Ogrevalne naprave in pihala nakup rabljenega (263)

Stanje: dober (rabljeno), Weishaupt RL30/2A version EM oil throughput 195 kg/h Bdedeig Tw Eepfx Akrsc

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Weishaupt dual-fuel burner GL5/1-D Year of manufacture: 1990 Stock or used equipment sourced from decommissioned companies that were operational until shutdown. Viewings by appointment only—please call in advance! Preference given to sales to dealers, commercial customers, or for export. All information provided without guarantee; subject to prior sale and errors excepted. The seller assumes no liability for typographical or data transmission errors. Bdsdpfx Asi Ar Ezskrsc We are, of course, able to handle all formalities. Loading and shipping available.

Stanje: zelo dobro (rabljeno), Gas burner G3/1D Weishaupt 7 units available Output: 630 kW Year of manufacture: 1997 to 2004 We speak Russian! Viewing by prior telephone arrangement only! Preferred sale to dealers, tradespeople, or for export. All information provided without guarantee; subject to errors and prior sale. Bdodei Dh Icepfx Akrec The seller accepts no liability for typographical or data transmission errors. We are happy to purchase your used boiler or burner! Naturally, we also handle all formalities. Loading available.

Stanje: zelo dobro (rabljeno), Weishaupt G11/1D gas burner, output 5100 kW. 2 units available. Stock items or used equipment from decommissioned companies that were in operation until the end. Viewing by appointment only! Preferred sale to dealers, commercial operators, or for export. All information provided without guarantee; errors and prior sale excepted. The seller assumes no liability for typing or data transmission errors. Of course, we also handle all formalities. Bdjdpfx Asi Dw Hbokrjc Loading and shipping possible.

Stanje: zelo dobro (rabljeno), Heating boiler Viessmann Vitomax 2100 kW. Weishaupt incl. dual-fuel burner. Bdsdpfomnqtcsx Akrjc

Stanje: zelo dobro (rabljeno), Viessmann Vitoplex 105 kW nizkotemperaturni kotel (0025) na olje ali plin Bdjdsxqr Aispfx Akrjc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Vitoplex 300 105 kW Bdodpfx Aotu Tv Aekroc Leto izdelave: 2006 Tip: TX3 Moč: 105 kW Z možnostjo plinskega ali oljnega gorilnika Ogled možen samo po predhodnem telefonskem dogovoru! Prednostna prodaja trgovcem, podjetjem ali za izvoz. Vse informacije so brez garancije, pridržujemo si pravico do napak in predhodne prodaje. Prodajalec ne prevzema nobene odgovornosti za pravopisne ali prenosne napake. Seveda uredimo tudi vse formalnosti Nakladanje možno Za več informacij nas kontaktirajte

Stanje: zelo dobro (rabljeno), Buderus G 605 nizkotemperaturni kotel, 1020 kW Bdsdpfxewynuie Akroc

Stanje: zelo dobro (rabljeno), Viessmann Paromat Triplex 460 kW nizkotemperaturni kotel, možna uporaba oljnega ali plinskega gorilnika. Bjdpfxox Htifs Akrjdc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, MS7Z Weishaupt burner Output: 450-1965 kW Year of manufacture: 2003 Мы говорим по-русски! (We speak Russian!) Inspection only by prior telephone arrangement! Preferred sale to dealers, commercial operators, or for export. All details are without guarantee. Errors and prior sale reserved. The seller assumes no liability for typing or data transmission errors. We are happy to purchase your used boiler or burner! Naturally, we also take care of all the necessary formalities. Bdjdjvgmg Sepfx Akrjc Loading possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Prodam toplotno centralo AHENA. V zelo dobrem delujočem stanju. Bjdpfx Ajxf Nyhjkrjdc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Weishaupt burner Type: G70/4-A Version: ZM-NR Year of manufacture: 2017 Output: min. 1000, max. 11,700 kW Electric power: 23.89 kW Operating hours: approx. 30,000 h Weight: approx. 300 kg Bdjdpfjv S Aalex Akrec

Stanje: novo, - NEW - Without side cladding and without base frame Kanuk® Original Hot Air Furnace - Firebox opening H x W (cm): 31 x 31 - Flue outlet: top / rear - Efficiency (%): 83.9 - Log length (cm): 48 - Minimum draft (Pa): 16 - Ash drawer: No - BimSchV Stage 2: Yes - Lignite briquettes: No - CE mark: Yes - Total output (kW): 17.7 - Room heating capacity (m³): 540 - Viewing window (cm): 24 x 14 - Weight (kg): 153 - Wood consumption (kg/h): 4.2 - Flue gas throttle: No - Type 1 (self-closing door): Optional - Firewood, wood briquettes: Yes Bodpfx Asvyd Awjkrsdc - AT §15a B-VG standard: Yes - External air connection (mm): 80 mm - Dimensions H x W x D (cm): 80 / 58 / 95 - Flue outlet (mm): 160 - Door diameter (cm): 28 - Flue gas temperature (°C): 232 - Flue gas mass flow (g/s): 14.28 - Firebox H x W x D (cm): 40 x 44 x 49.5 - Airwash system: Yes - DIN EN number: 13240 - Primary, secondary, tertiary air: Yes - Swiss LRV: Yes No. 2100108

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm Bodpfxevz Hq Tj Akrjdc - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 Bsdsvz Hq Hjpfx Akrjdc The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. Bdjdpfevz Hqyox Akrsc All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ Bodpfx Akjvz Hqtersdc - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h Bjdpfovz Hqmox Akredc - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal Bjdpovz Hqgefx Akrodc - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. Bodpovz Hhxofx Akrsdc - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Leto izdelave: 2016, stanje: kot nova (razstavni stroj), številka stroja/vozila: 00069, Präzisions-Temperaturregelgerät (TCU) – BOFA Baujahr: November 2016, Seriennummer 00069, ausgezeichneter Zustand, Filter in gutem Zustand, elektrische Dokumentation des TCU vorhanden, Kältemittel: R134a 0,75 kg im System Das Präzisions-Temperaturregelgerät wurde speziell für Anwendungen mit Lotpaste entwickelt. Reverse-Flow-Air-Technologie (RFA) erhöht die Filterleistung und verlängert die Lebensdauer. Prozessüberwachung durch Temperatursensoren, die flexibel im Drucker montiert werden können. Das TCU wurde entwickelt, um spezielle Prozessanforderungen in der Elektronikindustrie zu erfüllen. Für die zuverlässige Platzierung von SMD-Bauteilen während der Leiterplattenbestückung ist es entscheidend, dass bereits in der Druckphase die Lötpaste konstant eine Temperatur hält, die optimale Ergebnisse liefert. Da mittlerweile weltweit montiert wird, schwanken Klima und Fabrikbedingungen so stark, dass dieser Optimumswert ohne gezielte Steuerung oft nicht einzuhalten ist. Das TCU ist mit Kühl- und Heizeinheiten ausgestattet, die dafür sorgen, dass die Umgebungstemperatur im Druckbereich unabhängig von der Umgebungstemperatur immer bis auf 1°C genau konstant gehalten wird. Reverse-Flow-Air-Technologie (RFA): Durch die RFA-Technologie wird die Luftgeschwindigkeit verringert und die Strömungsrichtung umgekehrt. Größere Partikel setzen sich vor dem Filter ab und gelangen so nicht in das Filtermedium. Dadurch erhöht sich die Filterlebensdauer signifikant und die Filtrationsleistung bleibt konstant hoch. Technische Spezifikationen: 1. Kühleinheit 2. Kondensat-Sammelbehälter 3. Luftauslass 4. Lufteinlass 5. Lenkrollen 6. Servicetür mit Schloss 7. Fehler-Kondensatsensor 8. Montagesockel für vierfarbige Statusleuchte Technische Daten: Luftführung: Umluftsystem Temperaturbereich: +/- 8°C von Umgebungstemperatur im programmierbaren Bereich 19–30°C Temperaturregelung: +/- 1°C Kühlleistung: 2.000 W Temperatursensor: Gemeinsames Signal vom integrierten Druckersensor (0 – 10 V Eingang für 0–50°C) Lufteingangsfilter: G4 (91 % Durchschnittsab scheidung) EN 779:2002 Kältemittel: R134a 0,75 kg Nennstrom: 12,6 A Anlaufstrom: 20 A Frequenz: 50/60 Hz Spannung: 230 V +/-10 % (207–253 V Arbeitsbereich) Einphasenbetrieb Schalldruckpegel: über 75 dBA* Abmessungen: 1.285 mm (H) + (Signalleuchte 450 mm), 540 mm (B), 670 mm (T) Kondensat: Sammlung in 5-Liter-Behälter zur Entsorgung oder mit Ablaufleitung Gewicht: 140 kg Dokumentation: Elektrischer Schaltplan enthalten Verkaufspreis: 1.900 Euro + MwSt., verhandelbar, FCA Oradea, Rumänien Bsdpfjhgfnbox Akrjdc Irrtum, Änderungen und Zwischenverkauf vorbehalten. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim romana.

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), številka stroja/vozila: 181941, Sistem za dovod zraka: Recirkulacijski Temperaturno območje: +/- 8°C od okolice, programsko nastavljivo v razponu 19 – 30°C Upravljanje temperature: +/- 0,5°C Hladilna moč: 2000W Bdodpfxehg Rcxe Akroc Tipalo temperature: izhod iz integriranega tiskalniškega tipala (0 – 10V vhod za 0 – 50°C) Vhodni filter zraka: G4 (91% povprečna učinkovitost) po EN 779: 2002 Hladilno sredstvo: R134a, 0,75kg Polna obremenitev: 12,6A Začetni tok: 20A Frekvenca: 50 / 60Hz Napetost: 230V +/- 10% (delovno območje 207V – 253V), enofazno Akustični hrup: > 75dB Dimenzije: 1300 mm višina (+ signalna svetilka), 510 mm, 540 mm Kondenzat: zbira se v 5-litrskem rezervoarju za izpraznitev ali se odvaja v odtok Teža: 100 kg Dokumentacija ni priložena TCM je natančni modul za uravnavanje temperature, zasnovan za izboljšanje tiskovnega procesa z izjemno stabilnim in natančno nadzorovanim zrakom v tiskalnikih DEK. Delovno območje TCM omogoča širok razpon upravljanja temperature procesa glede na temperaturo okolice v tovarni. Zaradi vse bolj raznolikih aplikacij je za doseganje visoke kakovosti rezultatov pomembno, da je možno tako ogrevanje kot tudi hlajenje zraka glede na temperaturo v prostoru. Pri tisku lepil je na primer optimalna temperatura med 25 in 30°C, kar je običajno višje od klimatizirane temperature v tovarni. Kondicioniran zrak se iz TCM vodi v tiskalno območje ter se vrača po kanalih pod tiskalnikom. Oblikovanje kanalov omogoča minimalno hitrost pretoka zraka prek območja procesa, s čimer se podaljšuje lepljivost spajkalne paste in življenjska doba šablon. Zaradi optimizirane zasnove in recirkulacijskega sistema je TCM energetsko učinkovit in za delovanje potrebuje minimalno električno moč iz enofaznega omrežja. Zrak se izpihuje skozi zgornji del TCM, zato povezava z odvodnim sistemom tovarne ni potrebna. TCM se samodejno izklopi po določenem času, če je tiskalnik izklopljen ali če so pokrovi odprti. Za spremljanje temperature procesa TCM uporablja izhod tiskalnikovega integriranega temperaturnega tipala na vozičku, kar omogoča natančen nadzor in povratne informacije. Da bi preprečili kontaminacijo procesa, kondicioniran zrak pred vstopom v tiskalnik potuje skozi filter. Dodatno se možnost onesnaženja zmanjša, saj TCM vzdržuje višji zračni tlak v notranjosti tiskalnika v primerjavi z okolico, zato tujki težje vstopijo. Stanje modula je prikazano z jasno vidno štiribarvno signalno svetilko. Vsak nastali kondenzat je možno izpustiti v odtok ali pa ga zbirati v lahko izpraznljivem 5-litrskem rezervoarju. Dva senzorja spremljata nivo kondenzata in po potrebi sprožita opozorilo preko signalne svetilke. Če rezervoar ni izpraznjen, se TCM samodejno izklopi in tako prepreči razlitje. Prodajna cena: 1.900 EUR + DDV, po dogovoru, FCA Oradea, Romunija Pridržujemo si pravico do napak, sprememb in predhodne prodaje.

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), številka stroja/vozila: 2310-028, Präzisions-Temperaturregelgerät (TCU) – BOFA Baujahr: November 2013, Seriennummer 2310-028, hervorragender Zustand, der Filter ist in gutem Zustand, elektrische Dokumentation des TCU vorhanden, Kältemittelgas: R134a 0,75 kg im System. Präzisions-Temperaturregelgerät, entwickelt für Lötpastenanwendungen. Reverse-Flow-Air-Technologie (Umkehrluftstrom) verbessert die Filterleistung und verlängert die Filterlebensdauer. Prozessüberwachung mittels Temperatursensoren, die flexibel innerhalb des Druckers platziert werden können. Das Temperaturregelgerät (TCU) wurde speziell für die Anforderungen in der Elektronikbranche entwickelt. Für ein zuverlässiges Positionieren von SMT-Bauteilen auf Leiterplatten muss die Lötpaste während der Druckphase auf einer Temperatur gehalten werden, die eine optimale Performance sicherstellt. Weltweit unterschiedliche klimatische Bedingungen und Fertigungsumgebungen machen eine gezielte Temperaturkontrolle erforderlich. Bodpfx Aehgg Rrekrodc Das TCU verfügt über Kühl- und Heizelemente, welche die Temperatur innerhalb des Druckumfelds stabil auf ±1°C um den optimalen Einsatzwert halten – unabhängig von der Umgebungstemperatur in der Fertigung. Reverse-Flow-Air (RFA)-Technologie: Durch die RFA-Technologie wird die Luftgeschwindigkeit verringert und die Strömungsrichtung umgekehrt; größere Partikel scheiden sich im Abscheidebehälter des Filters aus. Dadurch gelangt weniger Staub in das Filtermedium, was die Lebensdauer und Effizienz des Filters deutlich erhöht. Technische Spezifikationen: 1. Kältemodule 2. Kondensatsammelbehälter 3. Luftauslass 4. Lufteinlass 5. Lenkrollen 6. Service-Türverschluss 7. Kondensatsensor mit Fehleranzeige 8. Befestigungsplatte für vier-Farben-Warnleuchte Technische Daten: Luftführung: Umluftbetrieb Temperaturbereich: ±8°C um Umgebungstemperatur, programmierbar zwischen 19 – 30°C Temperaturregelung: ±1°C Kühlleistung: 2000 W Temperatursensor: Gemeinsamer Ausgang mit integriertem Druckersensor (0 – 10V Eingang über 0 – 50°C) Lufteinlassfilter: G4 (91% mittlerer Abscheidegrad) EN 779:2002 Kältemittel: R134a, 0,75 kg Betriebsstrom: 12,6 A Anlaufstrom: 20 A Frequenz: 50 / 60 Hz Spannung: 230 V ± 10% (Arbeitsbereich 207 – 253 V), einphasig Geräuschpegel: >75 dBA* Abmessungen: 1285 mm (Höhe) + (Warnleuchte 450 mm), 540 mm (Breite), 670 mm (Tiefe) Kondensat: Sammelbehälter 5 Liter zur Entsorgung oder optional Ableitung direkt zum Abfluss Gewicht: 140 kg Dokumentation: Elektroschaltplan Verkaufspreis: 1900 Euro zzgl. MwSt., verhandelbar, FCA Oradea, Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Englisch / Wir sprechen Deutsch / Beszélünk magyarul / Nous parlons français / Vorbim română.

Leto izdelave: 2016, stanje: Okvarjen nosilec rezervnih delov (rabljen), številka stroja/vozila: 00050, Präzisions-Temperaturregelgerät (TCU) – BOFA DER DISPLAY-CONTROLLER IST DEFEKT! Baujahr: November 2016, Seriennummer 00050, ausgezeichneter Zustand, Filter in sehr gutem Zustand, elektrische Dokumentation des TCU vorhanden, Kältemittel: R134a, 0,75 kg im System. Präzisions-Temperaturregelgerät, entwickelt für Lötpastenanwendungen. Reverse-Flow-Lufttechnologie (RFA) verbessert die Filterleistung und verlängert die Lebensdauer. Bsdpfx Akohgr Ihorsdc Prozessüberwachung durch Temperatursensoren, die strategisch im Drucker platziert werden können. Das Temperaturregelgerät (TCU) wurde entwickelt, um eine sehr spezifische Prozessanforderung im Elektroniksektor zu erfüllen. Für die zuverlässige Platzierung von SMD-Bauteilen während der Leiterplattenbestückung muss bereits beim anfänglichen Druckvorgang die Lötpaste auf einer Temperatur gehalten werden, die eine optimale Leistung sicherstellt. Mit der weltweiten Fertigung führen unterschiedliche klimatische Bedingungen und Fabrikumgebungen dazu, dass das Optimum ohne geeignete Intervention häufig nicht gewährleistet werden kann. Das TCU verfügt über Kühl- und Heizelemente, die sicherstellen, dass die Temperatur im Druckumfeld unabhängig von der Umgebungstemperatur auf +/- 1°C des optimalen Lötpastenniveaus gehalten wird. Reverse-Flow-Air (RFA)-Technologie Die RFA-Technologie bewirkt einen Geschwindigkeitsabfall und Richtungswechsel des Luftstroms. Größere Partikel scheiden aus dem Luftstrom in die Abscheidekammer aus. Weniger Partikel gelangen so ins Filtermedium, was die Filterlebensdauer erheblich verlängert und die Filtrationsleistung verbessert. Technische Spezifikationen 1. Kühlmodul 2. Kondensatauffangbehälter 3. Luftauslass 4. Lufteinlass 5. Lenkrollen 6. Service-Türschloss 7. Ausfall-Kondensatsensor 8. Vierfarb-Leuchtturmhalterung Technische Daten: Luftfördersystem: Umluft Temperaturbereich: +/- 8°C um Umgebungstemperatur, programmierbar im Bereich von 19–30°C Temperaturregelung: +/- 1°C Kühlleistung: 2000W Temperatursensor: Gemeinsames Signal vom integrierten Druckersensor (0–10V Eingang bei 0–50°C) Luftfilter: G4 (91% Durchschnittsab scheidegrad) EN 779:2002 Kältemittel: R134a 0,75 kg Nennstrom: 12,6A Anlaufstrom: 20A Frequenz: 50/60Hz Spannung: 230V +/-10% (Arbeitsbereich 207–253V), einphasig Geräuschpegel: über 75 dBA* Abmessungen: 1.285 mm (H) + (Leuchtturm 450 mm), 540 mm (B), 670 mm (T) Kondensat: Wird in einem 5-Liter-Behälter gesammelt oder kann direkt in den Abfluss geleitet werden Gewicht: 140 kg Dokumentation: mit Schaltplan Verkaufspreis: 1.500 Euro + MwSt, verhandelbar, FCA Oradea, Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Englisch. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français / Vorbim romana.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, moč: 50 kW (67,98 KM), vrsta vhodnega toka: Klimatska naprava, pritisk: 3 letvica, vhodna napetost: 230 V, nazivna toplotna moč: 50 kW (67,98 KM), ogrevalna zmogljivost: 50 kW (67,98 KM), temperatura: 95 °C, kapaciteta rezervoarja: 175 l, obratovalni tlak: 3 letvica, Oprema: Na voljo je tipska ploščica, Nous proposons cette chaudière à gazéification de bois bûches d'occasion Guntamatic BMK 50, année de fabrication 2012. Convient pour des bûches jusqu’à 50 cm. Inclus : 2 ballons tampons isolés Guntamatic (1 600 litres chacun), tuyauterie avec vanne mélangeuse et ventilateur de chauffage Kroll. Type : BMK 50 avec allumage automatique Référence : 066-100 Numéro de série : 315972 Année de fabrication : 2012 Puissance nominale : 20–50 kW Classe de chaudière : 3 Raccordement électrique : 230 V Bedjyf U R Hopfx Akrsdc Intensité électrique : 13 A Pression de service admissible : 3 bars Température de service maximale : 95 °C Tirage de cheminée : 0,2 mbar Contenance en eau : 175 l Combustible : bois bûches naturelles 0,5 m Installation utilisée seulement 4 semaines. Inclut 2 ballons tampons isolés (1 600 l chacun) et un ventilateur Kroll. Installation en état quasi-neuf, visite en fonctionnement possible. Démontage et transport à la charge de l’acheteur. Pour toute question ou information complémentaire, n’hésitez pas à nous contacter par message ou téléphone.