Oil heater - blower

Kroll M 100

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Chedpfovz Hq Tjx Am Ted Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Typ 500 Motorleistung 3 kW, 1.450 U/min Sägebandlänge 4.100 mm Sägebandbreite 19–38 mm Sägebandgeschwindigkeit 18 m/s Ausladung / max. Schnittbreite 500 mm Maximale Schnitthöhe 350 mm Tischabmessungen 730 x 480 mm Schwenktisch 0°–45° Chsdpfxodzttao Am Tsd Absaugstutzen-Durchmesser 2 x 100 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Kotlovska naprava s posodo za skladiščenje HOVAL MAX-3 Moč: 1750 kW Csdpozp R Nfsfx Am Tshd Letnik izdelave: 2019 Gorilnik: ELCO

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm Cjdpfx Amjvz Hqtj Tohd - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, - NEW - Without side cladding and without base frame Kanuk® Original Chodpfsvyd Awex Am Tsd Hot Air Furnace - Firebox opening H x W (cm): 31 x 31 - Flue outlet: top / rear - Efficiency (%): 83.9 - Log length (cm): 48 - Minimum draft (Pa): 16 - Ash drawer: No - BimSchV Stage 2: Yes - Lignite briquettes: No - CE mark: Yes - Total output (kW): 17.7 - Room heating capacity (m³): 540 - Viewing window (cm): 24 x 14 - Weight (kg): 153 - Wood consumption (kg/h): 4.2 - Flue gas throttle: No - Type 1 (self-closing door): Optional - Firewood, wood briquettes: Yes - AT §15a B-VG standard: Yes - External air connection (mm): 80 mm - Dimensions H x W x D (cm): 80 / 58 / 95 - Flue outlet (mm): 160 - Door diameter (cm): 28 - Flue gas temperature (°C): 232 - Flue gas mass flow (g/s): 14.28 - Firebox H x W x D (cm): 40 x 44 x 49.5 - Airwash system: Yes - DIN EN number: 13240 - Primary, secondary, tertiary air: Yes - Swiss LRV: Yes No. 2100108

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Manufacturer: Veritherm Model: SSK200 Year of manufacture: 2015 Nominal heat output: 220 kW Мы говорим по-русски! (We speak Russian!) Viewing by appointment only — please call in advance! Preferred sale to dealers, traders, or for export. All information without guarantee; subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. We can, of course, handle all the necessary paperwork for you. Loading available. Codpfx Aotuwn Rsm Tjhd