Ogrevalne naprave in pihala nakup rabljenega (273)

Stanje: rabljeno, Temperirna enota, Enota za temperiranje tekočin, Industrijska temperirna enota, Termolator, Tool-Temp TT134, Rabljeni stroj Proizvajalec: Tool-Temp Tip: TT 134 Skupne dimenzije: 390 x 1030 x 1070 mm Leto: 2012 Lastnosti: • Samokontrolni sistem (mikroprocesor) • Samodejni sistem praznjenja • Nadzor in prikaz temperature • Samodejno polnjenje z vodo • Daljinski in notranji nadzor temperature • Samodejno odzračevanje • Delovanje z vodo ali oljem Godpfjx Emd Tox Ab Teca Maks. temperatura: 140 °C | 18–24 kW Hlajenje: 50.000 kcal/h Maks. tlak črpalke: 4 bar | 100 l/min

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h Godpfx Aevz Hq Teb Teca - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, moč: 400 kW (543,85 KM), Oprema: Na voljo je tipska ploščica, We are selling our 400 kW heating boiler. We used it to supply heat to our drying chambers. As we no longer have them, the boiler is no longer needed. The scope of supply includes: - Moving floor - Registration/documentation - Boiler - Ash conveyor with container - Various pipework - Heating control system Gcsdpfoq U R Sgex Ab Toa Price is excl. 20% VAT, ex works, excluding dismantling, loading, contract drafting, and customs clearance costs. The boiler can, of course, be inspected by appointment. Since there is no longer a heat consumer, test firing or demonstration is not possible. Due to the building design, removal of the boiler will likely only be possible via the roof. The boiler was inspected by a specialist company on June 5, 2024. It is ready for operation and fully functional.

Stanje: zelo dobro (rabljeno), Viessmann Vitoplex nizkotemperaturni ogrevalni kotel 350 kW. Možna uporaba oljnega ali plinskega gorilnika. Na voljo kot ogrevalni kontejner ali prikolica. Celoten sistem je mogoče uporabiti tudi kot zasilno ogrevanje. Gcsdpex A Ipcofx Ab Tea

Stanje: dober (rabljeno), Manufacturer: Systema Type: H100 Gsdpji D Dkdofx Ab Toca

Stanje: novo, Leto izdelave: 1988, For sale: A mobile industrial fan from the GDR era, manufactured by VEB MAW Armaturenwerk Wehrsorf (Zittau), driven by a 0.75 kW motor made in the USSR. Robust steel construction on wheels – ideal for dedusting, blowing, local ventilation, or machine cooling. Gcedpfxjud R Iio Ab Toa Technical specifications: • Airflow capacity: 1020 m³/h • Total pressure: 834 N/m² • Static pressure: 681 N/m² • Density: 1.20 kg/m³ • Speed: 2800 rpm • Power requirement: 0.5 kW • Max. operating temperature: 35°C • Year of manufacture: not specified – likely 1980–1990 Motor: • Type: АИР71А2УЗ • Power: 0.75 kW • Speed: 2820 rpm • Voltage: 220/380 V • Protection class: IP54 • Origin: USSR Advantages: • Compact and mobile design • Fully functional drive, ready for operation • Suitable for workshops, paint shops, ventilation, and burners

Stanje: rabljeno, Leto izdelave: 2013, Popolnoma delujoč. Možno ga je neposredno vključiti v ogrevalni krog. Gjdpfx Abjxxlzhj Tjca

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution. Gcodpfx Abovz Hq Hs Toa

Stanje: novo, Leto izdelave: 2025, Generator vročega zraka, toplozračna peč, delavniška peč, ogrevanje hal, modeli F28, F55CV, F85CV, F120CV NOVE stroji Takojšnja dostava -30 % POPUST na stroje z takojšnjo dostavo CE-uredba: DA Izjava o skladnosti EU: DA Navodila za uporabo: DA Približna ogrevana površina F28: 100/150 m² Gcjdpfx Aboh U A Uao Toa Približna ogrevana površina F55CV: 300/350 m² Približna ogrevana površina F85CV: 450/500 m² Približna ogrevana površina F120: 600/700 m²

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MRG 2500 4G, obratovalna temperatura: 95 °C, skupna višina: 4.700 mm, skupna dolžina: 5.000 mm, skupna širina: 1.980 mm, AHENA 3 MW Chip-Fired Steel Boiler for Sale A brand-new AHENA steel boiler with a nominal capacity of 3 MW is for sale. The unit features a four-pass flue gas system, horizontal flue tubes, and an automatic moving grate feed system. It is ideal for the combustion of solid fuels such as bark and wood chips. Key Features: • Output: 3 MW nominal capacity • Year of manufacture: 2024 • Fuel: Bark and wood chips, max. particle size G100 • Heat transfer: Water-cooled system, max. temperature +95°C, 2 bar operating pressure • Flue Gas Passes: Four-pass system (2 passes through tubes, 2 through combustion chamber) • Weight: 16,000 kg • Dimensions: Height 2600 mm (with base 4800 mm), width 2000 mm, length 5500 mm Boiler Specifications: • Model: MRG 2500 4G • Combustion Chamber: Large furnace with water-cooled walls, minimum 110 mm thick refractory lining • Maintenance: Rear inspection door and front cleaning door for regular ash removal • Connections: Flanged connections for hot water flow and return, flue gas duct connection, cleaning brush Gcodpfxjua D Twj Ab Tsa • Water Content: Approx. 11,000 liters • Flue Gas Volume: 15,000 m³/h at 250 °C • Heat Exchange Surface: 155 m² • Combustion Chamber Volume: 8.3 m³ • Water Connections: DN200 Auxiliary Systems: 1. Moving Grate Burner: • Water-cooled base, fully insulated and refractory • Grates made of heat-resistant steel containing chromium • Hydraulic operation, divided into zones with fans 2. Ash Removal System: • Water-cooled ash auger with water circulation pump 3. Hydraulic Push-In Feed System: • Robust steel plate construction, with fire protection valves 4. Electrical Control and Regulation Cabinet with PLC: • 15” touchscreen display, inverters, and lambda sensor 5. Compressed Air Tube Cleaner (optional): • With electric valves and electronic sequencer 6. Flue Gas Extractor and Multicyclone Particle Filter: • Centrifugal extractor and inertial dust separator 7. Flue Pipe and Chimney: • Stainless steel flue pipe and galvanized carbon steel chimney This boiler is an excellent choice for high efficiency and environmentally friendly operation. Located in Cegléd, Hungary.

Stanje: dober (rabljeno), Manufacturer: Systema Gedpfxei D Dkaj Ab Teca Type: H100

Stanje: zelo dobro (rabljeno), Gas and oil burners, oil burner filter, heating oil filter, filter and deaerator unit, heating oil deaerator Gcedpomiqmrsfx Ab Tea - Manufacturer: Oilon, filter and deaerator unit unused in original packaging - Type: Oilon Plus - Technical data: see type plate photo - Carton dimensions: 370/180/H150 mm - Weight: 1.8 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 100.193.V.20, moč: 100 kW (135,96 KM), obratovalni tlak: 3 letvica, Oprema: Na voljo je tipska ploščica, dobro vzdrževan ogrevalni kotel z dvema dodatnima hranilnikoma tople vode naprodaj zaradi prehoda na daljinsko ogrevanje Gcodpfx Aoxt Etysb Toa

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. Gedpfx Abjvz Hqyo Teca MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, For sale is a fully functional and very well-maintained oil burner WEISHAUPT WM-L10 (800 kW), year of manufacture 2007, as well as a new, unused, and originally packaged oil burner ECOFLAM MAIOR P60 PR TL (710 kW), a new, unused, and originally packaged oil burner FERRO (RIELLO) (1186 kW), and a well-maintained oil burner WEISHAUPT L3Z-A (775 kW). 1. WEISHAUPT (top condition) Output: 250–800 kW Gcsdpeh Dp Rwefx Ab Tea Heating oil EL: 21–67.2 kg/h Year of manufacture: 2007 2. ECOFLAM Output: 415–710 kW Heating oil: 35–60 kg/h Year of manufacture: 2018 3. FERRO Output: 356–711–1186 kW Year of manufacture: 2012 4. WEISHAUPT (L3Z-A) Output: 120–775 kW Heating oil EL: 10–65 kg/h Year of manufacture: 2001 - Delivery available on request - All technical data can be seen in the photos Preferably sold to dealers, commercial buyers, or for export. All information provided without guarantee. Subject to prior sale and errors. The seller accepts no liability for typographical or data transmission errors. We are, of course, happy to handle all formalities.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna masa: 90 kg, skupna dolžina: 4.900 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, gorivo: gospodinjski plin H, vhodna frekvenca: 50 Hz, Solaronics TUE 23 U Industrial Infrared Heaters (Dark Radiant Heaters) 23 kW – multiple units available Year of manufacture: 2020–2022 Gcsdsq Hu Afepfx Ab Toa Heating capacity: 23 kW Gas burner + exhaust fan Tube length: 2 x 4.9 metres G20.1 rated connection pressure: 25 mbar Rated gas consumption: approx. 2.5 m³/h Gas connection: 1/2" Rated voltage: IP21, AC 230V, 50Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Heat Exchanger Godpfxsivqmde Ab Tjca - Application: Biogas plant; waste heat recovery - Pipe diameter: DN160 - Temperature range: 0 °C to +90 °C - Example values: - Water flow rate: 12 m³/h, inlet temperature: 78°C, outlet temperature: 50°C - Manure flow rate: 10 m³/h, inlet temperature: 14°C, outlet temperature: 45°C - Dimensions: 5680/500/H2050 mm - Delivery time: 3–4 weeks

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm Gedpovz Hqtjfx Ab Tjca - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Radiant Tube Heater – MULTIPLE UNITS – Warehouse Heater Gcedpfxsn Uvgis Ab Tja Manufacturer: BLACKHEAT BH 50 Production Year: 1997–2002 Heating Capacity: 45 kW Gas Type: G20 Nozzle Diameter: 6 mm Nozzle Pressure: 8.7 mbar Tube Length: 9–12 meters p-Connection: 360 mbar Connection Voltage: Max. Power Consumption: Protection Class: IP30 AC 230 V, 50 Hz

Stanje: dober (rabljeno), Leto izdelave: 1994, Electric heat exchanger, swimming pool heater, heat exchanger - 400 VAC 26.0 A - Max. pressure: 3 bar - Dimensions: 980/180/H180 mm Gedpfx Abjb A H S Eo Tsca - Weight: 3.1 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Gsdpfovz Hqmox Ab Toca Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Izmenjevalec toplote, gradbiščni grelec, gradbeni sušilnik, ogrevanje, industrijski grelec, izmenjevalec za toplo vodo, grelni ventilator, ogrevanje, izmenjevalec toplote, zračni grelec, kanalni zračni grelec, kanalni izmenjevalec toplote, grelni register. - Čisti izmenjevalec toplote, uporaben samo v kombinaciji z ogrevalno napravo (npr. Wacker Neuson HP 252) Gcodpfxoghh Txe Ab Tsa - Tip: HX 60 - Moč: 43,5 kW - Količina: 8 kosov na voljo - Cena na kos - Dimenzije: 660/720/H1065 mm - Teža: 106 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Gcedevz Hqgopfx Ab Toa Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: dober (rabljeno), Leto izdelave: 1981, Heater, burner, gas burner - Gas type: natural gas, liquefied - Gas connection: 20 mbar to 1000 mbar - Rated thermal output: 3590 kW Gcedpfx Ajb A Iy Deb Tsa - Blower motor: 5.5 kW - Weight: 160 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm Godpfx Abevz Hhxo Teca - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.