Homag Kal 210 nakup rabljenega (487)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: nepreverjeno, hitrost pomika os X: 25 m/min, skupna dolžina: 7.755 mm, višina obdelovanca (maks.): 40 mm, delovna višina: 950 mm, model krmilnika: PowerControl PC22, TECHNICAL DETAILS Bwsdoyc S Haepfx Aa Ssh Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece projection: 30 mm Workpiece thickness: 12 - 40 mm Edge material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edge material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Scissor-type workpiece support with roller support, extendable by 1000 mm Automatic infeed fence adjustment Fixed stop on the left side Pneumatically controlled infeed lock Upper pressure by powered combination V-belt Electric height adjustment Workpiece transport system via transport chain with rubber pads Release agent spray unit (top/bottom) Joint milling unit 2 x 3 kW Gluing unit A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick-change system, 2-roller magazine, pressure zone C (automatically adjustable, with 1 pre-press roller and 6 post-press rollers) End trimming unit HL84 0.8 kW, with automatic adjustment for bevel/straight as well as pneumatic adjustment for flush/overhanging trimming Pre-milling unit 1.5 kW, pneumatic adjustment for flush/overhanging milling Contour milling unit FK11 with automatic adjustment from bevel to radius milling Profile scraper PN10 (with pneumatic retraction for lateral offset) Finishing unit (with pneumatic retraction for lateral offset), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Stanje: rabljeno, številka stroja/vozila: 005385, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA, laser Jointing cutters: yes Multi-function unit: yes Max. feed speed: 25 m/min Bodpfx Aaog Iy Duo Sjwh Maximum panel thickness: 60 mm Working units: 8 units

Stanje: rabljeno, številka stroja/vozila: 006042, Tip nameščene obloge: tanka obloga, močna obloga Leplilni sistem: EVA Spojno rezkanje: da Večnamenski agregat: da Zgornji rezkalni agregat: da Maks. hitrost podajanja: 25 m/min Maksimalna debelina plošče: 40 mm Delovni agregati: 9 kos Bsdewacqlopfx Aa Sewh

Stanje: rabljeno, številka stroja/vozila: 007575, Type of applied edge: thin edge, thick edge Adhesive system: EVA Bwjdpoybawwofx Aa Soh Joint milling: yes Multifunctional unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 pcs

Stanje: rabljeno, številka stroja/vozila: 006849, Type of attached edge: thin edge, thick edge, solid wood Gluing system: EVA Jointing milling: yes Multifunction unit: yes Bodpfxjwd Itmj Aa Sswh Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 7 pcs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, širina obdelovanca (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Bodpfx Aox Tqgbea Sswh Feed: continuous Electric height adjustment: available Pressure: top belt pressure Pre-heating zone: available Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special feature: with nesting capability - new chains - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 - HOMAG FA 11 finishing unit

Stanje: rabljeno, Leto izdelave: 2014, Power Control PC 22 control unit with WoodWop – POWERTOUCH software. Panel thickness: 8 - 60 mm. PVC/ABS edge thickness: 3 mm. Feed speed up to 25 m/min (20 m/min with corner rounding). Electronically adjustable working height via CNC. Motorized, rubberized belt with superior pressure. Panel support guide and assisted loading for small panels. Controlled infeed guide. Anti-adhesive unit. Pre-milling unit with two 3 kW motors, 9000 rpm, with ball bearings. Glue application unit for PUR adhesive with pre-melter and glue tank. Edge pressure unit for straight profiles with electronically adjustable pressure rollers (CNC-controlled). Trimming unit with two motors (automatic tilt adjustment?). End trimming unit with two motors. Corner rounding unit with two multifunction motors (trimming + rounding) with CNC control. Edge scraping unit. Glue scraping unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS MUST BE VERIFIED. Bedpfxsvqbh Es Aa Sowh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Allgemeine Daten Abmessungen Tiefe: 7845 mm Maschinengewicht: 5000 kg Bwodpox D H R Uefx Aa Sjh Zusätzliche Ausstattung HOMAG Leim- und Finish-Komponenten Diese HOMAG KAL 210 AMBITION 2264 Kantenanleimmaschine wurde 2010 hergestellt. Sie bietet eine maximale Anleimerdicke von 20 mm, eine Kantenanleimhöhe bis zu 60 mm sowie eine maximale Vorschubgeschwindigkeit von 25 m/min. Ausgestattet mit Granulat-Leimsystem, Vorheizzone und verschiedenen Bearbeitungseinheiten, darunter eine Fügefräseinheit und eine Eckenrundungseinheit. Nutzen Sie die Gelegenheit, diese HOMAG KAL 210 AMBITION 2264 Kantenanleimmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Anwendungsbereiche Kantenanleimen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, širina obdelovanca (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Bwedpfx Aajxg Ix Se Soh Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Pressure: top belt pressure Pre-heating zone: available Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special feature: with nesting capability - new chains - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 - HOMAG FA 11 finishing unit

Stanje: rabljeno, številka stroja/vozila: 008294, Pozicija 1: Enostranski robni lepilni stroj HOMAG + LIGMATECH-KAL 210 + ZHR 01 Pozicija 2: Povratna enota za plošče HOMAG + LIGMATECH-KAL 210 + ZHR 01 Bedpfxox A Tf Ne Aa Sewh

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-200-03-8334, hitrost pomika os X: 24 m/min, višina obdelovanca (maks.): 60 mm, model krmilnika: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Bodpfx Aajydiyms Sewh Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fuse: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Working height electronically adjustable via CNC Motorized rubberized pressure belt Panel support guide Side roller conveyor with free-running rollers for panel support Sanding unit Lamps for preheating panel edge 6-position coil holder magazine with automatic edge change via CNC Gluing unit for EVA hot-melt adhesive with premelter and glue pot Pressure station for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 motors and automatic tilt adjustment Overlapping trimming/milling unit with 2 motors Adhesive/milling unit with 2 tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (scraper + rounding) with numerical control, automatic adjustment Space reserved for possible installation of an additional working unit Edge scraping unit Oscillating brush unit

Stanje: rabljeno, Leto izdelave: 2005, Enostranski robni lepilni stroj, namenjen natančnemu in stabilnemu lepljenju masivnih in ploščnih materialov (iverne plošče, MDF, laminat). Stroj je oblikovan kot kompaktna, a popolnoma opremljena rešitev za malo- in srednjeserijsko proizvodnjo s poudarkom na kakovosti obdelave robov. Masivni litoželezni okvir zagotavlja visoko togost stroja in dolgoročno geometrijsko stabilnost. Stroj je opremljen s klasičnim neprekinjenim transporterjem s pritisnim trakom in popolnim naborom obdelovalnih agregatov za končno obdelavo roba v enem prehodu. Tehnična sestava stroja: Predrezkalna enota Ogrevanje materiala Samodejni dozirnik EVA lepila Nanašalni valj EVA Odrezovalne žage (sprednja in zadnja) Groba rezkalna enota Bsdpfx Aasyfw Syj Sswh Zaokroževalna enota Radijska strgala Strgalo za lepilo Rezkalni agregat za utore Krtačna enota Povratni transporter

Stanje: rabljeno, številka stroja/vozila: 006253, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, PUR Jointing cutters: yes Bwsdpfxjl Txxge Aa Soh Multi-function unit: yes Maximum feed speed: 40 m/min Maximum panel thickness: 60 mm Working units: 10 pcs

Stanje: rabljeno, številka stroja/vozila: 006252, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, PUR Jointing cutters: yes Multi-function unit: yes Bwjdpfx Aaewcycks Seh Maximum feed speed: 40 m/min Maximum panel thickness: 60 mm Working units: 10 pcs

Stanje: rabljeno, številka stroja/vozila: 008146, Tip pritrjene obrobe: tanka obroba, močna obroba Sistem lepljenja: EVA Povezovalno rezkanje: da Multifunkcijska enota: da Maks. hitrost podajanja: 25 m/min Delovni agregati: 7 kos Bwedpfx Aew Tiv Tsa Soh

Stanje: rabljeno, številka stroja/vozila: 006432, Tip pritrjene obrobe: tanka obroba, močna obroba Lepljenje: EVA Spojno rezkanje: da Multifunkcijska enota: da Zgornja rezkalna enota: da Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 9 kos Bwsdpfx Aaet Hmq Hs Ssh

Stanje: rabljeno, številka stroja/vozila: 006375, Tip nameščenega roba: tanek rob, močan rob Lepilni sistem: PUR Bedpfxjp Apx Ts Aa Sowh Spojno rezkanje: da Večnamenski agregat: da Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 9 kos

Stanje: rabljeno, številka stroja/vozila: 004592, Tip nalepljenega roba: tanek rob, močan rob, masivni les Sistemsko lepljenje: EVA Predfrezanje: da Multifunkcijska enota: da Maks. podajna hitrost: 24 m/min Maksimalna debelina plošče: 60 mm Bodjwcmxlspfx Aa Sjwh Delovni agregati: 8 kos.

Stanje: rabljeno, številka stroja/vozila: 008148, Pozicija 1: Enostranski robni lepilni stroj HOMAG + LIGMATECH-KAR 210 AMBITION 2274 Bwedpfextugcex Aa Seh Pozicija 2: Sistem za vračanje plošč HOMAG + LIGMATECH-KAR 210 AMBITION 2274

Stanje: rabljeno, številka stroja/vozila: 008246, Položaj 1: Enostranski robilni stroj HOMAG-KAL 310 + ZHR 05 Položaj 2: Povrat plošč HOMAG-KAL 310 + ZHR 05 Bodpfxjx A Hi Io Aa Sewh

Stanje: rabljeno, številka stroja/vozila: 007176, Tip pritrjene obrobe: tanka obroba, močna obroba Lepljenje: EVA Bodpfx Aajybaw Ds Sswh Spojno rezkanje: da Multifunkcijska enota: da Zgornja rezkalna enota: da Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 9 kos

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Ta HOMAG KAL 330/6/A3/S2 je bila izdelana leta 2009. Rabljeni robni lepilni stroj z lepilnim agregatom za EVA talilno lepilo, tlačno cono, rezalnim agregatom, kopirno rezkalno glavo, strgalo in polirnim agregatom. Vključuje sistem za vračanje obdelovancev LIGMATECH. Izkoristite priložnost za nakup tega robnega lepilnega stroja HOMAG KAL 330/6/A3/S2. Za več informacij nas kontaktirajte. Bsdpfxjychdue Aa Sowh

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Bwodpfx Aaswx Aaqo Soh Condition: well-maintained, regularly serviced (last maintenance by Homag in 11/2024) Equipment and technical data: - Minimum workpiece thickness: 12 mm - Maximum workpiece thickness: 60 mm - Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) - Edge thickness min: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max: 3 mm (coil material) / 20 mm (strip material) - Feed speed: infinitely variable, 18–25 m/min (frequency controlled) - Adhesive type: EVA hot-melt glue - Glue application (pot / cartridge / nozzle): melting unit with granulate container - Glue capacity / cartridge size: granulate container, melting performance 18–35 kg/h, level regulated - Heat-up time: approx. 8–10 min - Edge magazine (slots): 2 rolls (automatic roll change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: cross-cutting unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) - Chamfer / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in finishing unit FA11 - Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW - Workpiece preheating: available - Release agent spray unit: top / bottom, type 2929 (F.01) - Extraction ports: several Ø 100 mm (individual extraction for each unit) - Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant according to EC Directive 98/37/EC Dimensions / Space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the pictures is not included in the scope of delivery! Availability: short-term Location: 63934 Röllbach

Stanje: rabljeno, številka stroja/vozila: 008244, Tip pritrjenega roba: tanek rob, debel rob Sistem lepljenja: EVA, laser Spojno rezkanje: da Bedpfx Aox Swgfsa Sjwh Multifunkcijska enota: da Maks. podajna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 8 kos

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE “SOFTFORMING” - Min/max edge thickness (roll material) mm: 0.3 - 3 - Min/max edge thickness (strips) mm: 0.4 - 12 Bedpfsfd Ilyox Aa Sswh - Min/max workpiece thickness mm: 12-60 - Control: Power Control PC 22 - Feed speed (variable) m/min: 12 - 24 - Top pressure with a motorized timing belt - Gluing unit (hot melt adhesives and pre-melter): QE 34 / E12 - Pressure roller track (revolver) for flat and contoured panels (softforming) - Single roll magazine - End cutting unit HL 84 (2 x 0.84 kW – 12,000 rpm) - Fine trimming unit (2 x 1.5 kW – 12,000 rpm) - Milling unit (2 x 0.4 kW – 12,000 rpm) OPTIONAL: Feeding system with longer infeed and 3-wheel motorized rubber top pressure