Razvrštanje Stroj Cevi nakup rabljenega (75.935)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 34.797 h, številka stroja/vozila: 2011-0250, Premer cevi (maks.): 600 mm, Dolžina cevi (maks.): 1.500 mm, Kot upogiba (maks.): 180 °, radij upogibanja (maks.): 200 mm, debelina stene: 3 mm, Original machine year of manufacture: 1996. Completely overhauled by the manufacturer in 2011 at a cost of approx. €250,000: electrical and mechanical systems extensively renewed. TECHNICAL DETAILS Tube diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + springback Tube length: 400 - 1,500 mm Tube outer diameter: 28 mm - 60 mm Material parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Duodpfx Aex Srklefljl Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Motion parameters Bending direction: left Forward bending speed: max. 22.0 rpm (infinitely variable) Return bending speed: constant 22.0 rpm Rotation angle: max. 360° Rotational speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Height adjustment travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Operator console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic tank volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning unit: NTB version Control unit: Schwarze-Robitec operator and control console EQUIPMENT - Automatic cold tube bending machine - Tube positioning unit - Gripper - Schwarze-Robitec tube magazine - Hydraulic drive for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and return - Various bending tools for Ø 60 mm tube - Various accessories - Control cabinet cooling unit - Foot switch (2-way) - Schwarze-Robitec operator console - Rittal control cabinet cooling unit type SK 3361100 Note: Due to lack of operator knowledge, the machine could only be tested in setup mode. No faults are known. The machine is currently dismantled.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, številka stroja/vozila: 6713-2023-2009, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, Premer cevi (maks.): 60 mm, Dolžina cevi (maks.): 6.000 mm, skupna dolžina: 6.500 mm, skupna širina: 1.000 mm, skupna višina: 1.400 mm, moč: 5,2 kW (7,07 KM), Stroj za krivljenje cevi Gelber Bieger Tip: S03-60 Leto izdelave: 2009 Premer: 03–60 mm Dolžina: 6 m Elektromehanski pogon osi krivljenja PLC krmiljenje Ločljivost kota krivljenja: 0,1° Dusdexuii Uspfx Aflel Elektronsko merjenje dolžine in zasuka Ročni sistem z omejitvami s prehodi Zasuk v korakih po 15° Hidravlično vpenjanje cevi z nastavljivim pritiskom Programirljivo vračanje trna Tričeljustni vpenjalni tulec Ojačano podaljšanje nosilca trna do 6 m Programska oprema za krivljenje cevi Vključuje orodje za sledeče premere: 50 mm, 42,5 mm, 40 mm, 35 mm, 30 mm, 25 mm, 20 mm Prevzem v tovarni, nepakirano

Stanje: rabljeno, Avtomatski stroj za upogibanje cevi Blagovna znamka: B.L.M. Dujdpsx Swbiefx Aflol Model: B/90/M Avtomatski stroj za upogibanje cevi, zasnovan za industrijsko uporabo, opremljen z avtomatskim programiranjem za izvedbo več zaporednih upogibov. Stroj omogoča nastavitev oddaljenosti naslona, kar zagotavlja natančnost in ponovljivost procesa upogibanja. Za vse tehnične podrobnosti glejte tehnične liste v fotografijah.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rems Tornado 2010 stroj za rezanje cevi Duodpfjrzu T Ajx Aflsl Dobro delujoče stanje. Oglejte si tudi naše druge oglase.

Stanje: novo, Leto izdelave: 2025, Laser power: 6,000 watts Round tube: 15 - 350 mm Square tube: 15 x 15 - 350 x 350 mm Rectangular tube: 15 x 15 - 350 x 350 mm Max. positioning accuracy X, Y axis: 0.05/1000 mm Max. positioning accuracy U axis: 0.05/1000 mm Max. mild steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm Max. tube weight: 40 kg/m Max. tube weight: 240 kg Length: 17,296 mm Width: 4,271 mm Height: 2,933 mm Dusdpfxsxgc Ars Afljl Standard equipment: Working range of tube diameter Round tube: 20 mm - 350 mm Square tube: 20 - 350 mm Rectangular tube: 20 x 20 mm - 350 x 350 mm Minimum clamping tube thickness: ≥1 mm Y-axis travel: 9,100 mm Z-axis travel: 4,000 mm X-axis travel: 400 mm Max. loading length: 9,200 mm Max. unloading length: 6,000 mm X,Y-axis positioning accuracy: +/-0.05 mm/1000 mm X,Y-axis repeatability: +/-0.05 mm/1000 mm Max. rotational U-axis positioning speed: 100 RPM Max. X/Y-axis acceleration: 1.0 G X-axis rapid traverse speed: ≤50 m/min Max. loading capacity per tube: ≤133 kg/m Machine operating temperature: 20℃ - 40℃

Stanje: dober (rabljeno), Leto izdelave: 2006, 1 CNC Rohrendenumformmaschine Hersteller: BLM Modell: Tube Form M32x1,5 Baujahr: 2006 Technische Daten: - Schubkraft: 3,5 t - Sperrkraft: 5 t - Arbeitshub: 130 mm - Werkzeugdurchmesser: 80 mm - Abmessungen (L x B x H): 2400 x 1400 x 2000 mm Dujdpfx Asn Sm Ddoflsl - Anschlussleistung: 12 kVA - Gewicht: 2.200 kg

Stanje: rabljeno, Leto izdelave: 2001, Technical details: Tube diameter: 74 mm Wall thickness: 5 mm Tube diameter min.: 10 mm Tube diameter max.: 74 mm Round bar material (steel): max. 40 mm Control system: Trumpf Rohrtechnik IsoBend 2.0 Bending radius max.: max. 300 mm / min. 65 mm Bending angle max.: max. 195° / min. 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Tube loader length: 3000 mm Hydraulic operating pressure: operating pressure max. 300 bar Duedpfxeu Ibvhj Aflsl Total power requirement: 43 kVA Machine weight approx.: 8.5 t Machine dimensions (LxWxH) approx.: 6.5 x 1.6 x 1.6 m Control panel dimensions (LxWxH): 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine with bending head and pivot arm (cold bending machine). Applications: Suitable only for processing tubes, round bars, and wires made of steel, stainless steel, and non-ferrous metals. The cross-slide of the bending head offers the following advantages: - Freely programmable X and Y axes - Cross-slide level change: travel = 300 mm (vertical position freely programmable) and max. horizontal movement 350 mm - Bending dies of different sizes within a bending die stack can be approached at will. The bending direction is to the right. Trumpf Rohrtechnik IsoBend 2.0 control software Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec and max. acceleration 1100 mm/sec) In good condition.

Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation Duodpfx Afondn Agslsl • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: rabljeno, RGM 3 je univerzálny stroj na opracovanie koncov rúr, ktorý zaujme robustným vyhotovením a malými rozmermi, a preto je ideálny na opracovanie rúr a profilov. Vďaka praktickému rýchloupínaciemu skľučovadlu vpredu a upínaciemu skľučovadlu vzadu umožňuje jednoduchú manipuláciu a rýchle prispôsobenie rôznym priemerom rúr. Stroj je vybavený aj rezačkou rúr a vnútorným odhrotovačom rúr, čím zaisťuje efektívne a presné opracovanie. Okrem toho je RGM 3 vybavený pojazdným podvozkom, ktorý zvyšuje jeho mobilitu. Tento výkonný a robustný stroj od spoločnosti KNUTH je ideálnou voľbou, ak hľadáte efektívne riešenie pre vaše potreby v oblasti spracovania rúr. Stroj RGM 3 si teraz môžete vyžiadať priamo pre vaše použitie, prípadne objednať online a úspešne realizovať vaše projekty opracovania koncov rúr. Dodpouxc Rhofx Afljul

Stanje: novo, Leto izdelave: 2026, Mandrelless Tube Bending Machine RB 54 – NC controlled, with large program memory Item number: 4300054 NC control for setting bending angles Up to 50 programs storable High-quality, robust construction Rapid tool change Fully motorized drive Automatically returns to starting position TECHNICAL DATA General Information Maximum bending radius: 162 mm Maximum bending angle: 210° Bending speed: 2 rpm Torque: 2,341 Nm Dimensions and Weights Length (approx.): 600 mm Width/Depth (approx.): 220 mm Height (approx.): 470 mm Net weight (approx.): 107 kg Dusdpfx Ajvk Scgeflol Bending Capacities Bending capacity, tube material 420 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity, tube material 350 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity, tube material 650 N/mm² (Ø x wall thickness): 42 x 3 mm Electrical Data Drive motor power: 1.1 kW Connection voltage: 400 V Mains frequency: 50 Hz Location: ex stock - immediately available -

Stanje: rabljeno, Leto izdelave: 2015, Operating hours laser on: 32,824 h Operating hours beam on: 28,572 h Laser power: 3,000 kW Max. mild steel: 8 mm Max. stainless steel: 5 mm Max. aluminium: 6 mm Max. copper: 4 mm Max. brass: 4 mm Length: 18,000 mm Width: 9,000 mm Height: 2,800 mm Machine weight: 21,000 kg Max. tube workpiece length: 6,500 mm Max. finished part length: 4,500 mm Max. sleeve outer diameter: 152 / 170 mm Min. sleeve outer diameter: 12 mm Max. tube weight: 25 kg/m Standard equipment Machine: Rigid machine frame, tube support for raw material with automatically retractable pipe supports, push-through chuck with self-centering parallel clamping rollers, high-precision drives, LoadMaster Tube 6.5m with bundle loading compartment, discharge station, part deposit area, finished part tube support with extendable guide rollers, scrap conveyor belt with bin Enclosed beam guidance via fiber optic cable (LLK) PierceLine NitroLine FocusLine Programmable cutting gas pressure Automatic shut-off Ergonomic control console with touch color display Trumpf TruLaser: external solid-state laser TruDisk 3001 with 1 LLK output, diode-pumped disk laser with 1.03 nm wavelength, excitation via pump diodes, laser power control, laser logbook function Cutting unit: universal cutting unit, single-head cutting strategy, ControlLine Control system: Sinumerik 840 D SL, easy operation, online help, integrated technology tables, teleservice via internet Data transfer: RJ45 network connection, USB Safety: CE marking, multi-beam light barriers, monitoring system for gas pressure, temperature and cooling water, compact extraction unit, safety enclosure with certified safety glass Optional equipment - RapidCut technology package - Bevel cut - finished part length +1.5 m (up to 4.5 m) - SeamLine Tube - Wireless Operation Point - Low-scratch LoadMaster Tube 6.5 m Djdpfeuqdg Tex Afljul - Tube diameter 15 mm Automation - LoadMaster Tube 6.5 m with bundle loader

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 1.000 h, številka stroja/vozila: CA520SR--10691, Maks.premer cevi 20mm Min.premer cevi ----- Maks.radius krivljenja 60mm Min.radius krivljenja 16mm Maks.višina orodja ----- Min.višina orodja 30mm Delovna višina 1290mm Dolžina 1600mm Širina 910mm Višina 1520mm Teža stroja 1250kg V paketu je vključen tudi nakladalnik cevi, transportni trak in varnostna ograja. Duedpfx Afoitcr Rsljl

Stanje: rabljeno, Leto izdelave: 1992, Tehnične podrobnosti: Premer cevi: 6 mm Maks. premer cevi: 16 mm Maks. kotni upogib: 90 ° električna izvedba – napetost/frekvenca: 220 / 50 V/Hz Skupna priključna moč: 0,75 kW Teža stroja cca.: 0,145 t Dimenzije stroja D x Š x V: cca. 1,0 x 0,8 x 1,2 m Dodpfowivn Nex Aflsul Področje uporabe: Mini cevni upogibalnik s prostim upogibnim vodilom. Obdelava preciznih jeklenih cevi po DIN 2391/C, material 35.4 NBK Ø 6 - 16 mm. -s hidravličnim pogonom -8x predizbor upogibnih kotov do 180° -cevni prislon 1 m gumb za zaustavitev v sili -pomični z nožno zavoro -vrtalna glava nihajna (navpično v vodoravnem položaju) potrebno hidravlično olje = cca. 20 litrov (npr. Esso Nuto 32) Pribor: različna orodja za upogibanje

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine Duedpeng Exasfx Aflsl • Service contracts, maintenance on site

Stanje: novo, Model EM 250 je zmogljiv stroj za obdelavo koncev cevi iz kategorije strojev za obdelavo cevi in profilov, ki je popolna izbira za vse vrste obdelave cevi, profilov in ploščatega materiala. Ta stroj zanesljivo odstranjuje ostružke in robove z obdelovancev, tako na notranji kot zunanji strani, ne da bi pri tem spremenil rezalni rob. Opremljen je s stabilno žično krtačo, ki zagotavlja učinkovito obdelavo v delavnicah tako obrti kot industrije. Model EM 250 je dobavljen z robustnim strojnim podstavkom in omogoča priklop zunanjega odsesavanja. Posebnost so okrogle žične krtače, na voljo v različnih debelinah žice, tudi za obdelavo nerjavnega jekla. Poleg tega prejmete 5-letno garancijo na pogonski motor. Ta stroj za obdelavo cevi je odlična dopolnitev vaši proizvodni liniji. Naročite EM 250 zdaj – popolna izbira za obdelavo cevi in profilov. Dedpfx Afeu E H Tgjlsul

Stanje: pripravljen za uporabo (rabljen), PEDDINGHAUS ŠKARJE ZA PLOŠČATI, PROFILNI IN PALICNI JEKEL Z IZSEKAČEM IN LUKNJAČEM TIP: 210 AD/13 ŠT. STROJA: GJ 3730 Dsdpfx Afsxc Ep Teleul LETO IZDELAVE: 1970 Oprema: - Različni luknjači in matrice (glej fotografijo) - Standardna oprema - Orodja za upravljanje - 2 kos pedala za enkratni/stalni hod - Dokumentacija Stanje: Preverjeno v delavnici, delujoče

Stanje: novo, Leto izdelave: 2025, Stroj za upogibanje cevi Zopf Model KB 100: Kapaciteta največji premer cevi 100x5 mm St. 37 Kvadratni profili 80x80x3 mm Polni material 45 mm Dusdox I Afxopfx Aflol Največji premer orodja 900 mm Kot upogiba do 210 stopinj Hitrost upogibanja 0 - 2,2 obr/min Motor 11 kW 400 V 50 Hz 3 faze Teža 1850 kg Dimenzije 140x80x160 cm - Digitalni prikaz - Programabilen kot upogiba - S nožnim pedalom - Z inverterjem - Močan motor in reduktorski menjalnik za visok navor - Krmiljenje za nastavitev upogibnega kota - Števec za pomik nasprotnega ležišča - Mobilna upravljalna plošča - Hitra menjava orodij - Vsa gredila kaljena in brušena - Ročno vpenjanje materiala - Delovna plošča CK 45

Stanje: rabljeno, Leto izdelave: 1992, Proizvajalec: Norden Model: Nordenmatic 700 Letnik: 1992 Tip: Avtomatski stroj za polnjenje in zapiranje tub Kapaciteta: največ 70 tub Volumen polnjenja: 1 - 300 ml Natančnost doziranja: +/- 0,1-0,5% Razpon velikosti tub: Dolžina: 50-250 mm / Premer: Ø 10-50 mm Podajanje praznih tub: avtomatsko Duodpfxsx R D Exs Aflsl Čiščenje + naprava za orientacijo tub s koračnim motorjem Tesnilni modul: HA - vroči zrak Število vedric: 22 kosov Dovodni lijak za produkt + dozirna črpalka Vulcanic Vulcatherm hladilna enota (leto: 2004) - 3,5 kW (10°C - 35°C) / Izhodna temperatura: največ 25°C - min. 3°C Laminarni tok Dimenzije stroja: 135 x 190 x 210 cm Teža: 2.400 kg Rezervni deli so priloženi stroju. Na izbiro sta dva formata med več možnimi formati (dodatne formate je mogoče dodati kot opcijo). Na voljo je popolna dokumentacija. Na voljo je video delovanja stroja.

Stanje: rabljeno, Leto izdelave: 1990, Technical details: Dedpfju Ibvuox Afloul Tube diameter: 42 mm Wall thickness: 2.5 mm Round steel: max. Ø 20 mm Square material: tube 25 x 25 mm Maximum bending radius: inner max. Ø 20 mm and outer max. Ø 170 mm Bending speed: not specified °/s Tube feed length: 3000 mm Control: Software RC 7000 Machine weight approx.: 2.8 t Control cabinet dimensions: 800 x 700 x 2000 mm Machine dimensions (LxWxH) approx.: 5.1 x 0.7 x 2.0 m Application: Machining of deformable tubes, rectangular tubes, round bars, and square tubes Software designation: RC7000, programming manual Rectangular tube: 42 x 20 x 2.5 mm Bending direction: left Operation via control panel Accessories: -various bending tools for tube Ø 25 mm -12 various clamping collets -various auxiliary and clamping devices

Stanje: novo, Features: Bending radii: R10 to R200 (min. R = 1.8 x D) (depending on wall thickness, material, and tube diameter) Max. bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30, each with up to 9 bends Duodpsuudrksfx Afljl Control: NC1 Bending direction: counterclockwise Usable length (available in various lengths as required): 1.5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3 m version) Weight: approx. 600 kg (with 3 m mandrel) NOTE: The quoted price refers to the 1.5 m length. Other lengths available upon request! Premature mandrel retraction Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Capacity: Hard copper and aluminium: 60 x 4 mm Steel tube: 60 x 3 mm Stainless steel: 60 x 2 mm Scope of delivery: Machine Standard accessories (incl. foot switch, operating manual, 2 hex keys, 4 sets of clamping jaws, bending grease, 25 mm mandrel rod) Supplied without hydraulic oil

Stanje: novo, The KPB 81 is a powerful tube and profile bending machine from the KNUTH series that combines maximum bending performance with modern mechanical engineering. Equipped with three motor-driven rolls and hardened rollers and shafts, it ensures precise bending of medium and heavy steel profiles. The hydraulically adjustable bending rollers not only provide high drive power but also allow for optimal adaptation to various profile shapes. Additionally, the KPB 81 features an adjustable overload protection system and the capability for both horizontal and vertical operation. Standard equipment includes a digital display, a control panel, and a foot switch with an emergency stop function. This machine is ideally suited for metal fabrication, locksmith workshops, as well as applications in the furniture industry and advertising technology. Purchase your KNUTH tube and profile bending machine KPB 81 now and benefit from its robust features in tube and profile processing. Dujdpfxsn Upgls Aflsl

Stanje: rabljeno, Proizvajalec: Cotuplas Model: S4 Tip: Ročni zapiralec za plastične cevi Uporaba - Proizvodnja vzorcev za predstavitev - Tržne raziskave - Proizvodnja cevi za manjše ali srednje serije - Laboratorijsko testiranje, notranja preverjanja kompatibilnosti izdelkov Značilnosti - Enota S4 sprejme cevi s premerom od 13,5 mm do 60 mm in dolžino do 230 mm - Ročna hitrost proizvodnje do 240 cevi na uro - Nastavljiv časovnik od 0 do 30 sekund za ustrezno zapiranje - Cevi postavi operater med zapiralni čeljusti - Naprava za pozicioniranje cevi zagotavlja ponovljivost postopka in kakovost zvarov (manjkajoči deli, predvidena namestitev) - Čeljusti visoke 3,5 mm ohranjajo pritisk med zapiranjem - Čeljusti na vzmetni osnovi se z ročico zlahka odprejo Poraba Dodpfx Ajx R Aw Heflsul - voda: 100 L/h - elektrika: 400 W

Leto izdelave: 1994, Stanje: rabljeno, Tehnične podrobnosti: Debelina pločevine: 1,0 mm Premer cevi: 60 / 80 / 90 / 100 / 110 / 120 / 130 mm Debelina stene: 0,6 / 0,7 / 1,0 mm Dolžina vlečenja cevi: 150 - 1000 mm Krmiljenje programa: SPS Simatic S 5 Potreben zračni tlak: 5 bar Obratovalna napetost: 380 V Krmilna napetost: 24 V Skupna potrebna moč: 3,5 kW Dimenzije D x Š x V: 1,2 x 1,0 x 1,6 m Stroj za vlečenje cevi, trenutno opremljen za Ø 130 mm. Uporaba: npr. za pečarske cevi, cevi se valjajo na želene dimenzije – Vstavljanje in odstranjevanje obdelovancev je ročno – Upravljanje preko upravljalne plošče – Samodejni in nastavljivi način delovanja Dodatne značilnosti: Debeline pločevine: 0,6 / 0,7 / 1,0 mm Dolžina obdelovanca 150 - 1000 mm Dujdpfxeu Icv Aj Aflel Različen pribor/orodja za Ø 120 in Ø 130 mm ter drugo, kot na fotografiji *

Stanje: novo, RA 2 podjetja KNUTH, zmogljiv stroj za obdelavo koncev cevi, je praktičen pomočnik za vsako delavnico, saj poenostavi sestavljanje in varjenje cevi pod kotom 90°. Ta vsestranska naprava omogoča obdelavo različnih premerov cevi, vključno z debelino stene do 5 mm za jeklo ali neželezne kovine. Zaradi ekscentrične gredi je potrebna le minimalna sila, stroj pa je mogoče uporabljati tako v vodoravnem kot navpičnem položaju, kar je idealno za dvojne in kotne spoje. Poleg uporabniškega priročnika prejmete vse potrebne komponente za učinkovito uporabo RA 2. Naročite si to robustno napravo za obdelavo koncev cevi, da boste lahko učinkovito izpolnili zahteve vaših projektov na področju obdelave cevi in profilov. Djdpfx Aowhkf Hefloul

Stanje: rabljeno, Leto izdelave: 1993, Technical Details: Tube diameter: 80 mm Minimum tube diameter: 6 mm Control unit for program: Gelma MM-1 Tube feed length: 1800 mm Approx. machine weight: 0.232 t Machine dimensions (LxWxH): approx. 1.9 x 0.7 x 1.3 m Duedsu Ibyyjpfx Aflol Semi-automatic TUBE BENDING MACHINE Operating modes: manual and semi-automatic operation Application: for multiple, repeatable bending operations of tubes (e.g. hydraulic piping) The swiveling unit with pre-selection for 3 different bending angles, usable in single or automatic mode. Currently, the machine is equipped with a stop rod for a tube size of Ø 10 mm for 6 angle settings. Bending radius depends on the material used. The tube bending machine is mobile/movable. Equipment/Accessories: 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm