Amtec Vffs-Sys 12-Lane 720-P nakup rabljenega (59.861)

Stanje: novo, Leto izdelave: 2025, Complete dosing and packaging system for liquids, including tank, pump, and discharge conveyor. Suitable for viscous and non-viscous liquids such as creams, toothpaste, body lotion, shampoo, mayonnaise, ketchup, honey, jam, cooking oil, vinegar, juice, milk, etc. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen operator panel, available in various languages, e.g., English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, dual transport possible, air separation/extraction device (removes air from the pouch before sealing—does not create a vacuum), holder for heavy finished bags, Euro hole punching device, suitable for OPP and PE film (PE unit may incur extra charge). Specifications of the VFFS packaging machine: Filling range up to 5000ml; film width: max. 620mm; pouch size min-max: L(100-400)xW(180-300)mm; max. idle cycle rate: 45 cycles/minute; Stainless steel 304; 220V, 5kW; 6bar, 0.3m³/min; machine dimensions: LxWxH: approx. 1780x1850x1950mm; weight: 700kg. Tank and pump specifications: Tank capacity approx. 50L (customizable); height: approx. 70mm; the pump is available in various versions, e.g., 10~150ml, 150~500ml, 500ml~1L, 1L~2L, 2L~5L, etc. The pump system is tailored to customer products based on sample submission. Specifications and product feeding differ accordingly (surcharges may apply). The discharge conveyor has a stainless steel frame. Specifications: conveyor speed: 30m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Dimensions of the complete system: approx. L1780xW3700xH2020mm, depending on final configuration. The system must be adapted to customer-/product-specific requirements. Therefore, module and machine specifications may vary. Main components: Color touchscreen display SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. The machine/system is also available in various versions for different pouch sizes and packaging speeds. Hfedpfov Nmlgsx Ah Tsn Please note that our new prices are often below typical used equipment prices. Feel free to inquire and let us know your packaging requirements. Normally, 30–50 different new machines are available immediately from stock. For custom-built machines, we offer very short delivery times from approx. 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic complete counting and packaging system for a wide range of agricultural products in mesh bags with bag weights from 0.5 to 5.0 kg. – Incl. feed hopper/container, infeed conveyor, counting machine, and fully automatic mesh bag packaging machines. – Specifications: max. machine cycle rate in idle: 18 cycles/minute; power supply: 380V, 2.6 kW; compressed air: 6 bar, 1.5 m³; machine dimensions: customized to customer requirements. Hsdpfx Ahjv Nm A Se Tofn Please note that our new prices are often below typical used equipment prices. Simply send us your inquiry and let us know your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from approx. 3 weeks. – All machines are available with full warranty.

Leto izdelave: 2025, stanje: novo, Net bag packaging machine. Suitable for PE net bags in pillow or gusseted form for fresh vegetables and fruits, such as: potatoes, onions, apples, cabbage, peas, carrots, peaches, lemons, grapefruits, kiwis, etc. Complete stainless steel version, PLC control with touchscreen. Print mark sensor. Suitable films: PE net, net-laminated film, etc. Bag types: flat bags, stand-up pouches with/without carry handle. - Specifications: max. film width: 1200mm; bag length: 100-800mm; bag width: 290-590mm; max. machine cycle rate (idle): 12 cycles/minute; compressed air: 0.80m³/6 bar; power supply: 220V, 6kW. Hfedpfx Aov Nm A Eeh Tsn The machine/system is also available in further configurations for various packaging sizes and packaging speeds. Please note that our new price is often lower than the typical used price. Feel free to contact us and tell us about your packaging task. - Typically, 30-50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from approx. 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Complete vertical packaging system for dosing coffee beans AND ground coffee and for packing into stand-up coffee pouches with aroma valve. The system is equipped with two separate dosing units (auger filler for powder, volumetric dosing unit for granules) and also includes a Z-bucket elevator, screw conveyor, outfeed conveyor belt, and an AMTEC PRO P60L as the VFFS packaging machine. Further included are a hot stamping printer for date and batch number (optional: thermal transfer printer on request), anti-static module, stand-up pouch module (gusset device), and flat-bottom module (the bottom seam is formed tightly to the base, depending on the film material). VFFS Specifications: Reliable film pulling via vacuum; PLC from MITSUBISHI/SIEMENS, WEINVIEW touchscreen; mark sensor; quick-change forming unit; pneumatic sealing unit; film transport by servomotor; bag size: L(100-300)xW(80-240)mm; max. idle machine cycle rate: 60 cycles/minute; stainless steel; 220V/4.0kW; 6bar, 0.36m³/min; dimensions and weight: L1550xW1160xH1480mm, 600/700kg. Volumetric dosing unit specifications: 4 cups; stainless steel; dosing range: 80-2,000ml; max. idle machine cycle rate: 60 cycles/minute. Hsdjv Nmh Ijpfx Ah Tsfn Auger filler specifications: Stainless steel; servomotor; dosing range: 10-2000g; filling hopper: 50 liters; accuracy: 0.5-2%; max. idle machine cycle rate: 60 cycles/minute; hopper with side opening, including dust collector. Please note that our new machine prices are often below the standard used prices. Feel free to ask for a quote and let us know your packaging requirements. We typically carry 30-50 different new machines in stock and ready for immediate delivery. For custom-manufactured machines, we offer very short lead times starting from approximately 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Complete vertical packaging system for dosing coffee beans AND ground coffee, and packaging into coffee stand-up pouches with aroma valve. The system is equipped with two separate dosing units (auger doser for powder, volumetric doser for granules), and includes a Z-type conveyor, screw conveyor, discharge conveyor belt, and an AMTEC PRO P60XL as the VFFS packaging machine. Features also include a hot stamp printer for date and batch number (optional: thermal transfer printer on request), an anti-static module, stand-up pouch module (gusset device), and flat-bottom module (the bottom seam is positioned tightly to the base, depending on film material). - VFFS Specifications: Reliable film transport by vacuum; PLC by MITSUBISHI/SIEMENS, WEINVIEW touchscreen; print mark sensor; quick-change forming unit; pneumatic sealing unit; servo motor for film transport; bag size: L(100-380)xW(110-300)mm; max. machine cycle rate (no load): 60 cycles/minute; stainless steel; 220V/4.0kW; 6 bar, 0.4m³/min; Dimensions and weight: L1600xW1260xH1680mm, 600/700kg. - Volumetric Dosing Unit Specifications: 4 cups; stainless steel; dosing range: 80-2,000ml; max. machine cycle rate (no load): 60 cycles/minute. Hsdpsv Nmh Uofx Ah Tefn - Auger Doser Specifications: Stainless steel; servo motor; dosing range: 10-2,000g; fill hopper: 50 liters; accuracy: 0.5-2%; max. machine cycle rate (no load): 60 cycles/minute; hopper with side-opening, including dust collector. Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us with your packaging requirements. We generally have 30-50 different new machines available from stock for immediate delivery. Additionally, we offer very short lead times from approximately 3 weeks for machines built to customer specifications. All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Compact vertical packaging system for flat sachets with back seam, including dosing unit for granules. The dosing unit can be customized according to customer requirements, e.g. counting device for dosing tablets/tabs/capsules. Suitable for laminated BOPP/PE films. PLC and 7" touchscreen, stainless steel construction (SS304 – optional SS316). Self-diagnosis functions, PID temperature controller, electronic components from SCHNEIDER or OMRON, fast and smooth film transport thanks to motor-driven feed control, pneumatic components from AIRTAC. - Specifications: max. idle machine cycle rate: 70 cycles/minute; bag sizes: L(10-180)xW(40-140)mm; max film width: 300mm; suitable film thickness: 40–90μm; 3.2kW, 220V; machine dimensions: L1500xW920xH1800mm; weight: 300kg. Hfodpfxjv Nmg Re Ah Ton Please note that our new prices are often below the typical used prices. Feel free to contact us and describe your packaging requirements. – We typically have 30–50 different new machines immediately available from stock. For custom-built machines, we also offer very short lead times starting at approx. 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Sample system with 10 automatic counting discs and a standard pouch packaging machine. Suitable for counting small parts such as screws, nuts, candies, nuts, etc., and for packaging programmable assortments into flat pouches or 3- or 4-side sealed bags. The number and size of the counting discs in the system can be customized (this sample system includes 10 counting discs!). - Specifications: Machine dimensions and total price depend on the required packing speed, the products to be packed, and the pouch size. Available in stainless steel and painted steel. - The price applies only to the sample system. Hsdpfov Nmhnox Ah Tsfn Please note that our new prices are often below the usual used equipment prices. Feel free to inquire and tell us about your packaging requirements. - We typically have 30-50 different new machines available from stock at all times. For custom-built machines, we offer very short delivery times starting at approximately 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Sample system for counting and packaging small metal items or hardware in flat bags with back seal. The weighing and counting system with vertical form-fill-seal machine is suitable for small metal products such as nails, screws, nuts, bolts, washers, etc. The iron and metal items are conveyed via a magnetic belt to the weighing and counting system and then packaged in flat bags. – Specifications of the weighing-counting-packaging system: max. machine cycle speed in idle mode: 8 cycles/minute; bag dimensions: max. L200xW300mm; power: approx. 2kW, 220V; compressed air requirement: 0.2m³/min, 6-8 bar. The system can be extended for counting and packaging a variety of products into one bag. The specifications provided refer to the sample packaging system. Final machine dimensions and total price depend, among other factors, on the required packaging speed, the products to be packaged, and the bag size. Hfodpfx Ahsv Nmhzo Tsn Please note that our new prices are often lower than typical used machine prices. Feel free to contact us and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from around 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with 4-head weighing system (2.4l/head), single vessel feeder, and discharge conveyor belt. Vertical packaging machine: MITSUBISHI PLC, WEINVIEW touchscreen control monitor, automatic program setup, mark sensor, quick-change forming unit, sealing unit with servo motor, servo motor for film transport, dual transport possible. - Specifications: Bag size: L(50-230)xW(60-190)mm (single transport); max. machine cycle rate idle: 100 cycles/minute; stainless steel; 220V/4.5kW; 6 bar, 0.2m³/min; machine dimensions: L3842xW1149xH3113mm (depending on final layout); weight: 800/900kg. Hfsdpfxsv Nmgko Ah Ton Please note that our new prices are often below typical used equipment prices. Feel free to contact us and let us know your packaging requirements. - Usually, 30-50 different new machines are available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times from approximately 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic Polyamide Tetrahedron Tea Bag Packaging Machine, including volumetric dosing unit. Intermittent feed with stepper motors. Packaging materials: polyamide, PET mesh, and all materials sealable with ultrasound. Bag forming method: tetrahedral seals produced by two ultrasonic sealing units. Hodpfx Ahjv Nmifo Tsfn Specifications: max. machine cycle rate (idle): 50 cycles/min; volumetric dosing system (standard) for weights from 1–5g; accuracy: ±0.2g; tea bag dimensions – tetrahedron: 50–80mm; flat bag: W(60–80) x L(40–80)mm; film width: 120mm, 140mm, 160mm; machine dimensions: L1200×W900×H1800mm (dependent on final layout); power: 220V, 1.2kW; weight: 600kg. Please note that our new prices are often below typical used prices. Simply contact us and specify your packaging requirements. – We usually have 30–50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short lead times from approximately 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Packaging system for fully automatic dosing, filling, and packaging of tea into pyramid (tetrahedral) tea bags. Dosing or weighing is performed by an 8-head linear weigher, which is already included in the price. The pyramid tea bag packaging machine utilizes ultrasonic sealing technology to produce either flat standard tea bags or pyramid tea bags. Finally, the (flat or pyramid) tea bags are packed into the outer bag, which can be either a 3-side seal pouch or a pouch with a back seam. Hfodpsv Nmilefx Ah Tsn Specifications: Maximum machine cycle rate (idle): 50 cycles/minute; Number of linear weigher heads: 8; Weighing range: 1~10g; Accuracy: ±0.1g/bag; Tea bag dimensions: pyramid tea bag per side: 50–80 mm, flat tea bag: W(60–80)xL(40–80) mm; Suitable film types for tea bags: nylon, non-woven fabric, PET, PLA; Film width: 140 mm, 160 mm, 180 mm; Outer bag dimensions: W(80–120)xL(90–120) mm; Power: 220V, 1.5kW; Product-contacted parts made of stainless steel 304; Compressed air: 6 bar; Machine dimensions: depending on final layout. Please note that our new machine prices are often below standard used equipment prices. Feel free to send us your packaging requirements for a quote. Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built solutions, we offer very short delivery times starting from approximately 3 weeks. All machines come with a full warranty.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 15.642 h, premer vijaka: 45 mm, skupna višina: 2.213 mm, skupna masa: 15.750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection molding machine, ideal for precise plastics processing. Take advantage of the opportunity to purchase this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection molding machine. Contact us for further information. Additional Equipment • Fanuc robot Machine Advantages Hjdpfxsx D Hntj Ah Tsfn Qualitative Machine Advantages • Process data acquisition, mold protection Technical Machine Advantages • Minimum mold height: 350 mm / maximum mold height: 745 mm • Electronic main connection: 3/400 V 50 Hz • Programmable process, high dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Additional Information Standard Equipment: Support of the moving platen via linear guides/ Short/long stroke ejector/ Interface for external printer (hardcopy)/ Individual axis motion optimization (activeAdjust)/ Four-stage mold closing and four-stage mold opening process/ Increased pump drive power II (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3-phase + N + PE/ Separate mains connections for drive/heating/ Color data display/ Reinforced oil cooler (cooling water supply up to 35 °C)/ Separate water connections for mold and machine cooling/ Basic version Europe/ Corrosion protection/ Paintwork: Jet black (RAL9005): machine bed with installations, lower control cabinet/ Signal white (RAL9003): clamping unit, injection unit, nozzle protection/ Signal white (RAL9003): fixed safety devices, upper control cabinet/ Signal white (RAL9003): safety doors/ Structured Surfaces: Elastic machine mounts/ Digital and wear-free position measuring system (ultrasonic/high-resolution encoder for injection, mold, and ejector movement)/ Mold connection dimensions Type E (according to EUROMAP March '96)/ Centering diameter fixed platen: 160 mm/ Centering diameter moving platen: 160 mm/ No side ejector plate/ Standard Mold Installation Height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety door closed)/ Ejector with position control (P/F+V independently programmable, parallel to mold movement)/ Oil lubrication of toggle lever/ Injection unit/ Optional Equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for fine filtering in bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), switchable via main switch/ Socket IECEE 3Ph / 400V-16A, switchable via main switch/ Warning light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on moving platen (programmable)/ 6 pneumatic 5/2-way valves on fixed platen (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with check valves)/ Manual pressure relief for core pull 1-circuit/ Operator-side safety guarding extended (250 mm)/ Hot runner control 12 zones, integrated (2.75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force regulation/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with discharge option/

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal (VFFS) packaging machine for the production of pillow bags with longitudinal rear seam, gusseted stand-up pouches (gusset tooling required) OR for pyramid-shaped bags (special sealing unit required). Equipped with: touchscreen; PLC; photoelectric sensor for registration mark detection (controls seal/cut position); pneumatic end-sealing unit; servo drive for film pulling; thermal transfer printer for batch number, date, and best-before date. - Specifications of the VFFS machine: max. idle cycle rate: 50 cycles/min; bag size: L(40–450) x W(105–350) mm (double film pull possible for longer bags); suitable film width: 230–720 mm; product-contact parts made of AISI 304 (optionally AISI 316 for an additional charge); power supply: 220V, 50/60 Hz; power consumption: 3.8 kW; required compressed air: 0.4–0.8 MPa; compressed air consumption: 0.8 m³/min; dimensions (LxWxH): 1996*1496*2138 mm; weight: 850 kg. Please note that our new machine prices are often below typical used machine prices. Feel free to inquire and inform us of your packaging application. – We always have 30–50 different new machines available ex-stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times starting from approx. 3 weeks. – All machines are delivered with a full warranty. Hsdpfx Aev Nnddsh Tefn

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, DrillMatic TA325/P/H/12/2/1/-180° Rotatable Hydraulic/Pneumatic Indexing Table 400x620 Manufacturer: DrillMatic Model: TA325/P/H/12/2/1/-180° Air Connection: 4 ports Index Positions: 3, 4, 6, 8, 12 Year of Manufacture: 2015 Weight: 66 kg Hfsdoukg Srjpfx Ah Tjn Table Size: 400 x 620 mm

Stanje: novo, Leto izdelave: 2025, Complete dosing and packaging system for liquids, including a 150-liter tank with agitator and twin-piston pump. AMTEC P60L VERTIwrap machine featuring vacuum film feed belts, MITSUBISHI control unit, and WEINVIEW touchscreen. PE film sealing unit (recommended film: PE Co-Extruded, 3-layer LLDPE). - Specifications: Bag size: L(100-300) x W(80-240)mm; maximum filling volume: 1.5 liters; maximum machine cycling rate (no load): 40 cycles/minute; tank: includes agitator unit, 150 liters, SS304 stainless steel; twin-piston pump: stainless steel tubing SS304, outlet pipe diameter: 167mm, inlet pipe diameter: 158mm, wall thickness: 9mm, piston pump tube length: 370mm, suitable for up to 1.5 liters of liquid; stainless steel ball valve SS316; stainless steel nozzle SS304; PTFE outlet; machine dimensions and weight: L1550 x W1160 x H1480mm, 480/600kg; tank dimensions and weight: L1000 x W1000 x H1800mm, 150/200kg. Hfsdpov Nmg Dsfx Ah Ton Please note that our new equipment prices are often below typical used equipment prices. Simply send us an inquiry and let us know your packaging requirements. - We usually have 30-50 different new machines in stock and ready for immediate delivery. For custom-built machines, we offer very short lead times starting at around 3 weeks. - All machines come with a full warranty.

Leto izdelave: 2025, stanje: novo, Complete version of the vertical packaging system with volumetric dosing unit, 1 cup, single-vessel conveyor, and discharge conveyor belt. Suitable for packing granular products such as sugar, rice, nuts, etc. The vertical packaging machine (VFFS) is equipped with the following components: PLC (touchscreen operation monitor, available in various languages, such as English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport, dual transport function possible, air separation/extraction device (removes air from the bag before sealing—no vacuum is created), holding device for heavy finished bags, Euro hole punching device, suitable for OPP and PE film (PE unit may incur additional charge). – Specifications of the VFFS packaging machine: filling range: 150–1,200 ml; film width: max. 420 mm; bag size min–max: L(60–300)xW(60–200) mm; maximum machine cycle rate (idle): 50 cycles/minute; stainless steel 30; 220V, 2.2 kW; 6 bar, 0.3 m³/min; machine dimensions: LxWxH: approx. 1080x1300x1400 mm; weight: 500 kg. The dosing unit's cup has a filling capacity of up to 50 l. The single-vessel conveyor also has a filling capacity of up to 50 l. The container is manually filled in the lower position and automatically emptied in the upper position (complete cycle: 1 minute). – Specifications: height: 3–5 m; machine dimensions: L1400xW700xH3500 mm; 220 V/1 kW. Variations possible. The discharge conveyor belt has a stainless steel frame. – Specifications: conveyor speed: 30 m/min; 220V, 0.55 kW; dimensions LxWxH: approx. 1850x550x1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L1080xW4550xH3500 mm, depending on final configuration. The system must always be customized to customer/product-specific requirements, which may result in specific deviations for modules and machines from the specifications provided. Key components: colored SIEMENS touchscreen display, SIEMENS PLC controller, SIEMENS servo motor, AIRTAC cylinder, AIRTAC solenoid valve, OMRON relay, SIEMENS servo motor for film transport. Hfjdpfov Nmi Sex Ah Tsn The machine/system is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below usual used prices. Please feel free to contact us and let us know your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with either high or low flowability. The vertical packaging machine (VFFS) is equipped with the following components: PLC (touchscreen operator monitor, available in various languages, e.g., English, German, etc.), date printer, automatic program setup, mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport (double transport possible), air separator/extraction device (removes air from the bag before sealing—no vacuum is generated), holding device for heavy finished bags, Euro slot punching device, suitable for OPP and PE film (PE unit available at extra cost if required). Specifications of the VFFS packaging machine: Filling range: up to 3000ml; Film width: max. 520mm; Bag size min-max: L(80-400)xW(80-250)mm; max. idle machine cycle rate: 50 cycles/minute; Stainless steel 304; 220V, 4kW; 6bar, 0.3m³/min; Machine dimensions: LxWxH: approx. 1150x1790x1650mm; Weight: 600kg. Specifications of auger dosing unit: Filling capacity up to 50l (hopper); Filling range: 10-1000g; max. idle machine cycle rate: 50 cycles/min; Accuracy: ±0.3~1.5% (depending on product); 380V, 2.5kW; Dosing unit dimensions LxWxH: 690x1030x1100mm; Weight: 150kg. Screw conveyor for automatic material transfer to the dosing unit. Vibration motor ensures uniform product flow. Feed hopper with up to 150 liters volume. Size depends on the customer-specific final system. Specifications: Hopper, conveyor length and angle can be customized to product or customer requirements; overall dimensions depend on this. Conveyor length: 3~4m; stainless steel 304; Conveyor speed: 3.0m³/h - 12.0m³/h; 380V, 0.8kW-4.1kW; Weight: 130kg – 270kg. Deviation of the stated specifications is possible. Support bar optionally available. The discharge conveyor features a stainless steel frame. Specifications: Conveyor speed: 30m/min; 220V, 0.55kW; Dimensions LxWxH: approx. 1850x550x1230mm; Weight: 80kg. Complete system dimensions: approx. 2350xW3590xH2500mm, depending on final configuration. The system must be adapted to customer-/product-specific requirements; therefore, deviations in the stated specifications of the modules and machines may occur. Main components: Colored SIEMENS touchscreen display, SIEMENS PLC controller, SIEMENS servo motor, AIRTAC cylinder, AIRTAC solenoid valve, OMRON relay, SIEMENS servo motor for film transport. The machine/plant is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used machines. Feel free to inquire and let us know your packaging requirements. – Typically, there are always 30-50 different new machines available from stock for immediate delivery. For custom-manufactured machines, we offer very short lead times starting from approximately 3 weeks. – All machines come with a full warranty. Hfsdpov Nmkvsfx Ah Ton

Leto izdelave: 2025, stanje: novo, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with high or low flowability. The vertical form fill seal machine (VFFS) is equipped with the following features: PLC (touchscreen control monitor available in multiple languages, e.g., English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport, double transport possible, air displacement/extraction device (removes air from the bag before sealing – a vacuum is not created), support device for heavy finished bags, euro slot punching device, suitable for OPP and PE film (PE unit may incur additional cost). - VFFS Packaging Machine Specifications: Filling range: up to 5000ml; film width: max. 620mm; bag size min-max: L(100-400)xW(180-300)mm; max. idle cycle rate: 45 cycles/minute; Stainless steel 304; 220V, 5kW; 6bar, 0.3m³/min; packaging machine dimensions LxWxH: approx. 1780x1850x1950mm; weight: 700kg. - Auger Dosing Unit Specifications: Filling capacity up to 50l (hopper); filling range: 10-5000g; max. idle cycle rate: 40 cycles/min; accuracy: ±0.3~1.5% (depending on product); 380V, 3kW; dosing unit dimensions LxWxH: 600x1250x1200mm; weight: 220kg. - Screw conveyor for automatic conveying of material to the dosing unit. The vibration motor ensures even product flow. Feed hopper with up to 150-liter capacity. Size depends on customer-specific end setup. Specifications: Hopper, conveyor length and angle can be adapted according to customer/product-specific requirements, hence total dimensions will vary. Conveyor length: 3~4m; stainless steel 304; conveying speed: 3.0m³/h – 12.0m³/h; 380V, 0.8kW-4.1kW; weight: 130kg – 270kg. Deviations in the specified specifications are possible. Support bar optionally available. Hodpfx Ahjv Nmk Ae Tofn - The discharge conveyor has a stainless steel frame. Specifications: conveying speed: 30m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Dimensions of the complete system: approx. L2980xW3650xH2600mm, depending on final configuration. The system must generally be adapted to customer/product-specific requirements. As such, module and machine specifications may differ as indicated. Key components: Colored SIEMENS touchscreen display, SIEMENS PLC control unit, SIEMENS servo motor, AIRTAC cylinders, AIRTAC solenoid valve, OMRON relays, SIEMENS servo motor for film transport. The machine/system is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the standard used prices. Feel free to contact us and let us know your packaging requirements. Usually, 30-50 different new machines are immediately available from stock. For machines that need to be custom-built, we offer very short delivery times starting at approx. 3 weeks. All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with volumetric dosing unit, single-cup feeder, and outfeed conveyor belt. Suitable for packing granular products such as sugar, rice, nuts, etc. The vertical form-fill-seal machine (VFFS) is equipped with the following components: PLC (touchscreen operator panel, available in multiple languages such as English, German, etc.), date printer, automatic program setup, registration sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, option for double transport, air extraction/unit (removes air from the bag before sealing—does not create a vacuum), support device for heavy finished bags, euro-hole punching device, suitable for OPP and PE film (PE sealing unit may incur surcharge).—Specifications of the VFFS packaging machine: Filling range: up to 3,000 ml; film width: max. 520 mm; bag size min-max: L(80-400)xW(80-250) mm; max. idle cycle speed: 50 cycles/minute; stainless steel 304; 220 V, 4 kW; 6 bar, 0.3 m³/min; machine dimensions LxWxH: approx. 1150x1790x1650 mm; weight: 600 kg. The dosing cup has a filling capacity of up to 50 l. The single-cup feeder also has a capacity of up to 50 l. The hopper is manually filled in the lower position and automatically emptied in the upper position (complete cycle: 1 minute).—Specifications: height: 3-5 m; machine dimensions: L1400xW700xH3500 mm; 220 V/1 kW. Variations possible. The outfeed conveyor belt comes with a stainless steel frame.—Specifications: conveying speed: 30 m/min; 220 V, 0.55 kW; dimensions LxWxH: approx. 1850x550x1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L1150xW5040xH3500 mm, depending on final configuration. The system must be tailored to customer/product-specific requirements, so technical specifications of components and machines may vary. Key components: Color touchscreen display SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. The machine/system is also available in further versions for different bag sizes and packaging speeds. Please note that our new prices are often below the typical used equipment prices. Feel free to contact us and inform us about your packaging requirements. – Typically, 30–50 different new machines are always available from stock for immediate delivery. For customer-specific equipment, we offer very short lead times starting from approx. 3 weeks. – All machines are available with a full warranty. Hfsdpsv Nmkcofx Ah Tsn

Leto izdelave: 2025, stanje: novo, Complete version of the vertical packaging system with 10-head multihead weigher (1.3 l/head), Z-shaped conveyor, platform, discharge conveyor belt, and collection table for finished, packaged products. Suitable for packaging irregular-shaped bulk goods such as potato chips, cornflakes, cookies, nuts, candy, shrimp, or industrial components and products such as screws, nails, metal or plastic parts. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen operating monitor, available in multiple languages such as English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, double transport option, air extraction device (removes air from the bag before sealing – does not create a vacuum), support device for heavy finished bags, Euro hole punch, suitable for OPP and PE film (PE sealing unit available at additional cost if required). Hsdpfx Ahsv Nmire Tofn - Specifications of the VFFS packaging machine: Filling range: 150-1200 ml; film width: max. 420 mm; bag size min-max: L(60-300)xW(60-200) mm; max. idle cycle rate: 50 cycles/minute; stainless steel 304; 220V, 2.2 kW; 6 bar, 0.3 m³/min; machine dimensions LxWxH: approx. 1080x1300x1400 mm; weight: 500 kg. The weighing unit, with its 10 weighing heads (1.3 l/head), offers high weighing accuracy. Also equipped with a PLC, operation via touchscreen (available in multiple languages), 99 programs can be preset or saved, the servo motor (hopper) can be adjusted for different product types. - Specifications: Hopper capacity: 1.3 l; weighing range: 10~1000 g; accuracy: ±0.3~1.5 g (depending on product); max. idle cycle rate: 60 cycles/min; stainless steel 304; 220V, 1.5 kW; dimensions of weighing unit LxWxH: approx. 1436x1086x1258 mm; weight: 400 kg. - Specifications Z-conveyor (for feeding material to the weighing unit): Dimensions can be customized (standard height 3.6 m); conveying capacity: 3-6 m³/h; 380V, 0.75 kW; gross weight: 500 kg. The discharge conveyor features a stainless steel frame. - Specifications: conveying speed: 30 m/min; 220V, 0.55 kW; dimensions LxWxH: approx. 1850x550x1230 mm; weight: 80 kg. Rotating collection table for collecting the finished bags from the discharge conveyor. Speed is adjustable. Table diameter: 1200 mm (standard); stainless steel 304; 220V, 0.37 kW. Stainless steel platform, necessary for access to the weighing unit and upper part of the packaging machine, dimensions LxWxH: approx. 2x2x2 m. Dimensions of the complete system: approx. L3200xW3200xH3600 mm, depending on final configuration. The system must be adapted to customer- and product-specific requirements, so deviations in the specified dimensions and components may occur based on module and machine versions. Key components: Color touchscreen display SIEMENS, PLC control unit SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. The machine/system is also available in further configurations for various packing sizes and speeds.

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with 10-head multihead weigher (1.3 l/head), Z-shaped bucket elevator, platform, discharge conveyor belt, and rotary accumulation table for finished, packaged products. Suitable for packing irregular bulk goods such as potato chips, cornflakes, biscuits, nuts, confectionery, shrimp, industrial components/products such as screws, nails, metal or plastic parts. The vertical form fill seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen operation panel, available in various languages such as English, German, etc.), date printer, automatic program setup, print mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport, dual transport possible, air separator/exhaust device (removes air from the bag before sealing - does not create a vacuum), bag support bracket for heavy finished bags, Euro slot punching device, suitable for OPP and PE film (PE unit available at extra cost if required). - VFFS packaging machine specifications: Filling range: up to 3000ml; film width: max. 520mm; bag size min-max: L(80-400)xW(80-250)mm; max. machine cycles (no load): 50 cycles/min; stainless steel 304; 220V, 4kW; 6bar, 0.3m³/min; machine dimensions LxWxH: approx. 1150x1790x1650mm; weight: 600kg. The weighing unit, with its 10 weighing heads (1.3l/head), offers high weighing accuracy. Also equipped with a PLC and operated via a touchscreen (also available in various languages), 99 programs can be preset or stored, the servo motor (memory hopper) can be adjusted for different types of products. - Specifications: Memory hopper capacity: 1.3l; weighing range: 10~1000g; accuracy: ±0.3~1.5g (depending on product); max. machine cycles (no load): 60 cycles/min; stainless steel 304; 220V, 1.5kW; weighing unit dimensions LxWxH: approx. 1436x1086x1258mm; weight: 400kg. - Z-bucket elevator specifications (for transporting material to the weighing unit): Dimensions customizable to customer requirements (standard height 3.6m); conveying capacity: 3-6m³/h; 380V, 0.75kW; gross weight: 500kg. The discharge conveyor features a stainless steel frame. - Specifications: conveying speed: 30m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Rotary accumulation table for collecting finished bags from the discharge conveyor. Speed is adjustable. Table diameter: 1200mm (standard); stainless steel 304; 220V, 0.37kW. Stainless steel platform needed for access to weighing unit and upper part of the packaging machine, dimensions LxWxH: approx. 2x2x2m. Dimensions of the complete system: approx. L3200xW3200xH3600mm, depending on final configuration. The system must be customized to customer-/product-specific requirements. Specifications of modules and machines may therefore vary. Key components: Color touchscreen display SIEMENS, PLC control unit SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. Hodpfev Nmixsx Ah Tsfn The machine/system is also available in additional versions for various packing sizes and packing speeds.

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packing powdery products with either high or low flow properties. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen operation panel, available in various languages, e.g. English, German, etc.), date printer, automatic program setup, registration sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, dual transport function possible, air extraction device (removes air from the bag before sealing—does not create a vacuum), holding device for heavy finished bags, euro hole punching unit, suitable for OPP and PE film (PE unit may incur a surcharge). - Specifications of the VFFS packaging machine: Filling range: 150-1200 ml; film width: max. 420 mm; bag size min-max: L (60-300) x W (60-200) mm; maximum machine cycle speed in idle mode: 50 cycles/minute; stainless steel 304; 220 V, 2.2 kW; 6 bar, 0.3 m³/min; packaging machine dimensions: LxWxH: approx. 1080x1300x1400 mm; weight: 500 kg. - Specifications for the auger dosing unit: Filling capacity of up to 50 l (hopper); filling range: 10-300 g; maximum machine cycle speed in idle mode: 60 cycles/min; accuracy: ±0.3~1.5% (depending on product); 380 V, 1 kW; dosing unit dimensions LxWxH: 510x585x930 mm; weight: 100 kg. Screw conveyor for automatic material transfer to the dosing unit. The vibration motor ensures consistent product flow. Feed hopper with up to 150-litre volume. Final size depends on customer-specific system. - Specifications: Hopper, conveyor length, and incline can be customized according to customer/product requirements. Total dimensions depend accordingly. Conveyor length: 3~4 m; stainless steel 304; conveyor speed: 3.0 m³/h - 12.0 m³/h; 380 V, 0.8 kW-4.1 kW; weight: 130 kg – 270 kg. Specification deviations are possible. Support bar available optionally. The discharge conveyor features a stainless steel frame. - Specifications: Conveyor speed: 30 m/min; 220 V, 0.55 kW; dimensions LxWxH: approx. 1850x550x1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L2280xW3100xH2330 mm, depending on final configuration. As a rule, the system must be adapted to customer/product-specific requirements. Therefore, deviations from the module and machine specifications given may occur. Key components: Coloured Siemens touchscreen display, Siemens PLC controller, Siemens servomotor, Airtac cylinders, Airtac solenoid valves, Omron relays, Siemens servomotor for film transport. This machine/system is also available in other versions for various packaging sizes and speeds. Please note that our new prices are often below usual used equipment prices. Simply enquire with us and tell us your packaging requirements. – Usually 30-50 different new machines are available ex-stock for immediate delivery. For customer-specific machines, we also offer very short delivery times, from approx. 3 weeks. – All machines are available with full warranty. Hfjdpfxjv Nmkpo Ah Ten

Stanje: novo, Leto izdelave: 2025, Full version of the vertical packaging system with a 10-head multihead weigher (2.5 L/head), Z-type incline conveyor, platform, outfeed conveyor belt, and rotary collection table for finished, packaged products. Suitable for packaging irregularly shaped bulk goods such as potato chips, cornflakes, biscuits, nuts, candy, shrimp, and industrial components/products like screws, nails, and metal or plastic parts. The vertical form fill seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen control monitor, available in various languages, e.g. English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, servomotor for film transport, dual film transport possible, air extraction/evacuation device (removes residual air from the pouch before sealing – does not create a vacuum), support device for heavy filled bags, Euro slot punch device, suitable for OPP and PE film (PE unit may be subject to additional charge). Specifications of the VFFS packaging machine: - Filling volume: up to 5000 ml - Film width: max. 620 mm - Bag size min–max: L(100–400)xW(180–300)mm - Max. cycles (no load): 45 cycles/min - Material: Stainless steel 304 - Power supply: 220V, 5 kW - Air supply: 6 bar, 0.3 m³/min - Dimensions (LxWxH): approx. 1780x1850x1950 mm - Weight: 700 kg The weighing unit, with its 10 weighing heads (2.5 L/head), ensures high weighing accuracy. It is also equipped with a PLC, touchscreen control (available in multiple languages), up to 99 programs can be preset/stored, and the servomotor (hopper) can be adjusted for different product types. Specifications: - Hopper capacity: 2.5 L - Weighing range: 10~3000 g - Accuracy: ±0.1~2 g (product-dependent) - Max. cycles (no load): 60 cycles/min - Material: Stainless steel 304 - Power supply: 220V, 1.5 kW - Dimensions (LxWxH): approx. 1600x1136x1484 mm - Weight: 500 kg Z-type incline conveyor (for transporting product to the weighing unit): Dimensions can be customized to customer requirements (standard height 3.6 m); conveying capacity: 3–6 m³/h; power supply: 380V, 0.75 kW; gross weight: 500 kg. The outfeed conveyor belt features a stainless steel frame. Specifications: - Conveyor speed: 30 m/min - Power supply: 220V, 0.55 kW - Dimensions (LxWxH): approx. 1850x550x1230 mm - Weight: 80 kg Rotary collection table for accumulating finished bags from the outfeed conveyor; speed adjustable; table diameter: 1200 mm (standard); stainless steel 304; 220V, 0.37 kW. Stainless steel platform required for access to the weighing unit and upper part of the packaging machine. Dimensions (LxWxH): approx. 2x2x2 m. Complete system dimensions: approx. L3200xW3200xH3600 mm; dependent on final configuration. The system must be adapted to customer-/product-specific requirements, so variations in the individual modules’ and machines’ specifications are possible. Key components: Color touchscreen panel SIEMENS, PLC controller SIEMENS, servomotor SIEMENS, AIRTAC cylinders, AIRTAC solenoid valves, OMRON relays, SIEMENS servomotor for film transport. The machine/system is also available in other versions for different packaging sizes and speeds. Hfodpfxov Nmi Ee Ah Ten

Stanje: novo, Leto izdelave: 2025, Complete vertical packaging system version with volumetric dosing unit, one cup, single-tank conveyor, and discharge conveyor belt. Suitable for packaging granular products such as sugar, rice, nuts, etc. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC system (touchscreen operating monitor, available in multiple languages such as English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, film transport servo motor, dual transport possible, air separation/extraction device (removes air from the bag before sealing—without creating a vacuum), holder device for heavy finished bags, Euro-hole punching device, suitable for OPP and PE film (PE unit may incur additional cost). — Specifications of the VFFS packaging machine: filling range up to 5000 ml; film width max. 620 mm; bag size min-max: L(100–400) x W(180–300) mm; max. machine cycle rate in idle: 45 cycles/min; stainless steel 304; 220V, 5kW; 6 bar, 0.3 m³/min; packaging machine dimensions: LxWxH: approx. 1780x1850x1950 mm; weight: 700 kg. The cup of the dosing unit has a filling capacity of up to 50 l. The single-tank conveyor also has a filling capacity of up to 50 l. The tank is filled manually in the lower position. In the upper position, it is emptied automatically (complete cycle: 1 minute). — Specifications: height: 3–5 m; machine dimensions: L1400xW700xH3500 mm; 220V/1kW. Variations possible. The discharge conveyor features a stainless steel frame. — Specifications: conveyor speed: 30 m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L1780xW5100xH3500 mm, depending on final configuration. The system must generally be adapted to customer-/product-specific requirements. Therefore, deviations in the stated specifications of modules and machines may occur. Key components: SIEMENS color touchscreen display, SIEMENS PLC control unit, SIEMENS servo motor, AIRTAC cylinders, AIRTAC solenoid valves, OMRON relays, SIEMENS film transport servo motor. The machine/system is also available in other versions for various packaging sizes and packaging speeds. Hfedsv Nmkiepfx Ah Tsn Please note that our new prices are often below typical used equipment prices. Feel free to contact us and tell us your packaging requirements. — Typically, 30–50 different new machines are available from stock with immediate delivery. For custom-made machines, we offer very short lead times from approximately 3 weeks. — All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic filling and sealing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main unit doses reliably and precisely using a peristaltic pump system and seals the vials with a lyophilization stopper. The 8-head capping unit also operates at high speed and precision and is suitable for aluminum screw caps. Vials are individually guided, ensuring safe and rapid filling and sealing. Includes a collection table for the finished product, which, together with the capper and main filling machine, flexibly combines to form a complete line. All machines/modules are equipped with dust protection covers and laminar flow hoods. – Specifications of the filling and sealing system: Hedpsv Nlcdefx Ah Tsfn Number of filling stations: 4; Number of stoppering heads for lyophilization stoppers: 1; Number of capping heads for aluminum screw caps: 8; Filling volume: max. 30ml per vial; Idle speed: max. 150 bottles/min (with 4 filling stations and 5ml per vial); Accuracy: = ± 1–3%; Suitable bottles: glass; Power: 3.35kW; 220/380V; Line dimensions: according to customer-specific configuration; Total weight: approx. 1215kg. The photo shows the main machine only. Images of additional modules are available upon request. Please note that our prices for new equipment are often lower than standard used prices. Do not hesitate to contact us and let us know about your packaging requirements. – Generally, we have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from around 3 weeks. – All machines are supplied with a full warranty.