Ima C 21 nakup rabljenega (139)

Stanje: rabljeno, številka stroja/vozila: 008269, Pozicija 1: Nakladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 2: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 3: Dvostranski robni lepilni stroj IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 4: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 5: Razkladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Nwedpfxsx A Hgge Adysb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Ta popolna IMA Combima linija za lepljenje robov z nakladalno postajo je bila izdelana leta 2002. Gre za robusten dvostranski stroj za lepljenje robov s širino obdelave od 235 do 2600 mm in dolžino od 200 do 2600 mm. Deluje s hitrostmi od 10 do 40 m/min, vključuje enoto za spajanje, polavtomatsko lepilno enoto z 6-mestnim magazinom robnega traku ter enote za ravno in profilno obrezovanje. Izkoristite priložnost za nakup te dvostranske lepilke IMA Combima. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Lepljenje robov Njdjx D Iq Nopfx Adyewb

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, IMA adapter unit, interchangeable module, edge trimming cutter, flat draw blade The IMA adapter unit is a refurbished interchangeable module for edge trimming cutters, equipped with a flat draw blade. With the item number 10 237 069 and an HSK 63 F mounting system, this unit is perfect for precise and secure machining operations. The unit rotates in sync with the drive direction and features a 57 mm opening. It is specifically designed for use with IMA machines and supports tools with bevel cutters. A flat draw blade is included in the scope of delivery. The bolt dimensions are 16/18.1 mm. The unit achieves a maximum speed of 9,000 RPM and a maximum probe travel of 1.5 mm. Thanks to comprehensive refurbishment—during which the unit was inspected, newly re-bearings installed, and pneumatic hoses replaced—it offers top safety and precision with an as-new condition. Used adapter units are removed from operational systems and are fully functional. Should age-related wear or significant loss of precision be present, this will be expressly highlighted. Technical Description Product: IMA Adapter Unit, Interchangeable Edge Trimming Cutter Module, Flat Draw Blade Item Number: 10 237 069 Mounting System: HSK 63 F Condition: Refurbished Rotation Direction: With drive direction Opening: 57 mm Support Bolt: For IMA Tools: For use with bevel cutters Nwjdpoudl Idefx Adyjb Flat Draw Blade: Included Bolt Dimensions: 16/18.1 mm Max. Speed: 9,000 RPM Max. Probe Travel: 1.5 mm Features: • Inspected and fully re-bearings for maximum safety and precision • Pneumatic hoses replaced • Technically as-new condition Please also visit our webshop for more units from various manufacturers.

Stanje: rabljeno, številka stroja/vozila: 006619, Pozicija 1: Nakladalec IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 2: Dvo-kotni profilirni stroj – samostojni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 3: Obratnik plošč IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 4: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 5: Transfer IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 6: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 7: Obratnik plošč IMA + MEINERT-COMBIMA/I/R75/2050 Nwedpfx Adeqy Em Njysb Pozicija 8: Razkladalec IMA + MEINERT-COMBIMA/I/R75/2050

Stanje: rabljeno, številka stroja/vozila: 007857, Pozicija 1: Horizontalno skladišče IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 2: Krožna žaga za plošče z avtomatskim skladiščem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Nedpfx Aewuuf Djdyowb Pozicija 3: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 4: Nakladalec IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 5: Razkladalec IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 6: Obdelovalni center z robnim lepljenjem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 7: Obdelovalni center z robnim lepljenjem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 8: Stroji za rezanje kartona IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 9: Stroji za povezovanje IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) Njdpfxod Nt Rqs Adyjwb - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin Njdpfxodh Tfgs Adyswb FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (optionally 3000) Cam pitch (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transfer bar (Master & Slave systems) FORMAT PROCESSING (for each side): Njdju Ekbnopfx Adyowb Spray unit (for liquid release agent) Jointing cutter unit 08.376 (4.5 kW x 2) Free space EDGE GLUING PROCESSING (for each side): Gluing unit (hot melt adhesive) 283.205 Edge pressure section. Edge magazine for rolls (No. 2 positions) End trimming unit 08.42 (0.2 kW x 2) 0°-25° (max. working speed 50 m/min, servo motor) Milling unit 08.055 (0.66 kW x 2) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (0.66 kW x 2) Spray unit (for polishing fluid) Free space (for optional scraper addition) Buffing unit 08.617 (0.18 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in strips / banding (min/max) mm: max. 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 Safety and soundproof enclosures FORMATTING UNIT (for each side): Pre-milling cutter 75.186 (1 x 4.4 kW) Planing unit (2 x 6.6 kW) + spare position EDGE BANDING SECTION (for each side): Nwsdpjwz Ic Aofx Adyob Infrared heating for workpiece edge pre-warming Gluing unit (hot melt adhesive) 04.1570 Pressure zone + edge magazine for rolls (compartment no.) 2 End trim saw 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling unit 08.0555 (1 x 0.66 kW) Multifunction unit (radius milling and profile trimming) MFA 08.342 (2 x 0.66 kW) SERVO Max 20 m/min Profile scraping unit 08.519 Flat scraping unit 08.50 Spraying unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving/rebating and profiling: 75.30 (2 x 4.4 kW)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm Veneer edging possible up to max. 1.0 mm (restricted) Panel thickness (min/max): 8 / 60 mm ICOS Open control unit Feed speed m/min (adjustable): 6 - 30 Top pressure driven by V-belt Nedpfx Ajxp E R Dedyowb Sprayer unit (for liquid anti-stick agent) Adjustable fence, CNC controlled – Panel infeed system 63.152 (500 x 500 mm) Jointing unit with CNC control 08.379 (4.0 kW x 2) – Edge pressure zone (CNC controlled) Gluing section (P.U.R. adhesive + pre-melter) VTG + 283.203 Edge magazine for rolls (No. 1 + 6 compartments) Pre-milling unit 08.055.0.1680 (1.85 kW x 1) End trimming unit 08.42/30/B (0.66 kW x 2) 20 + 30 m/min (0°-25°) Milling unit 08.0587 (1.0 kW x 2) multi-profile – (1 + 3 profiles) Sprayer units (for sliding fluid) Contour milling unit (for fine trimming) CNC controlled – KFA 20 (0.18 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-2 (0.18 kW x 2) Standard milling unit for grooving/rebating 08.190 (4.5 kW x 1) 90°/180°/270° (CNC controlled)

Stanje: generalkompletno obnovljen (rabljeno), Single-sided edge processing and edge banding machine (left-hand side) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed rate (adjustable) m/min: 6 - 30 EDGE PROCESSING: Jointing unit with CNC control 08.376 (2 x 4.5 kW) Spraying unit (for liquid release agent) EDGE BANDING SECTION: Lamps for panel edge heating Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for roll material (compartment N° 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0-25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° + spraying unit (for sliding agent) Contour milling unit (for fine trimming) CNC controlled 08.348 (2 x 0.66 kW) Multi-profile scrapers (CNC controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Nedpfx Adecr T N Deyowb Buffing unit 08.614 (2 x 0.25 kW) Universal milling unit for grooving, rebating, and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edges WI (4 x 0.75 kW)

Stanje: zelo dobro (rabljeno), DVOJSTRANA FORMATNA I MAŠINA ZA NANOŠENJE IVICA – Prva (1.) mašina u liniji Debljina ivice u roli (min/max) mm 0,3 / 3 Debljina ploče (min/max) mm 8 / 45 (60) Radna širina (min/max) mm 250 / 1300 Upravljanje / softver ICOS Open (Windows baza) Brzina pomeranja (podesiva) m/min 10 - 50 (Master & Slave) Zaštitne i zvučno izolovane kabine FORMATIRANJE (za svaku stranu): Agregat za obradu ivica (2 x Kw 6,6) Maks. 35 m/min Agregat za pripremu ivica 75.186 (1 x Kw 4,4) OBRADA IVICA (za svaku stranu): Lepilni agregat (P.U.R. lepak + pretopni uređaj + Hot Melt lepak) VTG 3-24 + 283.201 + 283.19 + 283.203 Nedsxggthspfx Adyowb Pritisna zona Magacin ivica za rolne (pretinac br. 24) Predfrézerski/frézerski agregat 08.055 (2 x Kw 1) 0°-30° (30 m/min) Predfrézerski/frézerski agregat 08.055 (2 x Kw 1) 0°-30° (30 m/min) Agregat sa profilnom vučnom nožem 08.515 Agregat sa ravnom vučnom nožem 08.521 Agregat za poliranje 08.617-2 (2 x Kw 0,18) 3 x standardni frézerski agregati za nutovanje/pravljenje falcova (2 levo + 1 desno) 08.190 (Kw 4,5x3) 90°/180°/270°

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a processing line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/software: ICOS Open (Windows based) Without transfer rail (Master & Slave systems) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins "Hopper" (panels fall directly onto the motorized caterpillar chains) Cam distance (mm): 270 FORMAT PROCESSING (for each side): Spraying unit (for liquid nonstick agent) Pre-milling cutter 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Free space EDGE PROCESSING (for each side): Gluing unit (hot melt glue + pre-melter) 04.1570 + 283.201 Pressure zone + edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Nwedpeum Untofx Adyob Milling unit 08.055 (2 x 0.66 kW) 30 m/min Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: zelo dobro (rabljeno), KOMPLETNE DVOSTRANE MAŠINE ZA FORMATIRANJE I NANOŠENJE KANT TRAKE, sačinjene od: OZ2050A) Stanica za ubacivanje 'MEINERT' model P 415 D/B - L, dvostruka stanica za prihvat. Sa centralno motorizovanim rolno-stolom. Sa dve motorizovane rolne postavljene na podu za dopremu složenih ploča do stanice za ubacivanje. Njdpfoxftt Eex Adyjwb OZ2050B) Prva dvostrana mašina za formatiranje i lepljenje kant trake 'IMA' model Combima / II / 440 / A / R3 OZ2050C) Povezani rolni sto 'IMA' model IDK L/Q sa obrtanjem (od uzdužnog ka poprečnom smeru) OZ2050D) Druga dvostrana mašina za formatiranje i lepljenje kant trake 'IMA' model Combima / II / 590 / B / R3 OZ2050E) Povezani rolni sto 'IMA' model IDK Q/L sa uređajem za obrtanje (od poprečnog ka uzdužnom smeru) sa dvostrukim konus sistemom OZ2050F) Dvostrana stanica za skidanje sa palete 'MEINERT' model P 415 D/S - L, kompletna sa centralno motorizovanom rolnom trakom. Sa dve motorizovane rolne trake.

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Safety and sound insulation cabins FORMATTING (per side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING (per side): Gluing unit (hot melt adhesive + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (number of slots): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°–30° Milling unit 08.055 (2 x 0.66 kW) 0°–30° Profile scraper unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) Nodeunrwnopfx Adyewb No. 2 universal milling units for grooving, rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°–180°

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edgebanding material (coils) thickness (min/max) mm: 0.3 / 3 – Edgeband thickness in strips / tapes max mm: 1.0 Njdpfxoxggzle Adyjwb Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control/Software: ICOS Open (Windows based) Feed speed (adjustable) m/min: 10 - 50 (Master & Slave) Protective and noise reduction cabins FORMATTING SECTION (for each side): Pre-milling cutter (pre-milling) 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Max 35 m/min Jointing milling unit 75.186 (1 x 4.4 kW) EDGEBANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) VTG 3-24 + 283.203 Pressure zone + edge magazine for rolls (slot no. 24) End trimming unit 08.42 / 30 / B (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling/milling unit 08.055 (2 x 1 kW) 0°-30° (30 m/min) Multifunctional unit (radius & contour milling unit) MFA 08.342 (2x0.66 kW) SERVO Max 20m/min OPTIONAL: KFA 30 Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.604 (0.25 kW x 4) 2 x standard milling units for grooving/rabbetting (1x left + 1x right) 08.190 (4.5 kW x2) 90°/180°/270°

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness for rolls (min/max) mm: 0.4 / 3 Nwjdpfjfi Tkvex Adysb Edge thickness for strip veneer (max) mm: 1.3 Panel thickness (min/max) mm: 10 / 45 Working width (min/max) mm: approx. 244 / 2300 Control/Software: ICOS Open Feed speed (m/min): 8 - 40 No transmission bar (Master & Slave systems) Safety and noise protection enclosure Retractable alignment stops, distance (mm): 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. adhesive + premelter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End-trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°-30° Multifunction unit (radius milling and profile trimming) MFA 08.342 (0.66 kW x 2), max 25 m/min Profile trimming unit (copying) 08.465 (0.18 kW x 4), max 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free bay

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINES – First (1st) machine in line Edge thickness from coil (min/max) mm Edge thickness in strips (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/software ICOS open Feed speed (adjustable) m/min 9 - 45 No transfer bar (master & slave systems) Pressure belt driven by V-belt FORMATTING UNIT (for each side): Jointing/milling unit 75.30 (kW 6.6 x 1) EDGE-BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1569 + 283.205 Pressure rollers (turret) for straight and softforming edges mm 1,050 Edge magazine for coils (number of slots) 6 End trimming unit 08.42 (kW 0.2 x 2) 40 m/min Pre-milling unit 08.055 (kW 0.66 x 2) 0°-30° Milling unit 08.0582 (kW 0.66 x 2) 0°-30° Scraper unit 08.50 Buffing unit 08.617-2 (kW 0.18 x 2) Nwjdsfi Tkgjpfx Adyob

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control unit: ICOS Open Feed speed m/min (adjustable): 16 - 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable stop ruler, CNC controlled Jointing unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) VTG + 283.203 Edge magazine for rolls (number of compartments): 6 End trimming unit 08.42/30/B (Kw 0.2 x 2) max 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2), 4 profiles Multifunctional unit (radius and contour milling) KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 08.190 (Kw 4.5 x 1) 90°/180°/270° CNC Nsdsd Scydepfx Adyowb

Stanje: rabljeno, Complete factory for furniture production, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (mm 5700x2700) with stacking system "SIRIO" SZ0M25) Panel saw "GIBEN" Mod. GammaDue (mm 3800x2200) SZ0M26) Panel saw (multi-blade saw) "GABBIANI" (finished panels mm 4250 x 2120) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (film lamination/glue on paper) SZ0M29) Press line "COLOMBO REMO" (mm 1400x9600) for paper/veneer/laminated materials SZ0M30) Press line "FRIZ" (mm 1400x6200) for paper/veneer/laminated materials SZ0M41) Double-sided edge banding and sizing line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided edge banding and sizing line "IMA" Combima Softforming with a second double-sided edge banding and sizing machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with splitter "NARDELLO" Mod. Elegance SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed system and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and winding machine "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cross-cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Pre-assembly line for honeycomb panels Nwjdpfecr U Urox Adyjb SZ0M18) No. 6 multi-opening press "COLOMBO REMO" (mm??x mm??) SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI+ELMAG+ COSTA LEVIGATRICI" Many other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, racks (wall-mounted shelving), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Nsdod Rcigopfx Adyjwb Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable) 6 - 30 No transmission bar (Master & Slave systems) Top pressure driven by V-belt Sprayer unit (for liquid anti-stick agent) Jointing milling unit 08.376 (4.5 kW x2) Free position Glue application unit (hot melt glue) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 2 End trimming unit 08.42 (0.66 kW x 2) 0°-25° Milling unit 08.055 (1 kW x 2) 0°-30° Multifunctional unit (radius and profile milling unit) 08.342 (0.66 kW x 2) Profile scraper unit 08.519 Flat scraper unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612 Free position (for grooving/rabbetting unit)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms Nedpfxsfi Tg Hj Adyswb External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: kot nova (razstavni stroj), SINGLE-SIDED EDGE BANDER (LEFT) Edge thickness on rolls (min/max) mm 0.3 / 3 – in lippings/strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Pressure belt driven by V-belt Spray unit (for liquid non-stick) Adjustable fence, CNC controlled Panel feeding system 700.101 (mm 500 x 500) Jointing milling unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo-motor), adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments No.) 6 Linear end trimming unit 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Nwjdpfx Ajgbug Njdyeb Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with consoles. No. 6 consoles (1400 mm) Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool change system Rotary changer – magazine with 18 tool slots Maximum working area (X – Y – Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X – Y – Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X – Y – Z): 4250 x 2200 x 60 mm Chip conveyor Separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (TOP): Vertical main spindle (milling unit) HSK F63 – power: 14.5 kW (S6) / 7.5 kW (S1) Nedpsvxhnusfx Adyjwb No. 3 grippers for clamping and moving the panels onto the machine’s vacuum cups No. 5 air tables for staging panels before processing Vacuum system with program-controlled suction for lifting panels onto the conveyor belt Panel discharge system with motorized conveyors

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: A) W06027 1st double-sided sizing and edge banding machine "IMA" Combima II /440 /A /R3 Nodpfeun N Dlsx Adyowb B) Rotation unit (90°) C) W06028 2nd double-sided sizing and edge banding machine "IMA" Combima II /190 /B /R3