Enostranski stroj za robove

HOMAG KAL 210 AMBITION 2264

Stanje: rabljeno, številka stroja/vozila: 007575, Type of applied edge: thin edge, thick edge Adhesive system: EVA Hjdpfx Ajybawwog Toi Joint milling: yes Multifunctional unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 pcs

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Kratek opis Hodpfx Agsxvx Eze Tei Dimenzija miz: 3000 mm x 1300 mm Število cilindrov: 6 Tlak: 90 ton Odpiranje miz: 400 mm Ogrevanje z vročo vodo Kotlovnica: 20.000 kcal/h

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: nepreverjeno, obratovalne ure: 29.000 h, višina obdelovanca (maks.): 40 mm, hitrost pomika os X: 25 m/min, skupna dolžina: 7.755 mm, model krmilnika: PowerControl PC22, delovna višina: 950 mm, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece projection: 30 mm Workpiece thickness: 12 - 40 mm Edge material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edge material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Scissor-type workpiece support with roller support, extendable by 1000 mm Automatic infeed fence adjustment Fixed stop on the left side Pneumatically controlled infeed lock Upper pressure by powered combination V-belt Electric height adjustment Workpiece transport system via transport chain with rubber pads Release agent spray unit (top/bottom) Joint milling unit 2 x 3 kW Gluing unit A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick-change system, 2-roller magazine, pressure zone C (automatically adjustable, with 1 pre-press roller and 6 post-press rollers) End trimming unit HL84 0.8 kW, with automatic adjustment for bevel/straight as well as pneumatic adjustment for flush/overhanging trimming Pre-milling unit 1.5 kW, pneumatic adjustment for flush/overhanging milling Contour milling unit FK11 with automatic adjustment from bevel to radius milling Profile scraper PN10 (with pneumatic retraction for lateral offset) Finishing unit (with pneumatic retraction for lateral offset), consisting of glue joint scraper and buffing unit Remote control Hodpfx Aoyc S Hasg Tji Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Pressure: top belt pressure Pre-heating zone: available Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special feature: with nesting capability - new chains - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit Hsdpfjx Tqgbox Ag Tei - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 - HOMAG FA 11 finishing unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, For sale is a used Hammer circular saw-shaper B3Winner Comfort with a cutting length of 2000 mm. The machine is in excellent condition and has been professionally reconditioned and inspected by our specialist staff. (Fully functional) Hjdpjv Sbpxofx Ag Tei Technical data: - Tilting circular saw and shaper 90-45° - Sliding table 2000 mm - Outrigger table with angle index - Mitre fence 1300 mm - 4 spindle speeds 3000/6000/8000/10000 rpm - Cutting width 800 mm - 2 motors, each 5.5 HP (4 kW), 400 Volt - Year of manufacture: 2019 The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: circular saw, shaper, milling machine, combination machine, combi machine Reference: R-L0AHG

Stanje: rabljeno, Leto izdelave: 2014, Power Control PC 22 control unit with WoodWop – POWERTOUCH software. Panel thickness: 8 - 60 mm. PVC/ABS edge thickness: 3 mm. Feed speed up to 25 m/min (20 m/min with corner rounding). Electronically adjustable working height via CNC. Motorized, rubberized belt with superior pressure. Panel support guide and assisted loading for small panels. Controlled infeed guide. Anti-adhesive unit. Pre-milling unit with two 3 kW motors, 9000 rpm, with ball bearings. Glue application unit for PUR adhesive with pre-melter and glue tank. Edge pressure unit for straight profiles with electronically adjustable pressure rollers (CNC-controlled). Trimming unit with two motors (automatic tilt adjustment?). End trimming unit with two motors. Corner rounding unit with two multifunction motors (trimming + rounding) with CNC control. Edge scraping unit. Glue scraping unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS MUST BE VERIFIED. Hedpfjvqbh Eox Ag Tei

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Pressure: top belt pressure Pre-heating zone: available Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Hsdpfx Agjxg Ix So Tji Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special feature: with nesting capability - new chains - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 - HOMAG FA 11 finishing unit

Stanje: rabljeno, Leto izdelave: 2001, Širina reza: 3300 mm Dolžina reza: 3350 mm Teža: pribl. 4000 kg Izstop žaginega lista: 100–(115) mm Voziček žage: Hitrost podajanja: 1–100–(1–130) m/min. Hitrost povratka: 100–(130) m/min. Glavni žagin list: 400–(430) mm Motor: 7,5 - (11–13,2) kW Predrezilo: 215 mm Motor: 2,2 kW Pomikalnik: Hitri pomik: 1–60 m/min. Povratek: 60 m/min. Odsesavanje: Hitrost zraka: 30–35 m/sec. Priključek za odsesavanje: 200 mm / 115 mm Stisnjen zrak: Hedpfx Agjvvkqgo Tsi Tlak: 5–6 bar Poraba: 20–30 l/min. Lokacija skladišča: Nattheim

Stanje: novo, Leto izdelave: 2023, moč: 7 kW (9,52 KM), širina skobljanja: 520 mm, število rezil: 4, skupna masa: 483 kg, vrsta nastavitve višine: električni, premer gredi skobeljnika: 120 mm, višina skobljanja: 240 mm, SCM MiniMax s 52es Thickness Planer Specification: • Condition: New • Manufacturer: SCM • Planer table width: 520 mm • Planer table length: 850 mm • Minimum workpiece thickness: 3 mm • Maximum workpiece thickness: 240 mm • Maximum cutting depth: 5 mm • Motor power: 7 kW • Supply voltage: 400 V • Cutterblock: 4 conventional knives • Cutterblock diameter: 120 mm • Cutterblock speed: 5000 rpm • Maximum planing width: 520 mm Hodoqu U Dnspfx Ag Tsi • Feed speed: 5 / 8 / 12 / 18 m/min • Extraction port diameter: 120 mm • Weight (net): approx. 493 kg • Overall dimensions: 144 x 108 x 110 cm (W x L x H) Additional Information: • Factory new machine • Actual item condition shown in the pictures • Possibility to test and inspect the machine on-site • Price listed in the auction does not include VAT or transport costs • Available immediately from stock in Italy

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Machining Center Rover 20 Hedpfxolc Dwns Ag Tji Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills plus grooving saw, 6-position tool changer. The NC410 control system features a floppy disk drive, color screen, and very simple, graphically assisted programming options. Additionally, the Rover 20 already enables pendulum (dual-zone) machining. Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Control cabinet: 950 x 700 x 1,300 mm Ex site