Stroj za upogibanje cevi z mandrelom

Jutec 5000

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck Cgodpfxsng Exao Ahxjt • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Stanje: rabljeno, Leto izdelave: 2009, Premer kroženja nad posteljo 1050 mm Razdalja med konicama 6000 mm Višina konice 520 mm Dolžina struženja 4810 mm Največja masa obdelovanca (glavna vretena) 6000 kg Največja masa obdelovanca z luneto 8000 kg Csdpfeygxy Uex Ahxogt Navor na vretenu 12500 Nm Število vrtljajev vretena 2,8-560 1/min Pomik na obrat 0,08-56 mm Premer vpenjalne glave 630 mm Najdaljša prehodna pot vzdolžnega sani (support) 4810 mm Najdaljša prehodna pot prečnega sani (support) 530 mm Najdaljša prehodna pot sani za orodje (support) 340 mm Premer konjička (pinole) 150 mm Skupna električna moč 31 kVA Teža stroja pribl. 10500 kg Potrebni prostor pribl. 7860 x 1970 x 1480 mm Oprema/dodatki: - 2 x čelna plošča - 3 čeljustna vpenjalna glava - 2 x luneta - Multifix držalo - Stružni noži - Različne konice - Tehnična dokumentacija

Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance Cjdpfxjndn Ags Ahxegt

Stanje: dober (rabljeno), Leto izdelave: 2012, CNC portalni plazemski rezalnik Proizvajalec: Microstep Tip: SPL PAA 9001.25 Leto izdelave: 2012 CNC krmiljenje Delovno območje: 2.500 x 9.000 mm 1 plazemska gorilnika z napajalnim virom Kjellberg HiFocus 280i Cgedpfeu U Hm Aox Ahxst 2 avtogena gorilnika za propan Nihajna vibracijska miza Beuting Filtrirna naprava Donaldson DFPRO12 za zunanjo namestitev 5526ä

Stanje: rabljeno, TEHNIČNI PODATKI - Število vreten: 2 - Število osi: 2 GLAVNO VRETENO - Hitrost vretena: 6500 [vrt/min] - Največji premer palice: 42 [mm] - Največji obdelovalni premer: 120 [mm] - Najmanjša ločljivost C-osi: 0,1 [stopinje] KONTRA VRETENO - Hitrost vretena: 6500 [vrt/min] - Največji premer palice: 42 [mm] - Najmanjša ločljivost C-osi: 0,1 [stopinje] ELEKTRIČNA OSKRBA - Napajalna napetost: 230 [V] Csdeu E U Ufjpfx Ahxsgt - Skupna moč: 7,5 [kW] TEŽA IN MERE - Prostor potreben: 5.400 x 1.900 [mm] - Višina stroja: 2.000 [mm] - Teža stroja: 5.000 [kg] DELOVNE URE - Ure pod napetostjo: 33.912 [h] - Obratovalne ure: 21.069 [h] DODATNA OPREMA - Krmilje: FANUC 160i - Rezervoar za hladilno tekočino - Transporter za ostružke - Enota za odvzem kosov - Trakasti transporter za kose

Stanje: novo, Leto izdelave: 2026, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Item no. 6020 With the fully automatic UniBohrFix 100 drilling machine, your material is positioned on the X-axis at the desired location, clamped in place, and drilled. All you need to do is press the start button. The positioning system’s horizontal gripper allows for easy pneumatic clamping of round tubes, rectangular tubes, angle profiles, as well as flat and solid materials. After simply entering the X-values or recalling a previously saved program, the machine operates completely independently. The Y-axis can be adjusted by the operator via a handwheel with digital display. Benefits • Sequences of holes are drilled automatically at precise intervals. • Operator errors are drastically reduced. • Programming takes only a few minutes. • Excellent price-performance ratio. • Significant reduction in manpower requirements. Cedpfofu Itbjx Ahxegt Fully automatic version Measuring length: 6,000 mm Total length: 13,500 mm NC single-axis control Pneumatic vice (clamping range 200 mm) Minimum quantity spray unit with holder and spray nozzle Drilling machine: Unimax 3T AV (technical data see datasheet) Anti-rotation device Motorized height adjustment Thread cutting device NC Positioning System PD 200p Feed force 200 kg Positioning in absolute or incremental (chain) dimensions possible Carriage with DC servomotor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high holding force Steel guide rail with precision rack and pinion Steel carrier profile as contamination protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / Load capacity 200 kg/m / Height-adjustable rollers / Mounting angles / Roller width 407 mm / Insert plates / Reinforcements / Roller diameter 50 mm / Steel rollers We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Misinvestment by a corporation. Machine is brand new and unused (already delivered). The machine is available immediately with no lead time. An absolutely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: Fully closed scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optionally 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: Direct drive Minimum index: 0.001° Maximum rotation speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: Central spindle cooling Internal coolant supply: optional CTS 7 MPa Tool magazine: Chain-type magazine, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [with >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment/options: Workpiece probe Tool measurement Laser tool control (optional) High-pressure coolant supply 7 MPa (optional) Chip conveyor Fully enclosed with roof Dimensions: n/a Cgedsxizdaopfx Ahxot Weight: n/a Connection data: n/a

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm Codpfxsirax Uo Ahxsgt -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: rabljeno, GOM - ATOS III Rev.02.1 - 3D-merilna naprava Stanje: rabljeno, zelo dobro. Codpfxoxr Umgj Ahxogt Tehnični podatki: Kamerni sistem: 2 x 8.000.000 Kamerne pike: 2048 x 2048 slikovnih pik (pribl. 4 megapiksle) Velikosti merilnega polja XYZ: 150 x 150 x 100 mm do 2000 x 2000 x 2000 mm Razdalja merilne točke: 0,075 mm do 1,0 mm Čas skeniranja: približno 2 sekundi Merilni volumen: 700 (vklj. s kalibracijsko ploščo) Tehnologija Blue-Light: Natančne meritve neodvisno od okoljskih svetlobnih pogojev. Vključuje računalniško opremo in USB ključek Programska verzija 2023 Vklj. Tritop sistem (kamera, 2x 1 m merilni letev, licenca) Vse v originalnih kovčkih Z stojalom, računalnikom, rackom, zaslonom, malim orodjem, referenčnimi točkami, 1x tipalo Priključite in takoj začnite delati…

Stanje: rabljeno, Details on request. Codpfodbmyzox Ahxsgt