Ima C 21 nakup rabljenega (126)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINES – First (1st) machine in line Edge thickness from coil (min/max) mm Edge thickness in strips (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/software ICOS open Feed speed (adjustable) m/min 9 - 45 No transfer bar (master & slave systems) Pressure belt driven by V-belt FORMATTING UNIT (for each side): Jointing/milling unit 75.30 (kW 6.6 x 1) EDGE-BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1569 + 283.205 Pressure rollers (turret) for straight and softforming edges mm 1,050 Edge magazine for coils (number of slots) 6 End trimming unit 08.42 (kW 0.2 x 2) 40 m/min Pre-milling unit 08.055 (kW 0.66 x 2) 0°-30° Milling unit 08.0582 (kW 0.66 x 2) 0°-30° Scraper unit 08.50 Buffing unit 08.617-2 (kW 0.18 x 2) Tedpofi Tkgefx Abgsf

Stanje: rabljeno, Leto izdelave: 2006, IMA Novimat Edge Banding Machine: Manufacturer: IMA Model: Novimat Concept/I/G/80/650/R3 Year of manufacture: 2006 Machine No.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Fence ruler: Adjustable fence ruler 700.080 Infeed table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application station: 04.0832 Bonding unit: 04.1570 PU pre-melter: 283.203 High-speed tool holder: For high-speed motors Cut-off unit: 08.42 Milling unit: 08.0555 Multi-processing unit: 08.348 Multi-profile scraping blade device: 08.516 Flat scraper: 08.517 Corner copying buffing unit: 08.604 Buffing unit: 08.617-4 Safety features: Light barriers, temperature controller, control terminal Additional equipment: Upstream roller conveyor table Total machine length: approx. 11/16 m Extraction system: Included Accessories: Edge magazines: 2 sliding magazines for edge rolls, each holding 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Control cabinet Panel return system (Manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, varying table lengths Round belt conveyor table Control cabinet system 2 angle transfer tables Todpjrnkw Djfx Abgsf Peripheral equipment for edge processing line: Consisting of: Interface system Barcode scanning system

Stanje: dober (rabljeno), Leto izdelave: 2014,

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Todpjd Scydofx Abgef Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control unit: ICOS Open Feed speed m/min (adjustable): 16 - 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable stop ruler, CNC controlled Jointing unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) VTG + 283.203 Edge magazine for rolls (number of compartments): 6 End trimming unit 08.42/30/B (Kw 0.2 x 2) max 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2), 4 profiles Multifunctional unit (radius and contour milling) KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 08.190 (Kw 4.5 x 1) 90°/180°/270° CNC

Stanje: rabljeno, Complete factory for furniture production, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (mm 5700x2700) with stacking system "SIRIO" SZ0M25) Panel saw "GIBEN" Mod. GammaDue (mm 3800x2200) SZ0M26) Panel saw (multi-blade saw) "GABBIANI" (finished panels mm 4250 x 2120) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (film lamination/glue on paper) SZ0M29) Press line "COLOMBO REMO" (mm 1400x9600) for paper/veneer/laminated materials SZ0M30) Press line "FRIZ" (mm 1400x6200) for paper/veneer/laminated materials SZ0M41) Double-sided edge banding and sizing line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided edge banding and sizing line "IMA" Combima Softforming with a second double-sided edge banding and sizing machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with splitter "NARDELLO" Mod. Elegance SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed system and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and winding machine "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cross-cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Pre-assembly line for honeycomb panels SZ0M18) No. 6 multi-opening press "COLOMBO REMO" (mm??x mm??) SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI+ELMAG+ COSTA LEVIGATRICI" Many other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, racks (wall-mounted shelving), forklifts, pallet trucks, and more. Tjdpfx Aecr U Urobgof The machines are still installed at the user’s site and can be inspected by appointment.

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING MACHINE Tsdpfod Rcigsx Abgjf Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable) 6 - 30 No transmission bar (Master & Slave systems) Top pressure driven by V-belt Sprayer unit (for liquid anti-stick agent) Jointing milling unit 08.376 (4.5 kW x2) Free position Glue application unit (hot melt glue) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 2 End trimming unit 08.42 (0.66 kW x 2) 0°-25° Milling unit 08.055 (1 kW x 2) 0°-30° Multifunctional unit (radius and profile milling unit) 08.342 (0.66 kW x 2) Profile scraper unit 08.519 Flat scraper unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612 Free position (for grooving/rabbetting unit)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Todpfx Aofi Tg Hsbgjf Total connected load kW 30

Stanje: zelo dobro (rabljeno), Zum Aufbringen von Kantenbändern auf gerade, runde und profilierte Werkstücke - Manuelle Zuführung der Werkstücke - Mit Leimbecken und Leimauftragswalze - Mit Rollen-/Spulenhalte-Tisch Todpfx Ajhgbfasbgef - Min./Max. Werkstückdicke: 16 / 40 mm - Kantenstärkenbereich: 0,4 bis 3 mm - Schwenkbarer Tisch 0°-45° - Gesamtanschlussleistung ca. 4 kW

Stanje: zelo dobro (rabljeno), CNC MACHINING CENTER (POINT-TO-POINT) – 5 Axes (ROBOT head) Gantry design construction Control: ICOS CNC – Software: IMAWOP / (OPTION IMAwinCAD) Safety cabin for machining head Clamping table with 8 consoles LED positioning system on the X-axis for console positioning and on the Y-axis for vacuum clamp positioning Automatic tool change system 2 disk-type tool changers – Magazine/tool stations (8 each) + TC8 (18 stations) Maximum working area (X-Y-Z): 4300 mm x 1300 mm (1410 mm) x 350 mm 2 working zones – Vacuum pump (capacity in m³/h): 140 Separate electrical and control cabinet. Total power connected (kW): 23 WORKING UNITS (TOP): 21 independent vertical drilling spindles 4 independent horizontal drilling spindles (drilling head motor power: 1.2 kW x 4) 1 grooving unit, 125 mm diameter, swivels 90° in X-Y direction 1 vertical main spindle (milling unit), robot head (HSK F63) Tedpfsfin Sasx Abgsf Vertical main spindle power (kW): 9 Independent Z-axis travel: 650 mm A-axis arranged/mounted at a 90° angle to the C-axis C-axis rotation range: 420°, A-axis rotation range: 140°

Stanje: zelo dobro (rabljeno), One-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips/lippings (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control ICOS open TS Feed speed m/min (adjustable) 4 - 20 Upper pressure with V-belt drive Sprayer unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Gluing unit (Hot Melt glue) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 Todpfxeflc Uhe Abgof End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-functional unit (radius milling and contour milling unit) 08.342 (2 x 0.66 kW) Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Stanje: kot nova (razstavni stroj), SINGLE-SIDED EDGE BANDER (LEFT) Edge thickness on rolls (min/max) mm 0.3 / 3 – in lippings/strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Pressure belt driven by V-belt Spray unit (for liquid non-stick) Adjustable fence, CNC controlled Panel feeding system 700.101 (mm 500 x 500) Jointing milling unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo-motor), adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments No.) 6 Linear end trimming unit 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Tsdpegbug Nofx Abgsf Spray unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining centre for milling, drilling, cutting, and edgebanding Control: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area for edgebanding (X - Y - Z) mm: 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) - 1200 mm LED setup assistance for vacuum cup (sleeve) positioning (Y-axis) 1 vacuum pump (capacity 140 m³/h) Safety enclosure for working head, safety foot mats Chip conveyor No. 2 vertical main spindles (milling units), HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (disc changer) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit – gluing module (hot melt glue) VT 50 Tsdpfefbmqtox Abgsf Edge magazine for rolls (6 compartments) OPTIONAL: 1 adapter unit for saw, fixed 90 degrees, max diameter 200 mm 1 adapter unit for flush milling and profile pull blade 1 adapter unit horizontal drilling & milling head (cross head) with 4 horizontal spindles

Stanje: zelo dobro (rabljeno), Single-sided edge banding machine (LEFT) Edge thickness (tape, min/max) mm: 0.3 - 3 Edge thickness (solid strips min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: Driven by V-belt Sprayer unit (for liquid non-stick agent) Jointing milling unit 08.376 (2 x 3 kW) Tjdsd Nuu Hepfx Abgsf Gluing unit (hot melt adhesive) 283.1513 Pressure zone for edging Edge magazine for tape (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and profile milling) 08.342 (2 x 0.66 kW) servo-controlled Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for discharge of the panel stack from the unloader No. 1 external motorized roller conveyor at the stacking section Separate electrical control panel Perimeter safety fencing Tjdpewbp Nwjfx Abgjf Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load: 80 kW

Stanje: zelo dobro (rabljeno), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with consoles. No. 6 consoles (1400 mm) Automatic positioning of the consoles (X-axis) Tsdevxhnuepfx Abgjf Automatic positioning of the vacuum clamps (Y-axis) Automatic tool change system Rotary changer – magazine with 18 tool slots Maximum working area (X – Y – Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X – Y – Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X – Y – Z): 4250 x 2200 x 60 mm Chip conveyor Separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (TOP): Vertical main spindle (milling unit) HSK F63 – power: 14.5 kW (S6) / 7.5 kW (S1) No. 3 grippers for clamping and moving the panels onto the machine’s vacuum cups No. 5 air tables for staging panels before processing Vacuum system with program-controlled suction for lifting panels onto the conveyor belt Panel discharge system with motorized conveyors

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: Tedpfx Aeun N Dlobgef A) W06027 1st double-sided sizing and edge banding machine "IMA" Combima II /440 /A /R3 B) Rotation unit (90°) C) W06028 2nd double-sided sizing and edge banding machine "IMA" Combima II /190 /B /R3

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Tsdpjidqphjfx Abgsf Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: toothed belt driven Adjustable fence: CNC controlled Jointing unit with CNC-controlled 08.376 (kW 4.5 x 2) Lamps for workpiece edge heating Edging station (Hot Melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartment No.): 1 End trimming unit 08.42 (kW 0.66 x 2), max 30 m/min, 0°-25° Milling unit 08.055 (kW 1.85 x 2) 0°-30° Spray unit (for sliding liquid) Contour milling unit (for fine trimming) CNC controlled 08.348 (kW 0.66 x 2) 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Spray unit (for polishing liquid) Buffing unit 08.612-2 (kW 0.25 x 2) Universal milling unit for grooving/rebating and profiling 08.183 (kW 3 x 1)

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Gantry design, equipped with ICOS-Open control system. Software: IMAWOP + IMAwinCAD. Set-up table with consoles. Number of consoles: 6 (1450 mm) DYNAPOINT Automatic positioning of consoles (X-axis) Automatic positioning of vacuum clamps (Y-axis) Automatic tool changer – 18 tool positions Max. working area (X-Y-Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and control panel. Total connected load: 34 kW WORKING UNITS (TOP): No. 1 vertical main spindle (milling unit), HSK F63, drive power: 18 kW (S6) Fixed 90° saw, diameter 200 mm Tedpfetixpuox Abgsf Edge banding unit (installed on the machine) VT 100 2-fold coil magazine Combi-unit (flush-trimming/profile scraper) Feed system with brush table No. 6 clamps for securing and moving the panel on the machine vacuum cups Workpiece outfeed with motorized rollers and angle transfer system

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edge) thickness (min/max) mm: 0.3 / 3 Veneer edges possible in a limited way up to max. 1.0 mm Panel thickness (min/max): 8 mm / 40 mm (with MFA) / 60 mm (without MFA) Control/software: ICOS Open Feed speed (adjustable) m/min: 6 - 30 Top pressure system with motorized timing belt Spraying device (for liquid anti-stick) Adjustable fence Jointing cutter unit - 08.378 (2 x 4.5 kW) Gluing unit (Hot Melt glue) 04.1570 Todpfx Aor Ttflebgef Pressure zone Edge magazine for rolls (compartment no.): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max. 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and contour trimming unit) 08.342 CNC controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal milling unit for grooving/rebating and profiling 08.190 (1 x 4.5 kW)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Tedsi Hn Srjpfx Abgef Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) for edge banding (mm): 3100 x 1925 x 60 No. 6 clamping tables with consoles (number of consoles) - mm 1400 LED set-up aid for vacuum cup positioning (Y-axis) No. 1 vacuum pump (capacity 250 m³/h) Operator protection cabin for working head, safety tread mats Tsdpfeq Nmutjx Abgjf No. 1 vertical main spindle (milling unit) HSK F63 (18 kW) Automatic tool changer (carousel type) with 18 tool stations No. 14 independent vertical drilling spindles (2 x 1.2 kW) Cross aggregate with 4 horizontal drilling spindles + grooving saw (max. diameter 125 mm) Edgebanding unit – gluing station (hot melt glue) VT 100 No. 2 edge magazines for rolls OPTIONS: No. 1 adapter unit “FLEX 5” model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraping blade No. 1 barcode reader

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH-SIZE-ONE PRODUCTION AND SINGLE-SIDED EDGEBANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE Tsdpfx Askt Uuaobgof M.02) SINGLE-SIDED (right) FORMAT AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Coil material (edges) thickness (min/max) mm 0.3 / 3 Control/software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 jointing milling units with CNC control 08.378 (4 motors x 4.5 kW) Gluing unit (Hot Melt adhesive + pre-melter) VTG + 283.205 Edgeband magazine for coil material (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Premilling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (CNC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine milling) CNC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating, and profiling 08.190 (3 x 4.5 kW) CNC controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO"

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 - 3 mm Panel thickness (min/max): 8 - 60 mm Control: ICOS open compact Feed speed (adjustable): 6 - 30 m/min Pressure belt, driven – with spraying unit (for liquid anti-adhesive) Tsdpfeltmnljx Abgsf Panel feeding system: A1 / 15 Adjustable fence – CNC controlled, panel infeed system Barcode reader Joint trimming unit with CNC control 08.379 (2 x 4.0 kW) Radiator for workpiece edge heating Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressure zone. Edge height setting – CNC controlled. Edge magazine for rolls (number of compartments): 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding agent) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free slot Universal milling unit for grooving, rebating, and profiling 08.190 (4.5 kW x 1)

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge Thickness in Rolls (min/max) mm: 0.3 / 3 Edge Thickness in Strips (min/max) mm: 3 / 12 Panel Thickness (min/max) mm: 8 / 60 Control: ICOS open TS Feed Speed m/min (adjustable): 4 - 20 Top Pressure: V-belt driven Spraying Unit (for liquid anti-adhesive) Adjustable Fence, CNC controlled Jointing Milling Unit 08.379 (2 x 4.0 kW) Gluing Unit (Hot Melt Adhesive & PUR Glue) 283.1513 Pressure Zone for Edges (CNC-controlled) Edge Magazine for Rolls (compartment no.): 1 End Trimming Unit 08.415 (2 x 0.66 kW) Pre-Milling Unit 08.055 (2 x 1.0 kW) Form Milling Unit (Copying) SKF-L (CNC) 2 x 0.18 kW + 2 x 0.4 kW Profile Scraper Unit 08.519 Flat Scraper Unit 08.521 Teded Nt N Hopfx Abgof Buffing Unit 08.617-2 (2 x 0.18 kW) Universal Milling Unit for Grooving/Rabbetting and Profiling 08.190 (1 x 4.5 kW) 90°-180°-270° OPTIONAL: Infeed Table 65.152 (mm 500 x 500) The Return Conveyor "GELDMEIER" Mod. ? (Ref. No. Z02009)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Tjdpoifnzdefx Abgef Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)