Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 11.206 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20170708, potovalna razdalja osi X: 670 mm, pomik osi Y: 830 mm, pomik po osi Z: 600 mm, model krmilnika: Heidenhain 530, največja hitrost vretena: 18.000 obr/min, A maintenance was performed on the machine in April 2025, during which the rotary union was replaced at a cost of €8,600! TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 830 mm Travel Z-axis: 600 mm Swivel range A-/C-axis: approx. -100 to +120° and -120 to +120° C-axis rotation range: 360° Fpslhey I Tvneccqmeg Table diameter: 800 mm T-slots (number x width): 9 x 90 mm Maximum table load: 1,200 kg Kessler spindle: 18,000 rpm Max. tool length: 300 mm Max. tool diameter: 75 mm Max. tool diameter (adjacent stations empty): 125 mm Max. tool weight: 7 kg Tool change time: 3 s Rapid traverse X/Y/Z: 60 m/min Max. axis speed A: 50 rpm Max. axis speed C: 100 rpm Acceleration X/Y/Z: 7 m/s² Repeatability: 0.004 mm Positioning accuracy: 0.008 mm Rotary drive system: integrated direct drives Tool holder: HSK 63 Tool stations: 96 MACHINE DETAILS Control system: Heidenhain 530 Dimensions & Weight Weight: 19,000 kg Layout with accessories (L x W x H): 4,150 x 5,000 x 3,500 mm Tank capacity: max. 330 l Total coolant capacity: max. 425 l Operating hours Control on-time: 20,248 h Machine on-time: 19,424 h Program runtime: 11,331 h Spindle hours: 11,206 h EQUIPMENT Spindle cooler Kessler rotary arm, swing diameter 800 mm, full use of zero-point clamping system Note: The probe is not included in the offer. The holders, however, are part of the offer.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 61.082 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.800 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 800 mm, model krmilnika: HEIDENHAIN TNC 426, Oprema: transportni trak za ostružke, Important information: Auction extended by 14 days. The control system has been subsequently identified as HEIDENHAIN iTNC 530. Previous specification: TNC 426. A new spindle was installed in January 2025! The machine has been regularly serviced! TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 2,200 mm Travel Z-axis: 800 mm Feed rate Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) vertical: 10,000 rpm Spindle speed S1 (continuous operation) universal swivel head 2-axis: 18,000 rpm MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (–15%, +10%) Frequency: 50 Hz Current consumption: 101.1 A Total installed power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT Highly rigid gantry design Precision linear guides and ball screw drives Spacious working area with 2.8 m X-axis travel Fjlhcoy Dgyfscqmspg High feed rates for efficient machining Ideal for tool, mold, and machine construction Documentation and acceptance certificate according to ISO standards Tool changer Cooling system Chip conveyor Interchangeable milling head with 4th/5th axis

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 10.250 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 800 mm, pomik po osi Z: 550 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 60 m/min, širina mize: 800 mm, dolžina mize: 630 mm, obremenitev mize: 1.400 kg, skupna masa: 12.500 kg, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 18.000 obr/min, delovne ure vretena: 10.250 h, dovod hladilne tekočine: 80 letvica, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, For sale: Hermle C42U Dynamic in excellent, well-maintained condition. Travel ranges: X: 800 mm Y: 800 mm Z: 550 mm A: +/-130 degrees C: 360 degrees Equipment: Control: Heidenhain TNC 640 Spindle interface: HSK-A63 Spindle speed: 18,000 rpm Large machine table: 800 mm x 630 mm Swivel rotary table with tandem drive C-axis with torque drive Linear axes Dynamic version IKZ (internal coolant supply) 80 bar with variable valve Scraper belt conveyor Tool changer plus Additional magazine ZM50 for a total of 92 tool positions Manual cabin door Manual cabin roof Laminated safety glass window Comfort operating panel External minimum quantity lubrication Tool measurement A2 Blum (tool breakage and tool measurement) 3D touch probe M&H Internal air blast External air blast Fpelhccsyma Nksqmjg Bed flushing Handte Compact extraction system Electronic handwheel Purge air for glass scales Electronic thermal compensation with controller functions HIMS basic package Special stop block Interpolated turning TNC 640 Rotoclear visual aid etc. The machine can be inspected under power by prior arrangement. The machine is available immediately! Loading of the machine will be handled by us!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, - RABLJEN - 5-OSNI VERTIKALNI OBDELOVALNI CENTER Z ROTACIJSKO IN NAGIBNO MIZO X-POT: 500 mm Y-POT: 400 mm Z-POT: 400 mm Fjlhccswl R Dqsqmjpg VRETENO: 9000 vrt/min; 13 kW; HSK 63 B-OS: -10° +95° C-OS: 360° DIMENZIJE MIZE: 700 x 500 mm NAJVEČJA DOVOLJENA OBREMENITEV: 200 kg MENJALNIK ORODIJ: VERIŽNI TIP; 16 POZICIJ KRMILNA ENOTA: HEIDENHAIN TEŽA: 3000 kg SKUPNE DIMENZIJE: 2000 x 1520 x 2140 mm DODATNA OPREMA: TRANSPORTER OSTRUŽKOV OPOMBA: ROČNA 5. OS

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, - RABLJEN - 5-OSNI VERTIKALNI OBRATOVALNI CENTER Pomik po osi X: 1000 mm Pomik po osi Y: 600 mm Pomik po osi Z: 500 mm Razdalja vreteno–miza: 682 mm Hitri pomiki X-Y-Z: 40 - 40 - 30 m/min Vreteno: 32.000 min⁻¹; HSK E50 Os B: ±25° Os C: +180°/-177° Dimenzije mize: 1400 x 815 mm Maksimalna dovoljena obremenitev: 2000 kg Menjalnik orodij: verižni tip; 20 mest Glava: avtomatska A/B os Krmilna enota: FIDIA Teža stroja: 12.000 kg Fpjlhcewmxnyecqmsg Skupne dimenzije: 2900 x 2800 x 3400 mm Dodatna oprema: izpušni sistem za odsesavanje hlapov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, CNC krmiljenje: 3D Heidenhain Millplus 5 osi Pomik X-os mm: 1250 Pomik Y-os mm: 880 Pomik Z-os mm: 800 C-os indeksiranje stopinj: 360º (0,001) Podajalne hitrosti m/min: 40 Fjlhoywfk Aoccqmjpg Hitro pomikanje m/min: 40 Maks. hitrost vretena obr/min: 15000 Moč pogona vretena kW: 15/10 (40%ED/kontinuirno) Hlajenje Prostornina rezervoarja litri: 600 Orodni sistem Vpenjanje orodij: SK 50 Število orodij v zalogi: 60 Tip menjalca orodij: Dvojni gripper Oprema Elektronski ročni kolo Transporter za odrezke Notranji dovod hladilne tekočine Vrteče zaščitno steklo Izpiralna pištola RENISHAW Paket natančnosti Notranje hlajenje 40 bar Papirni trak filter Delovni čas stroja: Ure pod napetostjo: 70059 Delovni čas vretena: 27255 Skupna moč kVA: 55 Teža: 12500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 16.729 h, CNC-krmiljenje: '3D Heidenhain Millplus 5 osi Pomik X-os mm: 1250 Pomik Y-os mm: 880 Nsbkgsywfk Aeb Ubgjwf Pomik Z-os mm: 800 Indeksacija C-os v stopinjah: 360º (0,001) Hitrost podajanja m/min: 40 Hitri pomik m/min: 40 Maks. hitrost vretena U/min: 12000 Moč pogona vretena kW: 15/10 (40%ED/cont) Hlajenje Volumen rezervoarja litrov: 600 Sistem orodij Vpenjanje orodij: SK 50 Število orodij v magazinu: 60 Tip menjalca orodij: Dvojni prijemalec Oprema Elektronski ročni kolesni krmilnik Transporter za ostružke Fjlhccey Hx Hcoqmepg Notranje dovajanje hladilne tekočine Vrteča opazovalna okna Izpiralna pištola RENISHAW Paket natančnosti Notranje hlajenje 40 bar Papirni tračni filter Skupna potrebna moč kVA: 55 Teža: 13000 kg

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 350 mm, pomik osi Y: 240 mm, pomik po osi Z: 340 mm, hitro pomikanje X-os: 20 m/min, model krmilnika: Siemens Sinumerik 840 D, skupna višina: 2.100 mm, skupna dolžina: 3.800 mm, skupna širina: 3.600 mm, obremenitev mize: 100 kg, največja hitrost vrtenja: 15.000 obr/min, skupna masa: 1.600 kg, For sale is a 5-axis machining center from DMG, model DMU 35 M, equipped with two manual axes. The machine is in good condition. Technical specifications: DMU 35 M Year: 2001 X-axis travel: 350 mm Y-axis travel: 240 mm Z-axis travel: 340 mm Spindle speed: 15,000 rpm Feed rate: infinitely variable up to 5,000 mm/min Rapid traverse: 20 m/min Clamping surface: Ø 400 x 280 mm Swivel range: 360° (mechanical) Table clamping: +105/ -150 (mechanical) Max. table load: 100 kg Tool holder: SK 40 Tool clamping: pneumatic/mechanical Space required: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be organized throughout Europe at extra cost upon request. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website. Fslhccoy Nz Nrsqmopg

Stanje: dober (rabljeno), Leto izdelave: 2015, obratovalne ure: 26.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 520 mm, pomik po osi Z: 550 mm, model krmilnika: Heidenhain iTNC 530, Oprema: transportni trak za ostružke, Posmill C 800 Kompakt Leto izdelave: 2015 Zelo dobro ohranjen stroj! Stroj je bil uporabljen izključno za obdelavo plastike (suho)! + 4. / 5. os Lehmann Edition 2 / 500 Kombiflex 4. os vrtljiva za 360° 5. os nagibna za 90° + Posoda za hladilno sredstvo in notranje hlajenje orodja (neuporabljeno) TEHNIČNI PODATKI Fslhcoy Ni U Necqmepg Pomik v osi X: 800 mm Pomik v osi Y: 520 mm Pomik v osi Z: 550 mm Tip vretena: SK40 Vrtljaji vretena: 10.000 min⁻¹ Menjalnik orodij: 24-kratni Dimenzije mize: 950 x 520 mm Krmiljenje: Heidenhain iTNC 530 Dimenzije in teža Dimenzije (D x Š x V): pribl. 2,60 x 2,60 x 2,70 m Teža: 6.800 kg Delovne ure Stroj – vklopne ure: pribl. 26.000 ur Vreteno: pribl. 16.000 ur Opomba: Vpenjalec na Lehmann delilni glavi ni vključen v ponudbo.

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 64.930 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 630 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, obremenitev mize: 400 kg, največja hitrost vrtenja: 12.000 obr/min, Potreben prostor: cca 3,5 x 2,5 x 2,5 m (D x Š x V, brez transportnega traku za odrezke) Folhoy Ncnpjccqmspg Teža stroja: cca 6.300 kg

Stanje: rabljeno, Leto izdelave: 2014, x-pomik 1.100 mm y-pomik 610 mm Fjlhoy N D E Neccqmopg z-pomik 610 mm B-os -30 / +120 ° C-os 360 x 0,001 ° Razdalja vreteno / miza 105-715 mm Dimenzije mize 1100 x 610 mm Vpenjalo orodja SK40 Vretena hitrost - brezstopenjska 14.000 obr/min Teža obdelovanca 500 kg Krmilje iTNC530 Teža stroja cca. 9 t

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Ponujamo rabljeno PEAR EC43, tip Pear EC43, letnik 2010. Folhccoy I Rv Ssqmepg Model: EC43 Serijska številka: 10436 Letnik proizvodnje: 2010 Masa: 3400 kg Napetost: V Frekvenca: Hz Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, x travel 1600 mm y travel 1000 mm z travel 780 mm - Number of machining axes (excluding parallel axes) 5 - X-axis travel 1600 mm Folhsy Ez Eloccqmjpg - Y-axis travel 1000 mm - Z-axis travel 780 mm - Clamping surface (left-right) 1000 mm - Clamping surface (front-back) 1000 mm - Workpiece weight (max) 6000 kg - - Positioning accuracy 0.001 ° - - Positioning range 2.5 ° - - Positioning range 2.5 ° - Spindle speed up to 2500 rpm - Drive power 22 kW - Number of tool positions 60 - Number of magazine pockets 2 - Pallet length 1000 mm - Pallet width 1000 mm - Number of pallets 2 - Space requirement (left/right) 6400 mm - Space requirement (front/back) 6900 mm - Overall height 4000 mm - Total weight approx. 26000 kg Control HEIDENHAIN TNC 426 The machine is in very good condition and immediately available.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Immediately available travelling column machine FS 2100 • Total travel distance X = 21,000 mm, ideal for flexible large part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless manual pulse generator HR 550 FS, operator cabin on the travelling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque Felhccqey Nbvxemspg • ICS air up to 6 bar • Dust protection packages for guiding rails and drives • BA 4 per column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor at the rear of the machine • Process monitoring ToolScope basic system • Additional control panel at the rear of the machine • Partial enclosure consisting of work area and sheet metal door, rear side with safety fence providing clear view into the work area • incl. locators • Cooling units • incl. internal tool cooling (closed cooling circuit) with cooling unit • Short delivery time, immediately available, ---subject to prior sale--- Inspection possible by arrangement Spindle hours: approx. 9,079 SPECIAL PRICE!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Immediately available: Gantry Milling Machine FS 1200 • Total travel X=12,000 mm – ideal for flexible large-part machining • Travel axes: X=12,000 mm, Y=1,500 mm, Z=3,500 mm • Control: iTNC 530 with wireless HR 550 FS handwheel, operator cabin mounted on gantry • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per gantry • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS (Internal Coolant Supply) air up to 6 bar • Dust protection packages for guiding rails and drives • BA 4 per gantry • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor at the rear of the unit • Process monitoring ToolScope basic system • Additional control panel at the rear of the unit • Partial enclosure consisting of work area and steel door, rear with safety fence and unobstructed view into the working area • Including leveling pads • Chiller units • Including internal tool cooling (closed cooling circuit) with chiller unit • Short delivery time, immediately available, ---subject to prior sale--- Fpelhcjy Nbvrecqmog Inspection by appointment possible Spindle hours: approx. 9,079 SPECIAL PRICE!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Immediately available: Gantry-type machine FS 480 Fjlhcey Nbu Iecqmjpg • Total travel range X = 4800 mm, ideal for flexible large-part machining • Travel ranges X = 4,800 mm, Y = 1,500 mm; Z = 3,500 mm • iTNC 530 control with wireless handheld unit HR 550 FS, operator cabin on the gantry • 2-axis NC universal drilling and milling head, full simultaneous and positioning operation per gantry • HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for safeguarding guides and drives • BA 4 per gantry • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor at the rear of the machine • Process monitoring ToolScope basic system • Additional operator panel at the rear of the machine • Partial enclosure consisting of machining area and sheet metal door, rear side with safety fence offering clear view into the work area • Incl. fixators • Cooling units • Incl. internal tool cooling (closed cooling circuit) with cooling unit • Short delivery time, immediately deliverable — subject to prior sale — Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!!

Stanje: rabljeno, Leto izdelave: 2011, Technical Data: X-travel: 410 mm y-travel: 610 mm z-travel: 500 mm Spindle speed: 15,000 rpm Spindle taper: SK 40 Control: iTNC 530 HEIDENHAIN smart NC Table dimensions: 320 x 320 mm Table load capacity: 100 kg Tool changer: 48 positions Total power requirement: 35 kVA Machine weight approx.: 7.4 t Required space approx.: 4.15 x 3.8 x 3.28 m 5-axis simultaneous machining center, NC rotary swivel table, C-axis 360°, B-axis +30-120°, Chip conveyor, Internal coolant supply 20 bar, 3D probing system, KinematicsOpt, electronic handwheel, Operating hours: Fpolewlhvwjhccqmsg approx. 9,600 h "machine on", approx. 3,500 spindle hours

Stanje: dober (rabljeno), Leto izdelave: 2012, Heidenhain iTNC 530 control system Working area: 800 mm x 1020 mm x 970 mm (X/Y/Z) Table size: 630 x 630 mm Table load capacity: 700 kg Maximum workpiece diameter: 900 mm Rotary table (A-/B-axis) A-axis: -185 / +45 ° B-axis: 360 ° Total power requirement: 42 kVA Machine weight approx.: 22 t Chip conveyor Belt filter system Motor spindle: 16,000 rpm Drive power: 25/35 kW Max. torque: 160/223 Nm Spindle taper: HSK-A63 Fpolhccqjrx N Tzjmsg Tool magazine: 120 positions - Probe - Kinematics package - Tool length measuring device - BLUM laser measurement system for tool monitoring - Electronic handwheel - Extraction unit - 80 bar internal coolant supply system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, - RABLJENO - 5-OSNI MOSTNI VERTIKALNI OBDELOVALNI CENTER POMIK X-OSI: 1750 mm POMIK Y-OSI: 1400 mm POMIK Z-OSI: 600 mm HITROST POMIKA X-Y-Z: 35 m/min VRETENO: 18000 vrt/min; 18,5-25 kW; HSK A63 VELIKOST MIZE: 1000 x 1200 mm MAKSIMALNA DOVOLJENA OBREMENITEV: 5000 kg MAGAZIN ORODIJ: VERIŽNI; 30 POZICIJ Felhccswl R Ddeqmspg GLAVA: AVTOMATSKA OS A/B KRMILNA ENOTA: HEIDENHAIN iTNC 530 TEŽA: 18000 kg SKUPNE DIMENZIJE: 6000 x 4000 x 3850 mm DODATNA OPREMA: TRANSPORTER ODPADKOV; PRENOSNO ROČNO KOLO; LASERSKI NASTAVLJALEC ORODIJ

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Opis: Vreteno: Tehnologija: nagibna glava z motornim vretenom Hitrost vrtenja: 24.000 obr/min Moč (maks.): 15 kW Navor (maks.): 14,3 Nm Vpenjalo orodja: HSK-A63 A-os: +/- 120° C-os: 270° Splošno: Orodni magazin: 18 postaj Vpenjalna površina: 2.350 x 1.700 mm Hitri pomik v X/Y/Z: 80/80/60 m/min Oprema/Dodatki: Merjenje obdelovanca: merilni tipalo, m&h RWP 20.50 Merjenje orodja: laser, Hexagon Fpjlhey E Ebqsccqmog Kontrola pretrga orodja: tipalo, m&h TS 35.20 Način nastavljanja: elektronski ročni kolesni regulator 3D ekstruder: CEAD S25 Sušilec/dovajalnik granulata: Vismec Dodatna oprema: hlajenje vretena

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Univerzalni rezkalno-vrtalni stroj DECKEL MAHO DMU 50 M S krmiljem Heidenhain TNC 310 Leto izdelave: 2001 Fjlhccoy Id Stsqmepg Pomiki: X 500 Y 400 Z 400 Območje vrtljajev: 20 – 4.500 obr/min, brezstopenjsko Z naslednjo opremo: Ročna nagibno-rotacijska miza z digitalnim prikazom za osi C + B Vpenjalna površina 700 mm x 500 mm Elektronski ročni regulator za osi X, Y, Z Kabina za zaščito pred škropljenjem Strojna svetilka 4 nastavljive strojne noge po višini Hladilna naprava Navodila za uporabo

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2016, obratovalne ure: 21.228 h, številka stroja/vozila: 127300000073, potovalna razdalja osi X: 2.100 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 1.250 mm, skupna masa: 46.000 kg, hitrost vretena (min.): 12.000 obr/min, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 80 letvica, 5-osni univerzalni CNC obdelovalni center z nadzorovano B-osjo in NC-rotacijsko mizo (C-os). Veliko delovno območje pribl. 2.100 x 2.100 x 1.250 mm. Opremljen z zmogljivim vretenom SK50 (52 kW, 430 Nm, do 12.000 obr/min) ter notranjim hlajenjem do 80 barov. Menjalec orodij s 60/63 mesti (verižni/kolesni magazin, dvojni prijemalec). Fpelhceyxmicocqmog Zelo dobra oprema: Blum laser, 3D quickSET, ACC in MPC. Vključuje transporter za ostružke, separator oljne megle in hladilni sistem. Ure vklopa krmilja: 47.888 h - Obratovalne ure: 21.228 h

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Deli, prikazani ročno, niso priloženi. Ob stroju so priloženi nosilci orodij SK 40. X 600 mm; Y 430 mm; Z 460 mm; A 150° x 0,001; C 360° x 0,001. 12.000 vrt/min, Heidenhain iTNC 530, 40 mest za orodje v menjalcu SK 40. Felhccslpcdwjqmjpg

Stanje: zelo dobro (rabljeno), Hello, I am offering for sale a Deckel Maho DMU 60T Machining Centre. Control: Heidenhain 430 Fsley Rb Dfshccqmjpg Machine Technical Condition: Perfect Year of Manufacture: 2000 Country of Production: Germany Machine Specifications: - X-axis travel: 630 mm - Y-axis travel: 560 mm - Z-axis travel: 560 mm - Swivelling head - Maximum spindle speed: 18,000 rpm - Tool magazine: 24 tools (2x12 tools) - Heidenhain linear scales on all axes - Through-spindle coolant - Chip conveyor - High-pressure cooling system - Centralised lubrication - Hydraulic tool clamping - Spindle taper: SK40 - Complete programming manual Mechanical and electrical documentation included. Loading included in the price. Stal-Com has been specializing for 19 years in sales, servicing, and training on CNC machines from the DMG group. We are experts in all models of Gildemeister lathes and Deckel Maho machining centres. All machines undergo a meticulous technical inspection. In addition to customers in Poland, our machines are also purchased by clients throughout Europe and parts of Asia. Each machine can be tested during production, as we are also engaged in CNC machining. After purchasing a machine from us, we provide staff training and can also help set up part production at the client's site. We collaborate with many companies on a long-term basis, supplying them with additional machine tools as required.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, • Travels: X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining: 3000 mm x 1600 mm • 2-axis NC universal drilling and milling head, suitable for simultaneous and positioning mode • Spindle: 10,000 rpm, HSK 100, 130 Nm spindle torque • Tool changer system HSK 100 / 40 stations for tools up to 750 mm long • Swarf screw conveyors in X-axis, optimized chip removal • Chip conveyor (scraper-type) for transverse discharge, make: Knoll • Coolant supply 900 l, make: Knoll • External air • ICS (internal coolant supply) 60 bar for deep hole drilling • Enclosure with safety glass panels, open top for optimized crane loading • Split sliding doors at the front • Split sliding doors on the operator side • Wireless probing system RMP 60 • Including wash gun • Including platforms on the loading and operator side • Completely factory overhauled and newly painted • Short delivery time upon agreement, subject to prior sale • Used machine • Y-axis ball screw replaced in September 2021, including bearings • X-axis linear guide and guide carriages replaced in July 2023 • Milling spindle overhauled May 2023 (new clamping set, new clamping cartridge, new rotary feed-through, general inspection performed) (23,105 spindle hours) • Under power for inspection in 72793 Pfullingen • Optional: clamps • Optional: commissioning/installation • Optional: transport Folhccoy Hmhuoqmspg • 23,122 total spindle hours • 53,991 total machine hours • Year of manufacture: 2010 Subject to prior sale