Procesor poti

HOMAG 2

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit Cgsdpfxeyqybus Afnsp 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Leto izdelave: 2025, stanje: novo, Nadomestni deli za izravnalni stroj Celaschi Cgodpfx Afsfiv Tpsnep

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, delovna širina: 1.935 mm, število vreten: 40, višina plošče: 350 mm, delovna dolžina: 6.200 mm, število osi: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in the tool magazine: 22 (at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X-direction: 4 Spindles for horizontal drilling in Y-direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer Cgodpfx Afsyqx U Henjp MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum pods for securing the workpiece Safety mats at the front Vacuum pump Chip conveyor Fixed grooving unit for grooves in X-direction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and accepts responsibility for installation, securing, and use of the machine at the destination. External reference: 8105

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003529 - Koda proizvajalca: 2-083-01-5513 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoča - Združljiv stroj: - V primeru zanimanja nudimo storitev servisa, kontaktirajte nas. 1KG 20X20X20 Cgjdpfx Afsymfk Tsnep

Stanje: rabljeno, Machine Description: Spiral Conveyor Manufacturer: PURATEX Anlagetechnik GmbH Model: SS D 280 R / 6150 Year of manufacture: 2008 Rotational speed: 28 rpm Trough width: 280 mm Conveying length: 6150 mm Screw diameter: 240 mm Suitable for conveying / dosing: Sewage sludge or similar sludge Drive motor: 3 kW Conveying capacity: 3 kW Dimensions: L 6,600 x W 400 x H 1,600 mm Unladen weight: 800 kg Technical documentation: Yes Remarks: Trough made from stainless steel, spiral made from standard steel, pitch angle 22°, throughput for sewage sludge 1.5 - 2.0 m³/h Accessories: Slewing ring (swivelling) Condition: Used Price: On request Cjdsrpmgfopfx Afnsgp

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003528 - Koda proizvajalca: 2-083-01-5516 - Stanje: Kot novo (razstavni kos) - Funkcionalnost: Popolnoma delujoče - Združljiv stroj: - V primeru interesa nudimo servisni pregled, kontaktirajte nas. 1KG - 20X20X20 Cedpfjymfivsx Afnegp

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ferwood koda: RS0003497 - Koda proizvajalca: 2-083-01-0116 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Združljivost z napravami: - Če vas zanima, nudimo storitev servisa, kontaktirajte nas. Csdpfx Afsymd Udsnogp

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 260 mm, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 260 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 4.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, premer gredi: 40 mm, število vreten: 5, vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Profimat 23 E Delovna širina: 260 mm, Delovna višina: 170 mm, 5 vreten, Premer vretena: 40 mm, Razporeditev vreten: 1- Spodaj - 5,5 kW Cgjdpfoyc Nubjx Afnep 2- Desno + 3- Levo - 11 kW 4- Zgoraj - 5,5 kW 5- Spodaj - 11 kW Pomik: 6 – 24 m/min - 4 kW Zračni jastuk v mizi En pogonski valj v mizi pri izhodu. Z orodjem.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: AGG0145 - Koda proizvajalca: 2-056-10-3300 - Stanje: rabljeno - Funkcionalnost: ni preizkušena - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Cjdpfx Afownrdqsnjgp

Stanje: rabljeno, Leto izdelave: 2005, Enostranski robni lepilni stroj, namenjen natančnemu in stabilnemu lepljenju masivnih in ploščnih materialov (iverne plošče, MDF, laminat). Stroj je oblikovan kot kompaktna, a popolnoma opremljena rešitev za malo- in srednjeserijsko proizvodnjo s poudarkom na kakovosti obdelave robov. Masivni litoželezni okvir zagotavlja visoko togost stroja in dolgoročno geometrijsko stabilnost. Stroj je opremljen s klasičnim neprekinjenim transporterjem s pritisnim trakom in popolnim naborom obdelovalnih agregatov za končno obdelavo roba v enem prehodu. Tehnična sestava stroja: Predrezkalna enota Ogrevanje materiala Samodejni dozirnik EVA lepila Nanašalni valj EVA Cgodpoyfw Sysfx Afnjp Odrezovalne žage (sprednja in zadnja) Groba rezkalna enota Zaokroževalna enota Radijska strgala Strgalo za lepilo Rezkalni agregat za utore Krtačna enota Povratni transporter

Stanje: rabljeno, Leto izdelave: 2007, skupna višina: 1.200 mm, skupna dolžina: 3.600 mm, skupna širina: 1.480 mm, - Machine available from: 2025-12-15 Cgedjx Ei Syjpfx Afnep - Year of manufacture: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units: 8 - └ 1st unit type: Pre-milling unit - Tools included: Yes - └ 2nd unit type: Glue application unit - └ 3rd unit type: Pressure rollers - Tools included: Yes - └ 4th unit type: End trimming unit - Tools included: Yes - └ 5th unit type: Coarse milling unit - Tools included: Yes - └ 6th unit type: Radius scraper unit - Tools included: Yes - └ 7th unit type: Flat scraper unit - Tools included: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Power consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (L x W x H) - Transport packages: 4 Financial information VAT: The listed price is plus VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Stroj za lepljenje robov, izdelan leta 2009. Ta HOMAG PROFI KAR310/11/A20/S2 je opremljen s povratnim sistemom za obdelovance BARBARIC. Razmislite o priložnosti za nakup tega stroja za lepljenje robov HOMAG PROFI KAR310/11/A20/S2. Za več podrobnosti nas kontaktirajte. • Stanje: rabljeno Cgedpfx Afoyhqi Dsnop Dodatna oprema • BARBARIC povratni sistem za obdelovance

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last maintenance by Homag in 11/2024) Equipment and technical data: - Minimum workpiece thickness: 12 mm - Maximum workpiece thickness: 60 mm - Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) - Edge thickness min: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max: 3 mm (coil material) / 20 mm (strip material) - Feed speed: infinitely variable, 18–25 m/min (frequency controlled) - Adhesive type: EVA hot-melt glue - Glue application (pot / cartridge / nozzle): melting unit with granulate container - Glue capacity / cartridge size: granulate container, melting performance 18–35 kg/h, level regulated - Heat-up time: approx. 8–10 min - Edge magazine (slots): 2 rolls (automatic roll change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: cross-cutting unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) - Chamfer / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in finishing unit FA11 - Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW - Workpiece preheating: available - Release agent spray unit: top / bottom, type 2929 (F.01) - Extraction ports: several Ø 100 mm (individual extraction for each unit) - Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant according to EC Directive 98/37/EC Dimensions / Space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the pictures is not included in the scope of delivery! Availability: short-term Cgsdpfswx Aaqjx Afnop Location: 63934 Röllbach