IMA NOVIMAT I /G80/390/R3
IMA NOVIMAT I /G80/390/R3

Leto izdelave

2013

Stanje

Rabljeno

Lokacija

Nemčija

IMA NOVIMAT I /G80/390/R3 IMA NOVIMAT I /G80/390/R3

Prikaži karto

Podatki o stroju

Oznaka stroja:: IMA NOVIMAT I /G80/390/R3

Proizvajalec:: IMA

Model:: NOVIMAT I /G80/390/R3

Leto izdelave:: 2013

Stanje:: pripravljen za uporabo (rabljen)

Cena in lokacija

Lokacija:: , Nemčija

Pokliči

Podrobnosti ponudbe

ID oglasa:: A20704470

Referenčna številka:: DE-EDG-IMA-2013-00001

Posodobitev:: nazadnje dne 02.03.2026

Opis

This IMA NOVIMAT I /G80/390/R3 edge banding machine was manufactured in 2013. It is equipped with two 4.5 kW motors operating at 150 Hz, enabling speeds of up to 9,000 rpm. With an edge height of 14 to 65 mm and a roll diameter of up to 850 mm, it is ideal for precise edge banding applications. Take advantage of this opportunity to purchase the IMA NOVIMAT I /G80/390/R3 edge banding machine. Contact us for further information about this machine.

Additional information:

• Motor power: 2 x 4.5 kW, 150 Hz
• Motor speed: 9,000 rpm
• Power supply: 230 V
• Heating capacity: 6 x 500 watts
• Adjustment range: Vertical approx. 17 mm, horizontal approx. 30 mm
• Stroke: max. 8 mm
• Roll diameter: max. 850 mm
• Edge height: 14 - 65 mm
• Workpiece overhang: min. 30 mm + edge thickness, max. 80 mm including edge thickness
• Workpiece length: min. 130 mm
Gjdpsx D Nh Aefx Ad Asip
• Workpiece gap: min. 300 mm
• Workpiece distance: min. 990 mm
• Workpiece thickness: min. 8 mm, min. 12 mm with tracing wheel, max. 80 mm
• Single tracing workpiece overhang: min. 30 mm
• Double tracing system workpiece overhang: min. 38 mm for max. 4 profiles, max. 50 mm
• Cutterhead diameter: 125 mm
• Motor shaft: 30 x 68 mm diameter
• Internal thread: M16, depending on motor, left or right
• Cutting cross-section motor power: 0.20 kW, 200 Hz, 400 V, 12,000 rpm for max. 195 mm², option: 0.66 kW, expandable up to max. 1,100 mm²
• Tool diameter: 160 mm / 48 teeth
• Swivel range: 0 and 25 degrees
• Workpiece feed speed: max. 30 m/min for an edge cross-section of 3 x 45 mm
• Edge protrusion: upper edge, max. 3 mm; lower edge, max. 2 mm for straight edges
• Edge material: max. 4 mm for wood and plastic; aluminium, max. 3 mm

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2017

1.397 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 631 7... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Bergkamen

813 km

Rovoskopnalagalnik
NEW HOLLANDB 115 c

36.900 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Enostranski stroj za robove BRANDT - HOMAG AMBITION 1650 - TFU 140/R/20

Italija

514 km

Enostranski stroj za robove
BRANDT - HOMAGAMBITION 1650 - TFU 140/R/20

Pokliči

Mali oglas

Panelna krožna žaga HOLZMA HPL380/43/22/X HOLZMA Profi HPL380/43/22/X/NEW

Wioska

678 km

Panelna krožna žaga HOLZMA HPL380/43/22/X
HOLZMAProfi HPL380/43/22/X/NEW

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, HOLZMA PROFILINE HPL 380 Podatki o rezu in dvižni mizi Dolžina reza: 4.300 mm Velikost reza z dvižno mizo: 4.300 mm x 2.200 mm Mere plošče za avtomatsko podajanje (maks.): 4.300 mm x 2.200 mm Mere plošče za avtomatsko podajanje (min.): 1.200 mm x 400 mm Višine skladov Višina sklada na dvižni mizi ob postavitvi na ravni tal (maks.): 560 mm Višina sklada na dvižni mizi ob postavitvi v jami (maks.): 780 mm Gijdsx Nf Eqepfx Ad Aep Nosilnost dvižne mize (maks.): 4 t Valjčne tirnice Valjčna tirnica, 10-stezna: 1 kos Valjčna tirnica, 2-stezna: 6 kosov Vpenjalne klešče Razmiki: 75/275/475/1.075/1.825/2.625/3.425 mm Odsesovalne in zračne mize Pozicija odlagalne naprave: 2.375 mm Zračna miza z valji 2.160 x 800 mm: 1 kos Zračna miza z valji 2.160 x 650 mm: 3 kosi Centralni ventilator: 1 kos Razvodna cev za zračne mize: 70 x 70 mm

Poglej podrobnosti

Mali oglas

Euskirchen

786 km

Drobilnik
630 / 18,5 kW

13.990 €

Fiksna cena plus DDV

Pokliči

Stanje: novo, Leto izdelave: 2022, Shredding Machine 630 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 30 concave pieces, multiple reversible Rotor diameter: 260 mm Rotor design: EcoRings Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Screen perforation: 10 - 12 mm Extraction nozzle Ø 160 mm Gisdoku Abispfx Ad Asp

Poglej podrobnosti

Mali oglas

Francija

984 km

Vrnitev plošče
LIGMATECHZHR 01

Pokliči

Mali oglas

6559 - Panelna žaga HOLZMA HPP 380 HOLZMA HPP 380

Izdebnik

546 km

6559 - Panelna žaga HOLZMA HPP 380
HOLZMAHPP 380

48.900 €

EXW Fiksna cena plus DDV

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Dimenzije rezanja: 4300x4300 mm Giodpoylbdtjfx Ad Ajp Višina rezanja: 95 mm Pomik nosilca z prijemali: 90 m/min Hitrost rezanja do 150 m/min, brezstopenjsko nastavljiva Moč glavnega motorja: 13,5 kW Moč predrezovalnega motorja: 2,2 kW Premer žagine plošče: 350 mm 4 zračne mize Potreba po odsesavanju: 3800 m³/h Zunanje dimenzije: 6500x7700 mm

Poglej podrobnosti

Mali oglas

Oklepni valjar CBM 240 / ST 120 MACH-ID 92 CBM 240 ST 120

Babberich

908 km

Oklepni valjar CBM 240 / ST 120 MACH-ID 92
CBM 240ST 120

Pokliči

Mali oglas

4-STRANSKA LINIJA ZA RAZVRŠČANJE IN ROBLJENJE ROBOV IMA Combima II 440 + Combima II 190

Roreto

584 km

4-STRANSKA LINIJA ZA RAZVRŠČANJE IN ROBLJENJE ROBOV
IMACombima II 440 + Combima II 190

Pokliči

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: A) W06027 1st double-sided sizing and edge banding machine "IMA" Combima II /440 /A /R3 Giodpeun N Dlofx Ad Asp B) Rotation unit (90°) C) W06028 2nd double-sided sizing and edge banding machine "IMA" Combima II /190 /B /R3

Poglej podrobnosti

Mali oglas

Nemčija

653 km

HOLZMA HPP 380
HOLZMAHPP 380

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, model krmilnika: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-scoring saws, and a patented central angle retracing system which reduces cycle times by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor rated at 18.0 kW. For further information on this panel saw, please contact us. Additional Equipment • Air cushion table with roller elements 2160 x 650 mm: 4 units • Central blower: 1 unit Machine Advantages Quality-related advantages • CE-certified, GS-certified, FPH wood-dust certified • Divisions: 75/275/475/1050/1850/2650/3450 mm measured from the angle stop to the center of the clamp • Possibility to mount 2 additional two-finger clamps • 4 manual alignment fences on clamps • Possibility to mount 1 additional single-finger clamp • Air cushion table nozzle spacing: 70 x 70 mm Technical advantages • Scoring saw motor: 2.2 kW • Operating voltage: 400 V / 50 Hz Gisdpfx Adoyaiiys Ajp • Electrical connection value at HS motor: 18.0 kW = 24 kW, 21.0 kW = 27 kW • Positioning accuracy: +/- 0.1 mm/m • Gentle material transport, permanent positioning accuracy, no lubrication required, high program pusher speed, maintenance-free, full stability of the steel table retained, easy and cost-effective replacement of phenolic resin plates, minimal cylinder wear, uniform pressure application, minimal trim cut, significantly reduced cycle times, top cut quality, minimal setup times, cycle time reduction, electronically adjustable pressure force • Cutting length: 4300 mm • Cutting width (program pusher travel): 4250 mm • Roller conveyor (10-track element): 1 unit • Roller conveyor (2-track element): 5 units • Clamps: 7 units (first 3 are two-finger, remaining are single-finger) Additional Information Machine still under power.

Poglej podrobnosti

Mali oglas