4-osni obdelovalni center za palice

Elumatec SBZ 140

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, potovalna razdalja osi X: 850 mm, pomik po osi Z: 650 mm, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 11.000 W, število osi: 4, This 4-axis Elumatec SBZ-140 was manufactured in 2010. With a maximum profile length of 7600 mm and a Y-axis travel of 850 mm, it is suitable for machining aluminum and thin-walled steel profiles. The machine features an air-cooled spindle with a maximum speed of 24,000 rpm and a tool magazine capacity of 8 positions for efficient operation. If you're looking for high-quality machining capabilities, consider the Elumatec SBZ-140 vertical machining center we have for sale. Contact us for further details. • Application: Machining of aluminum and thin-walled steel profiles • Operating system: Windows • Machining capabilities: Milling, drilling, tapping, end machining • Continuous machining area: 0°-180° • Working area: • Max. profile length with end machining: 7480 mm • Max. profile length without end machining: 7600 mm • Axis travel: • A-axis rotation: 0°-180° • Programming increment for A-axis: 0.1° Hfodpfxezaq Eie Adrjh • Axis speeds: • Y-axis: up to 60 m/min • Z-axis: up to 60 m/min • Spindle: air-cooled • Tool magazine: 8 positions, traveling for fast tool change, expandable system • Machine features: Stationary profile processing, fast automatic tool change, suitable for aluminum and thin-walled steel profiles, two machining zones (optional) • Pneumatic system: 7 bar required, approx. 180 l/min air consumption (with spray system) • Electrical data: 400 V / 3-phase / 50 Hz, main connection 63 A • Control panel: 15" color display, USB interface, LAN connection Additional equipment • Angle head set (0°, 90°, 180°, 270°) for end machining and double profiles • Pendulum operation / 2 working zones (optional configuration)

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A fully automatic glazing bead saw by Schüco is available. Saw blade diameter: 400mm, cutting angles: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Hjdpfx Aswu Ez Nodrsfh

Leto izdelave: 2014, obratovalne ure: 9.544 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040735, Maksimalna dužina obrade: 7.720 mm bez obrade čeonih strana Maksimalna dužina obrade: 7.600 mm sa obradom čeonih strana X-os hod: 7.720 mm, maksimalni posmak 63 m/min Y-os hod: 845 mm, maksimalni posmak 60 m/min Z-os hod: 620 mm, posmak 60 m/min A-os opseg nagiba: -90° 0° +90° Smer obrade: odozgo/napred/nazad/(levo/desno) Poziciona tačnost: +/- 0,1 mm Snaga vretena: 11 kW; S1 vodeno hlađeno Obrtaji vretena: maks. 24.000 o/min Prihvat alata: HSK 63 F Menjač alata: automatski Pozicije za alat u magacinu: 8 mesta Automatski menjač alata za ugaonu glavu: 1 mesto Prečnik disk freze: 120 mm Dužina alata (od konusa): 150 mm Automatsko pomeranje stegača Stegači: 8 komada Operativni sistem: Windows Proizvodni softver: EluSoft, EluCAM Priključak za komprimovani vazduh: 7 bara Električni priključak: 400 V, 3 faze, 50 Hz, 25 A Potrošnja vazduha po minutu: cca 185 l sa prskanjem Potrebna površina (D x Š x V): 11.240 mm x 3.400 mm x 2.950 mm Težina: 8.200 kg Hfedpfx Aeza D Scedroh

Leto izdelave: 2003, stanje: rabljeno, 4-osni obdelovalni center z 8-pozicijskim avtomatskim menjalcem orodja za aluminijaste ali PVC profile Maks. dolžina obdelave: 6.400 mm Pomik po Y-osi: 850 mm Pomik po Z-osi: 650 mm Kot vrtenja A-osi: 0° - 180° maks. Največja hitrost: 21.000 vrt/min Operacijski sistem Windows Minimalno mazanje s pršenjem Spoznava in samodejno premikanje prijemal Hfedpfx Aeuwq S Dsdreh Transportni trak za ostružke v ležišču Odvod ostružkov Nihalno delovanje z dvema varnostnima svetlobnima barierama Nakladanje je vključeno v ceno Teža: ca. 4.500 kg V zelo dobrem stanju

Leto izdelave: 1978, stanje: zelo dobro (rabljeno), Tehnične podrobnosti: - Proizvajalec: DRAWEBA - Model: DDANS 17 l - Leto izdelave: 1978 Hodelf Iqnopfx Adrsfh - Premer žice: 1,4 - 1,6 mm - Velikost odprtine mreže: najmanj 10 x 10 mm - Širina mreže: 1600 mm

Leto izdelave: 2010, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040505, 4-osno delovno središče uporabna dolžina: 7,6 m 12 pnevmatskih sponk 2 delovni coni Hsdpfx Adjy R R Iyjrsfh

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Elumatec SBZ 140 Long version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light barriers Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F mount, 8-position automatic tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining centre (axes: X, Y, Z + A). It is designed for aluminium and thin-walled steel profiles. 4-axis CNC machining centre (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel Hfodpfx Ajx E Ahzsdroh A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC control system with PC operation, colour display, USB & network. Software: eluCam. Automatic material clamps, automatic positioning via locating pins Pendulum/shuttle operation (two work zones) improves production throughput. Besides milling and drilling, also tapping, sawing, profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The displayed price is exclusive of VAT (VAT deductible for businesses).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, skupna masa: 2.492 kg, Metal circular saw from 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It is equipped with a motorized swivel range from 22.5° to 140°, as well as a mobile roller conveyor for efficient part removal. If you are looking for a high-quality saw, you should consider the Elumatec DG 244, which we offer for sale. Contact us for further information. • Cutting length (X-axis travel): 6,000 mm (6.0 m) • Saw blade diameter: 550 mm • Control: E 355 (2-axis control) • Swivel range: 22.5° to 140° (motorized E-axis) • Software: Module for cross-cuts and overlengths (E355/E555) • Software interface: Integration for window construction software Hodpjyv H Tiefx Adrjfh Additional equipment • Short length stop: Included with stationary installation • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m long, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction system: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040685, Special features: Retrofit to WIN10 – NEW – with 6-month warranty on the PC and UPS WATER-COOLED spindle 9.5 kW S1 3-layer machining possible Meticulously cleaned and overhauled – excellent condition Description: Graphical user guidance and graphical service support A-axis for stepless top-side machining – swivel range 180° HSC milling spindle for speeds up to 24,000 rpm large machining width standard with clamp detection and automatic clamp positioning 8 tool holders Complete profile machining with stationary profile bar Fast basic positioning of the machining unit (up to 64 m/min) on the X axis robust and low-wear direct drive protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk dedicated PC keyboard Remote maintenance via TCP/IP (internet connection required) Technical data: Max. machining length without end machining: 7,600 mm Max. machining length with end machining: 7,500 mm (depends on tool) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel range A-axis freely programmable in 0.1° steps: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle output: 9.5 kW S1 Tool holder: HSK F 63 Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse protection: 35 A Tool positions for 8 tools Included accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Spray dosing unit Protective hood Front light barrier Safety fence left and right Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bars Barcode scanner with wireless transmission Special version with light barrier Further options available on request: Programming software (office) eluCad, including hotline contract for 6 months 3D import license for a machine of category “L” Data import package license for a machine of category “L” CSV import license for a machine of category “L” Macros hashing license for a machine of category “L” Other information: The machine is handed over ready for transport, including transport locks and loading onto lorry In addition, we optionally offer the following services on request: Assembly and commissioning Hodpfxsy Ah Tko Adrsfh Machine training 4/5-axis training package for machine and eluCad

Stanje: pripravljen za uporabo (rabljen), Na voljo je 4-osni CNC center za obdelavo profilov Elumatec. Različica: 7,8 m, pomiki X/Y/Z: 7720 mm/845 mm/620 mm, največja dolžina obdelave čelno/stransko: 7720 mm/7600 mm, natančnost pozicioniranja: +/-0,1 mm/m, največja hitrost vretena: 24.000 vrt/min, vpenjalo orodja: HSK-63F, orodna mesta: 8, vpenjalne naprave: 8, dimenzije stroja X/Y/Z: pribl. 11.250 mm/3.400 mm/2.950 mm, teža: pribl. 7.400 kg, delovne ure po proizvodnem sistemu: pribl. 42.200 h. Stroj nima števca ur. Dokumentacija je na voljo. Ogled na lokaciji je možen. Hfodpfx Aoy Aafxodrsh

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Kombinirana enota: Proizvajalec: GSG Podajalnik: Tip: 840.02-027 Drobilnik/lupilec: Tip: 663.02-017 Obseg žice: Ø5,5–16 mm Za valjano žico z natezno trdnostjo pribl. 40–60 daN/mm² Drobilni in upogibni valji: s karbidnimi vložki Nastavitev z reduktorskim motorjem 0,37 kW – 1,15 A Pogon krtače z reduktorskim motorjem 0,25 kW, n = 293 min⁻¹ Priključna napetost: 380–420 V, 50 Hz Enota za suho prevleko: tip: BSG/T Polnjenje: kalcijev stearat (npr. Traxit tip: D S 51 E) Poraba stearata: pribl. 350 g na tono žice Hitrost vlečenja: maks. 15 m/s Pogonska moč: 2 x 0,55 kW reduktorska motorja Kaseta: 2 reži (priloženo 1x valjčni blok + 1x kaseta) Hfsdpfxor Nfvmj Adrjh Tip: PKG/T (TS) Očiščena valjana žica Trdnost žice pribl. 40–60 daN/mm² Obseg žice: maks. vhodni premer 9,5 mm, končni premer 3,5–8,5 mm Dimenzije valjev: min. Ø115 mm, maks. Ø125 mm Premer izvrtine: Ø82 mm, širina 15–25 mm Premer hladilnega zatiča: 25 mm Poraba hladilne vode pribl. 600 l/h Vlečna stroj: Proizvajalec: Koch Tip: KHZ 5000 Leto izdelave: 1993 Serijska številka: 13.821 Število vlečnih postopkov: 1 vlečenje na blok Vlečni boben: Ø700 mm Vlečna sila: mehansko 5000 N Material žice: mehko jeklo Vhodna trdnost: pribl. 40–45 daN/mm² Maks. vlečni razpon: vhodni premer 5,0–8,5 mm Redukcija preseka: 20 x 25 % (mehanično) Vlečna hitrost: maks. 7,0 m/s Zavora: Twiflex, tip: MRB Pogon: asinhronski motor / frekvenčni pretvornik, Siemens PN=110 kW, n=1485 min⁻¹ Navijalec: Proizvajalec: Koch Tip: KHS 1250 Leto izdelave: 1993 Tovarniška št.: 13741 Premer žice: 5–8,5 mm Trdnost: pribl. 55–70 daN/mm² Hitrost navijanja: V = 7 m/s, prilagojeno vlečnemu stroju Teža polnjenja: pribl. 3000 kg Pogon navijalnega bobna: trofazni motor z zunanjim ventilatorjem Tip: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P = 37 kW, n = 1000–2000 min⁻¹, IP54, izvedba B3 Pogon za spiralno polaganje: 66-671U, 1,5 kW, 170 V, 9,8 A, 1680 min⁻¹, IP44, B5-200 S pritrjenim tahogeneratorjem TG 20, 20 V / 1000 min⁻¹ S pritrjenim čelnim zobnikom SK 32, i = 57,53, izvedba B6 Hidravlika: hidravlični agregat tip: H13 AK Pnevmatika: kolutna zavora Twiflex tip: MRB Pnevmatski cilinder tip: SPWG 28032-25 mm hod Dimenzije: 3100 × 3000 × 1700 mm (D × Š × V) brez uteži

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Stroj je v zelo dobrem stanju. Dolžina 7,6 metra, 2 delovni mesti. Možna je do 6-mesečna garancija. Hfjdpfx Asyia Ezedrsh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040164, dolžina obdelovanca (maks.): 7.900 mm, največja hitrost vretena: 21.000 obr/min, Vretenov motor je bil pred nekaj leti v tovarni popolnoma obnovljen in je bil od takrat v uporabi le približno 100 ur. Hfjdpfxsxy Hcio Adrjh TEHNIČNI PODATKI Dolžina obdelovanca: 7.900 mm Hitrost vrtenja: 21.000 min⁻¹ PODATKI O STROJU Pnevmatski sistem Tlak: 8 bar Električni podatki Tip priključka: 3/PEN Napetost: 400 V Frekvenca: 50 Hz Tok: 24 A

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Elektronski nadzor osi X Hfedpfxjyv Ag Sj Adrsh Pozicijska hitrost osi X (m/min): 25 Pnevmatsko nagibanje glav Zunanji naklon 45°/22° Mehanična nastavitev vmesnih kotov Olepnevmatični pomik žage Uporabna dolžina reza (mm): 5.000 Minimalni standardni rez z 2 glavama pri 90° (mm): 310 Premer žaginega lista (mm): 450 dotikalo

Leto izdelave: 2016, obratovalne ure: 10.900 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj je v zelo dobrem stanju in popolnoma delujoč. Ne potrebujemo ga več, zato je naprodaj. Redno je bil vzdrževan. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: Hjdswwtyljpfx Adrjfh 4-osni center za obdelavo profilov Zasnovan za prilagodljivo in učinkovito obdelavo aluminija Avtonomno pozicioniranje primežev Največja delovna dolžina: 7.600 mm 8 pnevmatskih primežev Orodni magazin s kapaciteto za 8 orodij Delovne ure vretena: 5100 h Dodatne tehnične specifikacije so na voljo na zahtevo.