Ogrevalne naprave in pihala nakup rabljenega (276)

Stanje: rabljeno, Thermal System, fan heater, heating elements - Manufacturer: Ziehl-Abegg, axial fan, axial ventilator, heating blower - Axial fan: Type DADL 350/6 Rbedpfx Adsuqf Hzj Tot - Power: kW - Dimensions: Ø 470 x 245 mm - Weight: 9.1 kg

Stanje: dober (rabljeno), Drum tipper, paint bucket tipping device, can tilting unit - Auxiliary device: for decanting paints, coatings, etc. - Holder diameter: 335 mm - Dimensions: 500/360/H1100 mm Redpfx Aoctyq Hjd Tebt - Weight: 10 kg

Stanje: rabljeno, Stainless steel (VA) chimney cap, chimney hood - Internal bracket spacing: 650 mm - Dimensions: 850/955/H335 mm Redpfx Ajh Ra Hnjd Tjbt - Weight: 13.7 kg

Stanje: dober (rabljeno), electric heater, electric radiator, heating coil, electric heating system, panel storage heater, surface-mounted heater -Manufacturer: Wibo, surface-mounted heater type thermatic 1000 with thermostat -Power rating: 1000 Watts -Voltage: 220 V -Quantity: 2 units available -Price: per unit -Dimensions: 800/110/H620 mm -Weight: 20 kg/unit Rodpfx Adjudqcys Tobt

Leto izdelave: 1983, Stanje: rabljeno, mould heating, hot air blower, heater, gas heater, construction site heater, building dryer, heater, hall heater, gas-powered heating for casting moulds, foundry technology -Manufacturer: Junker, gas heating system WA 26532 on mobile transport frame -Burner: Wiedemann B202 H2-3 175 kW -Blower: Spelleken 5.5 kW, air flow rate 500 m³/h -Individual components/accessories: see photos -Dimensions: 1500/1250/H2010 mm -Weight: 625 kg Rbsdpep Hiyasfx Ad Tet

Stanje: dober (rabljeno), Heater blower, mobile heater, gas heater, gas blower - Output: adjustable, 50 kW - Consumption: 2-4 kg/h - Connection pressure: 0.35-3.0 bar - Air flow rate: 1,570 m³/h Rjdpfxeb A S Dae Ad Tobt - Weight: 32 kg

Stanje: dober (rabljeno), Electric heater, electric heating element, heating coil, electric tubular heater - Power: 600 watts 120 volts - Width: 400 mm - Height: 100 mm - Depth: 250 mm Rbedpfxjb S Hr Se Ad Tet - Quantity: 11 units available - Price: per piece - Weight: 4 kg

Stanje: rabljeno, Thermal System, Fan Heater, Heating Elements, Radial Heating Blower - Manufacturer: Karl Klein, Fan with Heating Blower: HVL 150 - Fan: Type ENG 3-6 K/S30 - Output: 100 W / 7.8 m³/min - Heater Attachment: Type 8.0104 1500 W - Inlet: Ø 170 mm Rsdpfjrkp Nxsx Ad Tobt - Outlet: Ø 55 mm - Quantity: 3x blowers available - Price: per unit - Dimensions: 280/250/H270 mm - Weight: 6.2 kg/unit

Stanje: dober (rabljeno), Heating fan, mobile heater, gas heater, gas blower - Output: adjustable from 24.3 to 64 kW - Consumption: 1.5 to 5 kg/h - Connection pressure: 0.6–3.0 bar - Air flow rate: 2,150 m³/h Rbjdpfxeb A S A Ue Ad Tet - Weight: 26 kg

Stanje: rabljeno, Heater fan, heater, heat exchanger, air heater, air heater unit, duct air heater, duct-mounted air heater, heating coil Rbedpfx Aeu Scqbjd Tjt - Manufacturer: Kampmann, air heater heat exchanger with mounting parts - Model: Top 4000 2-stage 153000452036 - Output: 20.3/23.3 kW - Operating pressure: max 10 bar - Quantity: 2x air heater units available, 1x with additional bracket - Price: per unit - Dimensions: 700/680/H1020 mm / 700/680/H900 mm - Weight: 45 kg / 40 kg

Stanje: dober (rabljeno), Toplotni ventilator, ogrevanje, toplotni izmenjevalnik, zračni grelec, kanalni zračni grelec, kanalni toplotni izmenjevalnik, grelni register -Proizvajalec: GEA Happel, zračni toplotni izmenjevalnik -Tip: 4124/403/441 -Moč: kW -Nazivni pretok zraka: ca. 2800 m³/h -Ventilator: Ziehl-Abegg Rbsdpfxju Tlhvs Ad Tet -Obratovalni tlak: maks. 13,7 bar -Količina: 2x zračni grelec na voljo -Cena: na kos -Dimenzije: 885/550/H600 mm -Teža: 90 kg/kos

Stanje: rabljeno, Heat exchanger, heat exchanger, rotary heat exchanger, exhaust air heat exchanger Rbedpfx Aoul H D Rod Tot Heat exchanger: air/air -Manufacturer: Klingenburg, rotary heat exchanger type RRSE 4066/2750 -Rotor: diameter: 2570 mm -Speed: 8 rpm -Dimensions: 4066/2750/H460 mm -Weight: 850 kg

Stanje: zelo dobro (rabljeno), Vitocrossal 620 kW. Kondenzacijski plinski kotel Rbjdpsx I Sq Rjfx Ad Tst

Stanje: novo, Leto izdelave: 2022, FRÖLING Turbomat je popolnoma avtomatski, edinstven ogrevalni sistem, zasnovan za različne vrste lesnih materialov. Poleg lesnih sekancev je primeren tudi za zgorevanje drugih suhih goriv (z do 35 % vsebnostjo vlage, kot so lesnopredelovalni materiali in peleti). Dovod goriva, zgorevanje, čiščenje in odstranjevanje pepela so popolnoma avtomatizirani. Tehnične specifikacije Nazivna toplotna moč [kW]: 550 Premer dimne cevi [mm]: 350 Rbsdpevf Et Iofx Ad Tjt Skupna suha masa z dodatki [kg]: 8470 Kapaciteta izmenjevalnika toplote – voda [l]: 1040 Najvišja dovoljena delovna temperatura [°C]: 90 Najnižja temperatura povratka kotla [°C]: 65 Najvišji dovoljeni delovni nadtlak [bar]: 6 Temperatura dimnih plinov (NL / PL) [°C]: 140/110 Cena ne vključuje stroškov skladiščenja, prevoza, montaže in zagona.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 250 kW (339,91 KM), Toplozračni generator na lesene pelete in/ali lesne sekance z močjo od 250 kW do 500 kW. Primeren za ogrevanje industrijskih hal, stavb in skladišč. Prav tako uporaben za sušilne procese, kot so seno, trava in druge poljščine. Rbodpfx Adsyaly Uj Tst

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. Rsdpfsvz Hq Tex Ad Tjbt All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). Rbedpfx Ajvz Hq Hed Tet - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Rjdpfxovz Hqyo Ad Tebt Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm Rbodpfxovz Hqts Ad Tet - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal Rbsdpfxsvz Hqmj Ad Tst - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. Rodsvz Hqgopfx Ad Tsbt These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm Rbodpfx Adovz Hhxo Tjt - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: zelo dobro (rabljeno), Viessmann Vitoplex kotel za ogrevanje 150 kW (0069) oljni gorilnik Rjdpox Htirofx Ad Tsbt

Stanje: zelo dobro (rabljeno), Viessmann Paromat Triplex 460 kW nizkotemperaturni kotel, možna uporaba oljnega ali plinskega gorilnika. Redpfx Adex Htifo Tsbt

Stanje: dober (rabljeno), Manufacturer: Systema Rbjdpsi D Dkdsfx Ad Tet Type: H100