Kellenberger 600 U nakup rabljenega (77)

Stanje: rabljeno, 5 pcs. flanges and various accessories for / from Kellenberger 600 U and Kellenberger 1000 U. Guedpfxsxm Sxpo Ah Djh

Stanje: dober (rabljeno), Leto izdelave: 1988, Ref. št.: 10396 Proizvajalec: KELLENBERGER Tip: 600 U - št. 40 Leto izdelave: 1988 Način krmiljenja: konvencionalen Krmiljenje: N/A Skladiščna lokacija: Halberstadt Država izvora: Švica Razdalja med središči: 600 mm Višina središč (standardno): 125 mm Višina središč z dvignjenimi delovnimi bloki glave in konjička: 175 - 250 mm Maks. nihajni premer z dvignjenimi bloki: 350 - 500 mm Zasuk mize / na vsako stran: 10° Zadrževalni čas pri povratku mize: 0 - 5 s Gsdpfx Ajxmd R Roh Douh Premer / širina / luknja: 250 x 13 x 76 mm Hitrosti vretena brusilnega koluta: 1500/1700/2200/3600 Brusilna glava vrtljiva: 360° Prečni pomik brusilne glave: 285 mm Hitro premikanje brusilne glave naprej/nazaj: 40 mm Prekinjeno podajanje na obrat mize: 0,001 - 0,03 mm/Ø Mikronastavitev podajanja, 1 delitev številčnice: 0,001 mm / Ø Brezstopenjsko nastavljive delovne hitrosti (normalna / posebna): 20-400/10-400 Maks. dolžina brušenja: 900 mm

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 (125) mm Max. grinding wheel diameter: 400 mm Max. grinding wheel width: 50 mm Grinding spindle speed: 1500 / 1700 / 2200 rpm Drive power - grinding motor: 3.0 kW Workpiece spindle speed range: 20 - 400 rpm Automatic infeed at table reversal: 0.001 - 0.03 mm/Ø Rapid traverse (infeed/return): 40 mm Swivelling grinding spindle head: 270° (3 x 90°) Swivelling workpiece headstock: 360° Workpiece headstock: Morse taper 5 Hydraulic unit: 0.60 x 0.45 x 0.60 m Operating voltage: 400 V Grinding table: swivelling 10° Grinding wheel dimensions: Ø400 x 50 x 127 mm (left) Grinding wheel dimensions: Ø225 x 20 x 76.2 mm (right) Spindle motor drive power: 3.0 kW Tailstock quill taper: Morse taper 3 Quill stroke: 30 mm Machine weight: approx. 2.2 t Space requirement: approx. 2.58 x 1.68 x 1.67 m ACCESSORIES - Coolant tank with pump - Support stand for internal grinding spindle D 70 The machine has been overhauled both geometrically and electrically. Machine with new bearings, new paint, new control cabinet with frequency converter and AC motor for the workpiece spindle drive. New hydraulic motor, 2-axis digital readout SONY, centre height extension by 50 mm, machine feet, 1 x wheel flange left, new style tailstock (rectangular), hydraulic quill return via foot pedal, Gedpfx Ahsxh Rwye Deuh cycle spark-off time with automatic shut-off, new coolant pump, guides newly scraped with inspection report.

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Kellenberger 600 U – Univerzalni cilindrični brusilni stroj Leto izdelave: 1982 Stanje: funkcionalno / pripravljeno za uporabo Gsdpfxjxfi Aij Ah Dsuh Oprema: Dvoosni digitalni merilnik Avtomatski podajalnik brusnega kolesa Tehnični podatki: Območje brušenja: Največji premer brušenja: pribl. Ø 250 mm Največja dolžina brušenja: pribl. 600 mm Vreteno obdelovanca: Konusni priključek: MK 5 Največji zasuk mize: pribl. 10° Območje vrtljajev: pribl. 20–400 vrt/min Brusilno vreteno: Hitrosti: pribl. 1500 / 1700 / 2200 / 3600 vrt/min Konjiček: MK 3 Cena na zahtevo. Pridržujemo si pravico do napak in sprememb!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1315/451, Completely overhauled: Mechanical, geometry, hydraulic, and electrical components (checked and/or replaced) Grinding Wheelhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Workhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, belt replacement. New spindle bearings. New paint. Tailstock Disassembled, inspected and overhauled Hydraulics Disassembly, motor inspection, replacement of hoses, worn or defective parts. Inspection of hydraulic block. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of hydraulic piston, table grinding. Z Axis Disassembly, table grinding, replacement of worn or defective parts, overhaul of hydraulic piston, new paint. Electrical Cabinet Complete inspection, replacement of various relays. Paintwork Colours: White RAL 9003 and Grey RAL 7011 Geometry as per manufacturer's protocol. Inspection and cleaning of various accessories Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff position 8460.2920 TECHNICAL SPECIFICATIONS Centres distance (nominal) 600 mm Maximum centres distance (with protruding headstock) 750 mm Centres height, standard 125 mm Centres height with interchangeable shoes for headstocks 175 => 250 mm Max. workpiece diameter (125 mm centres height) 250 mm Max. workpiece diameter with interchangeable shoes 350 => 500 mm Table swiveling each direction 10° Max. surface grinding length (max. width = 200 mm) 900 mm Guedpfx Aow U Ry Nsh Djh Table speed, infinitely variable hydraulically 0 - 6 m/min approx. Table reversal dwell time 0-5 s External grinding wheel, diameter – width – bore 400 x 50 x 127 mm Surface grinding wheel 250 x 13 x 76 mm Grinding wheel spindle speed 1500/1700/2200/3600 rpm Wheelhead swiveling 270° With indexing every 90° Vertical movement of wheelhead, centre height 125-350 mm Transversal travel of wheelhead 285 mm Hydraulic rapid feed and return stroke 40 mm Incremental feed of wheel by table reversal 0.001 - 0.03 mm/dia Continuous infeed for plunge grinding 0 - 0.9 mm/dia Micrometric infeed stop, per division 0.001 mm/dia Workhead swiveling 360° Workhead spindle speed, infinitely variable (normal/special), rpm 20-400/10-400 Internal taper of workhead/tailstock 5/3 Morse Wheelhead motor, approx. 4 HP All technical data are given without guarantee and subject to errors or omissions.

Stanje: rabljeno, TEHNIČNI PODATKI - Razdalja med konicami: 600 [mm] - Višina konic: 125 [mm] - Naklon mize: 11 [°] UNIVERZALNI NOSILEC BRUSILNEGA KOLUTA - VRETENSKI NOSILEC - Dimenzije levega brusilnega koluta: 400 x 50 x 127 [mm] - Dimenzije desnega brusilnega koluta: 225 x 20 x 76,2 [mm] - Moč motorja: 3 [kW] - Hitrost vretena: 1500 / 1700 / 2200 - Usmeritev nosilca brusilnega koluta: 270 [°] NOSILEC OBDELKA - VRETENIK - Usmeritev nosilca obdelka: 360 [°] - Hitrosti vretena: 20 - 400 [obr/min] Gjdpfxjuhby Do Ah Dsuh - Notranji stožec: Morse 5 - Moč motorja: 0,9 [kW] PROTIVRETENIK - Notranji stožec: CM4 - Hod tule: 30 [mm] DIMENZIJE - Potreben prostor: 2580 x 1680 [mm] - Višina: 1670 [mm] - Teža: 2200 [kg] OPREMA - Rezervoar za hladilno sredstvo s črpalko - Notranje brusilno vreteno FISCHER

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, The machine has been inspected by a specialized company; its condition is specified in the protocol. Gedpfxewm Dpio Ah Douh Excellent condition! (Please submit your offer price) Sale only within Europe, incl. Turkey Price excluding packaging; Delivery condition: FCA (machine location) ===== For technical data, please refer to the handout. All warranty rights are excluded. We do not assume any liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sale to private individuals.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 32461/2384, Country of Manufacture: Switzerland Voltage: 380 V / 50 Hz / 3-phase Net Weight: 2,200 kg TECHNICAL DATA Nominal centre distance: 600 mm Maximum centre distance (workpiece spindle head to tailstock extended): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plates (workpiece spindle + tailstock): 175 – 250 mm Maximum swing diameter (125 mm centre height): 250 mm Maximum swing diameter with intermediate plates: 350 – 500 mm Swivelling range of work table (left/right): 10° each Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically infinitely variable: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding (diameter x width x bore): 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding (diameter x width x bore): 250 x 13 x 76 mm Grinding spindle speeds: 1,500 / 1,700 / 2,200 / 3,600 rpm Swivelling range of grinding spindle head: 270°, lockable every 90° Vertical traverse of grinding spindle head (centre height): 125–350 mm Cross traverse of grinding slide: 285 mm Hydraulic rapid infeed and retraction of the grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev. Plunge grinding stock removal: 0–0.9 mm/rev. Micrometer stop for infeed per division: 0.001 mm/rev. Swivelling range of workpiece spindle head: 360° Workpiece speeds, steplessly adjustable, standard/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5 / Morse 3 Grinding spindle motor approx.: 4 hp Errors and omissions excepted. Technical data provided subject to confirmation. Gedpfx Ahed Amifo Dsuh Inventory no. 2170089, Machine accessories list: - 1 Workpiece spindle head, Morse Taper 5 - 1 Sine bar without comparator - 1 Grinding spindle head with 4 drive pulleys - 1 Tailstock, Morse Taper 3 - 1 Collet clamping system with extractor and reduction sleeve B32 - 1 Internal grinding attachment with Fischer UJ50x250 arbor, drive pulley Ø 48 mm for 14,000 rpm - 1 Rotatable wheel dressing unit with 50 mm base - 1 Table swing stop without comparator - 1 Coolant system with decantation - 1 Ejector - 1 Balancing bar

Stanje: rabljeno, TECHNICAL DATA - Distance between centres: 600 mm - Centre height: 175 mm - Table swivelling range: 11° UNIVERSAL GRINDING WHEELHEAD - Left grinding wheel dimensions: 400 x 50 x 127 mm - Right grinding wheel dimensions: 225 x 20 x 76.2 mm - Motor power: 3 kW - Spindle speeds: 1500 / 1700 / 2200 rpm - Wheelhead swivel range: 270° WORKHEAD - Workhead swivel range: 360° - Spindle speeds: 20 - 400 rpm - Internal taper: Morse 5 - Motor power: 0.9 kW TAILSTOCK - Internal taper: MT4 (CM4) - Quill stroke: 30 mm DIMENSIONS - Footprint: 2580 x 1680 mm - Height: 1670 mm - Weight: 2200 kg ACCESSORIES - Coolant tank with pump Guedpfx Aheuhbyws Deh - FISCHER internal grinding spindle

Stanje: dober (rabljeno), Leto izdelave: 1974, Ref. št.: 10159 Proizvajalec: KELLENBERGER Tip: 1000 U Letnik izdelave: 1974 Gsdpfxew Inbwo Ah Dsuh Lokacija skladišča: Halberstadt Država izvora: Švica Dolžina brušenja: 1000 mm Premer brušenja: 250 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Machine can be inspected under power. Gujdowz Emlepfx Ah Djh

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: Gsdpfsuxft Ejx Ah Douh - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Stanje: rabljeno, TECHNICAL DATA - Distance between centers: 1000 mm - Center height: 125 mm - Table swivel range: -/+ 8° - Universal grinding wheelhead - Left grinding wheel dimensions: 400 x 50 x 127 mm - Main motor power: 3 kW - Spindle speeds: 1500 / 1700 / 2200 rpm - Wheelhead swivel range: 270° (3 x 90°) - Internal spindle bore: 90 mm - Workhead swivel range: 180° - Workhead spindle speed: 20 - 400 rpm - Workhead internal taper: Morse 5 - Workhead motor power: 0.9 kW - Tailstock internal taper: Morse 4 - Tailstock quill stroke: 30 mm - Dimensions (L x W x H): 2860 x 1680 x 1670 mm - Weight: 2500 kg EQUIPMENT - Automatic cycle (roughing, finishing, and return) - Counter-center - Sine bar for workhead - Headstock UR: 2 external and 1 internal grinding wheel - Coolant tank with pump - 1 internal grinding spindle SFJ UJ70: 14,000 rpm - Fixed diamond dresser on tailstock Guedsuhbx Tjpfx Ah Doh - 1 four-jaw chuck - 1 magnetic chuck - 1 set of drive dogs - 2 two-position steadies - Spacer for 175 mm height - Various grinding wheel adapters - Various grinding wheels

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Grinding diameter: 80 - 250 mm Grinding length: 600 mm Centre height: 175 mm Longitudinal travel: 750 mm Workpiece speed: 6 - 600 rpm Grinding spindle speed: 1500 - 3600 rpm Cross travel - automatic and manual: 320 mm Control: Kelco 80 Gjdpfx Ahou D I Tlo Dsuh Total power requirement: kW Machine weight approx. 4.4 t Space requirements approx. 3.1 x 2.1 x 2.0 m

Leto izdelave: 1979, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Centre height: 125 mm + heights of 50 mm Distance between centres: 1,000 mm Grinding wheel › Diameter: 400 mm › Width: 50 mm › Bore: 127.0 mm Swivel angle: 270° Workpiece spindle head speed: 20 – 400 rpm Spindle taper: 5 MT Tailstock taper: 3 MT Table swivel angle: 8° Table speed: stepless up to 6.0 m/min Internal grinding spindle with 60,000 rpm External grinding wheel motor: 4.0 kW Workpiece spindle motor: 1.5 kW Machine weight: 3,100 kg Machine dimensions: 2,860 × 1,680 × 1,670 mm (L × W × H) Gedjk H Hp Nspfx Ah Djuh EQUIPMENT & SCOPE OF DELIVERY • Machine has been completely retrofitted • New control cabinet & new circuit diagram • New motor & frequency converter for the workhead • 2-axis DRO • Coolant tank with paper filtration • Geometry manufactured according to Kellenberger protocol • Internal grinding spindle • Extensive accessories Please refer to the attached inspection report for further information on the machine.

Stanje: rabljeno, Grinding diameter: 250 mm Grinding length: 600 mm Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: +/- 360° Grinding headstock swivelling: +/- 0° Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: +/- 10° Table longitudinal travel: 700 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported incl. clamping): 130 kg Cross travel: 270 mm Tailstock quill taper: MT3 Quill travel: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t As a world-leading company in Kellenberger overhauls/retrofits, we not only deliver machines in as-new condition with warranty but can also offer comprehensive service for your machines. Gedpfxjd Ih Eho Ah Djuh Overhauled to Kellenberger guidelines, including new, modern, and future-proof control system. Photo shows an already delivered machine. - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are almost identical to the original control, so no retraining is necessary. - Diagnostic function with display of PLC messages and digital I/O. - Dressing function can be upgraded or modified to customer requirements. - Workpiece spindle can be stopped in an oriented position upon request. - Maximum infeed can be increased to 40 mm on customer request. - Digital display in 2 axes. Resolution X-axis: 0.5 µm Options: - Rotary encoder with digital display on workpiece headstock - Rotary encoder with digital display on grinding headstock (no vertical adjustment possible with spindle) - New, stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase centre height up to max. 225 mm - Variable speed control for the grinding spindle Including: - New DGS paper band filter - Operating tools - Clamping tube for chuck Further accessories available on request. The machine is equipped on the X-axis with an electronically controlled infeed system with stepper motor drive. Hydraulic table longitudinal and rapid traverse feed. Versatile use in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. A risk assessment as per BetrSichV must be carried out to determine the necessary minimum safety measures.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina središča: 250 mm, širina na sredini: 1.500 mm, premer brušenja: 500 mm, Gib pinole konjička: 30 mm, Oprema: dokumentacija / priročnik, Stroj bol čiastočne generálne opravený a zahŕňa okrem iného novú geometriu a nový rozvádzač. Ložiská boli vymenené. TECHNICKÉ ÚDAJE OBRÁBACÍ PRIESTOR Vzdialenosť medzi hrotmi: 1 500 mm Výška hrotov: 250 mm Max. brúsený priemer: 500 mm Náklon stola: ± 8 ° BRÚSIACA HLAVA Rozmery brúsneho kotúča: 400 x 50 x 127 mm Otáčky vretena: 1 500 / 1 700 / 2 200 ot./min Vnútorný otvor vretena: 90 mm OPRACOVÁVACÍ HROTOVÝ DRŽIAK Orientácia hrotového držiaka: 180 ° Otáčky vretena: 20 - 400 ot./min Kužeľ vretena: Morse 5 KONÍK Kužeľ koníka: Morse 4 Zdvih pinoly koníka: 30 mm DETAILY STROJA POHONY Výkon motora brúsnej hlavy: 3 kW Výkon motora koníka: 0,9 kW Gjdjxgrd Sjpfx Ah Dsuh ROZMERY STROJA Rozmery: 2 860 x 1 680 x 1 670 mm Hmotnosť: 2 500 kg VYBAVENIE Automatický pracovný cyklus Nádrž na chladivo s čerpadlom Vnútorné brúsiace vreteno Vonkajšie brúsne kotúče Oriezavacie zariadenie Dokumentácia Poznámka: Digitálny ukazovateľ je možné zakúpiť voliteľne za 3 600 €.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina središča: 175 mm, širina na sredini: 1.000 mm, premer brušenja: 350 mm, Gib pinole konjička: 30 mm, Oprema: dokumentacija / priročnik, The machine has been partially overhauled and includes, among other features, new geometry and a new control cabinet. The bearing has been replaced. Gujdexgq U Aepfx Ah Deh TECHNICAL DETAILS Machining Area Centre distance: 1,000 mm Centre height: 175 mm Maximum grinding diameter: 350 mm Table swivel: -/+ 8° Grinding Head Universal grinding head: available Grinding wheel dimensions: 400 x 50 x 127 mm Spindle speeds: 1,500 / 1,700 / 2,200 Bore for internal spindle: 90 mm Spindle Spindle speed: 20 – 400 rpm Spindle taper: Morse 5 Tailstock Headstock rotation: 180° Internal taper (tailstock): Morse 4 Quill stroke (tailstock): 30 mm MACHINE DETAILS Drives Grinding head motor power: 3 kW Tailstock motor power: 0.9 kW Machine Data Dimensions: 2,860 x 1,680 x 1,670 mm Weight: 2,500 kg EQUIPMENT Automatic working cycle Tailstock Coolant tank with pump 1 internal grinding spindle External grinding wheels Dressing device Documentation Note: A digital readout can be optionally purchased for €2,500.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina središča: 250 mm, širina na sredini: 1.500 mm, premer brušenja: 500 mm, Gib pinole konjička: 30 mm, Oprema: dokumentacija / priročnik, The machine has been partially overhauled and includes, among other features, new geometry and a new control cabinet. The bearing has been replaced. TECHNICAL DETAILS Working Area Centre distance: 1,500 mm Centre height: 250 mm Max. grinding diameter: 500 mm Table swivel: ± 8° Grinding Head Grinding wheel dimensions: 400 x 50 x 127 mm Guodpfswziidjx Ah Deh Spindle speeds: 1,500 / 1,700 / 2,200 rpm Internal spindle bore: 90 mm Workpiece Headstock Headstock alignment: 180° Spindle speed: 20 – 400 rpm Spindle taper: Morse 5 Tailstock Tailstock taper: Morse 4 Tailstock quill stroke: 30 mm MACHINE DETAILS Drives Grinding head motor power: 3 kW Tailstock motor power: 0.9 kW Machine Data Dimensions: 2,860 x 1,680 x 1,670 mm Weight: 2,500 kg EQUIPMENT Automatic operating cycle Coolant tank with pump Internal grinding spindle External grinding wheels Dressing device Documentation

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina središča: 175 mm, širina na sredini: 1.000 mm, premer brušenja: 350 mm, Gib pinole konjička: 30 mm, Oprema: dokumentacija / priročnik, The machine has been partially overhauled and includes, among other things, new geometry and a new control cabinet. The bearings have been replaced. TECHNICAL DETAILS Working Area Centre distance: 1,000 mm Centre height: 175 mm Max. grinding diameter: 350 mm Table swiveling: -/+ 8° Grinding Head Universal grinding head: available Grinding wheel dimensions: 400 x 50 x 127 mm Spindle speed: 1,500 / 1,700 / 2,200 rpm Bore for internal spindle: 90 mm Spindle Spindle speed: 20 – 400 rpm Spindle taper: Morse 5 Gedpfx Aowzicqoh Deuh Tailstock Tailstock head rotation: 180° Internal tailstock taper: Morse 4 Tailstock quill travel: 30 mm MACHINE DETAILS Drives Grinding head motor power: 3 kW Tailstock motor power: 0.9 kW Machine Data Dimensions: 2,860 x 1,680 x 1,670 mm Weight: 2,500 kg EQUIPMENT Automatic working cycle Tailstock Coolant tank with pump 1 internal grinding spindle External grinding wheels Dressing device Documentation

Stanje: zelo dobro (rabljeno), with internal grinding attachment Centre height: 125 mm Centre distance: 600 mm Grinding wheel: 400 x 40 x 127 mm Various accessories Gjdpfeiu E Trox Ah Douh MARCELS MASCHINEN AG

Stanje: pripravljen za uporabo (rabljen), višina središča: 175 mm, dolžina brušenja: 600 mm, ★ TOP maintained machine from the liquidation of a renowned toolmaker – check out our other listings as well★ ★ KELLENBERGER 600U-175 Cylindrical Grinder (Internal & External) with a wealth of accessories ★ Year of manufacture: Approx. 1987 Machine No.: 32.467.2987 Condition: Not tested Delivery terms: Free loaded on truck – unpacked Location: 73347 Mühlhausen, Germany Availability: Beginning of December 2025 – Items must be collected by the buyer in calendar week 49 / 2025 without exception. The exact date will be specified by us. Earlier availability may be possible by arrangement. Payment terms: Advance payment by bank transfer Internal Ref. No.: JO8 Machine can be inspected under power: YES ⚙️Technical Data: - Distance between centres: 600 mm Gujdpfoxiy N Uex Ah Deh - Centre height: 175 mm - Max. workpiece diameter: 349 mm - Max. grinding wheel dimensions: 400 x 50 x 127 mm - Grinding spindle motor power: 3 kW - Grinding spindle speeds: 1500 / 1700 / 2200 rpm - Workpiece spindle speed: Infinitely variable 20–400 rpm - Total power requirement approx.: 6 kW - 380 V / 50 Hz / 10 A - Equipped with internal grinding attachment - Supplied with extensive range of accessories as per photographs - Further data see images Scope of delivery: - Available manuals - Extensive accessories as shown in the pictures Dimensions & Weights: - Footprint L x W x H approx.: 2500 x 2000 x 1600 mm + pallets with accessories - Weight approx.: 2500 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us. ⚠️Be sure to also check out our other listings⚠️ Additional Notes: ►We expressly recommend collection via direct transport (haulage) ►Goods are sold under exclusion of any warranty ►Technical data provided without liability ►Subject to prior sale ❗Sale exclusively to business customers❗

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Stroj se prodaja kot pokvarjen. Gujdpfx Ahoxfth As Doh

Stanje: rabljeno, Internal diameter: 340/440 mm Grinding depth: 99,999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece spindle head swivels: 360° Grinding spindle head swivels: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±10° Table longitudinal travel: 900 mm Table feed rate: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (chucked): 130 kg incl. clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Required space approx.: 3.1 x 2.0 m As the world’s leading specialist in Kellenberger overhauls and retrofits, we are not only able to deliver machines in as-new condition with warranty, but also provide comprehensive service for your equipment. Warranty: 12 months from delivery—for Germany and neighbouring countries. Pure internal cylindrical grinder with infinitely variable drive control (0–100%) Also available in current colour schemes! Standard centre height: 175 mm. Upgradable to 225 mm. Fixed internal grinding spindle, belt tensioned via tensioning pulley. Z-axis reversal precision: max. 0.01 mm Geometrically overhauled and newly painted, including: - New control cabinet - New workpiece spindle motor and 3-phase controller - 2-axis digital readout, x-axis resolution 0.5 μm Gjdpfx Asd Ih Dxsh Djuh Options: - Rotary encoder with digital display for the workpiece spindle head - New heavy-duty internal grinding fixture, diameter 80 mm or 100 mm, with height adjustment - Centre height increase to max. 225 mm Included: - Operating tools Further accessories available on request. The machine tool does not currently comply with the essential health and safety requirements as set out in BetrSichV 2015. Assessment for raising the minimum required safety standard must be carried out by means of a risk evaluation according to BetrSichV.

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180 ± ° Grinding spindle speed: 1,500; 1,700; 2,200 rpm Incremental feed: 0.001-0.030 mm/Ø per stroke Continuous feed: 0-0.95 mm/Ø Table swivelling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02-6 m/min Workpiece weight between centers: 130 kg Gusdpfx Ahjd Ih D Ns Doh Max. workpiece weight – cantilevered: 130 kg incl. clamping Internal spindle bore: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space required approx.: 3.1 x 2.0 m As the world’s leading company in Kellenberger – Overhaul / Retrofit, we are not only able to deliver machines in like-new condition with warranty, but can also offer service for your machines, metrically overhauled and newly painted. Version R: The machine is equipped with central lubrication and roller guides on the X-axis flat bed as well as air lift at the grinding headstock. – Digital display on 2 axes. X-axis resolution: 0.5 µm Optional extras available at a surcharge: – Rotary encoder with digital display on the workpiece headstock – Rotary encoder with digital display on the grinding headstock (no height adjustment with spindle possible) – New heavy-duty internal grinding attachment for 80 mm or 100 mm diameter, with height adjustment – Increase in centre height up to max. 225 mm – Variable speed control for grinding spindle Included: – Operating tools – Clamping tube for chuck Further accessories available on request. The machine tool does not currently comply with the fundamental safety and protection requirements stipulated in the BetrSichV 2015. A risk assessment according to BetrSichV is required to determine if the minimum necessary protection targets are met.