Homag Kl 79 nakup rabljenega (484)

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, HOMAG Optimat KL79 A20/S2 (2002) – Popolna konfiguracija Linija za lepljenje robov je v zadovoljivem delovnem stanju, povsem delujoča in pripravljena za proizvodnjo. Vgrajene enote: • Leplilna postaja A20/S2 (debelina roba do 20 mm) • Magacinski podajalnik robnih trakov • Enote za čelno/ zadnjo porezavo (dva žagina modula) • Enote za zgornje/spodnje porezovanje • Enote za zaokroževanje vogalov (dve glavi) • Profilni rezkalniki (zgoraj/spodaj) • Enota za strganje lepilnega spoja Fgedpeycg D Tsfx Apljb • Polirne/leščilne enote • Pnevmatsko krmiljenje ter sistem za odsesavanje Tehnični podatki (po specifikacijah proizvajalca): • Hitrost podajanja: 18–24 m/min • Debelina roba: 0,3–20 mm • Debelina obdelovanca: 12–60 mm • Minimalna širina obdelovanca: 55 mm (pri debelini 22 mm) / 100 mm (pri debelini 60 mm) • Dolžina stroja: 10.115 mm • Teža: cca 6.200 kg • Napajanje: 400 V, 50/60 Hz • Tlak stisnjenega zraka: 8 bar

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0/200/06/3164, skupna masa: 6.500 kg, skupna dolžina: 12.600 mm, teža obdelovanca (maks.): 5.500 kg, Stroj za mehko oblikovanje robnega traku, v obratovanju, rabljeno stanje, leto izdelave 2003, Fodpfx Aevx Ep Nsplsgb

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 0-200-21-3286, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 56 A, vrsta vhodnega toka: trifazni, največja debelina roba: 20 mm, Oprema: CE označba, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edgebanding, and post-processing of various edge materials. Fixed fence on the right. NOTICE: Fully functional machine SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as the workpiece feed system, - Max. workpiece thickness: 60 mm - Motorized height-adjustable top pressure - Workpiece support with rollers, moveable on rails - Glue pot lift-off when feed is stopped - Glue roller clamping before workpiece trailing edge - (Remote) manual control for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming (climb & conventional), 2 x 3.5 kW, operation-controlled EDGEBANDING UNIT A20, consisting of: - QA34 glue application unit - EVA glue premelter - Edge magazine for edge thickness from min. 0.4 mm up to max. 20 mm - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven, 6 non-driven pressure rollers POST-PROCESSING SECTION: - End trimming unit HL81, 2 motors (front/rear edge) with motorized fine adjustment of end stops - Pre-/flush trimming unit 1.5 kW, top/bottom - Profile trimming unit FK13 (corner rounding), 2 motors (top/bottom) with automatic 8-position tool changer Fsdpfx Aey H Hzbjplogb with several interchangeable heads - Profile scraper MN11, top/bottom, with automatic revolver positioning - Flat scraper FA10, top/bottom (version with 3 sensing rollers) - Belt sanding unit KS10, straight edges, with oscillation - Buffing unit top/bottom CONTROL: HOMATIC NC 21

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 0-200-24-6287, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 56 A, največja debelina roba: 20 mm, Oprema: CE označba, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and post-processing of various edging materials. Fixed fence on the left side. NOTE: Very well-maintained machine with low operating hours. SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain for workpiece feed, - Maximum workpiece thickness: 60 mm - Motorized height-adjustable pressure beam - Workpiece support with rollers, extendable up to approx. 700 mm - Glue pot lift-off when feed stops - Glue roller clamping before workpiece rear edge - (Remote) manual control for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit with synchronous/counter-rotation, 2x4kW, operation-controlled GLUING UNIT A20, comprising: - QA34 glue application unit - Pre-melter for EVA adhesive - Edge magazine for edge thickness from min. 0.4 mm to max. 20 mm - Pressure zone with automatic horizontal adjustment (NC) according to edge thickness, 1 powered and 6 non-powered pressure rollers Fedpfjyv Da Hjx Aplsgb POST-PROCESSING SECTION: - HL81 end trimming unit, 2 motors (front/rear edge) with motorized fine-adjustable trimming stops - Pre-/flush trimming unit 1.5 kW, top/bottom - FK13 corner rounding unit, 2 motors (top/bottom) with automatic 8-position tool changer and multiple exchange heads, iSystem - Profile scraper MN21, top/bottom, with axis positioning - Flat scraper FA10, top/bottom, (version with 3 tracing rollers) - KS10 belt sanding unit, for straight edges, with oscillation - Buffing unit top/bottom CONTROL: HOMATIC NC 21

Stanje: rabljeno, Leto izdelave: 2003, številka stroja/vozila: KL 77/A20/S2, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 20 m/min, skupna dolžina: 9.000 mm, Oprema: dokumentacija / priročnik, Wij bieden deze gebruikte HOMAG Optimat kL 77/A20/S2 EVENT kantenlijmer, bouwjaar 2003, aan. Fabrikant: HOMAG Model: Optimat kL 77/A20/S2 EVENT Bouwjaar: 2003 Toestand: gebruikt Type machine: kantenlijmer De machine wordt verkocht vanwege de aanschaf van een nieuwe. Ze is momenteel nog in bedrijf en volledig functioneel. Een zeer solide machine met retoursysteem inbegrepen. Altijd stabiel en levert een perfecte afwerking! Uitrusting: - Nozzles / lijmsproeiers - Formaatfrezen, diameter 100 mm - Blaasunit - Voorverwarmingsunit - PUR-lijmsysteem met patroonte verwarming - 7 drukrollen - Afkortzagen, recht en in verstek - Boven- en ondervoegfrezen - Profielkopfrezen R1/R2 mm - Profiel-/vlakscharen - Nozzles / lijmsproeiers - Polijstborstels Fgedpfx Apeyw N Apelsb - Machine is voorzien van boven- en onderbandtransport (zeer stabiel) - Voorzijde in hoogte verstelbaar (automatisch) - Profielkopfrezen automatisch verstelbaar via het programma - Afkortzagen automatisch ingesteld - Alle functies zijn bedienbaar via het frontpaneel - Retoursysteem bestuurd via de pc -> Demo mogelijk bij interesse! Prijs op aanvraag via privébericht. Neem gerust contact op bij vragen of voor meer informatie. If you have any questions or require further information, please feel free to send us a message or call us.

Stanje: dober (rabljeno), INDUSTRIAL SINGLE-SIDED EDGEBANDER HOMAG OPTIMAT High-performance single-sided edgebander designed to meet industrial production requirements. With advanced technology and a versatile configuration, this machine is ideal for processing panel edges quickly, accurately, and with excellent quality. Key features: - Homatic CNC control for intuitive and precise operation management. - Trimming units to ensure perfect surfaces. Fodpfx Apeuh Acaslegb - Gluing unit with pre-melter for uniform adhesive application with minimal waste. - Edge pressure unit for stable and durable finishing. - Double end trimming unit for fast, precise finishing. - Overlapping double flush trimming unit for smooth, flawless edges on both sides of the panel. - Multifunction corner rounding unit for comprehensive, detailed edge processing. - 0°/90° milling group for high-precision edge finishing. - Edge and glue scraping units for impeccable cleaning and optimal surface finish. - Brushes for thorough cleaning and surface finishing. - Space available for the addition of supplementary units for further customization. - Spare tooling groups for easy and continuous maintenance. Every edgebanding operation is made simple and fast, increasing production efficiency without compromising quality.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, obratovalne ure: 33.000 h, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 25 m/min, model krmilnika: Power Control PC22, delovna višina: 950 mm, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width with workpiece thickness of 22 mm: 55 mm Minimum working width with workpiece thickness of 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edging material, strips max.: 0.4 - 20 mm Edge cross-section, strips max.: 900 mm² Edging material, roll: 0.3 - 3 mm Maximum edge cross-section for PVC: 135 mm² Maximum edge cross-section for veneer: 100 mm² Maximum roll diameter: 830 mm MACHINE DETAILS Control: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Fgodsyc Sr Ajpfx Aplob Continuous machine base for mounting processing units Workpiece support with roller rail, extendable by approx. 800 mm Glue roller drive when feed is stopped Glue pot lifting mechanism when feed is stopped Workpiece-actuated glue pot clamping Automatically adjustable infeed fence Pneumatically controlled infeed guard Feed unit with 2 rollers Infeed extension 500 mm Automatic pressure zone adjustment Sliding carriage Pre-installed Boomerang ZHR05 return system Workpiece support in extended scissor design Operating data acquisition Electric height adjustment Fixed stop side on the left Workpiece transport device Top pressure Separating agent spraying unit Jointing cutter unit, 2 x 3 kW Glue application unit A20 Basic for roll material up to 3 mm and strip material up to 20 mm, with melt unit, granulate container and quick-change system End trimming unit, 2 x 0.8 kW, with pneumatic adjustment Lubricant spraying unit Pre-milling unit 1.5 kW, pneumatically adjustable Contouring milling unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with infinitely variable axis Multi trimming unit MN21, automatic Finishing unit FA11, with trimming unit, cleaning agent application and buffing unit, pneumatically adjustable Noise protection Space for additional processing units Note: The machine is sold without working tools. Container loading and sea packaging are not possible by the seller.

Stanje: zelo dobro (rabljeno), Power Control control system – CadMAtic 4 Professional software Fgodpfxjvnq H Ee Aplsb Roller conveyors for feeding the lifting table (mm 32,000) Lifting table (mm) 5,600 x 2,200 VAC infeed cart for gentle loading of sensitive single panels via vacuum 1st pusher saw with no. 6 collets Turning device (for panels) up to 90° 1st panel dividing saw, max. cutting width (mm) 5,600 (cutting line with air cushion) Max. saw blade protrusion (mm) 190 Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (max. saw diameter / power) mm 600 (kW 36) Adjustable saw carriage feed (QS) (m/min) 1–130 2nd pusher saw no. 14 with collets 2nd panel dividing saw, max. cutting width (mm) 2,200 (cutting line with air cushion) Max. saw blade protrusion (mm) 190 Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (max. saw diameter / power) mm 600 (kW 36) Adjustable saw carriage feed (QS) (m/min) 1–130 Shaker trough, chip removal conveyor belt with cross-cutting unit (kW 19.5) No. 2 front air-cushion tables (+ 1 additional and more) (mm 800 x 2,160) Rollers in flocked design for highly sensitive materials Automatic stacking (No. 2 transfer tables: No. 2 x Liftomat HAU-A 25/12) Automatic stacking system with 8 stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, številka stroja/vozila: 70004, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, Tehnične specifikacije Dimenzije - dolžina: 9,8 m - širina: 1,5 m - višina: 1,8 m Moč motorja: 40 kW Oprema - pomična hitrost: 6 - 30 m/min - debelina plošče: min. 8 mm, maks. 60 mm - širina plošč (z robom): min. 65 mm (pri debelini roba 0,4 - 3 mm) - dolžina plošče: min. 150 mm - višina roba: min. 14 mm, maks. 65 mm - debelina roba: min. 0,4 mm, maks. 20 mm Fgjdpfxjyzc Igj Apleb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, PLATTENAUFTEILSÄGE WINKELANLAGE Steuerung PowerControl V2.1 - CADmatic 5 (Tapio ready) Angetriebene Rollenbahnen mm 2200 x 4500 ca. Hubtisch (mm) 4300 x 2200 1° Einschiebersäge mit Nr. 4 Spannzangen 1° Plattenaufteilsäge Max. Schnittbreite (mm) 4300 Max. Sägeblattüberstand (mm) 125 Vorritzsäge (max. Sägeblattdurchmesser / Leistung) mm 180 (Kw 2,2) Hauptsäge (Sägeblattdurchmesser max / Leistung) mm 450 (420) Kw 18 Regelbarer Sägewagenvorschub (m/min) 1 - 130 2° Einschiebersäge mit Nr. 8 Spannzangen 2° Plattenaufteilsäge Max. Schnittbreite (mm) 2200 Max. Sägeblattüberstand (mm) 125 Vorritzsäge (max. Sägeblattdurchmesser / Leistung) mm 180 (Kw 2,2) Hauptsäge (Sägeblattdurchmesser max / Leistung) mm 450 (420) Kw 18 Regelbarer Sägewagenvorschub (m/min) 1 - 130 Fgjdpfx Apjx Aqdceleb Nr. 2 vordere Luftkissentische (2 x mm 800 x 2810) Gesamtanschlusswert A 102 OPTION: Nr. 1 Schrottschleifer

Stanje: zelo dobro (rabljeno), Power Control control system + CadMatic 4 Professional software Roller conveyors for the lift table feed (no.) 1 x mm 18000 + (OPTIONAL: transverse chain conveyors in the 10 t lift table 5600 mm) Lift table (mm) 5600 x 2200 VAC loading cart for gentle loading of sensitive single panels using vacuum 1st pusher saw with clamping tongs (number) 6 Rotating device (for panels) 90° 1st panel saw, max. cutting width (mm) 5600 (cutting line with air curtain) Max. saw blade projection (mm) 170 Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (saw diameter max / power) mm 570 (kW 30) Adjustable saw carriage feed (QS) (m/min) 1 - 150 2nd pusher saw with clamping tongs (number) 7 (+ 1) Fodpfx Apjf Nkv Sjlogb 2nd panel saw, max. cutting width (mm) 2200 (cutting line with air curtain) Max. saw blade projection (mm) 170 Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (saw diameter max / power) mm 570 (kW 30) Adjustable saw carriage feed (QS) (m/min) 1 - 150 Shaking chute, chip removal conveyor, with crosscut saw (kW 19.5) 2 front air cushion tables (+ 1 additional and more) (mm 800 x 2160) Rollers in flocked design for highly sensitive materials Automatic stacking (2 transfer tables type 68/20 and type 58/24 + 3 belt conveyors: 2 x type 255/56/2 and 1 x type 27/56) Total connected load approx. 110 kW

Stanje: zelo dobro (rabljeno), PANEL SIZING SAW ANGLE SYSTEM Control system: CadMatic 4 Professional Powered roller conveyors (No.) 1 (mm 2200 x 4400) Lifting table (mm) 2200 x 4300 1st Infeed saw with clamping grippers (No.) 4 1st Panel sizing saw Max. cutting width (mm) 4300 Fsdopuh Dkjpfx Aplogb Max. saw blade projection (mm) 125 Scoring saw (max. saw diameter / power) mm 180 (kW 2.2) Main saw (max. saw diameter / power) mm 450 (kW 18) Adjustable saw carriage feed (m/min) 1 - 150 2nd Infeed saw with clamping grippers (No.) 8 2nd Panel sizing saw Max. cutting width (mm) 2200 Max. saw blade projection (mm) 125 Scoring saw (max. saw diameter / power) mm 180 (kW 2.2) Main saw (max. saw diameter / power) mm 450 (kW 18) Adjustable saw carriage feed (m/min) 1 - 150 Front air cushion tables No. 2 (+1 additional and more) Total connected load (kW) 52.6

Stanje: rabljeno, Multiplexer, control card, input card, control unit, edge banding machine, edge bander -Manufacturer: Homag Homatic -Type: 2-083-02-7921 -Type: 2083027921 -Quantity: 2 control cards available -Price: per piece -Dimensions: 130/340/H30 mm -Weight: 0.28 kg Fodecc Enxopfx Apljgb

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2-017-95-2630, Motorno vreteno za CNC stroj Weeke BOF in BAZ. - Na voljo 7 kosov (od tega 2 kosa z osjo C); - 12000 - 24000 obr/min; - 16kW Fgsdpfjxnbmfex Apleb - HSK 63

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: Excellent condition – used only for demonstration and sample production. Machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical data and equipment: Continuously adjustable feed speed: 16–25 m/min Workpiece thickness: 8–60 mm Fixed fence on the left-hand side Working height adjustable Pre-installation for LOOPTEQ O-200/O-300 return system Feed lock system Workpiece alignment at infeed with roller support Top pressure unit Sizing package with DIA joint trimming cutter set WD40 Gluing package with preheating up to 60 mm thickness Adhesive application system with emptying function Edge magazine with two vertical roll holders Pressure zone PERFORMANCE2 package End trimming unit PK25 Rough trimming unit BF10 (I-HM straight cutter set) Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) Multi-scraper MN21 automatic with profile knife set Fodpfx Aexwurysplogb Cleaning agent spraying unit Glue joint scraper FA20 BASIC Buffing unit FP10 top and bottom PowerControl PC23 PowerTouch control system TAPIO Ready Ethernet network connection Wired manual control for setup operation Software package WOODCOMMANDER with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions Documentation in Slovenian (digital and paper format) Remote service enabled

Stanje: rabljeno, številka stroja/vozila: 008522, Pozicija 1: Robot HOMAG + KUKA-KFL10 + KR Pozicija 2: Enostranski robni lepilni stroj HOMAG + KUKA-KFL10 + KR Pozicija 3: Robot HOMAG + KUKA-KFL10 + KR Pozicija 4: Povrat plošč HOMAG + KUKA-KFL10 + KR Fedpfx Aoy Nx U Ejplegb

Stanje: rabljeno, številka stroja/vozila: 008526, Delovno območje os X: 4000 mm Delovno območje os Y: 1100 mm Delovna površina: z vakuumskimi konzolnimi nosilci Fgedpfxey Nx Ulj Aplob Moč glavnega vretena: 12 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 35 Število orodnih mest: 29

Stanje: rabljeno, številka stroja/vozila: 008527, Delovno področje os X: 6000 mm Delovno področje os Y: 1400 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 15 kW Število kontroliranih osi: 5 osi Največja višina roba: 65 mm Število vrtalnih vreten: 21 Število mest za orodja: 77 Fodsy Nx Ufjpfx Apljgb

Stanje: dober (rabljeno), Leto izdelave: 2003, številka stroja/vozila: 0-201-22-4227, Funkcionalnost: omejena funkcionalnost, dolžina obdelovanca (maks.): 4.800 mm, višina obdelovanca (maks.): 80 mm, število mest v zalogovniku orodij: 18, moč vretenovega motorja: 7.500 W, število vreten: 2, hitri pomik na osi Z: 30 m/min, hitro pomikanje X-os: 80 m/min, hitri pomik os Y: 80 m/min, največja hitrost vretena: 18.000 obr/min, hitrost vretena (min.): 18.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Glavna vretena je opremljena z osjo C in razširitvijo za agregat Flex 5 Območje obdelave X: 4800 mm Območje obdelave Y: 1300 mm Območje obdelave Z: 80 mm Fgjdpsxdxa Isfx Aplob 8 konzol 1 vakuumska črpalka 18-pozicijski premični menjalec orodja Nosilec orodij HSK 63 Horizontalna adapter vrtalna glava s 4 fiksnimi vreteni Vrtalna glava s 17 vreteni Dodatno vreteno s vpenjalnim nastavkom Merilna sonda Centralno avtomatsko oljno mazanje Dvižne tirnice za konzolno mizo

Stanje: rabljeno, številka stroja/vozila: 008323, Tip pritrjene obrobe: tanka obroba, močna obroba, masiven les Lepilni sistem: EVA, PUR Fgjdpfox Hpkxjx Apljb Spojno rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 20 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 7 kos

Stanje: rabljeno, številka stroja/vozila: 008324, Maks. širina plošče: 1000 mm Maks. dolžina plošče: 2500 mm Dolžina transporterja: 7000 mm Povratni tok kosov za stroj za lepljenje robov: desno Fsdpfxjx Hpkrs Aplegb

Stanje: rabljeno, številka stroja/vozila: 008244, Tip pritrjenega roba: tanek rob, debel rob Fgodpfx Aex Swgfeplob Sistem lepljenja: EVA, laser Spojno rezkanje: da Multifunkcijska enota: da Maks. podajna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 8 kos

Stanje: rabljeno, številka stroja/vozila: 008167, Delovno območje os X: 6000 mm Delovno območje os Y: 1750 mm Fjdpjx A Hczofx Apljgb Delovna površina: Z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 12 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 30 Število mest za orodja: 72

Stanje: rabljeno, številka stroja/vozila: 007350, Working area X-axis: 4000 mm Working area Y-axis: 1400 mm Working table: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Fgjdey Nkytopfx Apljb Number of drilling spindles: 30 Number of tool positions: 28

Stanje: rabljeno, številka stroja/vozila: 008245, Maks. širina panela: 1000 mm Maks. dolžina panela: 2500 mm Fodpfx Apjywad Relegb Dolžina transporterja: 9385 mm Povratek delov za robno lepilni stroj: levo