Torsionally Mehke Cevi nakup rabljenega (7.584)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 34.797 h, številka stroja/vozila: 2011-0250, Premer cevi (maks.): 600 mm, Dolžina cevi (maks.): 1.500 mm, Kot upogiba (maks.): 180 °, radij upogibanja (maks.): 200 mm, debelina stene: 3 mm, Original machine year of manufacture: 1996. Completely overhauled by the manufacturer in 2011 at a cost of approx. €250,000: electrical and mechanical systems extensively renewed. TECHNICAL DETAILS Hfsdpfx Afjx Srkls Tjb Tube diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + springback Tube length: 400 - 1,500 mm Tube outer diameter: 28 mm - 60 mm Material parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Motion parameters Bending direction: left Forward bending speed: max. 22.0 rpm (infinitely variable) Return bending speed: constant 22.0 rpm Rotation angle: max. 360° Rotational speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Height adjustment travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Operator console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic tank volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning unit: NTB version Control unit: Schwarze-Robitec operator and control console EQUIPMENT - Automatic cold tube bending machine - Tube positioning unit - Gripper - Schwarze-Robitec tube magazine - Hydraulic drive for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and return - Various bending tools for Ø 60 mm tube - Various accessories - Control cabinet cooling unit - Foot switch (2-way) - Schwarze-Robitec operator console - Rittal control cabinet cooling unit type SK 3361100 Note: Due to lack of operator knowledge, the machine could only be tested in setup mode. No faults are known. The machine is currently dismantled.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Opis stroja: Visoko zmogljiv planetarni brusilnik, zasnovan za končno obdelavo površin (brušenje, satiniranje in poliranje) okroglih in ovalnih profilov. Model ML 100 3Z je opremljen s tremi neodvisnimi brusnimi enotami, ki omogočajo doseganje želene hrapavosti površine v enem samem prehodu. Glavne prednosti: Planetarni sistem: Brusni trakovi rotirajo okoli cevi, medtem ko se sam material ne vrti. To omogoča varno obdelavo izjemno dolgih ali rahlo ukrivljenih cevi. Visoka učinkovitost (3Z): Zaradi treh postaj lahko kombinirate različne granulacije (npr. od grobega brušenja do finega sijaja) brez potrebe po menjavi trakov med operacijami. Vsestranost: Idealno za nerjaveče jeklo, aluminij, medenino in druge kovine do premera cca 114 mm. Kakovost površine: Zagotavlja popolnoma enakomerno obdelavo po celotnem obodu brez vidnih spojev. Stroj je v dobrem tehničnem stanju. Po dogovoru je možen preizkus. Brusilnik je idealen za obdelavo ravnih okroglih ali ovalnih cevi. Ima orbitalni sistem, ki omogoča večnamensko uporabo. Podajanje obdelovancev in odpiranje trakov je avtomatsko. Velikost obdelovanca: premer 10–114 mm. Minimalna dolžina obdelovanca pri avtomatskem podajalnem sistemu: 355 mm. Število brusnih trakov: 6 Hsdpfsx Ti I Djx Af Tofb Skupna moč: 14 kW. Hitrost brusnih trakov: 10–30 m/s.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, številka stroja/vozila: 6713-2023-2009, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, Premer cevi (maks.): 60 mm, Dolžina cevi (maks.): 6.000 mm, skupna dolžina: 6.500 mm, skupna širina: 1.000 mm, skupna višina: 1.400 mm, moč: 5,2 kW (7,07 KM), Stroj za krivljenje cevi Gelber Bieger Tip: S03-60 Leto izdelave: 2009 Premer: 03–60 mm Dolžina: 6 m Elektromehanski pogon osi krivljenja PLC krmiljenje Ločljivost kota krivljenja: 0,1° Elektronsko merjenje dolžine in zasuka Ročni sistem z omejitvami s prehodi Hfsdpfx Afoxuii Uo Teb Zasuk v korakih po 15° Hidravlično vpenjanje cevi z nastavljivim pritiskom Programirljivo vračanje trna Tričeljustni vpenjalni tulec Ojačano podaljšanje nosilca trna do 6 m Programska oprema za krivljenje cevi Vključuje orodje za sledeče premere: 50 mm, 42,5 mm, 40 mm, 35 mm, 30 mm, 25 mm, 20 mm Prevzem v tovarni, nepakirano

Stanje: rabljeno, Avtomatski stroj za upogibanje cevi Blagovna znamka: B.L.M. Model: B/90/M Avtomatski stroj za upogibanje cevi, zasnovan za industrijsko uporabo, opremljen z avtomatskim programiranjem za izvedbo več zaporednih upogibov. Stroj omogoča nastavitev oddaljenosti naslona, kar zagotavlja natančnost in ponovljivost procesa upogibanja. Za vse tehnične podrobnosti glejte tehnične liste v fotografijah. Hfedpfx Aox Swbief Tob

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Varilni aparat za sterilne cevi Terumo SCD IIB, kataloška številka 72508, zagotavlja zanesljive in visokokakovostne varjene spoje za sterilne cevne povezave, za cikel varjenja potrebuje le 30 sekund, je kompakten in prenosen, zahteva minimalno tehnično usposabljanje ter ga je mogoče brez težav vključiti v obstoječe procese. Zahteve za cevi: PVC cevi z nazivnim zunanjim premerom 5,46 mm (0,215 palca) in debelino stene 0,84 mm (0,033 palca) ali C-Flex cevi z nazivnim zunanjim premerom 6,35 mm (0,25 palca) in nazivnim notranjim premerom 3,18 mm (0,125 palca). Hedpfsuyu N Esx Af Tofb V dobrem delovnem stanju. Oglejte si tudi naše ostale oglase.

Stanje: novo, Condition: new Delivery time: approx. 2 weeks from order Country of origin: Netherlands Price: €4,646 Grinding belt dimensions: 100 x 2,000 mm Tube diameter: 20 – 76.1 mm Lever adjustment: 1 Handwheel adjustment: 1 Motor power: 3 kW Weight: 220 kg The AL100U-02 model can be operated either with two handwheels or a lever; both options are available on the machine. With the AL100U-02, you can notch material from Ø20 up to Ø76 mm. The support cross and the carriage with a rotating clamp are infinitely adjustable. This allows all tube profiles to be notched at any desired angle between 30° and 90°. The ALMI AL100U-02 processes square, rectangular, and round tubes of various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, adjusting the sanding belt with the supplied hex key is now even easier. The sanding belt can be quickly tensioned, and changing the grinding rollers is completed within seconds. All tube notchers come equipped with a deburring table as standard. Includes: 5 sanding belts, 1 grinding roller Ø42.4 mm Hfodjwir Dmopfx Af Tjb

Stanje: rabljeno, Leto izdelave: 2008, - Proizvajalec Efsen/Cefla - Tip Woodcure 1400 - Leto izdelave UV 2008, Transport/Transportni sistem 1998 - Delovna širina 1.300 mm (1.445 mm) - Delovna višina 870 ± 20 mm - Največja višina delov 70 mm - Število cevi zgoraj 2 kosa - Cevi postavljene naravnost 2 kosa - Moč cevi 120 W/cm - Primerno za živosrebrne cevi - Primerno za galijeve cevi - Proizvajalec transportnega sistema Cefla - Paletni transport, dolžina 3.500 m - Razmak med palicami 95 mm - Hitrost podajanja nastavljiva preko ročnega kolesa ~ 5-25 m/min - Vgradna dolžina: 3.500 mm - Širina: pribl. 2.100 mm - Volt, Hz 400/50 - Skupna električna priključna moč 38 kW - Največje nihanje napetosti ± 5 % Hodpfx Aevupdcjf Tsfb

Stanje: rabljeno, Nouvel appareil de montage de flexibles DAEWOO type DA5100-HC Presse à flexibles hydraulique, presse à flexibles d’atelier pour sertissage de raccords de flexibles N° de série : 25DW05950ALE01 Année de fabrication : 2025 Force de sertissage : 500 tonnes Plage de sertissage : Ø 1/4 à 2" (15-63 mm) Ouverture max. de la matrice : env. 75 mm Débit de la pompe : 6 L/min Capacité de travail : 200 pcs/h Pression hydraulique : 315 bars Puissance moteur : 3 kW Alimentation : 400 V, 50 Hz - 2 modes de fonctionnement : manuel et automatique - Commande par bouton-poussoir ou pédale - Réglage du trajet de pressage par vis moletée - Changement rapide pour le passage à d’autres diamètres de flexibles Les mors s’insèrent facilement dans les guides et sont maintenus magnétiquement Hfodpfx Aex Srwfof Tsb - 10 jeux d’outils, matrices de sertissage (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Socle d’armoire avec unité hydraulique Dimensions (L x l x H) : 700 x 500 x 1250 mm Poids : 270 kg Neuf – jamais utilisé

Stanje: rabljeno, Leto izdelave: 1999, Pipe diameter up to 60 mm Hjdpfx Aovvnm Sef Tsfb Machine weight approx. 1.8 t

Stanje: dober (rabljeno), Leto izdelave: 2005, vrsta upravljanja: CNC krmiljenje, - Največji kot upogibanja: +/- 180 + 10 ° - Dolžina potiska cevi: 4100 mm - Okrogla cev iz jekla do 30 x 2,2 mm² - Okrogla cev iz nerjavečega jekla do 30 x 1,5 mm Hedpfx Afox T Di Ao Tjfb - Kvadratne cevi: 20 x 2,5 mm - Čas upogiba 90 stopinj: 1,5 s (predhodni pomik) - Hitrost vzdolžnega pomika: 450 mm/s - Največji radij: 125 mm - Samostoječa upogibna glava, dolžina 850 mm - Pogon upogibne osi: elektrohidravlični

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rems Tornado 2010 stroj za rezanje cevi Hodporzu T Aofx Af Tsfb Dobro delujoče stanje. Oglejte si tudi naše druge oglase.

Stanje: novo, Condition: New Delivery time: approx. 2–4 weeks from order Country of origin: Netherlands Price: €7,508 Leasing rate: €144.90 Bestseller 1 Abrasive belt dimensions: 150 x 2,000 mm Tube diameter: 20–114.3 mm Lever adjustment: 1 Handwheel adjustment: 1 Motor power: 4 kW Weight: 270 kg Hfodpfxewirqte Af Teb The new AL150HS 2-in-1 machine: belt grinder and tube notcher. High belt speed with enhanced drive, up to 45 m/s. High-speed advantages: less fine dust, reduced discoloration, 2–3 times longer service life of the grinding belt. The AL150HS model can be operated either with two handwheels or one lever—both options are available on the machine. With the AL150HS, you can notch material from ø20 to ø114.3 mm. The support cross and carriage with swiveling clamp are infinitely adjustable. This allows all tube profiles to be notched at any desired angle between 30° and 90°. The ALMI AL150HS grinds square, rectangular, and round tubes of varying wall thicknesses, and is suitable for all common materials. Thanks to the ALMI belt adjustment system, setting the grinding belt with the supplied hex key is now even easier. The abrasive belt can be quickly tensioned, and changing the contact wheels takes just a few seconds. All tube notchers are equipped with a deburring table. Includes: 5 abrasive belts, 1 contact wheel ø42.4 mm (Product image for illustration only)

Stanje: novo, Leto izdelave: 2025, Laser power: 6,000 watts Round tube: 15 - 350 mm Square tube: 15 x 15 - 350 x 350 mm Rectangular tube: 15 x 15 - 350 x 350 mm Max. positioning accuracy X, Y axis: 0.05/1000 mm Max. positioning accuracy U axis: 0.05/1000 mm Max. mild steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm Max. tube weight: 40 kg/m Max. tube weight: 240 kg Length: 17,296 mm Width: 4,271 mm Height: 2,933 mm Standard equipment: Working range of tube diameter Round tube: 20 mm - 350 mm Square tube: 20 - 350 mm Rectangular tube: 20 x 20 mm - 350 x 350 mm Hfedpfjxgc Arox Af Teb Minimum clamping tube thickness: ≥1 mm Y-axis travel: 9,100 mm Z-axis travel: 4,000 mm X-axis travel: 400 mm Max. loading length: 9,200 mm Max. unloading length: 6,000 mm X,Y-axis positioning accuracy: +/-0.05 mm/1000 mm X,Y-axis repeatability: +/-0.05 mm/1000 mm Max. rotational U-axis positioning speed: 100 RPM Max. X/Y-axis acceleration: 1.0 G X-axis rapid traverse speed: ≤50 m/min Max. loading capacity per tube: ≤133 kg/m Machine operating temperature: 20℃ - 40℃

Stanje: rabljeno, Leto izdelave: 2001, Technical details: Tube diameter: 74 mm Wall thickness: 5 mm Tube diameter min.: 10 mm Tube diameter max.: 74 mm Round bar material (steel): max. 40 mm Control system: Trumpf Rohrtechnik IsoBend 2.0 Bending radius max.: max. 300 mm / min. 65 mm Bending angle max.: max. 195° / min. 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Tube loader length: 3000 mm Hydraulic operating pressure: operating pressure max. 300 bar Total power requirement: 43 kVA Machine weight approx.: 8.5 t Machine dimensions (LxWxH) approx.: 6.5 x 1.6 x 1.6 m Control panel dimensions (LxWxH): 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine with bending head and pivot arm (cold bending machine). Applications: Suitable only for processing tubes, round bars, and wires made of steel, stainless steel, and non-ferrous metals. The cross-slide of the bending head offers the following advantages: - Freely programmable X and Y axes - Cross-slide level change: travel = 300 mm (vertical position freely programmable) and max. horizontal movement 350 mm Hedpfxeu Ibvhj Af Tefb - Bending dies of different sizes within a bending die stack can be approached at will. The bending direction is to the right. Trumpf Rohrtechnik IsoBend 2.0 control software Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec and max. acceleration 1100 mm/sec) In good condition.

Stanje: rabljeno, Leto izdelave: 1999, Premer cevi: 12-54 mm (baker / inox) mm Serijska številka: EBD Način delovanja: Rezanje/ Odstranjevanje igel / Pon Hfodpfxoumyhls Af Tob Hitrost valjev: 450 obr/min m/min

Stanje: dober (rabljeno), Leto izdelave: 2008, vrsta upravljanja: CNC krmiljenje, Premer cevi iz nerjavečega jekla do 42 x 2,0 mm Premer jeklene cevi do 42 x 3,0 mm Hedsx T Diiopfx Af Tefb Maksimalni kot upogiba +/- 180 + 10° Uporni moment 4,1 cm³ Delovni tlak 6 bar Skupna potrebna moč 5,5 kW Teža stroja pribl. 3 t Dimenzije pribl. 6100 x 2300 x 1300 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Rohrdurchmesser 42.0 x 3.0 STAHL mm Rohrdurchmesser 30.0 x 2.0 EDELST mm Biegewinkel max. 180 ° Biegeradius max. 100 mm Biegegeschwindigkeit 2.0 U/min. Steuerung NC Spannung 400 V Gesamtleistungsbedarf 0.55 kW Maschinengewicht ca. 115 kg aktueller Neupreis ca. 4.200 Euro sehr guter Zustand / mit Untergestell Beschreibung: - NC elektro-motorische Rohrbiegemaschine - dornlos * bis zu 50 Programme speicherbar - fährt automatisch in die Ausgangsposition zurück Hodjx U El Iepfx Af Tjfb - mit maximaler Biegeleistung Stahlrohr 42 x 3.0 mm - exzellente Biegequalität bei sehr engen Biegeradien (ab 2x Rohr-Ø) . & Biegewinkeln zwischen 0° bis 180° - einfache Bedienung - hohe Genauigkeit und Zuverlässigkeit - schneller Werkzeugwechsel (innnerhalb weniger Sekunden) - einfach zu transportieren - inklusive Maschinen-Untergestell

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Line for the production of circular and square/rectangular tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Other diameter ranges can be achieved by manufacturing an appropriate set of forming rolls. The tube or closed profile is formed by rolling a steel strip of suitable width and thickness using a series of rollers, followed by TIG welding. During production, it undergoes multiple processing operations, including: a) weld (seam) grinding b) calibration c) straightening d) cutting The finished product—"raw tube"—is subject to further processing to obtain the required surface finish. There are two methods for surface treatment: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube mill is equipped with automated TIG welding from SAF: a) 2 pcs Tricathode NERTAMATIC 300 TR TIG inverters b) 1 pc Tricathode NETRINOX TH 500 TIG inverter c) Welding of products with wall thickness 0.5 - 1.5 mm – torch E16 d) Welding of products with wall thickness 1.5 - 3.5 mm – torch E25 e) RETRISAF cooling system 1.1 Steel strip decoiler for supporting and unwinding coils 1.2 Forming stations: a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – three-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – for cutting the product to required lengths Additional line equipment: 1.8 Four-station tube grinder Bossi Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Two-station tube polisher Bossi Type: CP 400-2U Hjdpfx Afjxmiirs Tofb

Stanje: rabljeno, Leto izdelave: 2015, Operating hours laser on: 32,824 h Operating hours beam on: 28,572 h Laser power: 3,000 kW Max. mild steel: 8 mm Max. stainless steel: 5 mm Max. aluminium: 6 mm Max. copper: 4 mm Max. brass: 4 mm Length: 18,000 mm Width: 9,000 mm Height: 2,800 mm Machine weight: 21,000 kg Max. tube workpiece length: 6,500 mm Max. finished part length: 4,500 mm Max. sleeve outer diameter: 152 / 170 mm Min. sleeve outer diameter: 12 mm Max. tube weight: 25 kg/m Standard equipment Machine: Rigid machine frame, tube support for raw material with automatically retractable pipe supports, push-through chuck with self-centering parallel clamping rollers, high-precision drives, LoadMaster Tube 6.5m with bundle loading compartment, discharge station, part deposit area, finished part tube support with extendable guide rollers, scrap conveyor belt with bin Enclosed beam guidance via fiber optic cable (LLK) Hedpfxeuqdg Ts Af Tsfb PierceLine NitroLine FocusLine Programmable cutting gas pressure Automatic shut-off Ergonomic control console with touch color display Trumpf TruLaser: external solid-state laser TruDisk 3001 with 1 LLK output, diode-pumped disk laser with 1.03 nm wavelength, excitation via pump diodes, laser power control, laser logbook function Cutting unit: universal cutting unit, single-head cutting strategy, ControlLine Control system: Sinumerik 840 D SL, easy operation, online help, integrated technology tables, teleservice via internet Data transfer: RJ45 network connection, USB Safety: CE marking, multi-beam light barriers, monitoring system for gas pressure, temperature and cooling water, compact extraction unit, safety enclosure with certified safety glass Optional equipment - RapidCut technology package - Bevel cut - finished part length +1.5 m (up to 4.5 m) - SeamLine Tube - Wireless Operation Point - Low-scratch LoadMaster Tube 6.5 m - Tube diameter 15 mm Automation - LoadMaster Tube 6.5 m with bundle loader

Stanje: rabljeno, Leto izdelave: 1992, Tehnične podrobnosti: Premer cevi: 6 mm Maks. premer cevi: 16 mm Maks. kotni upogib: 90 ° električna izvedba – napetost/frekvenca: 220 / 50 V/Hz Skupna priključna moč: 0,75 kW Teža stroja cca.: 0,145 t Dimenzije stroja D x Š x V: cca. 1,0 x 0,8 x 1,2 m Področje uporabe: Mini cevni upogibalnik s prostim upogibnim vodilom. Obdelava preciznih jeklenih cevi po DIN 2391/C, material 35.4 NBK Ø 6 - 16 mm. -s hidravličnim pogonom -8x predizbor upogibnih kotov do 180° -cevni prislon 1 m gumb za zaustavitev v sili -pomični z nožno zavoro -vrtalna glava nihajna (navpično v vodoravnem položaju) potrebno hidravlično olje = cca. 20 litrov (npr. Esso Nuto 32) Pribor: Hjdpfx Ajwivn Nef Tjfb različna orodja za upogibanje

Stanje: dober (rabljeno), Leto izdelave: 1998, Premer cevi: 20 - 60,3 mm Dolžina natikanja cevi: 4500 mm Približna masa stroja: 0,11 t Skupna potrebna moč: kW Potreben prostor pribl.: ca. 5700 x 1600 x 900 mm Hfodpjx T Dhfefx Af Tob - Predizbira 4 kotov upogibanja z obračalnim regulatorjem

Stanje: rabljeno, Leto izdelave: 1990, Technical details: Tube diameter: 42 mm Wall thickness: 2.5 mm Round steel: max. Ø 20 mm Square material: tube 25 x 25 mm Maximum bending radius: inner max. Ø 20 mm and outer max. Ø 170 mm Bending speed: not specified °/s Tube feed length: 3000 mm Control: Software RC 7000 Machine weight approx.: 2.8 t Control cabinet dimensions: 800 x 700 x 2000 mm Machine dimensions (LxWxH) approx.: 5.1 x 0.7 x 2.0 m Application: Machining of deformable tubes, rectangular tubes, round bars, and square tubes Software designation: RC7000, programming manual Hfsdpfx Afsu Ibvuj Tjb Rectangular tube: 42 x 20 x 2.5 mm Bending direction: left Operation via control panel Accessories: -various bending tools for tube Ø 25 mm -12 various clamping collets -various auxiliary and clamping devices

Stanje: dober (rabljeno), Leto izdelave: 1994, vrsta upravljanja: CNC krmiljenje, proizvajalec krmilnikov: Siemens, model krmilnika: 840 D, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190° Power supply: 400 V / 50 Hz / 85 A Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Approximate machine weight: 33 t Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control unit: NCU system - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tools are available: Pipe Ø 48.3 mm; radius 105 mm Pipe Ø 60.3 mm; radius 120 mm Pipe Ø 63.5 mm; radius 150 mm Pipe Ø 76.1 mm; radius 190 mm Pipe Ø 88.9 mm; radius 222 mm Pipe Ø 114.3 mm; radius 285 mm Pipe Ø 139.7 mm; radius 350 mm Pipe Ø 141.3 mm; radius 700 mm Pipe Ø 168.3 mm; radius 420 mm There were a few mandrels with a marking engraved directly on them. These had the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outside diameters of the mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; Hfodsx T Dgujpfx Af Teb 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approximately €150,000.

Leto izdelave: 1994, Stanje: rabljeno, Tehnične podrobnosti: Debelina pločevine: 1,0 mm Premer cevi: 60 / 80 / 90 / 100 / 110 / 120 / 130 mm Debelina stene: 0,6 / 0,7 / 1,0 mm Dolžina vlečenja cevi: 150 - 1000 mm Krmiljenje programa: SPS Simatic S 5 Potreben zračni tlak: 5 bar Obratovalna napetost: 380 V Krmilna napetost: 24 V Skupna potrebna moč: 3,5 kW Dimenzije D x Š x V: 1,2 x 1,0 x 1,6 m Stroj za vlečenje cevi, trenutno opremljen za Ø 130 mm. Uporaba: npr. za pečarske cevi, cevi se valjajo na želene dimenzije – Vstavljanje in odstranjevanje obdelovancev je ročno – Upravljanje preko upravljalne plošče Hfsdpsu Icv Asfx Af Tob – Samodejni in nastavljivi način delovanja Dodatne značilnosti: Debeline pločevine: 0,6 / 0,7 / 1,0 mm Dolžina obdelovanca 150 - 1000 mm Različen pribor/orodja za Ø 120 in Ø 130 mm ter drugo, kot na fotografiji *

Stanje: rabljeno, Leto izdelave: 1993, Technical Details: Hfodpfxju Ibyys Af Tjb Tube diameter: 80 mm Minimum tube diameter: 6 mm Control unit for program: Gelma MM-1 Tube feed length: 1800 mm Approx. machine weight: 0.232 t Machine dimensions (LxWxH): approx. 1.9 x 0.7 x 1.3 m Semi-automatic TUBE BENDING MACHINE Operating modes: manual and semi-automatic operation Application: for multiple, repeatable bending operations of tubes (e.g. hydraulic piping) The swiveling unit with pre-selection for 3 different bending angles, usable in single or automatic mode. Currently, the machine is equipped with a stop rod for a tube size of Ø 10 mm for 6 angle settings. Bending radius depends on the material used. The tube bending machine is mobile/movable. Equipment/Accessories: 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm