Homag Kl 79 nakup rabljenega (484)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (short line), max. working width 2500 mm, with automatic high-speed conveying system: Dujdev D U Urspfx Afaou O02006A) INFEED TABLE WITH ROLLER CONVEYORS "HOMAG" PROFI TBL100/30/12 O02006B)  ROTATION UNIT (longitudinal/transverse), "HOMAG" PROFI TDL/310/25/12 O02006C) Double-sided Sizing and Edge Banding Machine "HOMAG" Mod. PROFI KFL 526/10/A3/25 O02006D) ROTATION UNIT (transverse/longitudinal) "HOMAG" PROFI TDL 510/25/12

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 / Working width (min/max) mm: 225 - 3000 Control/Software: Power Control PC 22 - Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam distance (mm): 400 EDGING PROCESSING (per side): Protection milling cutter (pre-milling) 1 x kW 4.5 Roughing unit KD 11 (2 x kW 6.6) EDGE BANDING SECTION (per side): Gluing unit (Hot melt glue + pre-melter) A3 + SERVO Edge pressure zone “A” Edge magazine for rolls (compartment No. 2) End trimming unit HL 84 (2 x kW 0.22) Pre-milling unit (2 x kW 0.55) Milling unit 2 x kW 0.4 Profile copying milling unit FF 12 (4 motors x kW 0.4) LEFT SIDE: 2 x Universal milling units (electro-pneumatically controlled) UF 11 (kW 4 x 2) 0°-90° RIGHT SIDE: 1 x Universal milling unit (electro-pneumatically controlled) UF 11 (kW 4 x 1) 0°-90° Duedsp N D Ngspfx Afaou Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + smoothing unit) FA 11

Stanje: zelo dobro (rabljeno), EDGEBANDING AND POSTFORMING LINE for ONE-SIDED POSTFORMING PROCESSING (FOR DIRECT METHOD) Consisting of the following machines: A) Double-sided portal feed "TREVISAN" with motorized roller conveyor Djdpfx Afenzhxqjaouu B) HOMAG Single-sided POSTFORMING MACHINE FOR DIRECT METHOD, Model Profi VFL79/3/P/A - Maximum laminate thickness: 0.35 mm (for L- and U-profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit 2.2 kW (for scoring from above) - 02° Hogging unit 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit 6.6 kW (for rabbeting above), motor shaft for hydro tension - 04° Standard milling unit 6.6 kW (for rabbeting below) 0° - 120° (with hydro tension) - 05° Radius milling unit 0.7 kW (for profile trimming) - 06° Milling unit for top layer on U-profiles, HSK25 1.85 kW - 07° Universal milling unit UF 11 4 kW (for grooving or rabbeting) - 08° Milling unit 2.2 kW (for chamfer and laminate overhang milling above) - 09° Milling unit 2.2 kW (for bending groove milling below) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rabbeting), working width 160 - 1050 mm - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° - 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate breakout) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Basic pressure zone for L-profile VF Direct, for workpiece thickness max 50 mm - 16° Basic pressure zone for U-profile VF Direct, for special profile R = 2.5 mm - 17° Top rotary knife - 18° Top milling unit 1 x 0.55 kW, 0° - 30° - 19° Top buffing unit with oscillation 1 x 0.25 kW C) Double-sided portal stacking system "TREVISAN" with motorized roller conveyor

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and noise protection cabin Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick) Protection milling unit (pre-milling) 1 x kW 4.5 Chipping unit KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) A3 + A34 Dedpfx Afshvi E Ioaeuu Edge magazine for rolls (station No. 6). Edge pressure zone “A” (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multi-function unit (radius milling and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraping unit PN 20 Flat scraping unit (pneumatic) Polishing unit (2 x kW 0.25)

Stanje: zelo dobro (rabljeno), 4-axis CNC machining center for milling, drilling, cutting, and edge banding. Gooseneck machine – safety tread mats at the front CNC control type PowerControl PC 85 (WoodWop software) 10 support/consoles (mm 1340) LEDs indicate the programmed positions of the vacuum clamps (Y-axis) Automatic tool changer (carousel-type, 18 positions) Usable working area (X - Y - Z) mm 6175 x 1550 x 60 Usable working area for edge banding (X - Y - Z) mm 6000 x 1475 x 60 2 working zones – 2 vacuum pumps (capacity 100 m³/h) Chip conveyor for removing waste from the machining process Total connected load: 27 kW Working units (top) 17 independent vertical drilling spindles (2.2 kW) 4 independent horizontal drilling spindles 1 vertical electrospindle HSK F63 (main spindle 11 kW) Duodpjh Ucn Rsfx Afaou 1 groove saw unit 0°-90°, diameter (mm) 125 Edge banding unit Power Edge (Y-axis), gluing unit (hot-melt glue + pre-melter) Roll material (edge) thickness (min/max) mm 0.4 - 3 Edge magazine for rolls (2 positions)

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts Duedpfx Aeivawpjfasu No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20

Stanje: zelo dobro (rabljeno), Double-Sided Edge Banding Machine Duedpewk Hp Tofx Afaeu - Edge Thickness (coil) (min/max) mm: 0.3 - 3 - Workpiece Thickness (panel) min./max. mm: 12 - 40 - Working Width (min./max.) mm: 250 - 2500 - PC Control: PC22 - Top Pressure System with Driven Rubber Belts - Adjustable Fence Linear Feed Rate m/min: 10 - 32 - Liquid Glue Unit - Jointing Milling Unit (vertical milling machine): 2x 4 kW at 9000 rpm - Quickmelt Hot Melt Adhesive Unit A3 - Pressure Zone C (manual adjustment) "A" - Coil Holders for 2 Rolls - End Trimming Unit: HL 84 (2x 0.22 kW at 12000 rpm) - Premilling Unit (2x 0.4 kW at 12000 rpm) - Finishing Unit (Flat Scraper Unit + Buffing Unit): FA11 - Polishing Unit

Stanje: zelo dobro (rabljeno), A) Case clamp with CNC (electronic) Type MDE 110/28/08 Motorized transport and assembly conveyor Feed speed: 12 - 40 m/min CNC control Power Control PC C 22 T Total power 14 kW Overall machine length 6,220 mm Processing capacity for workpieces (mobile): Length Min / Max: 250 / 2,800 mm Depth Min / Max: 120 / 800 mm Height Min / Max: 280 / 1,320 mm Djdpfx Afelkbn Ieaouu B) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm) C) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in roll form (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Dusdpfxsuhv R Dj Afaju Working width (min/max) mm: 225 / 2500 Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable positioning cams, distance (mm): 1000 FORMAT PROCESSING (for each side): Pre-milling cutter (1 x 4.5 kW) Zerspanner KD 11 (2 x 6.6 kW) Jointing milling unit UF 20/S2 (2 x 4 kW) EDGE BANDING SECTION (for each side): “ZERO JOINT” SCHUGOMA Kantenking gluing unit (Option: EVA/PU glue) Edge magazine for rolls (2 compartments) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 BEVEL/STRAIGHT (2 x 0.22 kW) feed speed 25 m/min Pre-milling unit BF10 (2 x 0.55 kW) Multifunctional unit (radius and profile milling) FK11 (2 x 0.4 kW) Multiple-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spray unit (for polishing fluid) No. 2 universal milling units for grooving/rabbetting and profiling SF20 (2 x 6.6 kW) Powered panel infeed roller conveyor with "HOMAG" separation system Model POWER TBL 100/20/25

Stanje: zelo dobro (rabljeno), Single-sided Edge Bander (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 80 Edge thickness in strips/bands (min/max) mm: 0.4 / 20 Control system: NC21 Feed speed m/min: 18 Top pressure: V-belt driven Dedel Iz Tuopfx Afaouu Adjustable fence: CNC-controlled Jointing milling unit: 2 x 3 kW Gluing unit (Hot Melt + Pre-melter): A20 + A34 Edge pressure zone "C" Edge magazine for rolls (compartment no. 1) End trimming unit WK 14 (2 kW, 0.8 to 12,000 rpm), electro-pneumatic adjustment, chamfer/straight Pre-milling unit Optimat (2 x 1.5 kW) Milling unit MF20 (2 x 0.55 kW) Profile copying milling unit FF12 (4 x 0.4 kW), CNC (WD40) Free space for profiling scraper unit Finishing unit (Flat scrapers + Buffing unit) FA 10

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5.383 h, HOMAG DRILLTEQ V-200 je kompaktni in visoko učinkoviti navpični CNC obdelovalni center, zasnovan za natančne vrtalne, utorne in rezkalne operacije pri izdelavi pohištva in omar. Dodpfx Afsym Ny Sjasuu Zaradi vertikalne obdelave zasede stroj minimalno talno površino, hkrati pa ponuja veliko prilagodljivost in produktivnost. Idealno je primeren tako za serijsko kot tudi za individualno proizvodnjo. Stroj je v zelo dobrem tehničnem stanju in ga je mogoče preizkusiti pod napetostjo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Workpiece & Performance Panel Formats: • Length: 1,200–1,400 mm • Width: 195 mm • Thickness: 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack formation: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Loader Vacuum gantry for raw panel feeding (fixed edge right) • Workpiece weight up to 100 kg • Output up to 5 cycles/min • Pallet return + light barrier safety 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for loading • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Decor Alignment Station Aligns panels for decor-correct subsequent processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal division with edge trimming • Feed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT HPp11 Crosscut Station Crosscut in through-feed with pressure beam • Cutting width 2,200 mm • Pneumatic top pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Stack turner (2×8 compartments) for dissolving bundles • Conveyor speed 10–50 m/min 8. BARGSTEDT Angle Transfer (TW) 90° deflection with belt conveyors, feed up to 130 m/min For transfer into the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format machining • 6 units per side • 6.6 kW per unit • Tool Ø up to 200 mm • Joint edge color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Booth Enclosure for both HOMAG profiling machines • approx. 12,000 × 7,000 × 3,000 mm Post-Processing 12. BARGSTEDT TTK44/21/14/02 Flip Over Unit Workpiece turning in through-feed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Packing Station Automatic pack assembly with 1st/2nd grade sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Output 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Cartoning Station Folding and supply of cartons before packaging • Output up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic package marking (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrink Wrapping System Fully automatic film packaging with shrink tunnel • Connected load 36–40 kW • Output up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT TFB20/017/04 Belt Conveyor with Air Shower Cooling section after shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Cross Stacking Unit Automatic stacking onto pallets • Packages up to 1,400 × 195 × 58 mm • Output max. 12 cycles/min Dujdoywxraepfx Afaju 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum cups • up to 6 cycles/min • package weights up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic empty pallet supply for final palletizing

Stanje: dober (rabljeno), Leto izdelave: 2015, številka stroja/vozila: 0-200-24-0779, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 55 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, skupna dolžina: 10.825 mm, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and post-processing of various edge materials. Fixed fence on the left. Year of manufacture 2015. SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed unit, - Maximum workpiece thickness 60 mm - Motorized height adjustment of upper pressure unit - Workpiece support with roller rails - Glue pot lift for feed stop - Glue roller clamping in front of trailing edge of the workpiece - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit with 2x4kW (clockwise/counterclockwise), operation-controlled Horizontal positioning via NC motor (CAN bus) GLUING SECTION A20, comprising: - QA60 glue application unit with PTFE (Teflon) coating - Pre-melter for EVA glue - Suitable for both EVA and PUR adhesives - Edge magazine, min. 0.4 mm to max. 20 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) for edge thickness, 1 powered, 4 non-powered pressure rollers POST-PROCESSING SECTION: - PK25 end trimming unit, horizontal, 2 motors at 0.8 kW each (front/rear edge), for chamfering/straight cuts and excess trimming - Pre-/flush trimming unit 1.15 kW, top/bottom - FK11 corner rounding unit, 2 motors (top/bottom) with motorized fine adjustment, controlled from operating panel, equipped with various interchangeable heads with tools - Universal milling unit 3.5 kW, controlled - Multi-profile scraper, top/bottom - Flat scraper, top/bottom - Buffing unit, top/bottom CONTROL: PC 23 powerTouch - woodCommander 5 Dujdsy A I Sgepfx Afaju

Stanje: zelo dobro (rabljeno), CNC MACHINING CENTRE (POINT-TO-POINT) – 4 Axes Gantry-type design Power Control CNC – woodWOP software Safety enclosure for the machining head Clamping table with 6 consoles Safety tread mats LASER system on the X-axis for console positioning and on the Y-axis for vacuum pod positioning Automatic tool change system 2 disc-type tool changers – magazine/tool positions: W8 (8 rear) + (8 lateral) Maximum working area (X – Y – Z): 3130 x 1250 (1550) x 100 (150) mm 2 working zones – 1 x vacuum pump (capacity 70 m³/h) Chip conveyor With separate electrical cabinet and control system Total connected load: 32 A Duodpfxjyxn Tie Afaou WORKING UNITS (TOP): 12 independent vertical drilling spindles (High Speed 7500) 6 independent horizontal drilling spindles (4 in X-axis + 2 in Y-axis) Drilling head motor power: 2.3 kW 1 grooving saw unit, diameter 125 mm, N1 – swivels 90° in X-Y direction 1 vertical main spindle (milling unit) HSK 63, 9 kW OPTION: Drilling and milling unit with 4 horizontal spindles (cross spindle) BARCODE READING SYSTEM PACKAGE – PROFESSIONAL

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, dolžina obdelovanca (maks.): 2.500 mm, TEHNIČNE PODROBNOSTI Minimalna dolžina plošče: 300 mm Maksimalna dolžina plošče: 2.500 mm Povratek panela pri robni lepilki: levo Izmet plošče: s pomočjo mize z zračnimi šobami Stroj se prodaja in dostavi v dejanskem in pravnem stanju ("kot viden in sprejet") na podlagi fotodokumentacije ter tehnične/komercialne dokumentacije opisnega značaja. Kupec ima pravico, da blago pred prevzemom pregleda, odgovoren pa je za namestitev, zavarovanje in uporabo stroja na ciljnem mestu. Dujdpfxoyxnapj Afaju Zunanja referenca: 7877

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: 0-250-23-0021, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 1.000 mm, višina obdelovanca (maks.): 80 mm, hitrost pomika os X: 138 m/min, hitrost podajanja osi Y: 80 m/min, Oddaja ponudbe zavezuje k pravočasnemu prevzemu do 15.06.2026! TEHNIČNI PODATKI Hitrost X-osi: 138 m/min Hitrost Y-osi: 80 m/min Hitrost Z-osi: 50 m/min Dolžina obdelovanca: 300–2.500 mm Širina obdelovanca: 100–1.000 mm Višina obdelovanca: 4–80 mm PODROBNOSTI O STROJU Krmiljenje: power control PC 85 T Dimenzije (D x Š x V): 6.500 × 2.300 × 2.700 mm Elektrika: 3 × 415 V / 50 Hz Moč priključka: 19,5 kW Zaščita: 50 A Pneumatika: min. 7 bar Poraba zraka: 2.500 NL/min Dsdsy Sad Hspfx Afaeuu Priključek za odsesavanje: 2 × 280 mm Moč odsesavanja: min. 4.450 m³/h

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING LINE (Right) Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM Dusdpfx Afeinigmeaeu "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDER (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control / Software: PC 22 Feed speed (variable) m/min 18 - 32 Panel infeed system WZ 14/30 Joint trimming unit with CNC control (2 x 3 kW) DOUBLE gluing unit (PUR adhesive + pre-melter) 2 x PU 34 Pressure zone (CNC-controlled) - Edge magazine for coil material (No. 12 positions) End trimming unit WK13 (CHAMFER / STRAIGHT Automatic adjustment) Pre-milling unit (2 x 0.55 kW) Pneumatic adjustment Multi-profile milling unit (CNC-controlled) MF 21 (2 x 0.55 kW) Copying milling unit (profile copying) FF 32 (4 x 0.4 kW) Automatic changeover device Contour milling unit (fine milling) CNC-controlled FK 31 (30 m/min), recently added after technological overhaul Multi-profile scraper unit (CNC-controlled) MN 21 (servo) Finishing unit (flat scrapers + smoothing unit) FA 11 Universal milling unit for grooving/rebating and profiling UF 11 (1 x 4 kW) M.03) FEEDING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Stanje: rabljeno, Leto izdelave: 2005, številka stroja/vozila: 0-201-10-2035, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 31.690 h, obremenitev mize: 500 kg, Main technical data: Model: BOF 611 / 34 / 13 / 2R — CNC machining centre with 3 working axes Spindle power: 15 kW, HSK 63 system Working dimensions: X-axis: 3,740 mm (single) / 1,830 mm (pendulum operation) Y-axis: 1,550 mm Z-axis: 300 mm Material feeding options: - Gantry feeder HOMAG OPTIMAT - Twin worktable — possibility of alternating or parallel operation Additional features: Tool magazine: 12 positions Control and software: Flex5 interface and WoodWOP (e.g. version 6.0) for CNC programming Weight and construction: Weight: approx. 25,000 lb (~11,340 kg) Matrix-type twin table system (each 5 × 6 ft) Djdpfx Afow Ilvfjasuu Summary: The HOMAG Optimat BOF 611 is an advanced CNC machining centre for wood, equipped with a powerful HSK 63 spindle (15 kW), three controlled axes. Ideal for precision milling, drilling and machining of large-format components with an automatic feeder (not included) and dual worktable system. Purchaser responsibilities: - Dismantle and prepare the machine for transport - Load the machine onto the truck - Organise transport from the seller’s to the buyer’s location - Organise transport insurance if required The machine can be inspected in operation and is still in daily use. For viewing or video call, please contact us.

Stanje: rabljeno, številka stroja/vozila: 007134, Vrsta pritrjenega roba: tanek rob, močan rob, masivni les Lepljenje: EVA, vroči zrak Spojno rezkanje: da Večnamenska enota: da Zgornja rezkalna enota: da Dsdjt Hmtzjpfx Afaeuu Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 10 kos

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Predstavljamo vam popolnoma avtomatsko linijo za oblaganje robov (EDGEBANDING LINE), ki je naprodaj! Linijo je možno kadarkoli pregledati v obratovanju in je na voljo takoj! HOMAG ENOSTRANSKI ROBILNI STROJ PROFI KAL330/9/A3/WZ, letnik 2013 HOMAG DOVAJALNA MIZA FLEXLINE PROFI TBL100/20/30/F, letnik 2013 HOMAG ENOSTRANSKI ROBILNI STROJ PROFI KAL370/8/A3/WZ, letnik 2016 HOMAG PREČNI PRAVOKOTNI TRANSFER POWER TWL410/25/LQ, letnik 2016 Dusdpfx Afsy Thlzsasu PROFI KAL330 - Rezkalno-univerzalni agregat s prostim prostorom - Lepljenje del A3 Basic - Prost prostor za dodatne obdelovalne agregate - Dodelovalni agregat FA11 Parametri obdelovanca in robov: - Minimalna širina obdelovanca brez roba: v primeru dolžine obdelovanca 60 mm* Debelina 12-22 mm v primeru debeline obdelovanca 23-60 mm 100 mm* *odvisno od dolžine obdelovanca. - Prepust obdelovanca 30 mm - Debelina obdelovanca 12-60 mm - Največja višina roba = obdelovanec + 4 mm debeline - Robni material v kolutu 0,3–3 mm - Največji presek robnega materiala (PVC 135 mm², furnir 100 mm²) - Premer koluta 830 mm PROFI TBL100/20/30/F Fiksna odlagalna stran levo - vklj. transportni valji - premer valja 54 mm - razmik med valji pribl. 60 mm - vklj. stranski transportni trak - elektro-pnevmatsko krmiljena prečna letev - ročno nastavljiva dovajalna letev prek števec - vključen komplet za manjše kose - vključen integriran zračni blazinski pult Parametri obdelovanca: - Dolžina plošče: min. 240 mm / maks. 2500 mm - Širina plošče: min. 120 mm / maks. (TBL../20/30) 3000 mm PROFI KAL370 - Rezkalno-univerzalni agregat s prostim prostorom - Lepljenje del A3 Basic - Prost prostor za obdelovalne agregate - Dodelovalni agregat FA21 Parametri obdelovanca in robov: - Minimalna širina obdelovanca brez roba: v primeru dolžine obdelovanca 60 mm* (debelina 12-22 mm) v primeru debeline obdelovanca 100 mm* (debelina 23-60 mm) *odvisno od dolžine obdelovanca - Prepust obdelovanca 30 mm - Debelina obdelovanca 12-60 mm - Največja višina roba = obdelovanec + 4 mm debeline - Robni material v kolutu 0,3–3 mm - Največji presek robnega materiala (PVC 135 mm², furnir 100 mm²) - Največji premer koluta ¦ 830 mm POWER TWL410/25/LQ - Fiksna odlagalna stran dovod: levo, izhod: levo - Premer valja 64 mm - Razmik valjev 110 mm - Dovozni valjčni transporter s trakom in prečnim transportom - Prečni transporter z motornim pogonom - Odvodni valjčni transporter - Prečni transporter z motornim pogonom - Elektro-pnevmatsko krmiljena prislonska letev - Lateralni transportni trak - Ročno nastavljivo odstopanje plošče Parametri obdelovanca: - Dolžina plošče min. 240 mm / maks. (TDL../25/..) 2500 mm - Širina plošče min. 240 mm - Debelina plošče min. 8 mm / maks. 60 mm - Največja teža plošče 80 kg

Stanje: rabljeno, številka stroja/vozila: 008479, Maks. obdelovalna širina: 1650 mm Djdjy Edqwepfx Afajuu Min. obdelovalna debelina: 3 mm Delovna miza: fiksna višina Število delovnih enot: 4 kos

Stanje: rabljeno, številka stroja/vozila: 008495, Delovno območje os X: 3050 mm Dujdey Edqqjpfx Afaeu Delovno območje os Y: 1400 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 11 kW Število kontroliranih osi: 4 osi Največja višina roba: 45 mm Število vrtalnih vreten: 21 Število mest za orodja: 12

Stanje: rabljeno, Leto izdelave: 2021, vhodna napetost: 400 V, vhodni tok: 17 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Ponujamo to rabljeno robno lepilko HOMAG EDGETEQ S-240, leto izdelave 2021. Priložen je dvovrečni odsesovalec ostružkov KOGI 2,2 kW / 1650 Pa. Stroj ima dodaten rezervoar za lepilo. V priloženem PDF-ju je cenitveno poročilo. Dusdpfx Afey Exwfeaeu Tip: EDGETEQ S-240 PROFI KDF 230 Številka stroja: 0-261-73-7111 Leto izdelave: 2021 Shema ožičenja: 0-261-73-7111 Napetost napajanja: 400Y/230 V Število faz: 3 Frekvenca: 50 Hz Maksimalni tok pri polni obremenitvi: 17,3 A Varnilka: 20 A Kratkostični tok: 5 kA Krmilna napetost: 24 V Zaščita ohišja: NEMA 1 Največji motor: 4,6 A Največji tok grelca: 2,3 A Za dodatna vprašanja ali informacije nas kontaktirajte po sporočilu ali telefonu.

Stanje: zelo dobro (rabljeno), PC-krmiljenje Power Control PC85T Programska oprema WoodWOP + TOPDRILL Št. 2 prehodnih motoriziranih transportnih trakov Št. 2 horizontalni vrtalni nosilci (digitalni prikaz podatkov o položaju za osi) Št. 1 vrtalna enota za vsak horizontalni vrtalni nosilec (1 x 1,5 kW) Št. 21 vreten za vsako horizontalno vrtalno enoto Največja delovna širina (mm) 2500 Najmanjša delovna širina (mm) 250 Št. 4 spodnji vertikalni vrtalni nosilci (digitalni prikaz podatkov o položaju za osi) Št. 2 vrtalni enoti za vsak spodnji vertikalni vrtalni nosilec (2 x 1,5 kW) Dsdpfxeyv Ev As Afajuu Št. 4 zgornje vertikalne vpenjalne enote za obdelovance Transportni trak za odvoz odrezkov Skupna priključna moč (kW) 35

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 40 mm, dolžina obdelovanca (maks.): 2.500 mm, največja debelina roba: 3 mm, teža obdelovanca (maks.): 50 kg, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Workpiece thickness: 12 - 40 mm Duedox Ezz Hjpfx Afaou Minimum workpiece size (L x W): 250 x 240 mm Maximum workpiece size (L x W): 2,500 x 1,200 mm Maximum workpiece weight: 50 kg Edging material (coil stock) - material thickness: 0.4 - 3 mm Maximum edge cross-section (plastic): 135 mm Maximum edge cross-section (veneer): 100 mm Maximum coil diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0.6 mm Longitudinal processing speed: up to 30 m/min for thick edge up to 3 mm Cross-processing speed: up to 30 m/min for panel sizing Cross-processing speed: up to 20 m/min for edge processing Minimum distance between workpieces: 500 mm MACHINE DETAILS Connected load: 6.6 kW (double planer longitudinal/cross) Standard milling unit: 6.6 kW EQUIPMENT Top/bottom separation agent spraying unit A3 gluing station with 2 rollers FF12 profile milling unit top/bottom, motors 12,000 rpm FA11 finishing unit top/bottom Continuously adjustable stop cams with max. cam stroke of 25 mm Pre-milling unit: 0.55 kW PUR OTT 2-kg melting station