mm, skupna višina: 2.600 mm, dolžina rezanja (maks.): 1.200 mm, vrsta vhodnega toka: Enosmerni tok, skupna masa: 24.000 kg, FANBANG- Jianshe stroj za proizvodnjo sukanih papirnatih ročajev z opcijo Turn top J fold. Ta naprava je zasnovana za izdelavo papirnatih vrečk s kvadratnim dnom in ročaji iz poljubnega (nepotiskanega ali potiskanega) papirja v listih. V kombinaciji s strojem za izdelavo ročajev omogoča povsem avtomatski proces: izdelava ročajev, prilepitev ročajev, zlaganje vrha vrečke, stransko lepljenje, oblikovanje cevi, vtiskovanje dna, lepljenje dna, oblikovanje dna ter zbiranje končnega izdelka. Gre za idealno opremo za izdelavo papirnatih vrečk za živila, nakupovalnih vrečk ipd., možno je izdelovati vrečke različnih velikosti. V ustreznem območju papirja je zmogljivost do 60 kosov/minuto ali več. Povečana enota proizvodne zmogljivosti in višji dobiček. Popolna ohišja zagotavljajo varnost operaterja. Pjdpfx Asxn Skusaforc

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT6044-4AF71-4EB5 sinhronski servomotor SN:YFP119050101003, rabljen, z običajnimi sledmi uporabe, 100 % delujoč, dobava v skladu s fotografijami. Podpei D Tg Sofx Aafsrc

Stanje: dober (rabljeno), Leto izdelave: 2008, Ilpra Foodpack FP1402 V/G Serijska št.: FP6854 (2008) – avtomatski zapiralec pladnjev s plinskim mešalnikom GasMix GM Series, serijska št.: 2011/PA/00286 (2011), z orodjem za 3 pladnje v vrsti, zunanji mere 180 x 250 mm, vključno z Busch vakuumsko črpalko, vozičkom za dvigovanje navitja folije, stenskim transformatorjem in štirimi dodatnimi kompleti orodij (vključno z: 3 v vrsti 180 x 250 mm, 3 v vrsti 180 x 280 mm, 3 v vrsti 165 x 200 mm). FoodPack 1402 je popolnoma avtomatska linijska zapirnica pladnjev, primerna za srednje do visoke proizvodnje. Zasnovana je za enostavno integracijo v avtomatizirano proizvodno linijo in omogoča prilagoditev po specifičnih proizvodnih zahtevah. Odlikuje jo kompakten dizajn, FoodPack 1402 zagotavlja nizke obratovalne stroške in deluje v načinih lepljenja, vakuuma ali zaščitne atmosfere. • Higiena in dostopnost: zaradi izvedbe iz nerjavečega jekla in skladnosti z zaščitnim razredom IP65 je FP 1402 primerna za uporabo v agresivnem okolju. Delovne površine in rešetkasta vrata so zasnovani tako, da preprečujejo zastajanje vode ali tekočin. Pregledi in čiščenje stroja so izjemno enostavni in hitri. • Visoka tehnologija: menjava orodja je hitra in preprosta; stroj 1402 je takoj pripravljen za pakiranje različnih formatov. Stroj ima barvni zaslon na dotik s preprosto in uporabniku prijazno programsko opremo (možen shranjevanje do 40 različnih delovnih menijev). Pjdpfx Aaeu Tugzoforc • Kompakten dizajn: 100 m3 vakuumska črpalka je vgrajena v notranjost stroja, kar dodatno zmanjšuje skupne dimenzije. • Prilagoditev: po naročilu je na voljo široka paleta opcij za čim boljše prilagajanje zahtevam stranke. Glavni tehnični podatki Dimenzije stroja (mm): 4950 x 900 x 1440 Teža stroja (kg): pribl. 750 Vgrajena moč (kW): 6 kW, 400 V, 50 Hz Poraba zraka (bar – Nlt/cikel): 6 bar – 50 l/cikel Varilno območje (mm): 400 x 270 x 120 Zmogljivost: največ 15 ciklov/min Zaščitni razred: IP 65

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 1.020 mm, stružna dolžina: 4.000 mm, premer struženja: 700 mm, izvrtina vretena: 130 mm, Proizvajalec: GIANA Model: GFP 12 Leto: 2000 Višina med stružnicami: 510 mm Razdalja med konicama: 4.000 mm Največji Ø nad suportom: 700 mm Psdpoxhqa Ujfx Aafsrc Največji Ø nad ležiščem: 1.020 mm Širina ležišča: 560 mm Največja teža med konicama: 6.000 kg Moč vretena: 40 kW Hitrosti vretena: 8 ÷ 1.582 obr/min Premer vretenine: 130 mm Konica konjička: 125 mm Hod konice konjička: 300 mm Revolverska glava: 12 pozicij + 6 pozicij za pogonsko orodje Transporter za odrezke

Stanje: rabljeno, Leto izdelave: 2018, Uporabljeni polnilni monoblok za pivo, 800 steklenic/uro Struktura monobloka Uporabljeni polnilni monoblok za pivo 800 bph je sestavljen iz treh ločenih enot: avtomatskega splakovalnika, izobarnega polnilnika z dvojnim vakuumskim sistemom in zamašnika za kronske zamaške. Ta konfiguracija optimizira upravljanje faz izpiranja, polnjenja in zapiranja. Sistem je tako primeren za obdelavo piva v 0,5-litrskih steklenicah. Modularna zasnova olajšuje vzdrževanje in zamenjavo posameznih komponent, s čimer se poveča zanesljivost delovanja. Rotacijski splakovalnik ZPC-12 Splakovalnik v uporabljenem polnilnem monobloku za pivo 800 bph deluje z neprekinjenim rotacijskim sistemom in ima 12 prijemnih klešč. Delovni cikel vključuje vstop steklenice, notranje izpiranje z obdelano vodo, kapljanje in izstop. Stroj obdeluje steklene steklenice višine od 150 do 330 mm in premera od 50 do 90 mm ter doseže zmogljivost 600 do 800 steklenic na uro. Vgrajeni motor ima nazivno moč 1,5 kW. Konstrukcija omogoča hitre menjave stekleničnih formatov ter tako povečuje prilagodljivost proizvodnje. Izobarno polnjenje z dvojnim vakuumom Polnilna enota BFP-12, srce uporabljenega polnilnega monobloka za pivo 800 bph, vključuje 12 polnilnih ventilov in omogoča izobarni postopek z dvojnim vakuumom. Sistem izvede dva cikla evakuacije in ponovno vbrizgavanje CO₂ pred samim polnjenjem, kar močno zmanjša preostali kisik in ohranja kakovost piva. Podpira prostornino steklenic od 250 do 1000 ml. Enota ima integrirane ključne komponente, kot so črpalka Southern, PLC krmilnik Mitsubishi, zaslon na dotik THINEDA, korejske senzorje ter pnevmatski sistem AUTONICS. Tudi ta stroj poganja motor z močjo 1,5 kW. Električni vmesnik omogoča sprotne nastavitve in tako izboljšuje natančnost v proizvodnem procesu. Stroj za zapiranje s kronskimi zamaški ZDS-3 Pedjw Tlz Espfx Aaferc Zamašnik za kronske zamaške v uporabljenem polnilnem monobloku za pivo 800 bph nanaša kovinske kronske zamaške na steklene pivske steklenice. Stroj ima 3 glave za zapiranje in deluje v neprekinjenem rotacijskem načinu. Obdeluje steklenice do višine 330 mm in zamaške premera od 20 do 30 mm (velikost cP), ki ustrezajo običajnemu evropskemu vratu steklenice. Zamašnik doseže zmogljivost do 1500 steklenic na uro, kar zagotavlja zalogo in preprečuje ozka grla za polnilnikom. Glede na standardne zamašnike ta model omogoča večjo natančnost zapiranja in stabilnost zamaškov. Njegovo robustno ogrodje zmanjšuje vibracije pri visoki hitrosti delovanja. Električne značilnosti in kompatibilnost Stroji v uporabljenem polnilnem monobloku za pivo 800 bph uporabljajo zanesljive in industrijsko standardne električne komponente. Skupna poraba znaša približno 4,5 kW, zato je sistem primeren za obrate s srednjo električno kapaciteto. Sistem je namenjen izključno polnjenju 0,5-litrskih steklenic za pivo. Med delovanjem polni pod nadzorovanim tlakom, kar ohranja vsebnost CO₂ in končno stabilnost izdelka. Celoten sistem zagotavlja zanesljivo delovanje, minimalen vnos kisika in odlično kakovost pakiranja. Kompaktna zasnova poenostavlja vgradnjo tudi v omejenih prostorih.

Stanje: novo, Leto izdelave: 2025, Zustand neu Baujahr 2025 Lagernummer 070095 Lieferzeit ca. 14 - 16 Wochen ab Auf Ursprungsland Türkei Preis 20100 € Leasingrate 385,92 € Presskraft 10 t Nominalpresskraft bei 1,4 mm Tischlänge 270 mm Tischbreite 370 mm Durchfallloch im Tisch 100 mm Hub 1 - 40 mm Hubzahl 200 1/min Stößelführungen 4 Stößelverstellung 35 mm Zapfenloch im Stößel 25 mm Ausladung 160 mm Einbauhöhe 180 mm Motor 0,75 kW Länge 1170 mm Breite 1180 mm Höhe 1700 mm Gewicht 590 kg Geschweißte Stahlrahmenkonstruktion 4-fach Stößelführung Pneumatische Kupplungs-Bremskombination Lichtschranken Zwei Hand- und Fußpedalbedienung Manuelle Hubverstellung Manuelle Zentralschmierung Ausrüstung gemäß CE Vorschriften Optionen: Vibrationspads € 132,- Prjdpfswirqgsx Aafsc Aufspannplatte € 220,- Abbildung inkl. optional erhältlicher Aufspannplatte / picture incl. optional available bolster plate

Stanje: dober (rabljeno), Leto izdelave: 1989, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, fixed table, SK 40 M16 spindle taper. Good, operational condition. Can be demonstrated under power by arrangement. Pjdpfx Aetp Nyfoaferc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.400 mm, skupna dolžina: 13.000 mm, skupna višina: 1.700 mm, moč servomotorja: 13 W, skupna masa: 11.000 kg, širina papirja 550-1050 mm dolžina papirja 340-630 mm Pjdpfxjxcfzvj Aaforc g/m² papirja 100-250 g/m² širina vrečke 180-360 mm višina vrečke 240-480 mm dno vrečke 80-170 mm normalna hitrost 80 kos/min Skupna moč 13 kW skupna teža 11000 kg dimenzije stroja D13000 x Š2400 x V1700 mm

Stanje: rabljeno, Universal tool milling machine with active digital readout DECKEL Type FP 1 Universal Milling Machine Machine No. 2102 - 3322 Year of manufacture: 1986 Travel paths X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle taper SK 40 - S20x2 Spindle speeds 40-2000 rpm, 16 steps Prjdpfxor D T Uys Aafjc Feed on X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Active 3-axis digital readout HEIDENHAIN Type TNC 113 - Infinitely variable feed on the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on the vertical milling head: 60 mm - Vertical milling head swiveling and extendable horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray attachable to the machine base - Operating manual, electrical diagram, and spare parts list available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25.10.29, Fresan FP 130P - C-Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Capacity: 130 tons (1300kN) * Strokes per minute: 55 SPM (adjustable) * Distance between table and ram: 500 mm * Stroke adjustment: 0 - 132 mm * Motorized ram adjustment: 95 mm * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made of alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC ground for minimal surface friction. * Bronze bushings, SnBz-12 quality * Pneumatic clutch-brake combination * Fully enclosed helical gear transmission in oil bath * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * Six-way ram guidance with used-oil reservoir * 7-inch HMI touchscreen control panel * Adjustable stroke count with AC inverter * Motorized ram adjustment * Mechanical overload protection (Hydraulic protection can be retrofitted to standard machines after purchase) * Pneumatic counterbalance cylinders (ISO, 4 units) * Automatic central lubrication & used-oil reservoir (thin oil / slideway oil) OPTIONAL EQUIPMENT: * Extra clamping plate * Part ejector (upper and/or lower, mechanical or pneumatic) Podpfonyh Sisx Aaforc * Material feeding, loading and unloading systems (decoiler, straightening machine, pneumatic or servo feeder) * Custom-built machine

Stanje: novo, Stanje novo Dobavni rok pribl. 14-16 tednov od naročila Država izvora Turčija Cena 25.700 € Leasing rata 490,87 € Tlačna sila 15 t Prsdpfx Aajwirldjfsc Nazivna tlačna sila pri 1,4 mm Dolžina mize 320 mm Širina mize 490 mm Premer odprtine v mizi 130 mm Hod 1–40 mm Število hodov 200 1/min Vodila batnice 4 Nastavitev batnice 40 mm Premer odprtine na batnici 30 mm Vrat 200 mm Vgradna višina 215 mm Motor 1,5 kW Dolžina 1160 mm Širina 1180 mm Višina 1730 mm Teža 922 kg Varjena jeklena okvirna konstrukcija 4-kratno vodilo batnice Pnevmatska sklopka-zavorna kombinacija Svetlobne zavese Dvo-ročni in nožni upravljalnik Ročna nastavitev hoda Ročno centralizirano mazanje Opremljeno skladno s CE smernicami Slika vključuje opcijsko dobavljiv vpenjalni plato.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25.10.29, Fresan FP 160P - C-Frame Eccentric Press - 160 Tonnes (1600kN) TECHNICAL DATA: * Capacity: 160 tonnes (1600kN) * Stroke rate: 55 strokes/min (adjustable) * Distance between table and ram: 500 mm * Adjustable stroke: 0 - 172 mm * Motorized ram adjustment: 95 mm * Table dimensions: 800 x 1100 mm STANDARD FEATURES: * Equipment complies with CE regulations * Welded steel frame construction * Crankshaft made of alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bushings, quality SnBz-12 * Pneumatic clutch-brake combination * Fully enclosed helical gear transmission in oil bath * Press safety valve * Fail-safe PLC & safety switches & light barriers (Pilz) * Six-way ram guide with waste oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate with AC inverter * Motorized ram adjustment * Mechanical overload protection (hydraulic overload protection can be retrofitted to standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & waste oil collector (thin oil / slideway oil) OPTIONAL EQUIPMENT: * Extra clamping plate * Parts ejector (upper and/or lower, mechanical or pneumatic) * Material feeder, loading and unloading systems (decoiler, straightener, pneumatic or servo feeder) Pedpfx Asnyh S Reafjrc * Custom-built machine

Stanje: novo, Condition: new Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Press force: 160 t Nominal press force at 6 mm Table length: 750 mm Table width: 1100 mm Through-hole in table: 230 mm Stroke: 1 - 172 mm Strokes per minute: 45 Ram guideways: 6 Ram adjustment: 100 mm Pin hole in ram: 80 mm Throat depth: 375 mm Installation height: 540 mm Motor: 11 kW Length: 1890 mm Width: 1950 mm Height: 3650 mm Weight: 15,500 kg Welded steel frame construction Crankshaft made of AISI4140 (42CrMo4), ground Bronze bearings made of SnBz-12 6-fold ram guide Pneumatic clutch-brake combination 7" touchscreen Pneumatic ram compensation Intermediate gears in oil bath PLC for safety functions Working area protected by light curtain Motorized ram adjustment Mechanical overload protection Two-hand and foot pedal operation Psdswiqu Rjpfx Aafjrc Adjustable strokes per minute (inverter) Automatic central lubrication Machine and equipment according to CE regulations (Symbolic photos) Illustration incl. optionally available bolster plate OPTIONS: Vibration pads €192.00 Bolster plate on request Hydraulic overload protection on request etc.

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €83,200 Lease rate: €1,572.48 Press force: 130 tons Nominal press force at 4.5 mm Table length: 650 mm Table width: 950 mm Pjdswiqn Ropfx Aafjrc Table through-hole: 220 mm Stroke: 1 - 132 mm Strokes per minute: 50 Slide guides: 6 Slide adjustment: 95 mm Slide pin hole: 70 mm Throat depth: 325 mm Installation height: 500 mm Motor: 11 kW Length: 1800 mm Width: 1725 mm Height: 3020 mm Weight: 8000 kg Welded steel frame construction Crankshaft made from AISI4140 (42 CrMo4), ground Bronze bearings from SnBz-12 6-way slide guidance Pneumatic clutch-brake combination 7" touchscreen Pneumatic slide counterbalance Geartrain in oil bath PLC for safety functions Working area safeguarded with a light curtain Motorized slide adjustment Mechanical overload protection Two-hand and foot pedal control Adjustable stroke rate (inverter) Automatic central lubrication Machine and equipment in accordance with CE regulations (Symbolic photos) Illustration incl. optional available bolster plate OPTIONS: - Vibration pads: €192.00 - Bolster plate: on request - Hydraulic overload protection: on request etc.