Homag Espana nakup rabljenega (476)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device Fpslsyqybuohccqrjd MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, delovna širina: 1.935 mm, število vreten: 40, višina plošče: 350 mm, delovna dolžina: 6.200 mm, število osi: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in the tool magazine: 22 (at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X-direction: 4 Spindles for horizontal drilling in Y-direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer Folhccsyqx U Heqrjpd MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum pods for securing the workpiece Safety mats at the front Vacuum pump Chip conveyor Fixed grooving unit for grooves in X-direction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and accepts responsibility for installation, securing, and use of the machine at the destination. External reference: 8105

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Ta industrijska proizvodna linija HOMAG WEEKE je bila izdelana leta 2007. Ima celovito postavitev za obsežno obdelavo plošč in lepljenje robov, vključno z avtomatskimi nakladalnimi sistemi, centralnim valjčnim transporterjem, več moduli za lepljenje robov ter portalnim manipulatorjem za zlaganje. Idealna za optimizirano lesno proizvodnjo, zagotavlja učinkovito rokovanje in natančnost. Razmislite o priložnosti za nakup te industrijske linije HOMAG WEEKE. Kontaktirajte nas za več informacij o tem stroju. Vrste uporabe Fpelhjx D Dq Ssccqrod Kompletna proizvodnja

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, usato centro di lavoro verticale CNC Produttore: Homag Modello: Drillteq V-500 Edition25 Ore principali di utilizzo: ca. 1.800 ore Campo di lavoro X: 200 – 3.050 mm Campo di lavoro Y: 70 – 850 mm Campo di lavoro Z: 12 – 60 mm, spessore speciale pezzo: 8 mm Mandrini di foratura verticali: 15 pz. Fjlhceymz Rvecqropd Mandrini di foratura orizzontali in X: 6 pz. Mandrini di foratura orizzontali in Y: 4 pz. Lama per scanalatura orientabile a 90° UNITÀ DI SCANALATURA/FRESATURA PER CLAMEX-P POSTAZIONI DI INSERIMENTO SPINE (COLLA BIANCA) Mandrino di fresatura da 10 kW; 1.250 – 24.000 giri/min Cambio utensili a 4 posizioni Sistema di bloccaggio pezzo con pinza di serraggio Lunghezza massima pezzo: 3.050 mm Larghezza pezzo: 50 – 1.250 mm Spessore pezzo: 8 – 80 mm; peso massimo: 60 kg Controllo POWERCONTROL PC86 power touch con display multitouch Full HD da 21,5″, sistema operativo Windows 10 Connessione di rete, predisposizione Tapio WoodWop 7.0 incl. software MDC e liste di produzione Sistema base di lettura codici a barre La consegna comprende esclusivamente tutti gli utensili e i portautensili HSK mostrati nelle immagini!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5.383 h, HOMAG DRILLTEQ V-200 je kompaktni in visoko učinkoviti navpični CNC obdelovalni center, zasnovan za natančne vrtalne, utorne in rezkalne operacije pri izdelavi pohištva in omar. Fslhoym Ny Sjccqrjpd Zaradi vertikalne obdelave zasede stroj minimalno talno površino, hkrati pa ponuja veliko prilagodljivost in produktivnost. Idealno je primeren tako za serijsko kot tudi za individualno proizvodnjo. Stroj je v zelo dobrem tehničnem stanju in ga je mogoče preizkusiti pod napetostjo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Homag EDGETEQ S-380 - Optimat KDF 660 SC Največja debelina robnega traku pri lepljenju: 12 mm Felhccex Itb Rsqrspd Največja debelina plošče: 60 mm Največja debelina navitega materiala: 3 mm Minimalna širina obdelovanca: 70 mm Primerna za PUR lepilo Enota za taljenje PUR Magazin trakov / robov Spojna rezkalna enota Tlačna cona z NC-krmiljenjem Enota za prečno žaganje (razrez na mero) Postaje za rezanje / zaobljanje / posnemanje Kotni kopirni agregat Strgalo za profile, ravno strgalo Polirni (ščetkarski) agregat

Stanje: zelo dobro (rabljeno), EINSEITIGER KANTENANLEIMER (links) Kanten (Band auf Rollen) Dicke (min/max) mm 0,3 / 3 Kantenstärke in Streifen / Leisten (min/max) mm 0,4 / 20 Plattenstärke (min/max) mm 8 / 60 NEU (2024) Numerische Steuerung EDGETEQ MOD - Power Touch (WoodCommander) Einstellbare Vorschubgeschwindigkeit bis zu 25 m/min Zuführsystem EZ 14 Sprühvorrichtung (Antihaftmittel) Anschlaglineal, per N.C. verstellbar Vorfräseinheit (vertikale Fugenfräser) 2 x 3 kW Leimeinheit (P.U.R.-Leim + Schnellschmelzsystem) Druckzone für das Band, per N.C. einstellbar Kantenrollen-Halteeinheit (mit 2 Abrollern) Abschneideeinheit HL 84 (2 x ca. 0,5 kW) Pneumatisch schwenk- und einstellbar Fslsyt Izbshccqrspd Grobschneideeinheit BF 20 (2 x ca. 1,5 kW) Multifunktionseinheit (Konturfräsen) FK 11 (2 x ca. 0,4 kW) Konturabzieheinheit Feineinheit (Leimabzieher + Poliereinheit) FA 11 Plattenrückführungssystem "LIGMATECH" Mod. ZHR 541/L/095 (mit Portalbrücke und 360° drehbarem Vakuumkopf)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Fslhccsytr Hbsqrspd Motor power: 0.25 kW Total installed power: 35 kW FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, moč: 19 kW (25,83 KM), potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.730 mm, število vreten: 20, Število orodnih postaj v orodni glavi 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of traverses with suction: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X direction: 2 Number of spindles for horizontal drilling in Y direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Fpelhsyttf Ssccqrjd Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Safety cover at the front The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6906

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.550 mm, višina obdelovanca (maks.): 40 mm, število vreten: 30, največja hitrost vožnje: 80.000 mm/min, TECHNICAL DETAILS Travel distance X-axis: 4,175 mm Travel distance Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Max. workpiece height: 40 mm Number of traverse beams with suction cups: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X direction: 10 Total number of spindles: 30 Milling Unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid cooled Saw Unit Fpslhccqoyttcwersd Tool Magazine 1 Number of slots: 18 Tool Magazine 2 Number of slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 7350

Stanje: rabljeno, Leto izdelave: 2000, HOMAG BOF 31/40/G je industrijski CNC obdelovalni center, namenjen natančnemu formatiranju, vrtanju in rezkanju ploščatih delov v pohištveni proizvodnji. Stroji serije BOF sodijo med robustna proizvodna središča, primerna za serijsko in fleksibilno izdelavo pohištvenih delov. Model je zasnovan kot univerzalno proizvodno vozlišče z možnostjo avtomatizacije in integracije v proizvodne linije HOMAG. Fpelhcjynb N Uocqrod

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 3 Ta 3-osni stroj HOMAG WEEKE OPTIMAT BHX 500 je bil izdelan leta 2011. Ponaša se z robustnim CNC obdelovalnim centrom z delovnim območjem 2500 mm x 1300 mm, glavno elektro vreteno ima moč 6 kW, največja debelina obdelovanca pa je 80 mm. Vključuje 84 vrtalnih vreten in dvojni rezkalni vreteni, vsaka z močjo 6 kW pri 18.000 vrtljajih/min. Če želite kakovostne CNC zmogljivosti, razmislite o stroju HOMAG WEEKE OPTIMAT BHX 500, ki je na voljo za prodajo. Za več informacij nas kontaktirajte. Fslox D Nvgohccqropd Vrste uporabe CNC obdelava lesa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.200 mm, dolžina pomika po osi Y: 1.600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Pripravljen za 1 glavno vreteno s lepilno skupino, nameščeno desno na portalni prečnik. Glavno 5-osno vreteno, 12 kW Vrtalna glava s 31 vreteni: 21 vertikalnih in 10 horizontalnih Vrtalni list za utore, nagib 90° Pihalna šoba za borbo 60 mm Krožni magacinski sistem za 32 orodij, HSKF63 Linearni magacinski sistem za 8 pozicij Krožni magacinski sistem za 10 pozicij Lepilna skupina Power Edge Pro Duo Fpolhex Irzcsccqrsd Varnostni nadzor z odbijačem Odrezovalni trak za ostružke Vakuumska črpalka Upravljalna programska oprema PowerTouch, WoodWop

Stanje: rabljeno, številka stroja/vozila: 006376, Max. panel width: 1000 mm Fpslhjyqxypjccqred Max. panel length: 2500 mm Conveyor length: 10,000 mm Part return for edge banding machine: left

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Edge banding machine from 2006. The HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, allowing for workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It is equipped with a single-sided edge banding unit capable of processing various edge materials up to 20 mm thick. If you are looking for high-quality edge processing solutions, consider the HOMAG Optimat KAL 330 edge banding machine that we have for sale. Contact us for further details. • Line workpiece capacity: • Length: 250–3000 mm • Width: 120–1200 mm • Thickness: 8–60 mm • Edge banding machine (KAL 330) – Base and transport • Solid machine frame; extendable workpiece support with roller rail, ~800 mm • Transport chain, 80 mm wide with rubber pad; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed: 18–25 m/min • Working height: 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece offset/overhang: 30 mm • Workpiece thickness: 12–60 mm • Edge material from strip: 0.4–20 mm (max. cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max. cross-section: PVC 135 mm², veneer 100 mm²) • Max. coil diameter: 830 mm • Pneumatic connection: 7–8 bar • Feed system and control (integrated with KAL 330) • Flexible workpiece feed system wz10 for automatic feeding (longitudinal and transverse); for dimensionally accurate, square parts • Stepless adjustment of infeed guide (axis), speed adjustable at the entry terminal • Automatic lateral adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Entry terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control Fslhccqeytf Irjropd • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granulate storage • Quick-change system for QA/QE application unit; QA front glue reservoir for color change • Base glue unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max. Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Milling unit HL84 with fixed milling fence for sensitive edges • Pneumatic milling motor adjustment (2 positions: flush/even and with overhang for contour milling) • Pneumatic bevel/straight switching; manual side milling fence adjustment for changing edge thickness • Rough trimming unit: 2 motors arranged vertically, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: rough trimming with approx. 0.2 mm overhang / without overhang • Reserved space for a fine trimming unit • Contour milling unit Servo FK13 automatic: • 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Servo-driven movements; automatic 8-position tool changer • Feed speed max. 20 m/min; minimum distance between workpieces: 500 mm • Workpiece thickness: 12–60 mm • Automatic FK adjustment for consistent radii with varying edge thicknesses; automatic retraction • FK workpiece guide with additional clamping for min. 120 mm workpiece length (single-sided) • Finishing and cleaning • Multi cleaning system MN21 automatic:

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood koda: RU0010622 - Koda proizvajalca: 2-083-01-0276 - Stanje: rabljeno - Funkcionalnost: ni testirano - Združljiv stroj: - Teža: 3 kg - Dimenzije: 36x26x21 cm - Če vas zanima, nudimo storitev pregleda, kontaktirajte nas. Fpjlhcjyrq Alscqred

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: RU0010621 - Koda proizvajalca: 2-083-01-0278 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Združljiv stroj: - Teža: 3 kg - Dimenzije: 36x26x21 cm - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. Fpjlhccqjyrqzujrod

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: RU0006834 - Koda proizvajalca: 4-085-08-0202 - Stanje: Rabljeno - Funkcionalnost: Ni testirano - Kompatibilni stroj: - Teža: 10 kg - Dimenzije: 70x46x34 - Če ste zainteresirani, nudimo storitev pregleda, kontaktirajte nas. Felhccjyrqykoqrepd

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ferwood koda: AGG0073 - Koda proizvajalca: 1-056-11-0660 - Stanje: Rabljeno - Funkcionalnost: Popolnoma delujoče - Kompatibilnost stroja: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Teža: 10 kg - Dimenzije: 46x39x27 - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Fpjlhccsyrpxxeqrod

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ferwood koda: AGG0073 - Koda proizvajalca: 1-056-11-0660 - Stanje: Rabljeno - Funkcionalnost: Popolnoma delujoče - Kompatibilnost stroja: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Teža: 10 kg - Dimenzije: 46x39x27 - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Fslhcceyrpw Ioqropd

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003572 - Koda proizvajalca: 2-007-03-3970 - Stanje: Kot novo (razstavni kos) - Funkcionalnost: Popolnoma delujoče - Združljivost z napravami: - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Fjlhcsyrn Ryscqrjpd 2KG - 36X26X21

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003547 - Koda proizvajalca: 3-008-23-1410 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoč - Združljiv stroj: - V primeru zanimanja ponujamo storitev pregleda, kontaktirajte nas. 4KG 46X39X27 Felsyrn I Eohccqropd

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ferwood koda: RS0003546 - Koda proizvajalca: 3-812-08-5500 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Kompatibilen stroj: - Če vas zanima, nudimo storitev revizije, kontaktirajte nas. 3KG 36X26X21 Folhccqoyrn Irjrjpd

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003545 - Koda proizvajalca: 2-025-15-2020 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Združljiv stroj: - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. 3KG 36X26X21 Fslhccoyrn Ifoqrjpd

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ferwood koda: RS0003544 - Koda proizvajalca: 2-025-15-2010 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Združljiv stroj: - Po želji nudimo servisni pregled, kontaktirajte nas. 3KG 46X39X27 Felhsyrn Hbjccqrjpd