Dvosmerni stroji za lepljenje robov nakup rabljenega (68)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 50 kg, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, dolžina obdelovanca (maks.): 2.500 mm, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Gkjdpfxex Ezz Hs Ab Tof Workpiece thickness: 12 - 40 mm Minimum workpiece size (L x W): 250 x 240 mm Maximum workpiece size (L x W): 2,500 x 1,200 mm Maximum workpiece weight: 50 kg Edging material (coil stock) - material thickness: 0.4 - 3 mm Maximum edge cross-section (plastic): 135 mm Maximum edge cross-section (veneer): 100 mm Maximum coil diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0.6 mm Longitudinal processing speed: up to 30 m/min for thick edge up to 3 mm Cross-processing speed: up to 30 m/min for panel sizing Cross-processing speed: up to 20 m/min for edge processing Minimum distance between workpieces: 500 mm MACHINE DETAILS Connected load: 6.6 kW (double planer longitudinal/cross) Standard milling unit: 6.6 kW EQUIPMENT Top/bottom separation agent spraying unit A3 gluing station with 2 rollers FF12 profile milling unit top/bottom, motors 12,000 rpm FA11 finishing unit top/bottom Continuously adjustable stop cams with max. cam stroke of 25 mm Pre-milling unit: 0.55 kW PUR OTT 2-kg melting station

Stanje: zelo dobro (rabljeno), 4-sided sizing and edge banding line Panel dimensions: min. 195 x 250 x 60 mm / max. 1200 x 2500 x 60 mm The line consists of the following machines: KZ0400a) Infeed table "HOMAG" model TBL 100/25/12/S with motorized rollers Feed speed (adjustable): 7–40 m/min KZ0400b) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 325/M1/C Feed speed (adjustable): 15–40 m/min with PC 22 SIZING UNIT: Twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: Top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), grooving unit for rabbeting and grooving UF11 (4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) Godpjiztxysfx Ab Tekf KZ0400c) Rotating station (90° longitudinal-transverse) "HOMAG" model TDL 310 / 25 / 12 (for longitudinal to cross transfer) Feed speed (adjustable): 20–60 m/min KZ0400d) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 326/M2/C Feed speed (adjustable): 15–32 m/min with PC 22 SIZING UNIT: Pre-milling cutter (1 x 4.5 kW), twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: End trimming unit HL 84 (2 x 0.22 kW), top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), profile trimming/copying unit FF32 (4 x 0.4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) MINIMUM EDGE LENGTH: 70 mm (For narrow workpieces: max. thickness 25 mm, max. edge thickness 2 mm, max. cycle rate 20 pcs/min, max. feed speed 20 m/min.)

Stanje: rabljeno, številka stroja/vozila: 007818, Vrsta pritrjene obloge: tanka obloga, močna obloga Sistem lepljenja: EVA Multifunkcijska enota: da Stroj za lepljenje robov: stroj 1 in 2 Maks. širina panela: 3000 mm Maks. podajalna hitrost: 40 m/min Delovne enote, desna stran: 12 kos Delovne enote, leva stran: 12 kos Gedpfx Aewu Ab Tsb Tekf

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 Gkedpfx Abod Nt Rqj Tef - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Godpjdh Tfgofx Ab Tjkf Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE, including for NARROW PARTS min. 65 mm, with high-speed conveying technology, No. 3 CNC-controlled through-feed drilling machines (one for lateral drilling in longitudinal direction), and No. 1 through-feed crosscut saw (splitter) Comprising the following machines: W05024A) Loading device (gantry) "RBO (BIESSE)" model Winner C W05024B) 1st Single-sided sizing and edge-banding machine (left) "BIESSE" model Stream SB1 TWIN W05024C) 2nd Single-sided sizing and edge-banding machine (right) "BIESSE" model Stream SB1 TWIN W05024D) 1st Turning device (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" model GPK-1 W05024E) Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 / 11.0 W05024F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024H) 2nd Turning device (90° TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" model GPK-2 W05024I) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (for lateral drilling in longitudinal direction) W05024J) Through-feed crosscut saw (splitter) "TECNOLOGICA" Gkjdpetr Envsfx Ab Tef W05024K) Dust extraction and cleaning machine "WANDRES" W05024L) Stacking device (gantry) "RBO (BIESSE)" model Winner SC

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (optionally 3000) Cam pitch (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transfer bar (Master & Slave systems) FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Jointing cutter unit 08.376 (4.5 kW x 2) Free space Gjdpfx Aeu Ekbnob Tekf EDGE GLUING PROCESSING (for each side): Gluing unit (hot melt adhesive) 283.205 Edge pressure section. Edge magazine for rolls (No. 2 positions) End trimming unit 08.42 (0.2 kW x 2) 0°-25° (max. working speed 50 m/min, servo motor) Milling unit 08.055 (0.66 kW x 2) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (0.66 kW x 2) Spray unit (for polishing fluid) Free space (for optional scraper addition) Buffing unit 08.617 (0.18 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 60 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Godpfjwxwyfsx Ab Tokf Cam spacing (mm): PROCESSING UNIT (for each side): Sprayer unit (for liquid anti-stick) Pre-milling cutter (profile trimming) 1 x kW 4.5 Chipper KD 11 (2 x kW 6.6) – free space EDGEBANDING SECTION (for each side): Gluing unit (PUR glue + premelter) QA 34 (FeMa-Tech) Pressure zone (CNC-controlled) "A" Edge magazine for rolls (compartment No. 6) End trim saw HL84 (2 x kW 0.22) 0°-30° Pre-milling unit (2 x kW 0.55) Contour milling unit (for fine trimming) CNC-controlled FK 13 (2 x kW 0.4) turret 8+8 Free space Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + smoothing unit) FA 11 OPTION: Universal milling unit for grooving/rabbetting and profiling UF11 (1 x kW 4)

Stanje: zelo dobro (rabljeno), COMPLETE 4-SIDED EDGE PROCESSING AND EDGE BANDING LINE, max. working width 3000 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X03001A) Loading portal (with 2 loading stations) "RBO" Model Winner C 3200 X03001B) 1st double-sided sizing and edge banding machine "BIESSE" Stream SB 1 - 7.5 X03001C) Workpiece turning device (90° LONGITUDINAL to TRANSVERSE) "RBO" Model GPK 1 Godoi Rbg Tjpfx Ab Tekf X03001D) 2nd double-sided sizing and edge banding machine "BIESSE" Stream SB 2 - 11 X03001E) Workpiece turning device (90° TRANSVERSE to LONGITUDINAL) "RBO" Model GPK 2 X03001F) Unloading portal (with 2 unloading stations) "RBO" Model Winner S 3200

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED FORMATTING AND EDGE BANDING LINE (also "SOFTFORMING") with automatic conveying equipment. For panel thicknesses up to 100 mm. Comprising the following machines: W05025A) Loading Unit (Portal) "MAHROS" Model Brush W05025B) Double-sided Formatting and Edge Banding Machine "HOMAG" Model KFL 620/23/QE/30 (softforming) FORMATTING SECTION (for each side): Jointing milling unit (2 x 6.6 kW) Free space Left only: 2 x Universal milling units (rotatable) (2 x 6.6 kW) EDGE BANDING SECTION (for each side): Gluing unit (Hot melt adhesive + pre-melter) Edge magazine for rolls (compartment no. 1) Edge pressure zone for both STRAIGHT and SOFTFORMING End-trimming unit WK14 (2 x 0.8 kW) Milling unit (2 x 0.55 kW) Profile milling (copying) unit FF 12 (4 motors) WD70 Profile scraper unit PN20 Finishing unit (flat scraper + smoothing unit) FA11 Gsdpfott Dqpox Ab Tekf W05025C) Stacking Unit (Portal) "MAHROS" Model Brush

Stanje: zelo dobro (rabljeno), Double-sided single machine (first machine in a production line) Gkodpfx Ajifnxxsb Tef Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof cabins PROCESSING AREA (per side): Milling unit KD 10 (2 x 6.6 kW) EDGEBANDING AREA (per side): Gluing unit (hot-melt glue + premelter) A3 + A34 (high speed package) Pressure zone Edge magazine for rolls (compartment no.) 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Finish unit (scrapers + smoothing unit) FA 11 Universal milling unit for grooving/rebating and profiling UF11 (1 x 4 kW) 0°-90°

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINES – First (1st) machine in a production line Edge Material (roll) Thickness (min/max) mm: 0.3 / 3 Panel Thickness (min/max) mm: 10 / 60 Working Width (min/max) mm: 230 / 1600 (approx.) Control / Software: WinEdge Feed Speed (adjustable) m/min: 10 - 30 (approx.) Protective and soundproof enclosures SIZING UNIT (per side): Gjdpfxjl Hydmj Ab Tskf No. 2 Hogging units (2 x 5.8 kW approx.) No. 2 Jointing units aft (2 x 4 kW approx.) EDGE BANDING SECTION (per side): Gluing unit (Hot Melt glue + pre-melter) Pressing zone (CNC-controlled) Edge magazine for rolls (slot number): 6 Pre-milling unit 08.055 (2 x 1 kW approx.) Milling unit (2 x 0.5 kW approx., 0°-30°) No. 5 Universal milling units for grooving/rabbeting and profiling (5 x 4 kW approx.) Profile scraping unit Flat scraping unit Spraying unit (for polishing liquid) Buffing unit + hot air blower – edge finisher

Stanje: zelo dobro (rabljeno), Double-sided machine (first machine in a production line) Edge thickness in coils (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 12 / 60 Working width (min/max) mm 195 / 1500 Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min 15 - 40 Safety and noise protection cabin FORMATTING UNIT (per side): Spray unit (for liquid non-stick agent) Gedpfx Aewxwxbeb Tokf Chipping unit KD 10 (2 x 6.6 kW) Open station EDGE BANDING SECTION (per side): Gluing unit (PUR glue + pre-melter) QA 34 (FeMa-Tech) Pressure zone (CNC-controlled) Type A Edge magazine for coils (slot no. 6) Universal milling unit for grooving, rabbeting and profiling SF 20 (HSK63F - 4.5 kW) 0°-90° CNC horizontal Pre-milling unit (2 x 0.55 kW) Milling unit MF 21 (2 x 0.55 kW) Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + polishing unit) FA 11

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED EDGE BANDING AND SIZING LINE. The line consists of the following machines: J10039A) Infeed station with double pick-up station "MAHROS" model Brush Gkodpfx Abohmkxqe Tsf J10039B) 1st double-sided edge banding and sizing machine "IDM" model Activa SB 1/9900 J10039C) Turning station "MAHROS" model _____ (90° LONGITUDINAL-TRANSVERSE) with double cone J10039D) 2nd double-sided edge banding and sizing machine "STEFANI" model Performance SB2 J10039E) 90° side pusher "MAHROS", complete with motorised roller conveyor and motorised 90° belts to transfer the panels to the MAHROS unloader J10039F) Brushing and cleaning machine "WANDRES" model BI46/1/1300 J10039G) Stacking unit with double buffer station "MAHROS" model Brush

Stanje: zelo dobro (rabljeno), KOMPLETNE DVOSTRANE MAŠINE ZA FORMATIRANJE I NANOŠENJE KANT TRAKE, sačinjene od: OZ2050A) Stanica za ubacivanje 'MEINERT' model P 415 D/B - L, dvostruka stanica za prihvat. Sa centralno motorizovanim rolno-stolom. Sa dve motorizovane rolne postavljene na podu za dopremu složenih ploča do stanice za ubacivanje. OZ2050B) Prva dvostrana mašina za formatiranje i lepljenje kant trake 'IMA' model Combima / II / 440 / A / R3 OZ2050C) Povezani rolni sto 'IMA' model IDK L/Q sa obrtanjem (od uzdužnog ka poprečnom smeru) OZ2050D) Druga dvostrana mašina za formatiranje i lepljenje kant trake 'IMA' model Combima / II / 590 / B / R3 Gkjdpfx Asxftt Ejb Tof OZ2050E) Povezani rolni sto 'IMA' model IDK Q/L sa uređajem za obrtanje (od poprečnog ka uzdužnom smeru) sa dvostrukim konus sistemom OZ2050F) Dvostrana stanica za skidanje sa palete 'MEINERT' model P 415 D/S - L, kompletna sa centralno motorizovanom rolnom trakom. Sa dve motorizovane rolne trake.

Stanje: zelo dobro (rabljeno), Double-sided stand-alone machine (or can be used as the 1st and/or 2nd machine in a production line). Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 60 mm Working width (min/max): 240 / 2500 mm Control: PC 22 Feed speed (adjustable): 10–40 m/min Cam pitch: 500 mm EDGE PROCESSING (for each side): - Protection milling unit (pre-milling): 1 x 4.5 kW (hydro) - Chipping aggregate KD 11 (2 x 8.1 kW) hydro EDGE BANDING UNIT (for each side): - Gluing unit (hot melt + pre-melter): A3 + A34 - Edge magazine for rolls (slot no. 6) - Edge pressure zone “C” - Pre-milling unit: 2 x 0.55 kW - Milling unit MF 20 (2 x 0.55 kW) 20° - Profile scraping aggregate PN 20 - Finishing unit (flat scraper + buffing aggregate) FA 11 Free space Godpfxjlikydj Ab Tjkf

Stanje: zelo dobro (rabljeno), Double-sided stand-alone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max, option): mm 20 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 250 / 3000 (approx.) Feed speed (adjustable) m/min: 12 - 40 (approx.) Safety and noise protection cabin Cam spacing (mm): 500 Gjdpfsk Nk R Dex Ab Tjkf EDGING PROCESSING (for each side): Spraying unit (for liquid anti-adhesive) Protection milling unit (pre-milling) (1 x approx. 4 kW) Rough-milling unit (2 x approx. 5.8 kW) Universal profiling spindle, 1 x approx. 4 kW EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) Edge magazine for rolls (2-fold) + edge pressure zone End trimming unit (2 x approx. 0.35 kW) Pre-milling unit (2 x approx. 1 kW) Milling unit (2 x approx. 0.5 kW) 0°-30° Multi-function unit (radius/contour milling unit) with 2 revolvers (8+8 positions) – max. 27 m/min Universal grooving/rebating and profiling spindle 1 x approx. 4 kW (0° - 90°) Profile scraping unit + flat scraping unit + buffing unit

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE, max. working width 2500 mm The line consists of the following machines: Gkodpfsdg Itmsx Ab Tof U06051) Motorized roller conveyor (infeed table) "HOMAG" model TBL 100/25/12/S U06052) 1st double-sided sizing and edge banding machine "HOMAG" model Profi KFL 525/8/A3/15 U06053) Rotation station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model Profi TDL 310/25/12 U06054) 1st double-sided sizing and edge banding machine "HOMAG" model Profi KFL 526/9/A3/25

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness for rolls (min/max) mm: 0.4 / 3 Edge thickness for strip veneer (max) mm: 1.3 Panel thickness (min/max) mm: 10 / 45 Working width (min/max) mm: approx. 244 / 2300 Control/Software: ICOS Open Feed speed (m/min): 8 - 40 No transmission bar (Master & Slave systems) Gsdpfxsfi Tkvs Ab Tekf Safety and noise protection enclosure Retractable alignment stops, distance (mm): 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. adhesive + premelter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End-trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°-30° Multifunction unit (radius milling and profile trimming) MFA 08.342 (0.66 kW x 2), max 25 m/min Profile trimming unit (copying) 08.465 (0.18 kW x 4), max 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free bay

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINES – First (1st) machine in line Edge thickness from coil (min/max) mm Edge thickness in strips (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Godpfx Aofi Tkgsb Tskf Control/software ICOS open Feed speed (adjustable) m/min 9 - 45 No transfer bar (master & slave systems) Pressure belt driven by V-belt FORMATTING UNIT (for each side): Jointing/milling unit 75.30 (kW 6.6 x 1) EDGE-BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1569 + 283.205 Pressure rollers (turret) for straight and softforming edges mm 1,050 Edge magazine for coils (number of slots) 6 End trimming unit 08.42 (kW 0.2 x 2) 40 m/min Pre-milling unit 08.055 (kW 0.66 x 2) 0°-30° Milling unit 08.0582 (kW 0.66 x 2) 0°-30° Scraper unit 08.50 Buffing unit 08.617-2 (kW 0.18 x 2)

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: Gkedpfsdt Rgvsx Ab Tsf VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in line) Edging material (edge) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Cam pitch (mm): 500 FORMATTING UNIT (per side): - Pre-milling cutter (trimming) AS 10 (5.8 kW) - 2 x Hogger DT 10 (5.8 + 5.8 kW) - Spray unit (for liquid anti-adhesive) EDGE BANDING UNIT (per side): - Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edging pressure area (CNC-controlled). Edge magazine for rolls (capacity 6 rolls) - End trimming unit IT 90-S (0.3 kW x 2) 28 m/min. 0 - 25°. PNEUMATIC - Multi-profile milling unit (CNC-controlled) RF 30 (0.65 kW x 2) 0 - 25° Multi-function unit (radius milling and shaping) AR 80 (0.3 kW x 2) 25 m/min - ROTAX Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraper unit (CNC-controlled) RB 30 Flat scraper unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) Gkodpfou Tg Uqex Ab Tef With 'hopper' for panels (usable height 80 mm), as a buffer to speed up the work cycle

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. B) TURNING TRANSFER (longitudinal/crosswise), with double cone "RBO" Model GPK-1 C) Double-sided edge banding and sizing machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180°, with top side down) "RBO" Model Ribaltatore E) TURNING TRANSFER (crosswise/longitudinal), with double cone "RBO" Model GPK-2 F) STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor. Gksdpfxjhvah No Ab Tsf

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in one line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 0.4 - 12 Panel thickness (min/max) mm: 8 - 100 Working width (min/max) mm: 240 - 3000 Control system: Power Control PC22 (Windows XP) Software woodCommander Feed speed (adjustable) (m/min): 10 - 40 Safety and sound-insulation cabins Retractable positioning stops, distance (mm): 400 Gsdett Iudepfx Ab Tskf FORMAT PROCESSING (for each side): Jointing milling unit (2 x 6.6 kW) Open space Left side only: 2 x universal milling units (rotatable) (2 x 6.6 kW) EDGE BANDING SECTION (for each side): Gluing unit (Hot Melt glue + premelter) E34 Pressure roller track (revolver type) for straight and shaped (softforming) edges, GL sextuple Edge magazine for coils (1 slot) End trimming unit WK14 (2 x 0.8 kW) 25 m/min (0°-30°) Milling unit (2 x 0.55 kW) 0°-30° Contour copying unit (tracing) FF12 (4 motors) WD70 20 m/min Profile scraping unit PN20 Finishing unit (flat scraper + buffing unit) FA11

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Edgebanding material (edges) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and noise protection enclosure Side adjustment of aggregate carriers: manual Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Protection milling cutter (pre-milling) AS 10 (5.8 kW) 2 x Hogging units DT 10 (5.8 + 5.8 kW) Spraying unit (for liquid non-stick agent) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) Edge pressure zone (CNC controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28m/min, 0 - 25°. Pneumatic Multi-profile milling unit (CNC controlled) RF 40 (1 kW x 2) 0 - 25° Multi-function unit (radius and contour copying/trimming) AR 80 (0.65 kW x 2) 25m/min ROTAX motors with automatic tool changer 2 Universal milling units for grooving/rebating and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraping unit (CNC controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) Gkjdpfxehvahhe Ab Tsf