Jutec 6000 nakup rabljenega (13)

Stanje: rabljeno, Tukaj vam ponujamo cevno krivilko JUTEC 6000D. Podatke najdete v priloženi ponudbi. Fodpfsxz Rz Esx Aa Rspp Za vsa vprašanja smo vam z veseljem na voljo.

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: Fpedpfx Aaong Amkj Rep • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC Fpodpfx Aonh R Eksa Rep • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1018, skupna masa: 120 kg, skupna dolžina: 500 mm, skupna višina: 1.000 mm, skupna širina: 700 mm, Oprema: nujno zaustavitev, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. Fedpfxong Ax So Aa Rjpp For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, JUTEC, tip 3000, z nastavkom za upogibanje profilov PB 20 -CE-oznaka -Upogibna zmogljivost / ploski jekel 100x8 mm -Upogibna zmogljivost / okrogli material 20 mm -Digitalna nastavitev kota upogiba / prikaz -Opora za material -Pogon – elektromehanski -Nadzor – digitalni Fpodpfoz S Afpox Aa Rjp -6 – vrt./min (upogibna os) -Nastavek za orodje / šestkotnik 40 mm -Nožni stikalo -Dokumentacija Mere: D x Š x V 0,8 x 0,7 x 1,5 metra / teža pribl. 85 kg Pridržujemo si pravico do sprememb zaradi napak / tipkarskih napak.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, tlak (maks.): 250 letvica, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for demanding geometries to right- or left-hand bending. The plug-in bending tools enable quick changeovers to different tube sizes. Fast hydraulics to reduce downtimes is a key factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store a virtually unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In "Simple Bending", the length and rotation of each bend relative to each other are displayed automatically. In "Controlled Bending" mode, the data is stored beforehand, and during the bending process, a continuous target/actual comparison is performed. As a result, mispositioning within a tolerance window is ruled out and user-related error rates are minimized. General error messages are shown in full text on the large screen. The mandrel retraction is programmable and can automatically retract early when the bending angle is reached. The compact drive unit with detachable mandrel holder offers benefits for installation on site as well as for special designs with large tube feed, and is also available as a stationary version with a tool and mandrel rod organizer. The cost-effective alternative to a fully controlled CNC machine. POTENTIAL APPLICATIONS: • Hydraulic tubing installation • Pipeline construction • Plant construction, e.g. for chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity: Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunction machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Maximum bending angle: 180° • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot pedal OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic braking function or manual stops operated by foot pedal • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Pipe calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touchscreen with integrated pipe calculation • Bending radii up to 250 mm • Data transfer by cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demonstration room • Consulting and information session at your site • Consultation and processing of leasing/financing purchases through JUTEC Fedpeng Exasfx Aa Repp • Trade-in of your current machine • Service contracts, on-site maintenance for your machine

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1018, skupna masa: 550 kg, skupna dolžina: 1.100 mm, skupna višina: 100 mm, skupna širina: 800 mm, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, Oprema: nujno zaustavitev, MOČNA STROJ ZA UPOGLJANJE ZA EKSTREMNE RAZMIERE: Kompaktni stroj za upogljanje omogoča natančno in ponovljivo upogljanje do zunanjega premera 100 mm, neposredno na kraju montaže. Transport je mogoč z viličarjem ali z opcijskimi kolesi. Močan trifazni motor in natančno prestavno razmerje zagotavljajo zmogljivo pogonsko silo. Stroj navdušuje s svojo kompaktno in aerodinamično konstrukcijo ter zelo velikim obsegom upogibanja. Z zaznavanjem položaja neposredno na osi upogibanja se doseže optimalna natančnost upogibanja. Nastavitev kota upogibanja je enostavna in hitra prek uporabniku prijaznega vmesnika z menijem v 14 jezikih in upravljanjem na dotik, kar zagotavlja še bolj intuitivno upravljanje. Za kompleksnejše naloge upogibanja je mogoče shraniti 100 programov upogibanja, ki imajo zaporedje kotov do največ 8 upogibov na geometrijo. Multifunkcijsko upravljanje omogoča spremenljivo nastavitev hitrosti upogibanja za gibe naprej in nazaj ter parametrirano funkcijo nadmernega upogibanja za kompenzacijo povratne elastičnosti materiala. S pomočjo štirih lastnosti materiala se material samodejno upogne na zahtevani kot, kar zagotavlja natančen rezultat upogibanja. Princip »statična cev in vrtljivo orodje« pri upogibanju zagotavlja majhno porabo prostora. Pri tankostenskih ceveh se uporabljajo drsni vložki za doseganje upogibanja brez gubic in upogibanje lokov z minimalnimi deformacijami iz, na primer, nerjavečega jekla in bakrenih cevi. Z nastavkom za upogljanje profilov PB20 je mogoče brez težav upogibati ploščate, kvadratne in okrogle profile. Z majhnim nastavkom za upogljanje KBV so omogočeni izjemno majhni polmeri upogibanja. MOŽNI PODROČJA UPORABE: • Gradnja naprav • Hidravlične cevovodne instalacije • Upogljanje v obliki meandra • Izdelava prototipov • Sanitarna inštalacije ter ogrevalna tehnika • Ladjedelništvo TEHNIČNI PODATKI 10000: Nosilnost pri upogibanju: do 100 x 5 mm, 60 mm masivni material Trifazni tok 400 V Fpedpfondk N Aox Aa Rsp • Polmer upogibanja do 500 mm • Multifunkcijsko upravljanje stroja, nastavitev kota upogibanja (0,1°) • Maksimalni kot upogibanja 240° • Varnostno stikalo za stopalo z funkcijo za izklop v sili • Teža 600 kg OPCIJSKA DODATNA OPREMA: • Adapter za orodja iz serije modelov 3000/6000 z polmerom upogibanja od 45 mm, vključno s šesterokotno gredjo 40 mm • Upogibalnik profilov PB20 – za upogljanje ploščatih in kvadratnih profilov do maks. 100 x 10 mm, okroglih profilov do maks. 20 mm • Majhen nastavek za upogljanje KBV • Posebno orodje po želji • Prilagoditve programske opreme za posebne naloge NAŠA PONUDBA STORITEV: • Dobrodošli na testno proizvodnjo v našem demonstracijskem prostoru • Posvetovalni razgovor pri vas na kraju samem • Posvetovanje in izvedba kot lizing/financiranje prek podjetja JUTEC • Prevzem obstoječega stroja • Pogodbe o servisiranju, vzdrževanje pri vas na kraju samem

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 100 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 8 mm, Kot upogiba (maks.): 195 °, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BEND RADII This bending system offers solutions for complex geometries with standard radii of 2xD for tube dimensions from 15 to 100 mm. Depending on material quality and wall thickness ratio, radii as tight as 1.5xD can be reliably achieved in series production. With a tool height of 120 mm, there is also ample versatility for special profiles. The highly precise and powerful electric drive of the bending axis, together with the robust and rigid construction of the mandrel carrier and bending arm, ensures top-quality bending results. The plug-in bending tools enable quick setup changes for different tube sizes. The clamping pressure for the tube can be optimally adjusted. The PLC control (expandable via USB stick) with data memory and the latest X2X interface can store an almost unlimited number of programs for bending angles, length, and rotation, managing up to 50 bending steps per tube. To monitor springback values, a freely programmable database for up to 200 materials is available. The control offers two operating modes: In "Simple Bending", length and twist between the bends are automatically displayed. In "Controlled Bending" mode, data is pre-stored, and a continuous target/actual comparison is performed during bending. Also available with pneumatic rotary stop or with geared-assisted length and rotation positioning. POSSIBLE APPLICATIONS: • Plant engineering, e.g., chemical industry • Hydraulic piping • Metal construction • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Min./max. bending radius: 40 mm / 250 mm • Min. bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control for bending angle adjustment (0.1°) • Mandrel carrier lengths: 3000 / 4500 / 6000 mm • Maximum bending angle: 180º • Weight: 1,600–3,200 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Length and rotation positioning via automatic brake or manual stops using foot switch • Semi-automatic length and rotation positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation Fpjdpfenh R Susx Aa Rop • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Welcome to test production in our in-house demo room • Consulting and information session at your site • Consultation and transaction as leasing/finance purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, številka stroja/vozila: 1018, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, Premer cevi (maks.): 50 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, trajanje garancije: 24 meseci, Oprema: CE označba, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. Fedpjnfvy Uofx Aa Rspp The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, minimalni polmer upogibanja: 9 mm, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch Fpodpsndn Agjfx Aa Rjp OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, Rabljeni stroj za krivljenje cevi Jutec Fedpfx Ajyfmwxoa Ropp Tip: 5000 Kapaciteta: do pribl. 40 mm Dolžina trna: 4500 mm CNC vodenje Avtomatska glava Ročno vrtljiva glava s hidravličnim vpenjanjem Vključno s 3 kompleti orodij Letnik izdelave: 2009 Zelo malo uporabljen

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases • Large pipe and profile bends • General metal construction TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles Fodpfxjng A R Sj Aa Repp OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta aktuacije: električni, Premer cevi (maks.): 35 mm, Debelina stene cevi (maks.): 2 mm, Kot upogiba (maks.): 360 °, radij upogibanja (maks.): 150 mm, minimalni polmer upogibanja: 32 mm, skupna masa: 28 kg, trajanje garancije: 12 meseci, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. Fjdpfonfvx Nex Aa Ropp The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location