Elumatec SBZ-140

Elumatec SBZ-140

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Max. profile length with 3-sided machining: 7,600 mm, Y-axis travel: 845 mm, Z-axis travel: 620 mm, max. traversing speed X-axis: 63 m/min, max. traversing speed Y-axis: 60 m/min, max. traversing speed Z-axis: 60 m/min, A-axis swivel range: -90°, 0°, +90°, max. spindle speed: 24,000 rpm, spindle power: 11 kW S1, machining directions: top/front/rear/left/right, positioning accuracy: 0.1 mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120 mm, saw blade diameter: 180 mm, software: eluCam, connected load: 30 kVA, compressed air connection: 7 bar, compressed air consumption: approx. 180 l/min, length: 10,775 mm, width: 3,430 mm, height: 2,950 mm, weight: 4.9 t, operating hours: 1,550 h, standby: 6,300 h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2-layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for job/machining data input and documentation. Regularly maintained, on-site inspection possible. Djdpfx Aezbb Rrei Uouu

Stanje: novo, Leto izdelave: 2026, Komplett automatisches Schneiden von mittelgroßen bis großen Aluminiumprofilen mit bedienerfreundlicher Automatisierung. Legen Sie einfach ein Aluminiumprofil auf, die Maschine erkennt dieses automatisch und schneidet es positionsgenau durch servomotorische Materialzuführung in die zuvor definierten Aufträge. Schneidlisten können per Excel-Jobliste und WIFI sehr einfach und effizient eingespielt werden – ideal zur Verarbeitung großer Stücklisten. Für jedes zu schneidende Aluminiumprofil, unabhängig von der Länge, misst ein Lasersensor die exakte Länge. Unser leistungsfähiger Optimierungsalgorithmus berechnet in Echtzeit die optimale Schnittreihenfolge zur Minimierung des Materialverschnitts. Die Maschine führt die berechnete Schnittliste vollautomatisch und ohne Unterbrechung aus. Es sind keine weiteren Eingaben oder Bedienhandlungen notwendig – legen Sie einfach das nächste Profil ein. Einfaches, schnelles Alternativsystem zu klassischen Doppelgehrungssägen. Geben Sie nur die gewünschten Längen und Winkel ein oder importieren Sie diese, und starten Sie den automatisierten Schneidprozess. Die Maschine fertigt Ihre Gehrungsteile kontinuierlich, hochpräzise und mit hoher Geschwindigkeit. • Vollautomatischer Schneidbetrieb mit Profilzuführung und Längenzuschnitt • Einfache Benutzeroberfläche für den automatischen Betrieb, Auftrag eingeben und in Sekunden starten • Vereinfachte Bearbeitung von Einzelteilen, Batches oder umfangreichen Excel-Stücklisten • Bündel-/Mehrfachprofilzuschnitt mit automatischer Stückzählung • Ferneingabe von Excel-Joblisten per WIFI inklusive umfangreicher Datenzuordnung • Komplett einstellbare Schnitt- und Vorschubgeschwindigkeiten für maximale Prozessproduktivität • Automatischer Optimiermodus mit Laserlängenmessung und Verschnittminimierung (optional) • Automatische Etikettierung der Zuschnitte anhand der Jobdaten (Etikettenanbringung manuell, optional) • Online-Direktdruck der Teilebezeichnung direkt auf das Material ohne Bedienereingriff (optional) • Barcodes oder QR-Codes zum Drucken oder Scannen bei der Auftragseingabe (optional) • Automatische servo-gesteuerte Positionierung des Sägegehrungswinkels bis ±75° (optional) Ideal geeignet für: • Fenster- und Türenfertigung • Herstellung von auf Gehrung gearbeiteten Aluminiumkonstruktionen • Herstellung von Aluminium-Bauteilen • Composite-Fertigung • Herstellung von Jalousien, Beschattungselementen und Möbeln • Aluminiumhandel und Einzelverkauf Dedpjf Ekn Dofx Ai Ueuu Modell: A550 Länge: 6 m Lineareinheit: ProfiStop Alpha Materiallänge: 4680 mm Schubkapazität: 20 – 40 kg Software: Optimiser QUALITÄT AUS AUSTRALIEN – MADE IN AUSTRALIA.

Leto izdelave: 2014, obratovalne ure: 9.544 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040735, Maksimalna dužina obrade: 7.720 mm bez obrade čeonih strana Dujdpoza D Scefx Ai Uju Maksimalna dužina obrade: 7.600 mm sa obradom čeonih strana X-os hod: 7.720 mm, maksimalni posmak 63 m/min Y-os hod: 845 mm, maksimalni posmak 60 m/min Z-os hod: 620 mm, posmak 60 m/min A-os opseg nagiba: -90° 0° +90° Smer obrade: odozgo/napred/nazad/(levo/desno) Poziciona tačnost: +/- 0,1 mm Snaga vretena: 11 kW; S1 vodeno hlađeno Obrtaji vretena: maks. 24.000 o/min Prihvat alata: HSK 63 F Menjač alata: automatski Pozicije za alat u magacinu: 8 mesta Automatski menjač alata za ugaonu glavu: 1 mesto Prečnik disk freze: 120 mm Dužina alata (od konusa): 150 mm Automatsko pomeranje stegača Stegači: 8 komada Operativni sistem: Windows Proizvodni softver: EluSoft, EluCAM Priključak za komprimovani vazduh: 7 bara Električni priključak: 400 V, 3 faze, 50 Hz, 25 A Potrošnja vazduha po minutu: cca 185 l sa prskanjem Potrebna površina (D x Š x V): 11.240 mm x 3.400 mm x 2.950 mm Težina: 8.200 kg

Leto izdelave: 2003, stanje: rabljeno, 4-osni obdelovalni center z 8-pozicijskim avtomatskim menjalcem orodja za aluminijaste ali PVC profile Maks. dolžina obdelave: 6.400 mm Pomik po Y-osi: 850 mm Pomik po Z-osi: 650 mm Kot vrtenja A-osi: 0° - 180° maks. Največja hitrost: 21.000 vrt/min Dodpouwq S Dofx Ai Uouu Operacijski sistem Windows Minimalno mazanje s pršenjem Spoznava in samodejno premikanje prijemal Transportni trak za ostružke v ležišču Odvod ostružkov Nihalno delovanje z dvema varnostnima svetlobnima barierama Nakladanje je vključeno v ceno Teža: ca. 4.500 kg V zelo dobrem stanju

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Elektronski nadzor osi X Pozicijska hitrost osi X (m/min): 25 Pnevmatsko nagibanje glav Zunanji naklon 45°/22° Mehanična nastavitev vmesnih kotov Olepnevmatični pomik žage Uporabna dolžina reza (mm): 5.000 Minimalni standardni rez z 2 glavama pri 90° (mm): 310 Duodpfx Aeyv Ag Sji Uou Premer žaginega lista (mm): 450 dotikalo

Leto izdelave: 2010, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040505, 4-osno delovno središče uporabna dolžina: 7,6 m 12 pnevmatskih sponk Dedpfxoy R R Iyo Ai Ueuu 2 delovni coni

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Elumatec SBZ 140 Long version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Dsdex E Ahzjpfx Ai Ujuu Light barriers Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F mount, 8-position automatic tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining centre (axes: X, Y, Z + A). It is designed for aluminium and thin-walled steel profiles. 4-axis CNC machining centre (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC control system with PC operation, colour display, USB & network. Software: eluCam. Automatic material clamps, automatic positioning via locating pins Pendulum/shuttle operation (two work zones) improves production throughput. Besides milling and drilling, also tapping, sawing, profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The displayed price is exclusive of VAT (VAT deductible for businesses).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, skupna masa: 2.492 kg, Metal circular saw from 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It is equipped with a motorized swivel range from 22.5° to 140°, as well as a mobile roller conveyor for efficient part removal. If you are looking for a high-quality saw, you should consider the Elumatec DG 244, which we offer for sale. Contact us for further information. Dsdpfx Aieyv H Tij Uouu • Cutting length (X-axis travel): 6,000 mm (6.0 m) • Saw blade diameter: 550 mm • Control: E 355 (2-axis control) • Swivel range: 22.5° to 140° (motorized E-axis) • Software: Module for cross-cuts and overlengths (E355/E555) • Software interface: Integration for window construction software Additional equipment • Short length stop: Included with stationary installation • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m long, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction system: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040685, Special features: Retrofit to WIN10 – NEW – with 6-month warranty on the PC and UPS WATER-COOLED spindle 9.5 kW S1 3-layer machining possible Meticulously cleaned and overhauled – excellent condition Description: Graphical user guidance and graphical service support A-axis for stepless top-side machining – swivel range 180° HSC milling spindle for speeds up to 24,000 rpm large machining width standard with clamp detection and automatic clamp positioning 8 tool holders Complete profile machining with stationary profile bar Fast basic positioning of the machining unit (up to 64 m/min) on the X axis robust and low-wear direct drive protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk dedicated PC keyboard Remote maintenance via TCP/IP (internet connection required) Technical data: Max. machining length without end machining: 7,600 mm Max. machining length with end machining: 7,500 mm (depends on tool) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel range A-axis freely programmable in 0.1° steps: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle output: 9.5 kW S1 Tool holder: HSK F 63 Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse protection: 35 A Tool positions for 8 tools Included accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Spray dosing unit Protective hood Front light barrier Safety fence left and right Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bars Barcode scanner with wireless transmission Special version with light barrier Further options available on request: Programming software (office) eluCad, including hotline contract for 6 months 3D import license for a machine of category “L” Data import package license for a machine of category “L” CSV import license for a machine of category “L” Dsdpfx Aey Ah Tksi Ueuu Macros hashing license for a machine of category “L” Other information: The machine is handed over ready for transport, including transport locks and loading onto lorry In addition, we optionally offer the following services on request: Assembly and commissioning Machine training 4/5-axis training package for machine and eluCad

Stanje: pripravljen za uporabo (rabljen), Na voljo je 4-osni CNC center za obdelavo profilov Elumatec. Različica: 7,8 m, pomiki X/Y/Z: 7720 mm/845 mm/620 mm, največja dolžina obdelave čelno/stransko: 7720 mm/7600 mm, natančnost pozicioniranja: +/-0,1 mm/m, največja hitrost vretena: 24.000 vrt/min, vpenjalo orodja: HSK-63F, orodna mesta: 8, vpenjalne naprave: 8, dimenzije stroja X/Y/Z: pribl. 11.250 mm/3.400 mm/2.950 mm, teža: pribl. 7.400 kg, delovne ure po proizvodnem sistemu: pribl. 42.200 h. Stroj nima števca ur. Dokumentacija je na voljo. Ogled na lokaciji je možen. Dodpfxey Aafxs Ai Uouu

Leto izdelave: 2007, obratovalne ure: 4.100 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj ni več potreben za našo proizvodnjo, zato je naprodaj. Stroj je v naši lasti od leta 2007 in je redno vzdrževan. Vse deluje normalno. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 5-osni stroj za obdelavo profilov Namenjen za fleksibilno in učinkovito obdelavo aluminija Avtonomno pozicioniranje sponk Maksimalna delovna dolžina: 9.300 mm 12 pnevmatskih sponk Magazin za orodje s kapaciteto 20 orodij in žagin list 500 mm Delovne ure vretena: 4100 h Dodatne tehnične specifikacije na zahtevo Duodpfswwtw Dox Ai Usu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Stroj je v zelo dobrem stanju. Dolžina 7,6 metra, 2 delovni mesti. Možna je do 6-mesečna garancija. Dsdoyia Ezspfx Ai Ujuu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040164, dolžina obdelovanca (maks.): 7.900 mm, največja hitrost vretena: 21.000 obr/min, Vretenov motor je bil pred nekaj leti v tovarni popolnoma obnovljen in je bil od takrat v uporabi le približno 100 ur. TEHNIČNI PODATKI Dolžina obdelovanca: 7.900 mm Hitrost vrtenja: 21.000 min⁻¹ Dsdpfx Asxy Hcisi Ueuu PODATKI O STROJU Pnevmatski sistem Tlak: 8 bar Električni podatki Tip priključka: 3/PEN Napetost: 400 V Frekvenca: 50 Hz Tok: 24 A

Stanje: rabljeno, 1) PVC Welding Machine with 2 Heads – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Two-head welding machine for PVC profiles. Machine in perfect working order, subjected to regular annual maintenance, complete with manual. 2) PVC Corner Cleaner – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaner for PVC profiles, equipped with lateral support arms. Machine in working condition, annually maintained, complete with manual. 3) Glazing Bead Cutting Saw – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cut-off saw dedicated to glazing bead cutting, designed for precision and repeatability. Included equipment: Infeed/outfeed roller conveyor Electronic management system Machine in working condition, annually maintained, complete with manual. 4) Single-head Mitre Saw - OMG Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver – Emmegi Fissa A Year of manufacture: 2012 Screwdriver for metallic reinforcements intended for frame manufacturing. Machine in working condition. 6) Hardware Assembly Bench – Emmegi BMF 3400 Year of manufacture: 2008 Bench dedicated to assembly of window & door hardware. Complete with: Screwdriver Cremone handle Hardware storage system Machine in working condition. 7) Testing and Glazing Bench – Emmegi Vitro Year of manufacture: 2008 Bench dedicated to testing and glazing operations for windows and doors. Machine in working condition. 8) Compressed Air Central System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, composed of: Boge C12-2LF soundproofed rotary screw compressor, 11 kW, inverter, air delivery 530–2,020 l/min, supersilenced version Vertical galvanized tank, 725 litres, max pressure 10.8 bar, complete with safety valve and pressure gauge MTA CA electronic timed drain valve MTA LP04 water/oil condensate separator MTA DE-XG027 compressed air dryer, 2,700 l/min air flow 9) 4-Axis Machining Centre - MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with a frontal processing head, specifically designed for aluminium machining. Maximum working length: 7430 mm X Axis – Effective working stroke: 7210 mm Y Axis (Transversal) – Effective working stroke: 550 mm Z Axis (Vertical) – Effective working stroke: 500 mm A Axis (Rotating spindle) – Rotation range: ± 180° Dsdpfoywkc Rsx Ai Usuu 10) Double Head Mitre Saw - TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max. cutting length: 4000 mm Blade inclination: outward 11) CANTILEVER Structure Double-Sided Cantilever, 1 double-faced block, 9 shelves per side: Height: 9 m Maximum load per column face: 8,100 kg Maximum load per arm: 900 kg each 12) Copy Router Single Head – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows machining on four sides without repositioning the workpiece, ensuring maximum precision and continuous operation.

Leto izdelave: 2016, obratovalne ure: 10.900 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj je v zelo dobrem stanju in popolnoma delujoč. Ne potrebujemo ga več, zato je naprodaj. Redno je bil vzdrževan. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 4-osni center za obdelavo profilov Zasnovan za prilagodljivo in učinkovito obdelavo aluminija Avtonomno pozicioniranje primežev Največja delovna dolžina: 7.600 mm 8 pnevmatskih primežev Orodni magazin s kapaciteto za 8 orodij Delovne ure vretena: 5100 h Dusdpfswwtylox Ai Uou Dodatne tehnične specifikacije so na voljo na zahtevo.