Gibljive Cevi nakup rabljenega (7.164)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 34.797 h, številka stroja/vozila: 2011-0250, Premer cevi (maks.): 600 mm, Dolžina cevi (maks.): 1.500 mm, Kot upogiba (maks.): 180 °, radij upogibanja (maks.): 200 mm, debelina stene: 3 mm, Original machine year of manufacture: 1996. Completely overhauled by the manufacturer in 2011 at a cost of approx. €250,000: electrical and mechanical systems extensively renewed. TECHNICAL DETAILS Tube diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + springback Tube length: 400 - 1,500 mm Tube outer diameter: 28 mm - 60 mm Material parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Motion parameters Bending direction: left Forward bending speed: max. 22.0 rpm (infinitely variable) Return bending speed: constant 22.0 rpm Rotation angle: max. 360° Rotational speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Height adjustment travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Gsdpfx Aex Srklefqoil Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Operator console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic tank volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning unit: NTB version Control unit: Schwarze-Robitec operator and control console EQUIPMENT - Automatic cold tube bending machine - Tube positioning unit - Gripper - Schwarze-Robitec tube magazine - Hydraulic drive for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and return - Various bending tools for Ø 60 mm tube - Various accessories - Control cabinet cooling unit - Foot switch (2-way) - Schwarze-Robitec operator console - Rittal control cabinet cooling unit type SK 3361100 Note: Due to lack of operator knowledge, the machine could only be tested in setup mode. No faults are known. The machine is currently dismantled.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Opis stroja: Visoko zmogljiv planetarni brusilnik, zasnovan za končno obdelavo površin (brušenje, satiniranje in poliranje) okroglih in ovalnih profilov. Model ML 100 3Z je opremljen s tremi neodvisnimi brusnimi enotami, ki omogočajo doseganje želene hrapavosti površine v enem samem prehodu. Glavne prednosti: Planetarni sistem: Brusni trakovi rotirajo okoli cevi, medtem ko se sam material ne vrti. To omogoča varno obdelavo izjemno dolgih ali rahlo ukrivljenih cevi. Gijdpfox Ti I Dex Afqjl Visoka učinkovitost (3Z): Zaradi treh postaj lahko kombinirate različne granulacije (npr. od grobega brušenja do finega sijaja) brez potrebe po menjavi trakov med operacijami. Vsestranost: Idealno za nerjaveče jeklo, aluminij, medenino in druge kovine do premera cca 114 mm. Kakovost površine: Zagotavlja popolnoma enakomerno obdelavo po celotnem obodu brez vidnih spojev. Stroj je v dobrem tehničnem stanju. Po dogovoru je možen preizkus. Brusilnik je idealen za obdelavo ravnih okroglih ali ovalnih cevi. Ima orbitalni sistem, ki omogoča večnamensko uporabo. Podajanje obdelovancev in odpiranje trakov je avtomatsko. Velikost obdelovanca: premer 10–114 mm. Minimalna dolžina obdelovanca pri avtomatskem podajalnem sistemu: 355 mm. Število brusnih trakov: 6 Skupna moč: 14 kW. Hitrost brusnih trakov: 10–30 m/s.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, številka stroja/vozila: 6713-2023-2009, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, Premer cevi (maks.): 60 mm, Dolžina cevi (maks.): 6.000 mm, skupna dolžina: 6.500 mm, skupna širina: 1.000 mm, skupna višina: 1.400 mm, moč: 5,2 kW (7,07 KM), Stroj za krivljenje cevi Gelber Bieger Tip: S03-60 Leto izdelave: 2009 Premer: 03–60 mm Dolžina: 6 m Elektromehanski pogon osi krivljenja PLC krmiljenje Ločljivost kota krivljenja: 0,1° Elektronsko merjenje dolžine in zasuka Ročni sistem z omejitvami s prehodi Zasuk v korakih po 15° Hidravlično vpenjanje cevi z nastavljivim pritiskom Programirljivo vračanje trna Gijdpfx Afjxuii Ujqsl Tričeljustni vpenjalni tulec Ojačano podaljšanje nosilca trna do 6 m Programska oprema za krivljenje cevi Vključuje orodje za sledeče premere: 50 mm, 42,5 mm, 40 mm, 35 mm, 30 mm, 25 mm, 20 mm Prevzem v tovarni, nepakirano

Stanje: rabljeno, Avtomatski stroj za upogibanje cevi Blagovna znamka: B.L.M. Gijdpfx Afox Swbieqel Model: B/90/M Avtomatski stroj za upogibanje cevi, zasnovan za industrijsko uporabo, opremljen z avtomatskim programiranjem za izvedbo več zaporednih upogibov. Stroj omogoča nastavitev oddaljenosti naslona, kar zagotavlja natančnost in ponovljivost procesa upogibanja. Za vse tehnične podrobnosti glejte tehnične liste v fotografijah.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Varilni aparat za sterilne cevi Terumo SCD IIB, kataloška številka 72508, zagotavlja zanesljive in visokokakovostne varjene spoje za sterilne cevne povezave, za cikel varjenja potrebuje le 30 sekund, je kompakten in prenosen, zahteva minimalno tehnično usposabljanje ter ga je mogoče brez težav vključiti v obstoječe procese. Zahteve za cevi: PVC cevi z nazivnim zunanjim premerom 5,46 mm (0,215 palca) in debelino stene 0,84 mm (0,033 palca) ali C-Flex cevi z nazivnim zunanjim premerom 6,35 mm (0,25 palca) in nazivnim notranjim premerom 3,18 mm (0,125 palca). Gisdpsuyu N Eefx Afqsl V dobrem delovnem stanju. Oglejte si tudi naše ostale oglase.

Stanje: novo, Condition: new Delivery time: approx. 2 weeks from order Country of origin: Netherlands Price: €4,646 Grinding belt dimensions: 100 x 2,000 mm Tube diameter: 20 – 76.1 mm Lever adjustment: 1 Handwheel adjustment: 1 Motor power: 3 kW Weight: 220 kg The AL100U-02 model can be operated either with two handwheels or a lever; both options are available on the machine. With the AL100U-02, you can notch material from Ø20 up to Ø76 mm. The support cross and the carriage with a rotating clamp are infinitely adjustable. This allows all tube profiles to be notched at any desired angle between 30° and 90°. The ALMI AL100U-02 processes square, rectangular, and round tubes of various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, adjusting the sanding belt with the supplied hex key is now even easier. The sanding belt can be quickly tensioned, and changing the grinding rollers is completed within seconds. All tube notchers come equipped with a deburring table as standard. Includes: 5 sanding belts, 1 grinding roller Ø42.4 mm Godpfx Aowir Dmofqoil

Stanje: rabljeno, Nouvel appareil de montage de flexibles DAEWOO type DA5100-HC Presse à flexibles hydraulique, presse à flexibles d’atelier pour sertissage de raccords de flexibles N° de série : 25DW05950ALE01 Année de fabrication : 2025 Force de sertissage : 500 tonnes Plage de sertissage : Ø 1/4 à 2" (15-63 mm) Ouverture max. de la matrice : env. 75 mm Débit de la pompe : 6 L/min Capacité de travail : 200 pcs/h Pression hydraulique : 315 bars Puissance moteur : 3 kW Alimentation : 400 V, 50 Hz - 2 modes de fonctionnement : manuel et automatique Gisdpfx Ajx Srwfefqsl - Commande par bouton-poussoir ou pédale - Réglage du trajet de pressage par vis moletée - Changement rapide pour le passage à d’autres diamètres de flexibles Les mors s’insèrent facilement dans les guides et sont maintenus magnétiquement - 10 jeux d’outils, matrices de sertissage (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Socle d’armoire avec unité hydraulique Dimensions (L x l x H) : 700 x 500 x 1250 mm Poids : 270 kg Neuf – jamais utilisé

Stanje: dober (rabljeno), Leto izdelave: 2005, vrsta upravljanja: CNC krmiljenje, - Največji kot upogibanja: +/- 180 + 10 ° - Dolžina potiska cevi: 4100 mm - Okrogla cev iz jekla do 30 x 2,2 mm² - Okrogla cev iz nerjavečega jekla do 30 x 1,5 mm Godpfx Aex T Di Ajfqsil - Kvadratne cevi: 20 x 2,5 mm - Čas upogiba 90 stopinj: 1,5 s (predhodni pomik) - Hitrost vzdolžnega pomika: 450 mm/s - Največji radij: 125 mm - Samostoječa upogibna glava, dolžina 850 mm - Pogon upogibne osi: elektrohidravlični

Stanje: rabljeno, Leto izdelave: 2001, Technical details: Tube diameter: 74 mm Wall thickness: 5 mm Tube diameter min.: 10 mm Tube diameter max.: 74 mm Round bar material (steel): max. 40 mm Control system: Trumpf Rohrtechnik IsoBend 2.0 Bending radius max.: max. 300 mm / min. 65 mm Bending angle max.: max. 195° / min. 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Tube loader length: 3000 mm Hydraulic operating pressure: operating pressure max. 300 bar Total power requirement: 43 kVA Machine weight approx.: 8.5 t Machine dimensions (LxWxH) approx.: 6.5 x 1.6 x 1.6 m Control panel dimensions (LxWxH): 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine with bending head and pivot arm (cold bending machine). Applications: Suitable only for processing tubes, round bars, and wires made of steel, stainless steel, and non-ferrous metals. The cross-slide of the bending head offers the following advantages: - Freely programmable X and Y axes - Cross-slide level change: travel = 300 mm (vertical position freely programmable) and max. horizontal movement 350 mm - Bending dies of different sizes within a bending die stack can be approached at will. The bending direction is to the right. Trumpf Rohrtechnik IsoBend 2.0 control software Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec and max. acceleration 1100 mm/sec) In good condition. Giodpfxju Ibvhs Afqsl

Stanje: novo, Leto izdelave: 2025, Laser power: 6,000 watts Gisdpfx Asxgc Arjfqol Round tube: 15 - 350 mm Square tube: 15 x 15 - 350 x 350 mm Rectangular tube: 15 x 15 - 350 x 350 mm Max. positioning accuracy X, Y axis: 0.05/1000 mm Max. positioning accuracy U axis: 0.05/1000 mm Max. mild steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm Max. tube weight: 40 kg/m Max. tube weight: 240 kg Length: 17,296 mm Width: 4,271 mm Height: 2,933 mm Standard equipment: Working range of tube diameter Round tube: 20 mm - 350 mm Square tube: 20 - 350 mm Rectangular tube: 20 x 20 mm - 350 x 350 mm Minimum clamping tube thickness: ≥1 mm Y-axis travel: 9,100 mm Z-axis travel: 4,000 mm X-axis travel: 400 mm Max. loading length: 9,200 mm Max. unloading length: 6,000 mm X,Y-axis positioning accuracy: +/-0.05 mm/1000 mm X,Y-axis repeatability: +/-0.05 mm/1000 mm Max. rotational U-axis positioning speed: 100 RPM Max. X/Y-axis acceleration: 1.0 G X-axis rapid traverse speed: ≤50 m/min Max. loading capacity per tube: ≤133 kg/m Machine operating temperature: 20℃ - 40℃

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rems Tornado 2010 stroj za rezanje cevi Dobro delujoče stanje. Oglejte si tudi naše druge oglase. Giedorzu T Aspfx Afqel

Stanje: novo, Condition: New Delivery time: approx. 2–4 weeks from order Country of origin: Netherlands Price: €7,508 Leasing rate: €144.90 Bestseller 1 Abrasive belt dimensions: 150 x 2,000 mm Tube diameter: 20–114.3 mm Lever adjustment: 1 Handwheel adjustment: 1 Motor power: 4 kW Weight: 270 kg The new AL150HS 2-in-1 machine: belt grinder and tube notcher. High belt speed with enhanced drive, up to 45 m/s. High-speed advantages: less fine dust, reduced discoloration, 2–3 times longer service life of the grinding belt. The AL150HS model can be operated either with two handwheels or one lever—both options are available on the machine. With the AL150HS, you can notch material from ø20 to ø114.3 mm. The support cross and carriage with swiveling clamp are infinitely adjustable. This allows all tube profiles to be notched at any desired angle between 30° and 90°. The ALMI AL150HS grinds square, rectangular, and round tubes of varying wall thicknesses, and is suitable for all common materials. Thanks to the ALMI belt adjustment system, setting the grinding belt with the supplied hex key is now even easier. The abrasive belt can be quickly tensioned, and changing the contact wheels takes just a few seconds. All tube notchers are equipped with a deburring table. Includes: 5 abrasive belts, 1 contact wheel ø42.4 mm (Product image for illustration only) Giodpfswirqtsx Afqsl

Leto izdelave: 2026, Stanje: novo, Winder for spools up to 10 kg gross Gedpfx Afedlpyujqsil featuring a clamping cone and a traversing device with adjustable traversing width and traversing speed

Stanje: dober (rabljeno), Leto izdelave: 2008, vrsta upravljanja: CNC krmiljenje, Premer cevi iz nerjavečega jekla do 42 x 2,0 mm Premer jeklene cevi do 42 x 3,0 mm Maksimalni kot upogiba +/- 180 + 10° Gsdsx T Diiepfx Afqsil Uporni moment 4,1 cm³ Delovni tlak 6 bar Skupna potrebna moč 5,5 kW Teža stroja pribl. 3 t Dimenzije pribl. 6100 x 2300 x 1300 mm

Stanje: rabljeno, Leto izdelave: 1992, Tehnične podrobnosti: Premer cevi: 6 mm Maks. premer cevi: 16 mm Maks. kotni upogib: 90 ° električna izvedba – napetost/frekvenca: 220 / 50 V/Hz Skupna priključna moč: 0,75 kW Teža stroja cca.: 0,145 t Dimenzije stroja D x Š x V: cca. 1,0 x 0,8 x 1,2 m Področje uporabe: Mini cevni upogibalnik s prostim upogibnim vodilom. Obdelava preciznih jeklenih cevi po DIN 2391/C, material 35.4 NBK Ø 6 - 16 mm. -s hidravličnim pogonom -8x predizbor upogibnih kotov do 180° -cevni prislon 1 m gumb za zaustavitev v sili -pomični z nožno zavoro Gjdpfx Afowivn Neqoil -vrtalna glava nihajna (navpično v vodoravnem položaju) potrebno hidravlično olje = cca. 20 litrov (npr. Esso Nuto 32) Pribor: različna orodja za upogibanje

Stanje: rabljeno, Leto izdelave: 2015, Operating hours laser on: 32,824 h Operating hours beam on: 28,572 h Laser power: 3,000 kW Max. mild steel: 8 mm Max. stainless steel: 5 mm Max. aluminium: 6 mm Max. copper: 4 mm Max. brass: 4 mm Length: 18,000 mm Width: 9,000 mm Height: 2,800 mm Machine weight: 21,000 kg Max. tube workpiece length: 6,500 mm Gedpfx Afeuqdg Toqoil Max. finished part length: 4,500 mm Max. sleeve outer diameter: 152 / 170 mm Min. sleeve outer diameter: 12 mm Max. tube weight: 25 kg/m Standard equipment Machine: Rigid machine frame, tube support for raw material with automatically retractable pipe supports, push-through chuck with self-centering parallel clamping rollers, high-precision drives, LoadMaster Tube 6.5m with bundle loading compartment, discharge station, part deposit area, finished part tube support with extendable guide rollers, scrap conveyor belt with bin Enclosed beam guidance via fiber optic cable (LLK) PierceLine NitroLine FocusLine Programmable cutting gas pressure Automatic shut-off Ergonomic control console with touch color display Trumpf TruLaser: external solid-state laser TruDisk 3001 with 1 LLK output, diode-pumped disk laser with 1.03 nm wavelength, excitation via pump diodes, laser power control, laser logbook function Cutting unit: universal cutting unit, single-head cutting strategy, ControlLine Control system: Sinumerik 840 D SL, easy operation, online help, integrated technology tables, teleservice via internet Data transfer: RJ45 network connection, USB Safety: CE marking, multi-beam light barriers, monitoring system for gas pressure, temperature and cooling water, compact extraction unit, safety enclosure with certified safety glass Optional equipment - RapidCut technology package - Bevel cut - finished part length +1.5 m (up to 4.5 m) - SeamLine Tube - Wireless Operation Point - Low-scratch LoadMaster Tube 6.5 m - Tube diameter 15 mm Automation - LoadMaster Tube 6.5 m with bundle loader

Stanje: dober (rabljeno), Leto izdelave: 2006, 1 CNC Rohrendenumformmaschine Hersteller: BLM Modell: Tube Form M32x1,5 Baujahr: 2006 Technische Daten: - Schubkraft: 3,5 t - Sperrkraft: 5 t - Arbeitshub: 130 mm - Werkzeugdurchmesser: 80 mm - Abmessungen (L x B x H): 2400 x 1400 x 2000 mm - Anschlussleistung: 12 kVA Giodsn Sm Ddepfx Afqol - Gewicht: 2.200 kg

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), Tip: HRA4/80-4 Gijdpfshmfh Hex Afqel Cevi: Ø 6 ÷ 24 mm, debelina stene = 1 ÷ 2,5 mm • Konica: Ø3 ÷ 12 mm

Stanje: rabljeno, Leto izdelave: 2005, stiskalna sila: 1.600 t, teža obdelovanca (maks.): 25 kg, We are offering directly on behalf of the owner: Manufacturer: Graebener Maschinentechnik Model: GRNM Year of manufacture: 2005 Bending force max.: 16,000 kN (1,600 t) Tooling length: 1,600 mm Data at 520 N/mm²: Pipe diameter max.: 1,524 mm Pipe diameter min.: 457 mm Plate thickness max.: 40 mm Gisdpfx Aex Tvcnefqjl Pipe length max.: 13.2 m Pipe length min.: 6 m Pipe weight max.: 25 t Total connected load approx.: 245 kW / 400 V / 50 Hz Required floor space approx.: 27 x 3 m Total weight approx.: 90 t / Base machine approx. 65 t Further technical data and details available on request or see data sheets in the photos / PDF. The machine is from 2005, was in operation until 2021, and has been professionally dismantled and packed for transport.

Stanje: dober (rabljeno), Leto izdelave: 1998, Premer cevi: 20 - 60,3 mm Giodpfx Aox T Dhfjfqol Dolžina natikanja cevi: 4500 mm Približna masa stroja: 0,11 t Skupna potrebna moč: kW Potreben prostor pribl.: ca. 5700 x 1600 x 900 mm - Predizbira 4 kotov upogibanja z obračalnim regulatorjem

Stanje: rabljeno, Leto izdelave: 1990, Technical details: Tube diameter: 42 mm Wall thickness: 2.5 mm Round steel: max. Ø 20 mm Square material: tube 25 x 25 mm Maximum bending radius: inner max. Ø 20 mm and outer max. Ø 170 mm Bending speed: not specified °/s Tube feed length: 3000 mm Control: Software RC 7000 Machine weight approx.: 2.8 t Control cabinet dimensions: 800 x 700 x 2000 mm Machine dimensions (LxWxH) approx.: 5.1 x 0.7 x 2.0 m Gedpfx Afeu Ibvujqoil Application: Machining of deformable tubes, rectangular tubes, round bars, and square tubes Software designation: RC7000, programming manual Rectangular tube: 42 x 20 x 2.5 mm Bending direction: left Operation via control panel Accessories: -various bending tools for tube Ø 25 mm -12 various clamping collets -various auxiliary and clamping devices

Leto izdelave: 1986, Stanje: skoraj kot novo (rabljeno), Dalsze informacje na życzenie Gedpfxehmfnhs Afqsil

Stanje: dober (rabljeno), Leto izdelave: 1994, vrsta upravljanja: CNC krmiljenje, proizvajalec krmilnikov: Siemens, model krmilnika: 840 D, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190° Power supply: 400 V / 50 Hz / 85 A Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Approximate machine weight: 33 t Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control unit: NCU system - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tools are available: Pipe Ø 48.3 mm; radius 105 mm Pipe Ø 60.3 mm; radius 120 mm Pipe Ø 63.5 mm; radius 150 mm Gijdox T Dgujpfx Afqjl Pipe Ø 76.1 mm; radius 190 mm Pipe Ø 88.9 mm; radius 222 mm Pipe Ø 114.3 mm; radius 285 mm Pipe Ø 139.7 mm; radius 350 mm Pipe Ø 141.3 mm; radius 700 mm Pipe Ø 168.3 mm; radius 420 mm There were a few mandrels with a marking engraved directly on them. These had the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outside diameters of the mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approximately €150,000.

Leto izdelave: 1994, Stanje: rabljeno, Tehnične podrobnosti: Debelina pločevine: 1,0 mm Premer cevi: 60 / 80 / 90 / 100 / 110 / 120 / 130 mm Debelina stene: 0,6 / 0,7 / 1,0 mm Dolžina vlečenja cevi: 150 - 1000 mm Krmiljenje programa: SPS Simatic S 5 Potreben zračni tlak: 5 bar Obratovalna napetost: 380 V Krmilna napetost: 24 V Skupna potrebna moč: 3,5 kW Dimenzije D x Š x V: 1,2 x 1,0 x 1,6 m Stroj za vlečenje cevi, trenutno opremljen za Ø 130 mm. Uporaba: npr. za pečarske cevi, cevi se valjajo na želene dimenzije Giodpfx Afou Icv Aeqel – Vstavljanje in odstranjevanje obdelovancev je ročno – Upravljanje preko upravljalne plošče – Samodejni in nastavljivi način delovanja Dodatne značilnosti: Debeline pločevine: 0,6 / 0,7 / 1,0 mm Dolžina obdelovanca 150 - 1000 mm Različen pribor/orodja za Ø 120 in Ø 130 mm ter drugo, kot na fotografiji *

Stanje: rabljeno, Leto izdelave: 1993, Technical Details: Tube diameter: 80 mm Minimum tube diameter: 6 mm Control unit for program: Gelma MM-1 Gisdpeu Ibyyefx Afqel Tube feed length: 1800 mm Approx. machine weight: 0.232 t Machine dimensions (LxWxH): approx. 1.9 x 0.7 x 1.3 m Semi-automatic TUBE BENDING MACHINE Operating modes: manual and semi-automatic operation Application: for multiple, repeatable bending operations of tubes (e.g. hydraulic piping) The swiveling unit with pre-selection for 3 different bending angles, usable in single or automatic mode. Currently, the machine is equipped with a stop rod for a tube size of Ø 10 mm for 6 angle settings. Bending radius depends on the material used. The tube bending machine is mobile/movable. Equipment/Accessories: 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm