Obdelovalni center Elumatec SBZ 140

Elumatec SBZ 140

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, potovalna razdalja osi X: 850 mm, pomik po osi Z: 650 mm, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 11.000 W, število osi: 4, This 4-axis Elumatec SBZ-140 was manufactured in 2010. With a maximum profile length of 7600 mm and a Y-axis travel of 850 mm, it is suitable for machining aluminum and thin-walled steel profiles. The machine features an air-cooled spindle with a maximum speed of 24,000 rpm and a tool magazine capacity of 8 positions for efficient operation. If you're looking for high-quality machining capabilities, consider the Elumatec SBZ-140 vertical machining center we have for sale. Contact us for further details. • Application: Machining of aluminum and thin-walled steel profiles • Operating system: Windows • Machining capabilities: Milling, drilling, tapping, end machining • Continuous machining area: 0°-180° • Working area: • Max. profile length with end machining: 7480 mm • Max. profile length without end machining: 7600 mm • Axis travel: • A-axis rotation: 0°-180° • Programming increment for A-axis: 0.1° • Axis speeds: • Y-axis: up to 60 m/min • Z-axis: up to 60 m/min • Spindle: air-cooled • Tool magazine: 8 positions, traveling for fast tool change, expandable system • Machine features: Stationary profile processing, fast automatic tool change, suitable for aluminum and thin-walled steel profiles, two machining zones (optional) • Pneumatic system: 7 bar required, approx. 180 l/min air consumption (with spray system) • Electrical data: 400 V / 3-phase / 50 Hz, main connection 63 A • Control panel: 15" color display, USB interface, LAN connection Additional equipment • Angle head set (0°, 90°, 180°, 270°) for end machining and double profiles Ledpfx Amszaq Eisvert • Pendulum operation / 2 working zones (optional configuration)

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), A Schüco profile workbench for sash hardware assembly is available. Assembly capacity: approx. 6–8 sashes/day, hardware: Schüco AvanTec, minimum pressure: 0.7 MPa, maximum air flow rate: 20 l/min, machine weight: approx. 1200 kg. An on-site inspection is possible. Lodpfx Amewwlk Njvsrt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Stroj je v zelo dobrem stanju. Dolžina 7,6 metra, 2 delovni mesti. Možna je do 6-mesečna garancija. Ledpfx Amoyia Ezevsrt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Max. profile length with 3-sided machining: 7,600 mm, Y-axis travel: 845 mm, Z-axis travel: 620 mm, max. traversing speed X-axis: 63 m/min, max. traversing speed Y-axis: 60 m/min, max. traversing speed Z-axis: 60 m/min, A-axis swivel range: -90°, 0°, +90°, max. spindle speed: 24,000 rpm, spindle power: 11 kW S1, machining directions: top/front/rear/left/right, positioning accuracy: 0.1 mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120 mm, saw blade diameter: 180 mm, software: eluCam, connected load: 30 kVA, compressed air connection: 7 bar, compressed air consumption: approx. 180 l/min, length: 10,775 mm, width: 3,430 mm, height: 2,950 mm, weight: 4.9 t, operating hours: 1,550 h, standby: 6,300 h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2-layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for job/machining data input and documentation. Regularly maintained, on-site inspection possible. Ledpfezbb Rrjx Amvort

Stanje: novo, Leto izdelave: 2023, Welding turntable, vessel rotator 6000 kg load capacity Digital display with foot control Diameter range: 180 mm to 3500 mm Drive roller diameter: 300 mm Lsdpfxsk Adl Hs Amvert Dimensions: Length: 1900 mm x Width: 470 mm x Height: 390 mm Infinitely variable speed: 200 - 1800 mm/min.

Stanje: pripravljen za uporabo (rabljen), Na voljo je 4-osno CNC obdelovalni center za obdelavo profilov Elumatec. Različica: 6,4 m, gib X/Y/Z: 7720 mm/845 mm/620 mm, maks. dolžina obdelave na čelni strani/brez obdelave na čelni strani: 7720 mm/7600 mm, natančnost pozicioniranja: +/-0,1 mm/m, maks. hitrost vretena: 24000 vrt/min, vpenjalni sistem orodja: HSK-63F, število mest za orodja: 8, število vpenjalnih naprav: 8, dimenzije stroja X/Y/Z: pribl. 11250 mm/3400 mm/2950 mm, teža: pribl. 7400 kg, delovni čas glede na proizvodni načrt: pribl. 42200 ur. Stroj nima ura za merjenje delovnega časa. Dokumentacija je na voljo. Možen je ogled stroja na licu mestu. Lredpey Aafxsfx Amvjt

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, delovna dolžina: 7.600 mm, številka stroja/vozila: 1400040505, število osi: 4, TEHNIČNE PODROBNOSTI Maksimalna dolžina obdelave s končno obdelavo: 7.600 mm Maksimalna dolžina obdelave brez končne obdelave: 7.720 mm OPREMA 12 pnevmatičnih vpenjalnih glav 2 delovna območja 4-osno obdelovalno središče za profile; brezstopenjska obdelava med -90° in +90° s katerim koli razpoložljivim orodjem Avtomatsko pozicioniranje vpenjal s sistemom za absolutno merjenje Dve ločeni obdelovalni coni za ciklično obdelavo 4-osno upravljanje 18,5-palčni barvni monitor, USB-priključki in omrežni priključek Operacijski sistem Windows Programska oprema EluCam Avtomatsko merjenje dolžine profila (na obeh straneh) Čitalnik črtne kode Lodpfx Amezhuyfovsrt Sistem za shranjevanje orodij, ki se premika skupaj z obdelovancem, zagotavlja kratke čase za menjavo orodij in s tem optimalne cikle obdelave; Sistem lahko sprejme osem orodij. 8 nosilcev orodij z vpenjalnimi glavami

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, ZNAČILNOSTI LINIJE Varilni stroj s štirimi glavami FUSION 4H Enota za izpust okvirjev Ledpfx Aoy S E E Nsmvjrt Prvi rezkalni modul Q-MATIC 1 Serijska povezava med varilko in čistilno enoto Rotacijska miza Elektronska čistilna enota TRIMMER 4A Izvlečna miza Drugi rezkalni modul Q-MATIC 2 Nadzorni prenosnik linije Rezilna enota Avtomatski izpust okvirjev

Leto izdelave: 2003, stanje: rabljeno, 4-osni obdelovalni center z 8-pozicijskim avtomatskim menjalcem orodja za aluminijaste ali PVC profile Maks. dolžina obdelave: 6.400 mm Pomik po Y-osi: 850 mm Pomik po Z-osi: 650 mm Kot vrtenja A-osi: 0° - 180° maks. Največja hitrost: 21.000 vrt/min Operacijski sistem Windows Minimalno mazanje s pršenjem Spoznava in samodejno premikanje prijemal Transportni trak za ostružke v ležišču Odvod ostružkov Nihalno delovanje z dvema varnostnima svetlobnima barierama Nakladanje je vključeno v ceno Teža: ca. 4.500 kg Ledpfx Ameuwq S Djvjrt V zelo dobrem stanju

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040685, Special features: Retrofit to WIN10 – NEW – with 6-month warranty on the PC and UPS WATER-COOLED spindle 9.5 kW S1 3-layer machining possible Meticulously cleaned and overhauled – excellent condition Description: Graphical user guidance and graphical service support A-axis for stepless top-side machining – swivel range 180° HSC milling spindle for speeds up to 24,000 rpm large machining width standard with clamp detection and automatic clamp positioning 8 tool holders Complete profile machining with stationary profile bar Fast basic positioning of the machining unit (up to 64 m/min) on the X axis robust and low-wear direct drive protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk dedicated PC keyboard Remote maintenance via TCP/IP (internet connection required) Technical data: Max. machining length without end machining: 7,600 mm Max. machining length with end machining: 7,500 mm (depends on tool) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel range A-axis freely programmable in 0.1° steps: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle output: 9.5 kW S1 Tool holder: HSK F 63 Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse protection: 35 A Tool positions for 8 tools Included accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Spray dosing unit Protective hood Front light barrier Safety fence left and right Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bars Barcode scanner with wireless transmission Special version with light barrier Further options available on request: Programming software (office) eluCad, including hotline contract for 6 months 3D import license for a machine of category “L” Data import package license for a machine of category “L” CSV import license for a machine of category “L” Macros hashing license for a machine of category “L” Lredey Ah Tkepfx Amvet Other information: The machine is handed over ready for transport, including transport locks and loading onto lorry In addition, we optionally offer the following services on request: Assembly and commissioning Machine training 4/5-axis training package for machine and eluCad

Stanje: rabljeno, TECHNICAL DATA - Number of Axles: 3 MAIN SPINDLE - Spindle Nose: A2-8" - Spindle Drive Power: 26 kW - Spindle Speed: 3000 rpm - Max. Bar Diameter: 91 mm - Max. Machinable Diameter: 430 mm - Max. Swing over Bed: 650 mm - Minimum C-Axis Resolution: 0.001° TURRET - Number of Positions: 12 - Number of Driven Positions: 12 - Travel X/Z: 245/1040 mm - Tool Type: BMT65 - Driven Tool Speed: 5000 rpm - Driven Tool Power: 5.5 kW TAILSTOCK - Tailstock Type: Numeric - Taper Type: MT4 - Tailstock Travel: 966 mm - Quill Stroke: 100 mm ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Power Consumption: 41 kW WEIGHT AND DIMENSIONS - Footprint: 3780 x 1610 mm - Machine Height: 1937 mm - Machine Weight: 6500 kg MACHINE HOURS - Operating Hours: 0 h ACCESSORIES - Control System: Siemens 828D - Interfaces: Ethernet / RS232 / USB / PCMCIA - Teach-In Programming: SHOPTURN - 3-color Status Light - Coolant Tank * with High Pressure Pump: 10 bar * with Rinse Gun - Chip Conveyor - Tool Measuring Probe - Parts Catcher - Bar Magazine Preparation - Preparation for Steady Rest Lrsdowyx Rnspfx Amvst - 3-jaw Chuck: SAMCHULLY 305 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 1.280 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 850 mm, pomik po osi Z: 650 mm, največja hitrost vretena: 24.000 obr/min, zasukni kot osi A (maks.): 180 °, DÉTAILS TECHNIQUES Longueur d’usinage max. sans usinage de faces d’extrémité : 4 200 mm Longueur d’usinage max. avec usinage de faces d’extrémité : 4 080 mm Courses Course axe X : 4 200 mm Course axe Y : 850 mm Course axe Z : 650 mm Vitesses de déplacement Vitesse de déplacement axe X : 65 m/min Vitesse de déplacement axe Y : 60 m/min Vitesse de déplacement axe Z : 60 m/min Ljdpfxsw Svmio Amvsrt Angle d’inclinaison axe A : 0° - 180° Précision de positionnement Précision de positionnement axe X : ± 0,1 mm Précision de positionnement axe Y : ± 0,1 mm Précision de positionnement axe Z : ± 0,1 mm Précision de positionnement axe A : ± 0,1° Vitesse de rotation max. de la broche : 24 000 tr/min Puissance nominale de la broche : 7 kW S1 Porte-outil : HSK-F63 Diamètre max. de fraise : 80 mm Diamètre max. de fraise à disques : 200 mm DÉTAILS MACHINE Consommation d’air : env. 180 l/min Poids de la machine : 4 200 kg Heures de fonctionnement Heures broche : 1 280 h Heures machine : 13 066 h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040164, dolžina obdelovanca (maks.): 7.900 mm, največja hitrost vretena: 21.000 obr/min, Vretenov motor je bil pred nekaj leti v tovarni popolnoma obnovljen in je bil od takrat v uporabi le približno 100 ur. TEHNIČNI PODATKI Dolžina obdelovanca: 7.900 mm Hitrost vrtenja: 21.000 min⁻¹ PODATKI O STROJU Pnevmatski sistem Tlak: 8 bar Električni podatki Tip priključka: 3/PEN Lrodpfsxy Hcijx Amvst Napetost: 400 V Frekvenca: 50 Hz Tok: 24 A

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Winch incl. Lifting capacity max. 2 t at 2.7 meters Lodpfx Aoq N E U Aomvort Lifting capacity max. 1 ton at 5.3 meters Operating hours: 270 h Electric: yes