Trna Bend nakup rabljenega (3.629)

Stanje: novo, Leto izdelave: 2025, Electric mandrel-free tube bending machine. A precise and efficient machine for bending steel, copper, aluminum, and brass pipes. The ability to select the optimal bending radius ensures high-quality results without material deformation. The presented tube bender is very easy to operate. Tube bending machines are used for single-piece and small-series production of components in the automotive, furniture, and architectural industries, as well as in the manufacturing of gardening tools. The main bending die is driven via a reduction gearbox and an electric motor. The device can operate in two modes: manual and semi-automatic. A simple and robust construction ensures long-term, trouble-free operation. Standard equipment: - Digital angle readout - The BENDMASTER 40A includes dies for pipes with diameters: 17.2, 21.3, 26.9, 33.7, 38.1 mm Standard equipment: - Digital angle readout - The BENDMASTER 40A comes with dies for pipes with diameters: 16, 20, 25, 32, 38 mm Technical data: MAXIMUM BENDING ANGLE 180° DIE ROTATION SPEED DURING BENDING 5 rpm MAIN MOTOR POWER Kdodevugx Dspfx Agkew 1.5 kW EXTERNAL DIMENSIONS OF THE DEVICE 720 x 500 x 1030 mm WEIGHT 330 kg

Stanje: novo, Leto izdelave: 2025, Precise and efficient industrial pipe bender for bending steel, copper, aluminum, and brass pipes. The ability to select the optimal bending radius ensures high-quality results without material deformation. The presented pipe bending machine is very easy to operate. Pipe benders are devices used for individual and small batch production of components in the automotive, furniture, architectural industries, and for the manufacturing of gardening tools. The main bending die is driven by a reduction gearbox and an electric motor. The machine can operate in two modes: manual and semi-automatic. The simple and robust construction guarantees long-lasting, trouble-free operation and ensures straightforward handling. Standard equipment: - Digital angle readout Ksdpfx Aovugv Ajgkodw - The BENDMASTER machine comes equipped with dies for pipes with the following diameters: 38.1; 48.3; 70 mm Technical data: MAXIMUM BENT PIPE DIAMETER: 70x5 mm MAXIMUM BENT SQUARE PROFILE SIZE: 50x50x2 mm MAXIMUM BENDING ANGLE: 270° DIE ROTATIONAL SPEED DURING BENDING: 1.2 rpm DIE ROTATIONAL SPEED DURING RETURN: 2.4 rpm MAIN MOTOR POWER: 5 kW EXTERNAL DIMENSIONS: 1300x700x900 mm WEIGHT: 680 kg For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Smer upogibanja: v smeri urinega kazalca, premer jeklene cevi: 50 mm, debelina jeklene cevi: 3 mm, premer inox cevi: 50 mm, debelina inox cevi: 2 mm, maksimalni uporovni moment: 5 cm³, kot upogiba: 180°+10°, maksimalna dolžina cevi: 2000 mm, maksimalni radij: 150 mm, višina upogiba: 1050 mm, dolžina glave za upogibanje: 850 mm, minimalna razdalja med loki: 400 mm, nazivni tlak: 250 bar, obratovalni tlak: 200 bar. Dimenzije stroja X/Y/Z: približno 3200 mm/1400 mm/1300 mm, teža: približno 1500 kg. Dokumentacija na voljo. Ogled na lokaciji je možen. Kdjdpsxwyw Iofx Agksw

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Tube Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5 x D → Maximum bending performance for tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending performance for tube 30 x 30 x 3 mm → Maximum bending performance for tube 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Tube feed length approx. 1.5 m Kodetr U Hlepfx Agksdw Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control’s touch display enables easy, intuitive programming and operation of the system. After loading the tube, it is clamped in the travelling carriage’s chuck. This ensures precise positioning of the tube and thus enables the creation of dimensionally accurate geometries. Standard equipment also includes a check of the tube geometry before the bending process: if the bending process is started in the wrong position, the machine will not issue a release. This prevents operator errors. Optional additional features provide greater convenience and increase output, thereby improving the system’s efficiency. Data exchange from the optional TBS-3D tube calculation program (PC version) is done via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for the bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive for feed → Servo drive for rotation → Three-jaw chuck for tube clamping in the travelling carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN or USB → Material database Unique graphical programming: simple geometries can be calculated directly at the machine. The control calculates the feed values and the bending angles directly after the length and angle are entered. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: novo, Leto izdelave: 2023, Mandrel Bending Machine ZB 55 H - Mandrel length: 2000 mm - Automatic feed - Robust construction for continuous operation Standard features: Kdjdpfx Aod H Rhijgksw - Electromechanical drive for bending axis - PLC control with color touchscreen 10.1" QVGA color display 64 MB DRAM, compact flash slot ETH 10/100, X2X Link, 2x USB Graphical programming; geometries can be calculated directly at the machine Data transfer via USB stick or network possible Program memory for positions (angle, length, rotation) Material database for 99 tube types - Foot switch operation - Bending angle resolution: 0.1 degrees - Electronic length and rotation measurement - Manual stop system - Feed – overtravel stops - Rotation – 15° indexing - Hydraulic tube clamping with adjustable clamping pressure - Programmable mandrel retraction - Three-jaw chuck for securing the tube in the carriage - Foot pedal - Quick-change tooling system - Mobile design - Tube capacity: 54 x 3.0 mm - Bending direction: left - Bending radius up to 150 mm - Drive power: 5.2 kW - Max. bending angle: 190° - Bending speed: 28°/sec - Voltage: 400 V, 50 Hz, 3-phase - Weight: approx. 900 kg

Stanje: novo, Metallkraft RB 54 Mandrel-Free Tube Bending Machine Kjdpfxefdr Saj Agkjdw NC-controlled, with large program memory. NC control for setting the bending angle High-quality, robust construction Up to 50 programs storable Quick tool change Fully motorized drive Automatically returns to home position TECHNICAL DATA: Maximum bending radius: 125 mm Maximum bending angle: 210° Bending speed(s): 2 rpm Torque: 2,341 Nm Length (product): approx. 600 mm Width/Depth (product): approx. 220 mm Height (product): approx. 470 mm Weight (net): approx. 107 kg Bending capacity for tube material 420 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity for tube material 350 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity for tube material 650 N/mm² (Ø x wall thickness): 42 x 3 mm Drive motor power: 1.1 kW Connection voltage: 400 V Mains frequency: 50 Hz Note: Optional machine base available

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases • Large pipe and profile bends • General metal construction TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm Kodpfxjng A R Ss Agkedw • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance

Stanje: rabljeno, Ring rolling machine, section bending machine, bending machine, pipe bending tool, pipe bender, tube bending machine, mandrel bending machine Kodpfx Aoh S Ti Eegkodw - Mandrel bending machine: mechanical profile bending machine - Accessories: see photos - Overall dimensions: 1200/740/H1220 mm - Weight: 169 kg

Stanje: pripravljen za uporabo (rabljen), Na voljo je cevni krivilni stroj Sommer. Območje premera cevi: 15mm-65mm, dolžina pomika cevi: 3000mm, največji radius krivljenja: 150mm, vpenjalo: 200mm, vpenjanje cevi: hidravlično. Dokumentacija je na voljo. Ogled na lokaciji je možen. Kjdpfx Agexl Up Uskedw

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: Kodsng Amkjpfx Agkjdw • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, usable length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions (L/W/H): approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. Inspection on site is possible. Kdsdpowg E Dhofx Agkew

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg Kdedpfjnfvx Nex Agkew • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available Kedpenh R Ekofx Agksdw • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE COST-EFFECTIVE MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system offers solutions for complex geometries with standard radii of 2xD for tube dimensions from 20 - 90 mm. Depending on the material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there are also ample possibilities for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the stable and robust construction of the mandrel carrier and bending arm, contribute to the desired bending results. Quick-change bending tools allow rapid conversion to different tube dimensions. The clamping pressure for tube securing is optimally adjustable. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited programs for bend angles, lengths, and rotation angles for up to 50 bend sequences per tube. For monitoring spring-back values, a freely programmable database is available for up to 200 materials. The control offers two operation modes: In "Simple Bending", tube segment lengths and rotation are automatically displayed in relation to each other. In "Controlled Bending" mode, data is entered beforehand and a continuous target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gearbox-assisted positioning for length and rotation. POTENTIAL APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metalworking • Prototype construction • Piping installation TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm / 250 mm • Minimum bending radii: 1.5 x Ø (Standard: 2 x Ø) • Multifunction machine control for angle adjustment (0.1°) • Mandrel bar lengths: 3000 / 4500 / 6000 mm • Maximum 180º bending result • Weight: 1600-3200 kg (depending on version) • Ergonomic operation via safety foot pedal OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops using foot pedal • Semi-automatic length and rotation positioning using servomotors • Automatic tool retraction Kjdpsnh R Sujfx Agkedw • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to perform test production at our in-house demo room • Consultation and information meetings at your site • Leasing/financing advice and processing via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: Ksdpjnfvy Ujfx Agkjdw • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: dober (rabljeno), Leto izdelave: 2022, Adjustable stroke with digital position display Variable pressure setting Quick-change tooling system Table length: 1250 mm Table width: 660 mm Max. working pressure: 30 tons Max. stroke: 235 mm Max. workpiece height: 250 mm Stroke adjustable: 0–235 mm Working speed: 10,000 mm/min Return speed: 20,000 mm/min Kdedpfx Aewrzmvegksw Motor power: 3 kW Flat bar capacity: 200 x 24 mm Tube capacity: 60 x 4 mm Ø Solid bar capacity: 40 x 40 mm Length: 1250 mm Width: 700 mm Height: 1200 mm Weight: 1,050 kg

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), - RABLJENA - 4-OSNA SINHRONIZIRANA CNC UPUGALNA PREŠA OSI: Y1 - Y2 - X - R Kodexn U Rqepfx Agksdw DOLŽINA UPUGANJA: 2100 mm TONAŽA: 60 ton GLOBINA VRATA: 410 mm RAZDALJA MED STEBROMA: 1700 mm HOD ZGORNJEGA NOSILCA: 275 mm KRMILNA ENOTA: DELEM DA58 TEŽA: 4560 kg SKUPNE DIMENZIJE: 3250 x 1960 x 2750 mm

Stanje: rabljeno, Leto izdelave: 2017, Transnorm Belt Curve Conveyor 45° Left 670-500 IR1100 RA1083 The Transnorm belt curve is from the year 2017. It is in excellent, like-new condition (used) and is fully operational. It is equipped with a SEW brand motor. Supports are not included in the scope of delivery, but are available as an option. Belt curve conveyors are widely used in intralogistics for in-plant transport of unit loads and are an essential component in modern distribution centers. Transnorm belt curves are renowned for their performance and reliability. Thanks to a low-tension drive across the entire belt width, they are suitable for long operating times. Tapered drums and a specially developed belt guiding system ensure maximum running smoothness. Technical Data: Manufacturer: Transnorm Type: TS 1600-105 FH2 Belt Curve 45° Left Year of manufacture: 2017 Condition: excellent (used) Motor: fully functional Angle: 45° Belt direction: left Inner radius (IR): 1100 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 500 mm Side guide: external sheet steel Drive: SEW gear motor Drive position: external, pulling Weight: 120 kg Scope of delivery: without supports (available on request) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Kedpjk Aa Dtjfx Agkjdw For individual and professional advice, simply contact us. Feel free to call us or send us an email. We will be happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), - RABLJENA - 4-OSNA SINHRONIZIRANA CNC CNC UPOROČNA STISKALNICA OSI: Y1 - Y2 - X - R Kdjdpfx Agjxn U Rkokjw DOLŽINA UPORABE: 3100 mm TONAŽA: 175 ton GLOBINA VRATU: 410 mm RAZDALJA MED STOJALI: 2600 mm POT GORNJEGA NOSILCA: 275 mm KRMILNA ENOTA: ERMAK ER70 TEŽA: 9380 kg SKUPNE DIMENZIJE: 4250 x 2150 x 2800 mm

Stanje: rabljeno, Leto izdelave: 2008, Transnorm Belt Curve Conveyor Belt Curve 90°-800-700 IR900 Right-hand RA2080 Kdodpfx Asn Tpvgegkow Technical Data: Manufacturer: Transnorm Condition: Good (used) Conveying angle: 90° Nominal/External width (NB): 800 mm Belt width (GB): 700 mm Inner radius (IR): 900 mm Height (BH): 210 mm Motor height (MH): 450 mm Motor type: SEW geared motor, SA37/T DT71D4/TH Electrical data: 380-500 V, 0.37 kW Conveying speed: 1st gear 0.67 m/s, 2nd gear 0.25 m/s, 1st gear 0.33 m/s, or 1st gear 0.83 m/s Scope of delivery: without supports (available on request) Optional: Supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional consultation please feel free to contact us. Contact us by phone or email. We would be pleased to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2015, Transnorm Belt Curve Conveyor 90°-800-700 IR900 LH RA2116 Technical Data: Manufacturer: Transnorm Condition: good (used) Conveying angle: 90° Nominal/outer width (NB): 800 mm Belt width (GB): 700 mm Inner radius (IR): 900 mm Conveyor height (BH): 210 mm Motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical data: 380-500 V, 0.37 kW Conveying speed: 0.67 m/s Scope of delivery: without supports (please enquire if required) Optional: - Supports - Side guides - Frequency converter for stepless speed regulation Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For customized, professional consultation, feel free to contact us. Contact us by phone or email. Kedpjq Uap Rofx Agksdw We are happy to assist you in the planning and realization of your projects. We look forward to hearing from you. Kind regards Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: novo, Leto izdelave: 2021, Transnorm Belt Curve Conveyor, right-hand, 30°-1270-1100-IR900 - NEW RA2302 Technical Specifications: Frame width (NB): 1270 mm Frame width with bearing cover: 1390 mm Frame width with bearing cover and gearbox guard: 1480 mm Belt width (GuB): 1100 mm Overall height (BH): 250 mm Height with underslung motor: 300 mm Motor height (MH): 550 mm Inside radius (IR): 1200 mm Conveying angle: 30° degrees Average conveying speed (v m/s): 1.4 m/s Drive: SEW motor with frequency inverter Electrical data: 50Hz V380-500, kW 1.5 / S1 Kdodot D R R Ejpfx Agkjw Belt: KT 96 new Year of manufacture: 2021 Side guide height: 194 mm Optionally available: Supports Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2012, Transnorm Belt Curve Conveyor Right 90°-885-700-IR400 RA1830 The Transnorm belt curve conveyor is in good used condition and fully functional. It is equipped with a geared motor from SEW. Supports are not included in the scope of delivery but are optionally available on request. Belt curve conveyors are commonly used in intralogistics for the in-plant transport of unit loads and are an essential part of modern distribution centers. Transnorm belt curves are distinguished by their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times present no problem. Tapered drums and a specially developed belt guidance system ensure maximum running smoothness. Technical Data: Type: Belt Curve Conveyor Conveying length (middle radius, NL): 1178 mm Frame width (NB): 885 mm Belt width (GuB): 700 mm Motor height (MH): 370 mm Overall height (BH): 170 mm Inner radius (IR): 400 mm Kedpfsqy Sgcsx Agkodw Conveying angle: 90° degrees Conveying speed (v m/s): 0.217 m/s Drive: SEW geared motor Electrical data: 50Hz, 230/400V, 0.25 kW / S1 Belt: (see pictures for wear) Year of manufacture: 2012 Optionally available: Supports Side guides (single or double-sided) Frequency converter All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: novo, Leto izdelave: 2022, Transnorm trakasti krivinski transporter levo 45°-950-800-IR900 - NOVO RA2306 Tehnični podatki: • Širina ogrodja (NB): 900 mm • Širina ogrodja z ležajno zaščito: 950 mm • Širina ogrodja z ležajno zaščito in zaščito gonila: 1250 mm • Širina traku (GuB): 800 mm • Višina konstrukcije (BH): 250 mm • Notranji radij (IR): 900 mm • Kot transporta: 45° Kedpfx Agougb Rgjkodw • Povprečna transportna hitrost: 0,42-1,50 m/s • Pogon: SEW motor s frekvenčnim pretvornikom • Električni podatki: 50Hz V380-500, 0,75 kW / S1 • Leto izdelave: 2022 • Višina stranskega vodila: 200 mm Opcijsko na voljo: • Nosilci Cene neto, brez DDV, iz centralnega skladišča Dr. Sonntag GmbH & Co KG, 97076 Würzburg Za individualno, strokovno svetovanje nas lahko kontaktirate po telefonu ali po elektronski pošti. Z veseljem vam pomagamo pri načrtovanju in realizaciji vaših projektov. Veselimo se vašega odziva. Lep pozdrav ekipa Dr. Sonntag GmbH & Co KG Vaš specialist in kontakt za intralogistiko.

Stanje: rabljeno, Leto izdelave: 2007, RA1154 Trakasti ovinek 60° v desno Transnorm TS1500-80 Letnik 2007 Smer teka: desno Širina traku (GB): 500 mm Notranji radij (IR): 600 mm Z notranjim in zunanjim stranskim vodilom Pogon: zunanji, vlečni Konstantna transportna hitrost: v=0,75 m/sec Vključno s 3 podpornimi nogami Za individualno in strokovno svetovanje nas kontaktirajte. Pokličite nas ali nam pišite po e-pošti. Z veseljem vam pomagamo pri načrtovanju in izvedbi vaših projektov. Veselimo se vašega odziva. Kjdpfx Agjk Aa Exoksdw Lep pozdrav Vaša ekipa Dr. Sonntag GmbH & Co. KG Vaš specialist in kontaktna oseba za intralogistiko