Ima C 21 nakup rabljenega (122)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Carton width range: 28mm-92mm, carton height range: 14mm-60mm, carton length range: 55mm-190mm, max. total cross-section (width + height): 140mm, packaging output: 120 cartons/min, machine dimensions X/Y/Z: approx. 2550mm/1250mm/1800mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Tsdsv Suhbjpfx Abgef

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 7200 kg Glavni pogon Območje hitrosti vretena: 15.000 vrt/min Vrsta vpenjanja orodja: HSK F63 Todpfxowwblce Abgof Pomiki Pomik osi X: 4.200 mm Pomik osi Y: 1.200 mm Orodja Največja teža orodja: 6 kg Največji premer orodja: 100 mm Največja dolžina orodja: 150 mm Ta stroj IMA BIMA CUT 120/240 je bil izdelan leta 2003. Gre za CNC-obdelovalni center za les z obdelovalnim območjem X: 4.200 mm, Y: 1.200 mm in največjo višino vpenjanja 100 mm. Stroj vključuje glavno vreteno z vpenjalom HSK F63 in močjo pogona 7,5 kW. Poleg tega ima stroj menjalnik orodij z 18 mesti ter omogoča različne operacije vrtanja in rezkanja. Za dodatne informacije o stroju nas kontaktirajte. Vrsta uporabe CNC obdelava lesa

Leto izdelave: 1955, Stanje: rabljeno, used Manufacturer: IMA Model: B55 Year of manufacture: 1955 Machine No.: 0/650 Press cylinders: pneumatic, 4 units Table size: 2900 x 1300 mm Working height: 750 mm Tsdpfxjvwf Sze Abgjf Max. material thickness: approx. 200 mm Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition Without warranty or guarantee

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 08420, skupna dolžina: 11.500 mm, največja debelina roba: 3 mm, skupna masa: 8.500 kg, priključek za stisnjen zrak: 7 letvica, Used single-sided IMA edge banding machine for straight edges, for jointing, edge banding, and post-processing of various edge materials. Fixed fence on the right side. Workpiece and Material Dimensions: - Min. workpiece length: 150 mm - Min. workpiece width: 65 mm - Min. workpiece thickness: 8 mm - Max. workpiece thickness: 40 mm (with corner rounding / copying) - Max. workpiece thickness: 60 mm (without corner rounding / copying) - Smallest workpiece: 150 x 150 mm or 300 x 65 mm - Workpiece overhang: 38 mm - Edge thickness min/max: 0.3 – 3.0 mm - Edge width min/max: 14 – 65 mm EQUIPMENT / SPECIFICATION - Base machine - Workpiece transport with 80 mm wide feed chain (chain plate width) - Feed speed 6 to 30 m/min, steplessly adjustable via input unit - Upper pressure with spring-loaded guide rollers and 70 mm wide composite timing belts - Automatic height adjustment (workpiece thickness) - Workpiece support with roller rails, extendable up to approx. 600 mm - IMA 63.152 infeed table, 500 x 500 mm, for safe and precise feeding of long and narrow parts - Manual infeed device, can be raised/swiveled, with 5 driven, inclined rollers from above - Adjustable infeed fence with NC axis UNITS / EQUIPMENT - Jointing Unit IMA 08.378, 2 motors each 4.5 kW, with engagement control, tool Ø 125 mm, electronic horizontal positioning - Gluing section 04.1570 Concept, driven glue roller with automatic stop in case of malfunction, quick-lock system for glue application unit, glue roller lift-off when feed stops, edge feed monitoring via fiber optics, pressure device with stepper motor adjustment Tedpfxswyp Nuj Abgjf - Automatic PUR melting system IMA 283.203 - Edge magazine with automatic 6-roll changer POST-PROCESSING SECTION: - End trimming unit IMA 08.42, horizontal working movement, 2 motors each 0.65 kW, 200 Hz, for straight and chamfered trimming, max. working speed 30 m/min - Fine milling unit IMA 08.055, 0.66 kW 400V 200Hz, top/bottom, HSK 25 - Corner rounding (copying IMA) 08.348, 2 motors 0.66 kW 400V 200Hz, HSK 25, max. working speed 20 m/min - Profile (radius) scraper 08.516, top/bottom, for multiple profile tools, automatic positioning via stepper motors, max. 4 profiles, electro-pneumatic engagement/disengagement - Spray device for cleaning agent - Flat scraper 08.521 (glue joint), top/bottom - Profile (corner) buffing unit 08.604, 4 motors - Buffing unit 08.617, top/bottom CONTROL / SOFTWARE: • Control system ICOS Open Compact • Edge tracking control • Uninterruptible power supply (UPS) • Power supply 400 V, 50/60 Hz, control voltage 24 VDC / 230 VAC Machine dimensions: L 1150 x W 300 x H 260 cm Availability: approx. October 2025

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Year of manufacture: 2009 Manufacturer: IMA Technical condition: Good, regularly serviced. Pre-milling cutters: New, installed about a month ago, diamond-tipped. Tedpjrur Urjfx Abgsf Flat scrapers: Replaced with an upgraded version, as visible in the attached photos. Technical documentation: Available as a PDF file upon request. Additional information: The machine operates efficiently thanks to the recently installed pre-milling cutters, which have been in use for approximately one month. The flat scrapers have also been upgraded to a better version, which can be clearly seen in the attached photos. Please feel free to contact us by phone for further information or to arrange an inspection of the machine. The technical documentation in PDF format is also available to provide full transparency regarding the machine’s specifications and operation.

Stanje: dober (rabljeno), IMA LED assembly aid Used, in fully functional condition. Approx. 60 LEDs Tjdpfsbxx Iujx Abgof 15-pin serial connector on both sides Dimensions: 18 x 56.7 x 312 mm, including 10 mm for the connectors Direct purchase available in our online shop on our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, A complete can feeding, counting, and closing line including labeling and cartoning is available. 1) Can Feeder IMA Swiftpack UN 800S, year of manufacture: 2007, output: 60 cans/min, formats (diameter/height): 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting Machine Cremer CF 1220, year of manufacture: 2002, counting speed: 1000 products/min, counting heads: 1, channels: 12, formats: capsules (HGK & WGK) and tablets (round & oblong), including one spare cylinder for storage flaps. 3) 2x Rotary Tables Höflinger & Karg S1, table diameter: 1000mm. 4) Cap Closing Machine (Screw Capper) CBV Servo, year of manufacture: 2019, closing speed: 40 closures/min, cap diameter range: 23mm-100mm. 5) Cap Closing Machine (Crimp Capper) Rudolf Deckert AVM 738, year of manufacture: 2003, closing speed: 50 cans/min, can diameters: 45mm/60mm, cap formats (diameter/height): 42.4mm/17.15mm, 50mm/12mm. 6) Can and Bottle Labeler IMA Sensitive 350, year of manufacture: 2009, labeling capacity: 350 units/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot printer Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and Bottle Cartoner Uhlmann C100, year of manufacture: 1988, cartoning speed: 70 cans/min, max. can/bottle diameter and height: 60mm/120mm, carton length range: 30mm-113mm, carton width range: 15mm-85mm, carton height range: 70mm-130mm. The machine was converted in 2017 for cans and bottles and equipped with a Mitsubishi D700-SC control, including GUK Cartonac 91 folding unit, 3x code readers and luminescence control. 8) Coding and Inspection System Wipotec TQS-HC-A for serialization, tamper evident, and weighing, year of manufacture: 2017, inspection speed: 300 products/min, including 2x label dispensers Herma 400, double print head (2 cartridges), camera for print inspection, weighing cell with weigh belt, and hand scanner. 9) Bundler (Tight Bundler) Christ FilmTeq 3030, year of manufacture: 2011, infeed: 50-200 cartons/min, outfeed: 7-50 bundles/min, carton length range: 15mm-400mm, carton width range: 15mm-90mm, carton height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, band height range: 30mm-230mm. Documentation available. An on-site inspection is possible. Tjdpowa Tixjfx Abgjf

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Tedswttw Nspfx Abgsf Teža stroja: 6200 kg Premiki Pomik po osi X: 3000 mm Pomik po osi Y: 1200 mm Orodja Največja teža orodja: 6 kg Največji premer orodja: 100 mm Dodatna oprema Avtomatsko centralno mazanje Volavtomatska nastavitvena miza Varnostne protizdrsne preproge IMAWOP 6.0 Sesalna traversa pri izhodu za avtomatski transport izmeta Pogonski transportni trak za transport izmeta Ta stroj IMA BIMA CUT 120/300 je bil izdelan leta 2008. Opremljen je z 4-osno rezkarsko glavo z močjo 7,5 kW in hitrostjo med 8000 in 24000 vrt/min. Doponjuje ga 18-kratni avtomatski menjalnik orodja. Stroj vključuje vakuumsko črpalko 100 m³/h ter pogonski transportni trak za učinkovito odstranjevanje obdelovancev. Izkoristite priložnost za nakup CNC obdelovalnega centra IMA BIMA CUT 120/300. Za več informacij o tem stroju nas kontaktirajte. Vrste uporabe CNC obdelava lesa

Stanje: rabljeno, Glue application unit, gluing unit, gluing head, heated glue pot for edge bander, edge banding machine - Electrically heated - 7 heating rods each with 800 WATT - Refurbished by FavFE-MA-TECH - 2x glue pots available Todpfob A S N Rjx Abgsf - Price: per unit - Dimensions: 190/100/H125 mm - Weight: 3 kg/unit

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Ηλεκτρονικά ελεγχόμενο κέντρο κατεργασίας CNC με: • Τυπικό τραπέζι • Χαλιά ασφαλείας • 1 αντλία κενού 100 m³/ώρα • IMATRONIC-NT • Πλευρικό πλέγμα ασφαλείας δεξιά • Με πόρτα και μπροστινό αριστερά • Φορητή κονσόλα για τη ρύθμιση πείρων και βιδών συγκράτησης Τεχνικά χαρακτηριστικά: • Περιοχή κατεργασίας με τυπικές μονάδες X/Y 6000/1200mm • Μέγιστο ύψος σφιγκτήρα από την άνω επιφάνεια της πλάκας κενού Z1: 100mm • Μέγιστο πάχος πάνελ Z2: ανάλογα με τη χρήση • Ύψος τραπεζιού εργασίας: περ. 1000mm • Εναλλακτική περιοχή πεδίου χωρίς κυκλικό κύκλο X: 2 x 2650mm Ελεύθερος χώρος στο κέντρο X: 700mm • Με επεξεργασία σε κύκλο X: 2 x 2250mm Ελεύθερος χώρος στο κέντρο X: 1500mm • Κεντρική λίπανση • Τροφοδοσία ρεύματος: 3/N/PE, 400/230 V • Λογισμικό IMAwinCAD για μηχανές BIMA, συμπεριλαμβανομένης συγκόλλησης ακμών • IMAWOP • Κύρια άτρακτος HSK F63/διάμετρος κώνου 38mm/12kW/υδρόψυκτη • 1 μονάδα οπής πριονιού • 1 μονάδα πριονιού αυλακώματος Tjdpfx Ajwyvfcebgef • Συγκόλληση ακμής VT 61

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Single-sided edge banding machine for narrow edges IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20 with MFA servo unit for corner copying Year of manufacture: 2009 Technical condition: very good - Stable machine frame, onto which individual machining units are mounted. - Feed drive with electronically adjustable feed speed range from 6–30 m/min (machining unit operating speeds are not synchronized with the full range of feed adjustment). - Feed chain guided in low-friction guides with plastic pads and 80 mm wide rubber covering. - Automatic feed chain lubrication controlled by the machine program. Todsw R S Slepfx Abgjf - Upper pressure beam made from a double V-belt, 70 mm wide, guided on ball bearing-supported rollers; pressure beam is electronically adjustable. - Safety guards corresponding to CE certification. - Soundproofing and protective enclosures. - Edging unit with drive installed in a fully enclosed oil bath with glue pot (1 main powered pressure roller + 5 auxiliary rollers); pneumatic Quick-Lock glue pot fast-change system. - Touch-screen display. - End trimming unit for cutting off edge overhang at front and rear corners, with features including: pneumatic saw tilting 0–25°, straight and chamfer cutting, automatic saw positioning for corner chamfering for two different edge thicknesses (e.g. 0.4 and 1.2 mm) and adjustment of edge overhang cutting for corner copying. - All machining units equipped with chip extraction. - Novimat Contour series edge banders ensure very high processing quality due to the powerful corner copying unit and small gap between workpieces (~300 mm). Key technical data: - Edge material from roll thickness: from 0.3 to 3 mm - Paper, PVC and ABS edges: 0.3–3.0 mm - Veneer: 0.5–3.0 mm - Solid wood strips: 0.8–20 mm - Edge height: 14–65 mm - Maximum top edge overhang: • for edge thickness up to 8 mm – 5 mm • above 8 mm – 2 mm Workpiece dimensions: - Minimum workpiece length in feed direction: 150 mm - Minimum workpiece width (for up to 25 mm thick elements): 65 mm - Minimum workpiece thickness: 8 mm (without flat scraper) or 12 mm (with flat scraper) - Maximum workpiece thickness: • without corner copying: max 60 mm • with corner copying: max 40 mm - Smallest element: 150 × 150 mm or 65 × 300 mm (note: * 65 mm width at maximum workpiece thickness of 25 mm) Machine technical parameters: - Workpiece feed speed electronically adjustable: 6–30 m/min (note: feed speed may be limited by specific units on the machine) - Workpiece overhang beyond feed chain: • 38 mm (with edge thickness 0.3–8 mm) • 30 mm (with edge thickness 8.1–20 mm) Electrical supply: - Voltage: 400/230 V, +5/–10 % with neutral - Frequency: 50 Hz - Control voltage: 230 V AC / 24 V - Compressed air: 8 bar - Extraction air speed: 28 m/s

Leto izdelave: 2001, Stanje: dober (rabljeno), IMA gluing unit Spare part for e.g. IMA 680 / 480 / 980 Edge banding unit for 4-sided edging and all-round bonding on butt joints with: - Main pressure roller, diameter 100 mm, and pneumatically controlled secondary pressure roller, diameter 35 mm - Glue application for coating the edge material, with temperature and level control - Servo drive for edge feed with automatic adjustment to feed speed - Hot air post-activation unit 7.5 kW, on the glue side - IR emitter 600 watt on the decorative side for preventing material deformation on small radii - Pneumatically driven cross-cut saw - Butt joint detection - NC axis Rotation range up to 740 degrees, pneumatic Z-stroke 125 mm - Separate NC axis in Y (in portal applications X) operating independently from the main axis Part year: 2001, taken from IMA 680 V No. 2216 Scope of delivery as shown Please check if this part can be installed in your machine. No returns possible. The unit was in production use for approx. 2 years and is in good condition. Technical data subject to change. Tedpebxx Ikefx Abgsf

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Edge banding machine Manufacturer: IMA Model: Quadromat 3512 U Year of manufacture: 1999 Edge material: veneer rolls and strips, plastic, solid wood lippings Edge height: 14–50 mm Tsdsv T R Erjpfx Abgef Edge thickness: 0.4–12 mm Speed: 18,000 rpm End trimming unit Milling units Profile scraping knives Buffing unit Flat scraping knives

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Dieser IMA Advantage 310 Kantenanleimer wurde 2010 hergestellt. Er verarbeitet Werkstücke ab 150 mm Länge und 65 mm Breite bei Materialstärken bis zu 60 mm. Die Maschine ist für verschiedene Materialien wie Spanplatten und MDF geeignet und kann Kanten aus Melamin, Papier, Folie oder Echtholz-Furnier anbringen. Ausgestattet ist sie unter anderem mit einer Leimstation, einer Endabschneideeinheit und einer Poliereinheit, was die Bearbeitungsqualität erheblich verbessert. Nutzen Sie die Gelegenheit, diesen IMA Advantage 310 Kantenanleimer zu erwerben. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Anwendungsbereiche Kantenanleimen Todpswtiu Defx Abgef

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Skoraj popolna etiketirna naprava IMA AP400. Dobro ohranjena, malo rabljena. Model AP400 omogoča preverjanje in izločanje nepravilnih etiket ter je mogoče upravljati in nadzorovati preko HMI vmesnika. Stroj je na voljo za takojšen nakup. Tedpfx Absv Up Eaegjf

Leto izdelave: 1991, obratovalne ure: 13 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Corazza/IMA MD120 portioneer verpakkingsmachine. Tjdjwfn Adepfx Abgef Machine voor het doseren en verpakken van miniporties boter en bouillonblokjes in rechthoekige verpakkingen. - Capaciteit: 5.400 stuks/uur tot 7.200 stuks/uur - Huidige verpakkingsmaat: 31x23x11 mm --> Omstelling naar andere formaat mogelijk - Bouwjaar: 1991 - Fabrieksrevisie door IMA in 2016. Slechts 13 draaiuren sinds de revisie. - Papierinvoer en positionering gestuurd via fotocel - Boter aanvoer via roestvrijstalen trechter met roestvrijstalen vijzel - Volledig afgeschermd met Lexan deuren en ramen (volgens EC-richtlijnen) - Inclusief documentatie en EC-conformiteitsverklaring - Volledig automatische stapel- en verzamelunit in meervoudige lagen mogelijk als optie - Deze machine is in wezen vergelijkbaar met de Benhil 8304 Zo goed als nieuw Neem contact met ons op voor meer informatie. De machine is op afspraak te bezichtigen.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, 4-Axis Machining Center IMA BIMA 300 Year of Manufacture: 2009 Technical Condition: Very Good Technical Data: - Working table: 4,300 × 1,250 mm - 8 consoles (24 suction cups) - Main spindle: 7.5 kW (max. 11 kW), 1,500–18,000 rpm - Tool magazine: 18 positions - IMA 14 drilling unit - Tool set Tsdpfjw R S Dnsx Abgsf - 2 × vacuum pump 90 m³/h - Safety mats – alternating mode operation - IMAWOP software on machine + 1 office license - Emergency computer power supply - Control cabinet air conditioner - Main spindle unit for horizontal drilling - Max. feed rates: X 60 m/min, Y 60 m/min, Z 30 m/min - Dust extraction: as per connection diagram; air velocity v = 28 m/s; central port Ø 250 mm - Weight: approx. 5,500 kg - Compressed air: ¾" connection, 6 bar; dry operation (dryer recommended if the system does not comply) - Electrical installation: main switch in separate control cabinet; operated from separate control panel; complete electrical cabinet with monitoring; all safety features comply with CE; typical cabinet dimensions (H/W/D) approx. 2000×1200×800 mm; power supply 400/230 V, 50 Hz - Environmental conditions: permissible ambient temp. +15…+35 °C (without cabinet air conditioner) - CNC control - Controller: ICOS OPEN 321 (PL language version) - Interpolation: linear simultaneous for 3 axes; circular 2½D for two axes in any of the three planes - Selected IMAWOP functions: operation selection (drilling, milling, grooving); graphics update after corrections; drilling time optimization; graphical cup positioning; conditional/formula programming; technology and tool databases; alphanumeric names/descriptions (up to 28 characters); subprograms; manual entry of machining sequence; disturbance messages; acceleration/braking adjustment (accuracy to 0.001 mm); automatic referencing; corrections from portable panel Additionally: IMAWOP machining program

Stanje: dober (rabljeno), Leto izdelave: 2001, Hand-held edge banding machine IMA HKA form part edge banding machine The hand-held edge banding machine IMA HKA is a versatile device for the manual attachment of edge bands or veneer strips to panel-shaped workpieces. It is suitable for materials such as chipboard, blockboard, and MDF. The device can be used both manually or in combination with a processing table, offering a high degree of flexibility in application. Year of manufacture: 2001. If you require vacuum clamps, you can purchase them new or used in our shop. Tjdpsv N Nn Dsfx Abgsf The HKA consists of two main components: 1. Hand unit: This automatically feeds the edge strip, applies glue, and presses it onto the workpiece. 2. Processing table: Includes a vacuum pump, a temperature controller, and various control elements. The hand unit can be suspended from a cable pull to facilitate handling. Operation: • Guided workpiece: The hand unit is fixed to the processing table and the workpiece is moved manually. • Guided hand unit: The workpiece is fixed with vacuum suction cups while the hand unit is guided manually. Technical data: • Working width: 90 mm • Edge thickness: 0.4 - 3 mm • Panel thickness: 16 - 45 mm • Strip feed: 20 - 50 mm • Power consumption: 2.6 kW • Vacuum pump: 6 m³/h • Minimum external radius: Depending on the bending suitability of the edge material • Minimum internal radius: 150 mm, depending on the material properties Optional equipment: • Gantry for attaching a spring balancer • Vacuum clamping table

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: L3B031, IMA MISTRAL Y 16 Bottle/Can Air Rinsing Machine – Used, Immediately Available Machine Data: Model: IMA MISTRAL Y 16 Type: Automatic Bottle/Can Air Rinsing and Extraction Machine Serial Number: L3B031 Year of Manufacture: 2011/2012 Manufacturer: IMA S.p.A. / IMA Swiftpack (Italy) Electrical Specifications: 220/380 V, 3-phase, 50 Hz Footprint: approx. 400 × 140 × 220 cm Tedpfx Asw Sfa Esbgsf Description & Features: The rotary air rinsing machine is designed for pharmaceutical and medical applications and is suitable for GMP-compliant internal cleaning of stable, round glass or plastic bottles using sterile compressed air. - Fully automatic bottle cleaning and extraction - Processes up to 200 containers/minute - Includes change parts for plastic bottles Ø 44 mm × height 95 mm - Additional formats included: Ø 40 × 55 mm, Ø 60 × 130 mm Operating Principle: Bottles are singled with an infeed conveyor and screw, transferred into a carousel, picked up by grippers, rotated 180°, and cleaned using nozzles (blowing out) and extraction heads (vacuuming). Afterwards, bottles are transferred to the outfeed conveyor and the downstream machine. - Suitable for bottles and cans made of plastic and glass - High degree of automation, GMP-compliant design Documentation & Records: - Operating manuals (German, English, Italian) - Electrical schematics - Layout drawings / Guards layout - Spare parts catalogue - Blowing diagram / Electric diagram - FAT and SAT documentation - Machine and operating manual in German Scope of Delivery: - Complete machine - Spare parts as per catalogue - All original documentation (PDFs and printed copies) - Change parts for various bottle sizes Condition: - Used, from pharmaceutical production - Ready for immediate operation after installation - Immediately available Location: Çorlu, Turkey Price: On request

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Tabela Zunanja dolžina 500 mm Tsdpswpmdzofx Abgef Zunanja širina 500 mm Dodatna oprema Enota za profilno rezkanje: 2 motorja, vsak po 4,0 kW, 8800 vrt/min Grelec: Predgreje robove obdelovanca do 60 mm Lepljenje: Obdeluje robove do 3 mm Enota za končno obrezovanje: 2 motorja, 660 kW Dodatne enote: Rezkanje, večprofilno rezkanje, konturno rezkanje, večprofilna strgala in strgalne enote; polirna enota Samodejni podajalnik topega lepila Quickmelt Sistem vračanja plošč z motoriziranimi valjčnimi transporterji, prečnim transporterjem, transportnim trakom, kotnim prenosom, zračnimi blazinami in varnostno ograjo Ta robna lepilka IMA Novimat Concept / I / G80 / 440 / R3 je bila izdelana leta 2012. Odlikuje jo robusten avtomatski sistem za lepljenje robov in kasnejšo obdelavo, vključno s sistemom za vračanje obdelovancev za povečano produktivnost. Stroj je sposoben obdelovati robne trakove debeline od 0,3 mm do 3 mm ter obdelovance debeline do 60 mm. Opremljen je s pnevmatskim sistemom za hitro zaklepanje in elektronskim nadzorom temperature za natančen nanos lepila. Izkoristite priložnost za nakup robne lepilke IMA Novimat Concept / I / G80 / 440 / R3. Za več informacij nas kontaktirajte. Vrste uporabe Lepljenje robov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, največja debelina roba: 20 mm, model krmilnika: IMATRONIC 121/01, TEHNIČNI PODATKI Debelina robnega traku (v roli): 0,3 – 3 mm Debelina robnega traku (v trakovih/kosih): 0,8 – 20 mm Debelina plošče: 8 – 60 mm Motoriziran spodnji verižni podajalnik (spremenljiv): 6 – 30 m/min PODROBNOSTI STROJA Elektronski krmilnik: IMATRONIC 121/01 OPREMA Ravnalna enota z NC nastavitvijo 08.376: (4,5 kW × 2 pri 9.000 min⁻¹) Grelniki robov: 1,5 kW × 2 Lepilna enota 283.1513: (talilno lepilo + predgrelna enota) z NC nastavitvijo Lepilna enota 08.42: (0,66 kW × 2 pri 12.000 min⁻¹) Profilirna skupina 08.0555: (1,85 kW × 2 pri 12.000 min⁻¹) Multifunkcijska enota 08.348: (0,66 kW × 2 pri 12.000 min⁻¹) Kopirni rezkar 08.519 Skupina za strganje lepila 08.50 Tjdexf Ewvspfx Abgef Krtačna enota 08.612: (0,25 kW × 2 pri 1.500 min⁻¹) Enota 08.181: (4,4 kW × 1 pri 6.000 min⁻¹) Enota s pasom za brušenje 08.062: (1,8 kW × 1 pri 3.000 min⁻¹) Zgornji pritiskalni sistem z motornim gumijastim trakom Vhodni prislon z NC nastavitvijo Pritisni cona Nosilec za rolo z 1 rolo Avtomatska menjava kopirnega rezkalnega orodja (prečni sistem)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 22.000 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 4.670 mm, skupna višina: 1.690 mm, skupna širina: 1.370 mm, vhodna napetost: 400 V, skupna masa: 1.400 kg, priključek za stisnjen zrak: 6 letvica, potreba po zraku: 0,2 m³/h, - 설치일: 2021년 4월 - 사용 종료일: 2023년 11월 (약 2년 7개월 사용) - 2023년 12월부터 비닐 래핑하여 보관 Ilapak의 Delta 3000 수평 플로우랩 포장기는 PC 제어 방식에, 변형 대기 포장(MAP, Modified Atmosphere Packaging)과 Ilapak만의 고속 방습 밀봉 기술(Long Dwell Technology)이 적용되어 광범위한 어플리케이션에 대응할 수 있습니다. 견고하고 신뢰성 높은 설계로 Delta 3000 포장기는 자동 포장 시스템에 통합 설치가 가능합니다. 모든 Delta 3000 수평 플로우랩 기계는 스테인리스 스틸 및 하단 필름 공급 방식도 제공됩니다. 신선 제품의 유통기한을 연장하는 가장 효과적인 방법 중 하나는 변형 대기 포장(MAP)과 함께 완전밀봉(Hermetic Sealing)으로 포장하는 것입니다. 당사의 견고한 Delta 플로우랩 기계는 고속에서도 완전밀봉이 가능하도록 정밀하게 설계되었습니다. Delta 시리즈 포장기는 설계가 유연해 식품 이외의 의료용, 위생용(예: 물티슈 등)과 같은 완전밀봉이 필요한 비식품 제품에도 이상적입니다. * 주요 특징 - 업그레이드 가능한 기계 구성 - 롱 듀웰(Long Dwell) 씰링 조 기술 적용 - 전기 제어부 분리 구성 - 상용 전자부품 사용의 전자식 기계 * 장점 - 다양한 이송 시스템과 연동 및 확장 가능 - 다양한 포장재 특성에 맞춰 밀봉 및 MAP(변형 대기 포장) 수행 가능 Tsdpfot Dg Itex Abgef - 유지보수 시 뛰어난 접근성 - 높은 신뢰성의 부품 사용 - 유지보수 용이 * 기술 사양 - 처리속도: 25 ~ 100 CPM (4~1라인 적재 기준) - 변형 대기 제어: N₂/CO₂ 혼합기 및 O₂ 분석기 포함 - 크기: 4,666mm(길이) x 1,367mm(폭) x 1,689mm(높이) (이송라인 포함) - 전원 사양: 3상, 400V, 50Hz, 7kVA - 에어 사양: 6bar, 0.2m³/h - 기계 속도: 분당 최대 100사이클 (생산성은 필름 밀봉력 및 제품 특성에 따라 상이) - 필름 컷오프: 최소 100mm(4.0”) ~ 최대 1,200mm(47”) (필름 및 제품 특성에 따라 상이) - 필름 롤 최대 중량: 필름 롤 폭에 따라 최대 75kg(165lbs) - 전자 플랫폼: 산업용 PC