Trubend 5085 nakup rabljenega (71)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 61.469 h, proizvajalec krmilnikov: TRUMPF, model krmilnika: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. It is the world’s first automated bending cell featuring integrated image recognition for maximum flexibility. Suitable for sheet metal parts up to 40 kg, this system incorporates a 6-axis backgauge sensor system. Outstanding repeatability is ensured by angle measurement sensors (ACB) in automated operation. The machine features a robust all-steel frame, electro-hydraulic top drive, and modern block hydraulic system. It is equipped with TRUMPF TASC 6000 control, including a 15-inch touchscreen and network capability. The TRUMPF TruBend Cell 5000 press brake is ideal for precise bending tasks. Contact us for further information on this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Robust all-steel machine frame • Press beam with spherical bearings and angle adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Low-profile front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil within machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Backgauge/stop • Backgauge system • Rear backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool displacement, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network capable • Remote diagnostics via modem • Operation • Operator panel with LCD keyboard and foot switch • Communication rail • Safety • Standard safety features • BendGuard safety device for upper tools up to 390 mm Hedox Imqlepfx Ab Eefd • CE marking Additional Equipment • TRUMPF BendMaster automation (standard configuration) • Robot/handling • Sturdy base and manipulator made of die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile, welded floor rail • Sheet sensor for contour detection • Rotary feed-through for easy gripper change • Gripper coupling on BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper handover station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Remote diagnostics via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access door World's first automated bending cell with image recognition for maximum flexibility. Sheet metal up to 40 kg, 6-axis backgauge sensor system. Highest repeat accuracy due to angle sensors (ACB) in automated operation. TruBend 5085 (2720 mm x 850 kN) with BendMaster 60.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 33.318 h, proizvajalec krmilnikov: TRUMPF, model krmilnika: TASC 6000, število osi: 5, skupna masa: 8.300 kg, skupna širina: 1.800 mm, skupna višina: 2.840 mm, stiskalna sila: 87 t, največja dolžina izdelka: 3.020 mm, Ta TRUMPF TruBend 5085 je bila izdelana leta 2012. S premočjo 850 kN in dolžino upogibanja 2.210 mm je primerna za različne vrste upogibanja. Z uporabniškim vmesnikom Touchpoint TruBend omogoča enostavno upravljanje. Izkoristite priložnost za nakup te upogibne preše TRUMPF TruBend 5085. Za dodatne informacije nas kontaktirajte. • Obratovalne ure: stroj 33.318 h; hidravlika 15.786 h • Svetla višina: 1.750 mm • Uporabna vgradna višina: 385 mm (opcijsko povečana na 615 mm) • Globina izreza: 420 mm • Uporabniški vmesnik: Touchpoint TruBend • Največja hitrost Y-osi (delovni korak, opcijsko): 25 mm/s Tehnične specifikacije Hfedpsyhp Edofx Ab Esd Dolžina upogiba: 2.210 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, upogibna sila (maks.): 85 t, vgradna višina: 615 mm, število osi: 6, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, Longueur de pliage [mm] : 2210 Force de pressage [t] : 85 Commande : TRUMPF TASC 6000 Heures de fonctionnement [h] : 90816 Heures hydraulique activée [h] : 57234 Équipement standard : - Châssis robuste en construction tout-acier - Traverse supérieure stabilisée par traitement de détente - Entraînement supérieur à 4 cylindres - Hydraulique en bloc avec pompe double à faible bruit - Butée arrière avec axes X et R commandés CNC - Serrage manuel de l'outil supérieur - Serrage hydraulique de l'outil inférieur - Bombage manuel - Refroidissement de l'armoire électrique par échangeur air-air - Connexion réseau de la commande machine - Dispositifs de sécurité standard Hfjdpfjytfrwox Ab Eed Options/Suppléments : + Hauteur d'installation/ course augmentée de +230 mm + Système de butée arrière 6 axes + Serrage hydraulique de l'outil supérieur + Bombage CNC + BendGuard + 2x consoles de support + Position de parking courte (190 mm) + Éclairage de la zone de travail arrière + Éclairage de la zone de travail avant

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, upogibna sila (maks.): 85 t, vgradna višina: 615 mm, število osi: 6, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, Dĺžka ohýbania [mm]: 2720 Tlaková síla [t]: 85 Řízení: TRUMPF TASC 6000 Provozní hodiny [h]: 45666 Hydraulika zapnuta [h]: 13762 - Koncept horního pohonu ve čtyřválcovém provedení Y1/Y2 - Elektrohydraulický pohon beranu s proporcionální technikou ventilů - Měřicí systém zdvihu beranu s kompenzací pružení přes skleněná pravítka - Moderní bloková hydraulika - Sférické zavěšení a šikmé nastavení lisovacího nosníku - CNC systém zadního dorazu - Bezpečné nastavení dorazových prstů zepředu - 2 ks dorazových prstů - Samostředicí, ruční, kalené uchycení horního nástroje pro vertikální výměnu nástrojů - Kalené, ruční uchycení spodního nástroje - Programově řízený posuv spodního nástroje (osa I) pro 2 pozice - Plochý čelní kryt - Moderní ochranný kryt - CE značka - Chladič oleje Hfsdpfx Asytfqmsb Ejd - Zvýšená montážní výška - 6osý zadní doraz - Hydraulické upínání horního nástroje - Hydraulické upínání spodního nástroje - CNC bombírování - CNC osa I - BendGuard - Příprava na ACB - 2 opěrné konzoly

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to a second machine Hfsdpfswykccsx Ab Eed

Leto izdelave: 2010, stanje: skoraj kot novo (rabljeno), Usata pressa piegatrice CNC Trumpf Trubend Serie 3000 in vendita VIDEO QUI SOTTO: Trumpf Trubend 3120 usata in vendita, 3 metri x 120 tonnellate, piegatrice CNC a 6 assi in vendita. Marca/fabbricante: TRUMPF Modello: TRUBEND 3120 Tipo: Presse piegatrici idrauliche CNC Anno: 2010 Ubicazione: Regno Unito Basse ore di utilizzo – 14.000 Specifiche Tonnellaggio: 119,7 t / 120 ton Tipo: corsa verso il basso idraulica Lunghezza totale: 3,1 m / 3 metri Altezza BH: 2,7 m Corsa: 199,9 mm Numero di assi: 7 assi 5 assi asse battuta posteriore Peso: 8.300 kg (18.298 lbs) Controllo CNC (T3000) Pressa piegatrice Trumpf TruBend 3120 CNC – 132 ton x 3 m Anno: 2010 Specifiche dalla fabbrica: Macchina – Struttura stabile in acciaio saldato – Traverso altamente resistente alla torsione – Sospensione sferica del traverso con inclinazione – Azionamento elettroidraulico con tecnologia a 4 cilindri – Tecnologia valvole proporzionali – Idraulica moderna a blocco – Bilanciamento elettronico della pressione – Sistema di misura con righe ottiche e compensazione della flessione del telaio – Olio idraulico riempito in macchina (lubrificazione a vita) – Raffreddatore olio Sistema battuta posteriore – Sistema a 2 assi con trasmissione a cremagliera per assi X e R – 2 dita di battuta anteriore regolabili in sicurezza Portautensili – Bloccaggio superiore TRUMPF, manuale e temprato – Bloccaggio inferiore manuale e temprato Bombatura – Sistema di bombatura autoregolante – CNC-bombatura idraulica aggiuntiva Controllo – Controllo macchina: T3000 a colori, DELEM su base Windows Real Time – Interfacce USB per tastiera, mouse, ecc. Hfjdpfx Ajhtm Ikeb Eod Sicurezza – Pedale per salita, discesa e arresto di emergenza – Sicurezze: porte laterali e serranda manuale posteriore Servizi – Installazione, avviamento e formazione Opzioni sistema battuta posteriore – Sistema a 5 assi Opzioni portautensili – Bloccaggio rapido stile Amada US (segmentato su tutta la lunghezza di lavoro) Opzioni dispositivi di sicurezza – BendGuard Opzioni movimentazione lamiera – Bracci di supporto (2 pz) Consegna: giugno 2011 Video sotto: Disponibili a magazzino anche presse piegatrici CNC Trumpf serie V e C usate. Siamo sempre interessati all’acquisto di presse piegatrici e altre macchine Trumpf usate come: TruBend 3066, TruBend 3100, TruBend 3170 TruBend Serie 5000 TruBend 5085, TruBend 5130 TruBend Serie 7000 TruBend 7036, TruBend 7050 TruBend Serie 8000 TruBend 8230, TruBend 8400

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, številka stroja/vozila: B0508A0463, TRUMPF TruBend Cell 5000 – Komórka gięcia zrobotyzowanego | Rok produkcji: 2015 Prasa krawędziowa TruBend 5230 Zrobotyzowany system gięcia BendMaster Sterowanie: TASC 6000 (programowanie robota i prasy przez interfejs maszyny) Parametry prasy krawędziowej: Siła nacisku: 230 ton Długość gięcia: 4250 mm Rok produkcji: 02.2015 Numer seryjny: B0508A0463 Czasy pracy: Czas załączenia maszyny: 33 789,3 h Układ hydrauliczny: 8 528,8 h Czas pracy belki naciskowej: 1 119,9 h Hfjdpfsw Eilyex Ab Eed Opis: W pełni zautomatyzowane rozwiązanie do gięcia – TruBend Cell 5000 została zaprojektowana z myślą o produkcji seryjnej wymagającej wysokiej precyzji. Zintegrowany robot umożliwia wydajne gięcie przy minimalnym udziale operatora. Stan: bardzo dobry, regularnie serwisowany Demontaż, załadunek i transport mogą zostać zorganizowane

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 94.201 h, vrsta upravljanja: CNC krmiljenje, upogibna sila (maks.): 400 t, vgradna višina: 595 mm, Bending length [mm]: 3550 Pressing force [t]: 400 Control system: Cybelec ModEva 10s Operating hours [h]: 94201 Standard equipment: - Robust machine frame in all-steel welded construction - Press beam with high flexural strength - Electro-hydraulic top drive via proportional valves - Modern block hydraulics - CNC backgauge for X and R axes, with safe forward finger movement thanks to safety interlock - Upper tool holding system "EHT", manual, head width 26 mm, max. load 3000 kN/m - Lower tool holder EHT, manual, receiving width 90 mm for block and 13 mm for single V-dies, without clamping - Control: CYBELEC ModEva 10S running on Windows, 2D graphic control with 10.4” colour display - Electrical cabinet air conditioning + Backgauge - System 1, 5 axes, straight fingers, 140 mm wide, R-axis adjustment 150 mm Hjdpfx Absytfnls Eefd + EHT quick-clamping device, for upper tools, pneumatic, head width 26 mm, max. load 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, receiving width 55 mm + Hardened support strip, for EHT lower tool clamping 55 mm / 90 mm + Lower tool displacement, CNC controlled, infinitely positioned via Backgauge 1 (max. working length 4550 mm) + CNC-controlled crowning device integrated in the bed without tool holder, max. load 3000 kN/m + Lazersafe safety device (up to max. upper tool height 440 mm) + Additional foot switch + Bending aid 1st arm, max. load 1500 N with 2 integrated support rails, standard version + Bending aid 2nd arm, max. load 1500 N with 2 integrated support rails, standard version + 2 support rails for one bending aid with 14 mm T-slot, scale, and ball rollers + 2 table extensions for bending aid + Short parking position left + Short parking position right

Stanje: rabljeno, Leto izdelave: 2011, Press force approx.: 360 kN Bending length approx.: 1,020 mm Clear column passage approx.: 932 mm Usable installation height approx.: 295 mm Throat depth: 150 mm Hedpfxjyrf Dkj Ab Esfd Working speed: 25 mm/s Approach speed: 220 mm/s Control: TASC 6000 Machine operating hours: 41,422 h Press beam runtime: 4,713 h Length: 1,805 mm Width: 1,330 mm Height: 2,380 mm Machine weight approx.: 2,600 kg Standard Equipment Machine - Sturdy machine frame - Optimized press beam - High-dynamic electromechanical direct drive (torque motor) - Inductive linear measuring system with temperature compensation - Control cabinet climate control - Ergonomic machine design Backgauge System - Rear stop system - Stop fingers Control - TRUMPF TASC 6000 integrated - Numeric workshop programming - Windows XPe, Pentium M with 1.1 GHz clock speed - 1 GB RAM memory - 15-inch touch screen - Network capable - Teleservice Safety - Sideward swiveling safety doors - Rear safety hood - 2-button foot pedal for both standing and seated operation Ergonomics - Comfort support table (front) - Comfort footrest - Front workspace lighting (LED) - Swivel-mounted control unit - 1 storage console and 2 document trays Productivity Package - Safety device BendGuard (with block laser) - Graphical workshop programming - Automatic tool clamps Additional Equipment Extended backgauge system - 6-axis rear stop system Automation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 48.274 h, število osi: 6, stiskalna sila: 326 t, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electrohydraulic upper drive, and 2D graphic control DA 69 on a 10.4" colour display. The machine is equipped with a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending operations. Regularly serviced as part of a TRUMPF maintenance contract. Contact us for further details on this machine. • Free column gap: 3680 mm • Installation height: 535 mm • Control: 2D graphic control DA 69 on window with 10.4” colour screen • Electrical equipment: for 400 V / 50 Hz three-phase current • The machine has undergone annual maintenance • Maintenance contract in place • Rigid machine frame, welded all-steel construction • Press beam with high bending resistance • High-dynamic direct electromechanical drive (torque motor) • Electrohydraulic upper drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3 axes (X1, R1, Z1) and 6-axis options • Rack-and-pinion drive for X and R axes • Safe, front-accessible movement of backgauge fingers • Upper tool holder system Modufix, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Integrated operating system Windows XPe, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network capable, teleservice via modem • Control cabinet air conditioning • Side-mounted safety doors and rear safety cover • 2-button foot switch for standing or seated operation • LED lighting in rear work area • LED lighting in front work area • Ergonomics package: comfortable front work surface and footrest • 2 storage consoles and 2 document compartments • 24,000 operating hours, brakes renewed in 2024 • TRUMPF tools maintained, all within tolerance Hfsdpfxox D D Hyo Ab Ejd Additional equipment • Backgauge system with 5 axes and control cabinet cooling • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC crowning • BendGuard safety device • Foot switch • 2x front support consoles • 1x bending aid with 900 mm park position • Table extension for base table / auxiliary table Technical Specification Bending length: 1020 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, This TRUMPF TruBend V5050 press brake was manufactured in 2007. It features a pressing force of 500 kN and a bending length of 1275 mm. Equipped with a rigid machine frame, electrohydraulic top drive, and a 2-axis backgauge system, it ensures precision and efficiency. Ideal for high-quality bending tasks. Contact us for more information about this machine. Additional Equipment Hfedpsx D Hb Hefx Ab Esd • Robust machine frame as a fully-welded steel construction / Ram with high bending strength / Spherical bearing mounting of the ram with adjustable ram tilt / Electrohydraulic top drive with 2-cylinder technology / Proportional valve technology and switchable dual pump / Modern block hydraulics with control valves mounted on the cylinders / Electronic pressure gauge / Measurement system with centrally mounted glass scales and temperature compensation / Upper tool clamping system "New Standard Clamping," manual, hardened, self-centering, for vertical tool change / Lower tool holder with hydraulic clamping, hardened / Programmable lower tool displacement (pneumatic, 2 positions) / 2-axis backgauge system with rack-and-pinion drive for X and R axis, 2 gauge fingers with secure front adjustment / Machine control: TRUMPF TASC 6000 / Control panel with LCD keyboard, foot switch with Emergency Up, Emergency Down and Emergency Stop functions / Safety equipment: integrated side doors / Control cabinet cooling (air-to-air heat exchanger) / Oil cooler / Network capable / Modern machine design / Installation, commissioning, and training / Hydraulic upper tool clamping / BendGuard / TruBend documentation Machine Advantages Technical Advantages • Pressing force: 500 kN • Bending length: 1275 mm / clear distance between columns: 1040 mm / installation height: 385 mm • The machine has been serviced annually by TRUMPF. • TRUMPF maintenance contract.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Ta TRUMPF TRUBEND CELL 7000 je bila izdelana leta 2014. Gre za avtomatiziran visokohitrostni upogibni sistem, idealen za majhne in srednje velike pločevinaste dele. Oprema vključuje upogibni stroj, robotsko rokovanje in integrirani podajalni sistem. Stroj je v odličnem stanju, priložen je velik komplet upogibnih orodij in je pripravljen na uporabo. Če iščete visokokakovosten upogibni stroj, razmislite o TRUMPF TRUBEND CELL 7000, ki jo imamo naprodaj. Za več informacij nas kontaktirajte. • Pritisna sila: 360 kN • Dolžina upogiba: 1020 mm Hfedpfox D Hypsx Ab Eod • Globina odprtine: 300 mm • Velik komplet upogibnih orodij • ToolMaster Bend s sistemom za identifikacijo orodij (TIS) • Dodatna nakladalna paleta • Povsem zaprta streha celice • LoadMaster prijemalo s ploščatimi priseski in 4 elektromagneti • Kombinirani transporter (paletni + trakasti sistem) • 1 dodatno kleščasto prijemalo z 2 pari čeljusti

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, Obratovalne ure: ca. 9000 ur. Redno vzdrževanje s strani podjetja Trumpf. Podrobne informacije na zahtevo. Hjdpfxeypcdij Ab Ejfd

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, vrsta upravljanja: CNC krmiljenje, upogibna sila (maks.): 66 t, delovna širina: 2.040 mm, hod: 200 mm, razdalja med stojali: 2.364 mm, Delem CNC kontrola Hfodpfxex Tgmko Ab Ejd krmiljeni zadnji naslon 1 komplet zgornjih in spodnjih orodij v dolžini 2 m Tehnični podatki: Tlak: 66 t Dolžina upogibanja: 2040 mm Razdalja med stebri: 2364 mm Hod (os Y): 200 mm Hod osi X: 600 mm Hod osi R: 150 mm Teža: 5700 kg Tehnični podatki, dodatna oprema in opis stroja niso zavezujoči.

Leto izdelave: 2013, obratovalne ure: 14.572 h, stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 13.200 kg Višina stroja: 2.330 mm Hodpfx Abjx D E N Ao Eefd Krmilna enota Znamka: DELEM Model: T3000 Glavni pogon Število osi: 6 Dolžina upogibanja: 4.140 mm Pritiskalna sila: 1.800 kN Dimenzije Dolžina stroja: 4.610 mm Premiki Pomik X-osi: 600 mm Pomik Y-osi: 20 mm Ta 6-osni hidravlični stiskalni stroj TRUMPF TRUBEND 3180 je bil izdelan leta 2013. Ponaša se z upogibno zmogljivostjo 1.800 kN in dolžino upogiba 4.140 mm. Stroj vključuje CNC krmilje Delem T3000, hitro-vpenjalni sistem in 4-osni CNC zadnji prislon (X, R, Z1, Z2). Deluje na 400 V s porabo 18,5 kW. Izkoristite priložnost in kupite ta hidravlični stiskalni stroj TRUMPF TRUBEND 3180. Za več informacij o stroju nas kontaktirajte. Uporabna področja Upogibanje

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 5650 kg Višina stroja: 2370 mm Globina stroja: 1644 mm Dimenzije Dolžina stroja: 2587 mm Premiki Premik po osi X: 600 mm Premik po osi Y: 200 mm Ta 6-osna stiskalnica TRUMPF TruBend 3066 B26 je bila izdelana leta 2018. Ima stiskalno silo 660 kN, dolžino upogiba 2600 mm in hod 200 mm. Stroj vključuje štiriosni zadnji prislon (X/R/Z1/Z2) in deluje s hitro hitrostjo približevanja 200 mm/s. Če želite visokokakovostne zmogljivosti upogibanja, razmislite o TRUMPF TruBend 3066 B26, ki ga imamo naprodaj. Kontaktirajte nas za več informacij. Hedpfx Aex Enkzeb Eofd Vrste uporabe Upogibanje

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, Servo-electric Press Brake Make: TRUMPF Model: TruBend 7036 Year of manufacture: 2008 Technical Data Manufacturer: TRUMPF Model: TruBend 7036 Year: 2008 Press force: 36 t Bending length: 1020 mm Working height approx.:1150 mm Dimensions (LxWxH): 1805 x 1330 x 2380 mm Weight: 2,600 kg Standard Equipment - Rigid machine frame - Press beam - High-dynamic, electronic direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Special Equipment - Top and bottom tool clamping system (Wila) - Integrated TRUMPF TASC 6000 control - Front safety light barrier Hfjdpfx Abjyr Ncks Eed - 6-axis backgauge system: X1, X2, R1, R2, Z1, Z2 - Comfort support table - BendGuard (with Block Laser) Safety - Side-swiveling safety doors - Rear safety cover - 2-button foot switch, for standing and seated operation - CE marking Tooling - Bottom tool EV/S-W10, V10/84°/R1, H 100 mm, L = 1000 mm, sectionalized - Top tool OW200/K, offset 86°/R1, H 100 mm, L = 1000 mm, sectionalized All details without obligation. Demonstration under power possible at any time in our showroom.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 17.000 h, vrsta upravljanja: CNC krmiljenje, upogibna sila (maks.): 120 t, delovna širina: 3.060 mm, skupna masa: 8.300 kg, Oprema: CE označba, dokumentacija / priročnik, nožno daljinsko upravljanje, nujno zaustavitev, Trdna preprosta upogibna stiskalnica z malo delovnimi urami v dobrem stanju. Možen prikaz pod napetostjo. Orodja niso vključena! Hfsdpex Nax Esfx Ab Eod Brezplačen naklad na tovornjak.

Leto izdelave: 2023, stanje: rabljeno, številka stroja/vozila: B1703I0727, Tlačna sila: 500 kN, hod: maks. 215 mm, čas izteka: maks. 117 ms, iztek poti: maks. 15 mm, teža stroja: 5.500 kg Hjdpfx Ajyn Nh Seb Eefd

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 55 kW (74,78 KM), vrsta goriva: dizel, Leto izdelave: 2022, obratovalne ure: 222 h, številka stroja/vozila: WNK35322LNSKF2214, Oprema: 4-v-1 lopata, kabina, pogon na vsa štiri kolesa, vilice za palete, Prodaja v obstoječem stanju Vmesna prodaja in napake so izrecno pridržane! Prodaja poteka izključno po naših splošnih pogojih poslovanja. Hfsdpfjyma Awjx Ab Ejd Pomembno obvestilo – Pomembna informacija: Kljub skrbnemu preverjanju vseh podrobnosti v naši ponudbi lahko pride do napak. Do njih lahko deloma pride zaradi prenosnih napak v sistemih različnih ponudnikov platform. Zato poudarjamo, da so vsi podatki brez jamstva in ne predstavljajo pravne podlage. Pravno opozorilo: Ta prodajni oglas ni ponudba v smislu 145. člena BGB. Gre zgolj za informacijo za namen sklenitve pogodbe. Podani podatki so brez garancije in ne predstavljajo zagotovljenih lastnosti.

Stanje: rabljeno, Leto izdelave: 2017, TRUMPF - TRUBEND CELL 7000 - 2017 Hfjdpfx Asyl Strob Eod - sistem Siemens - vključuje upogibni stroj TRUMPF TRUBEND 7036 - sila stiskanja 217 kN - dolžina upogibanja 2x500 mm - čista odprtina med stojali 1530 mm - uporabna vgradna višina 300 mm - izzid 515 mm - BendMaster - maks. velikost obdelovanca 500 mm x 380 mm - maks. teža obdelovanca 1,5 kg - maks. nosilnost 15 kg - min. debelina pločevine 0,5 mm - maks. debelina pločevine 6 mm - pod napajanjem več kot 34000 ur - delovnih ur več kot 18500 - vključen robot

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, obratovalne ure: 14.367 h, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, model krmilnika: TASC 6000, upogibna sila (maks.): 320 t, delovna širina: 4.420 mm, hod: 445 mm, globina grla: 420 mm, razdalja med stojali: 3.680 mm, vgradna višina: 615 mm, število osi: 6, tip kronanja: CNC krmiljen, potovalna razdalja osi X: 860 mm, nastavitev zadnjega prislona: CNC krmiljen, Oprema: CE označba, dokumentacija / priročnik, nožno daljinsko upravljanje, sistem za merjenje kota, varnostna svetlobna zapora, TruBend Cell 5000 – Robotic Bending Cell 320t Uninterrupted Service History - 6-axis backgauge system with control cabinet air conditioning - Sensors for 6-axis backgauge - Hydraulic upper tool clamping - CNC crowning system - Prepared for AСВ - MobileControl - Rear work area lighting - Front work area lighting - Comfort control: screen, mouse, keyboard - BendGuard - BendMaster 150 - Track extension 16,000 mm - NC grip-change station - Double sheet detection - Right side door for safety fence - Vacuum gripper - 3x pneumatic gripper couplings - Heavy-duty all-steel machine frame - Pressure beam stress-relief annealed - 4-cylinder upper drive - Block hydraulic system with low-noise dual pump - Backgauge with CNC-controlled X and R axes Hfsdpfxoylanks Ab Eod - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control Control system - TRUMPF TASC 6000 Safety - Standard safety equipment

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 7.238 h, Technical Data Press Force: 360 kN Bending Length: 1020 mm Usable Installation Height: 295 mm Clear Distance between Columns: 932 mm Throat Depth: 150 mm Working Height¹: 1150 mm Backgauge Travel Values Y-axis Stroke: 120 mm X-axis Travel: 235 mm (max. in backgauge zone) X-direction: 500 mm R-axis Travel: 75 mm Control Basic Configuration: Windows XPe, PC-based control, Pentium M 1.1 GHz, 15" Electrical Connection Value: approx. 6 kVA Dimensions and Weights Installation Space (L × W): 1805 × 1330 mm Height: 2380 mm Weight: 2600 kg Hjdpfx Ajyfxfnjb Eofd Standard Equipment of TruBend 7036 Machine Rigid Machine Frame: Welded construction, heat-treated to relieve stress for both standing and seated operation, comprises two side columns, table, and connecting bar. Press Beam: Stress-relieved by heat treatment, optimized for deformation. Drive: Highly dynamic, electromechanical direct drive (Torque motor), max. working speed of 25 mm/s (depending on selected die width and operating cycle). Inductive Length Measuring System with temperature compensation Electrical Cabinet Air-conditioning Ergonomic machine design Backgauge System 3-Axis Backgauge (single backgauge finger): Highly dynamic and safe 3-axis rear gauge system. Rack-and-pinion drive, CNC-controlled and freely programmable X, R, and Z axes, provide adjustable gauging depth and height for high precision. Backgauge finger made of fiberglass with hardened metal stop. Tool Clamping Upper Tool Clamping: Enables quick and precise tool changes both vertically and horizontally; fixed and self-centering. Lower Tool Clamping: Individual V-dies mount on a special plate; clamping: manual, with hardened clamping and securing rails. Safety Safety Equipment: Emergency stop button, 2-button foot pedal for both standing and seated operation, side-sliding safety doors, rear and side safety covers. Side covers made from transparent, impact-resistant plastic. Control TRUMPF TASC 6000: TRUMPF TASC6000 control based on Windows XPe OS, with 1.1 GHz Pentium M and 15" touchscreen, USB interface, 1 GB RAM. Expansion Levels Backgauge System 6-Axis Backgauge System (2 backgauge fingers) Tool Clamping Tool clamping for AMADA US-Style upper tools (manual) Safety BendGuard (with Block Laser): Optoelectronic safety device enabling fast and safe bending. Maximum allowed speed of press beam in foot mode: 220 mm/s Control Graphical programming at the workstation

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 3.454 h, • Press force: 1000 kN • Bending length: 3060 mm • Usable installation height with manual or hydraulic tool clamping (Option: Increased installation height): 350 mm (500 mm) • Usable installation height with TRUMPF Quick Clamp (Option: Increased installation height): 430 mm (580 mm) • Max. distance between the lower edge of the press beam and the upper edge of the machine table (Option: Increased installation height): 470 mm (620 mm) • Tilt adjustment of pressing beam: ± 6.5 mm • Free distance between uprights: 3384 mm • Table width: 100 mm • Working height¹: 1049–1069 mm Speeds • Y rapid traverse²: 200 mm/s • max. Y working stroke³: max. 15 mm/s • Y-axis return: 200 mm/s • X-axis: 500 mm/s • R-axis: 200 mm/s • Z-axis: 1000 mm/s Positioning accuracy • Y-axis: 0.01 mm • X-axis: 0.05 mm • R-axis: 0.1 mm Stroke and backgauge zones • Y-axis stroke (Option: "Increased installation height"): 200 mm (350 mm) • X-axis travel: 600 mm • max. backgauge zone in X-direction: 860 mm • R-axis travel: 150 mm Control • Standard: T3500T Multi-Touch Control Electrical values • Connected load (IEC): approx. 20 kVA Dimensions and weights • Footprint (length x width): 3607 x 1644 mm • Height (Option: Increased installation height): 2370 mm (2700 mm) • Weight (Option: "Increased installation height"): 7700 kg (8300 kg) Paint / Color scheme • Basic structure: White = NCS S 0505 R80B • Blue = approx. RAL-Design 250 20 20 • Black = RAL 9005; Silver parts with RAL 9006 Equipment Extended machine equipment BendGuard: – Optoelectronic safety device enabling fast and safe bending. – The maximum Y rapid traverse speed is not limited in pure foot mode. – Tool height can be set simply and quickly with rack solution and weight compensation. – BendGuard can be easily retracted for side tool changes without refitting. – BendGuard is insensitive to shocks (dismounting), as the housing electronics are not connected. Table consoles (2 pieces): – Table consoles adjustable manually in Z and R directions, with quick clamping. – Facilitate handling of large and heavy workpieces and can be used as a storage surface for finished parts. – Load capacity: 70 kg per console. LED work area lighting front and back: – Excellent illumination of the interior and working area in front of the machine. Hsdpfjyfxdwex Ab Eofd – Modern LED technology: energy-saving, does not heat up, and extremely long service life. DXF import: – DXF drawings can be loaded into the 2D control.

Stanje: pripravljen za uporabo (rabljen), Na voljo je pokvarjen upogibni stroj Trumpf. Tlačna sila: 2000kN, dolžina upogibanja: 4080mm, hod pritiskalca: 365mm, razdalja med mizo in pritiskalcem: 632mm, maksimalna odprtina: 535mm, nagib: +/-10mm, odprtina grla: 410mm, razdalja med stojali: 3680mm, širina mize: 200mm, delovna višina: 1050mm. Dimenzije stroja X/Y/Z: pribl. 4650mm/2250mm/2900mm, teža: pribl. 18000kg. Krmilna plošča je okvarjena. Stroj ima nepoškodovane pripomočke za upogibanje na obeh straneh. Dokumentacija je na voljo. Ogled na lokaciji je možen. Hfjdox I Rq Aopfx Ab Eod